Is it possible to install SQL Server 2012 Standard Edition on a Windows Server 2012 Standard Which is installed on a Virtual Machine that is created by Hyper-V?

Hi
I have recently bought a Virtual Machine from a data center and installed a Windows Server 2012 Standard Edition on it. As I tried to install the SQL Server 2012 Standard Edition, the data center administrator denied me to do this telling me it is not possible
to install any licensed Microsoft software on a Windows installed on virtual machine created by Hyper-V. It was really strange for me! I wanna know if this is true.
Thanks Everybody

Hi Farid,
For SQL server running on virtual server please refer to following article :
http://blogs.technet.com/b/peeyusht/archive/2010/03/19/sql-licensing-under-virtualization.aspx
In addition , for license issue we still recommend you to contact MS Activation Center:
http://www.microsoft.com/licensing/existing-customers/activation-centers.aspx
Best Regards,
Elton Ji
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected] .

Similar Messages

  • Is it possible to restore Windows server 2012 backup to another physical hardware or virtual machine?

    Hi
    I have windows server 2012 which is my domain controller. It has 2 hyper visor virtual machine that they are 2012 too. I have an additional domain controller in another location too.
    I want to know, how can I restore a bare metal or system state backup to another machine, to have a domain controller same as old one whit all the properties, rules and features.
    Thanks

    Hi Mehdi,
    Yes, it is possible to restore Windows backup to a different machine with different hardware. This article, although written for Windows Server 2008 still applies in 2012:
    https://support.microsoft.com/en-us/kb/249694
    Best regards,
    Please remember to mark the replies as helpful if they help, or as answers if they answer your question. Please also unmark the answers if they provide no help.
    Zach Roberts
    Independent Microsoft Community Support Advisor
    Disclaimer: I don't work for Microsoft. Any advice given is my own and does not represent Microsoft.
    Follow me on Twitter:
    @WindowsZach

  • SQL Server 2008 R2: which version of Visual Studio do I need to keep database projects and SSIS projects in the same solution

    I need to build a solution containing a database project and an integration services project for SQL Server 2008R2.  Apparently, the subset of Visual Studio tools that comes with SQL Server 2008R2 does not include database projects and does not have
    Team Foundation Server support.  Because of those limitations, I am trying to determine which version of Visual Studio will allow me to:
    1. Build a single solution that includes both a database project and an Integration Services project
    2. For the database project, be able to import a database schema from an existing SQL Server 2008 R2 database, do schema compares and update the project from the database and vice versa
    3. For the Integration Services project, be able to deploy the packages to SQL Server Integration Services on SQL Server 2008 R2 (that is, to the msdb database).
    4. Use Team Foundation Server for source control of the whole solution, including both project types.

    Hi G Britton,
    To build a solution containing a database project and an integration services project for SQL Server 2008 R2 and use Team Foundation Server for source control.
     You can choose to install Visual Studio 2008.
    And as you want to utilize Schema compare and/or Data compare functionalities in Visual Studio, you will need to install the
    Visual Studio Team System 2008 Database Edition or Visual Studio Team System 2008 Team Suite.
    In addition, for Visual Studio issues, I would like to recommend you post the question in the
    Visual
    Studio forums to get better support.
    Reference:
    Team Foundation Version Control
    Compare and Synchronize Database Schemas
    Interoperability and Coexistence (Integration Services)
    Thanks,
    Lydia Zhang
    Lydia Zhang
    TechNet Community Support

  • INSERTING DATA INTO A SQL SERVER 2005 TABLE, WHICH HAS A IDENTITY COLUMN

    Hi All,
    I have to insert the data into a SQL SERVER 2005 Database table.
    I am able to insert the data into a normal SQL Server table.
    When I am trying to insert the data into a SQL Server table, which has a identity column (i.e. auto increment column in Oracle) I am getting error saying that can't insert value explicitly when IDENTITY_INSERT is set to OFF.
    Had anybody tried this??
    There are some SRs on this issue, Oracle agreed that it is a bug. I am wondering if there is any workaround from any one of you (refer Insert in MS-SQL database table with IDENTITY COLUMN
    Thanks
    V Kumar

    Even I had raised a SR on this in October 2008. But didn't get any solution for a long time, finally I had removed the identity column from the table. I can't to that now :).
    I am using 10.1.3.3.0 and MS SQL SERVER 2005, They said it is working for MS SQL SERVER TABLE, if the identity column is not a primary key and asked me to refer to note 744735.1.
    I had followed that note, but still it is not working for me.
    But my requirement is it should work for a MS SQL SERVER 2005 table, which has identity column as primary key.
    Thanks
    V Kumar

  • An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider,

    An error has occurred while establishing a connection to the server.  When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider,
    error: 40 - Could not open a connection to SQL Server)

    An error has occurred while establishing a connection to the server.  When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named
    Pipes Provider, error: 40 - Could not open a connection to SQL Server)
    Hello,
    Make sure your SQL Server service is started.
    Make sure TCP\IP and names pipes protocol is enabled
    Make sure you have made an exception in firewall for SQL Server connection
    Make sure SQL Server browser service is enabled
    Make sure you connect with correct name hostname\instance name for named instance,MSSQLSERVER for default instance and Hotname\SQLEXPRESS for express edition.
    Please make sure you use port no when connecting to SQL server listeing on different port (hostname\instance ,portno)
    http://blogs.msdn.com/sql_protocols/archive/2006/09/30/SQL-Server-2005-Remote-Connectivity-Issue-TroubleShooting.aspx
    Hope this helps
    Please mark this reply as the answer or vote as helpful, as appropriate, to make it useful for other readers

  • Where can I find a sql server 2000 driver which supports JDBC 2.0?

    Where can I find a sql server 2000 driver which supports JDBC 2.0?
    Thanks!
    Paul.

    Here is another.
    http://www.datadirect-technologies.com/download/downloadindex.asp
    The JDBC 3.0 driver will work in a JDBC 2.0 environment (i.e with J2SE 1.2 or 1.3)
    provided you use only JDBC 2.0 features of the driver
    "Sree Bodapati" <[email protected]> wrote:
    >
    >
    http://msdn.microsoft.com/downloads/default.asp?URL=/downloads/sample.asp?ur
    l=/msdn-files/027/001/779/msdncompositedoc.xml&FinishURL=%2Fdownloads%2Frele
    ase%2Easp%3FReleaseID%3D38312%26area%3Dsearch%26ordinal%3D1%26redirect%3Dno
    Microsoft.com downloads :)
    http://www.inetsoftware.de/English/Produkte/JDBC_Overview/ms.htm
    www.inetsoftware.de
    are a couple.
    sree
    "pronane" <[email protected]> wrote in message
    news:[email protected]..
    Where can I find a sql server 2000 driver which supports JDBC 2.0?
    Thanks!
    Paul.

  • Installing the New Virtual Machine and XP Mode in Win7x64 on the Intel 2x E5-2620 Architecture (12 cores, 24 cpus)

    I have been hibernating quietly at school with an Intel Core Duo T7300 on XP, and have been insulated from the madness of multi-core processors.  I gather that there were problems with installing the XP Virtual Machine on Vista under Quad architectures,
    but that these eventually got resolved in 2009.
    The newer problem is concerned with installing the XP Virtual Machine on Win7x64 with greater than four cores in the cpu architecture.  Others have mentioned this problem over this past Summer 2012.  The problem is that at the very last step of
    the complete install, Win7x64 reports a failure to install the XP Virtual Machine, and with no further comment.
    Apparently KB/2519949 gave a temporary (MSFT qualifies this as "temporary") hotfix solution to this problem for AMD 8-core chips in the Bulldozer series.  However MSFT cautions that this problem requires further research.  This was earlier
    this Summer 2012.
    My problem is that I have an Intel 2xE5-2620 duo-processor cpu architecture (2x6=12 cores, 24 cpus in Windows).  The cpu architecture is both Intel, and with far more than the old standard of four cores.  The XP Virtual Machine in Win7x64 will
    not install, as described above.
    I have an armload of new 64-bit software all of which has installed pristinely in Win7x64 under this 2xE5-2620 Intel architecture.  However, I have one very important piece of legacy (latest version incompatible beyond XP type of legacy) technical writing
    software that is critical to my PhD thesis.  In need the XP Virtual Machine for this, and I have no idea how to get it.  My PhD thesis supervisor also needs this particular piece of "legacy" technical writing software for his new book on Probability
    Theory.
    1011::1000

    I have news about this issue with XP Mode on Workstation machines.  I have actually known about this for a couple of months, but it has not been until these Christmas 2012 holidays that I have had a chance to follow up with an implementation. 
    In review, I purchased a Workstation computer for scientific computation purposes this past August 2012.  My chipset is an Intel 2x E5-2620 for a total of 12 cores, and it turns out that this was not the problem for XP Mode.  My OEM shipped this
    machine with Windows 7, but without XP Mode, and there is a reason why.
    As an aside, it should be mentioned that the main line MSFT OS, Windows 7 or 8, is what I want for this machine, and not Server 2012.  The reason is that most of the scientific computation and technical writing software that I use is written only for
    Windows, and not for Server.  Then also hopefully Hyper-V can do in Windows 8 most of what XP Mode is doing for me in Windows 7.
    My dealer was able to tell me, when he got back from holidays in late September, that the reason that XP Mode failed to install on this Workstation, and the reason it was not included by the OEM, was that the original HDD configuration was for RAID (3 available
    bays) and formatted for drives of at least 1TB in size.  Although the original HDD installation was only a single HDD with only 500GB, the machine was equipped to have something much larger installed.  But this format excluded the possibility of
    XP Mode.
    So we changed the hard drive installation to something that I preferred.  We installed Windows 7 on a 480GB SSD, and I installed all my software on this drive, as well as all my important data.  Most importantly, since this drive is less than 1TB,
    we could use the MBR format which allows XP mode.  Then we also formatted the original HDD of 500GB in MBR, and decided to run it with Intel RST.  This second drive is for unimportant data, and large files.  For backup we chose a 2TB USB 3.0
    external.  In this setting, installing Windows XP Mode was easy, as the only thing we needed to do was modify BIOS to enable virtualization which was part of the Intel 2x E5-2620 chipset already.
    I am very pleased with XP Mode. The scientific writing software for my thesis that I was worried about does actually run in Windows 7 under compatibility mode, but there have been some huge advantages to installing in in XP Mode as well. I still have licensed
    copies of Office 2003, Acrobat Pro 9, and MathType 5.2, and other old software as well. I now have all new software, for example Office 2010 (64-bit), Acrobat Pro 10 (32-bit for 64-bit), and MathType 6.8 (64-bit), and lots of other things. However, now that
    I have my scientific wrtiting software (for which the maker has not caught up with Windows Vista/7) installed in XP Mode, I have also installed WORD 2003 with MathType 5.2 in XP Mode. My scientific writing software can translate WORD 2003/MathType 5.2 in RTF
    format to LaTeX. So lets hope these guys eventually catch up with Windows 7 and 8.
    I am also using XP Mode to archive a large block of my old data from the XP days. I still have licensed copies of the out of date software. And I would rather not update every single old file I have to a current format. So altogether, XP Mode is working
    out quite well.  It is very fast with my Intel 2x E5-2620 and maximum RAM.
    1011::1000
    1011::1000

  • Can Creative Cloud be installed on a virtual machine?

    Can Creative Cloud be installed on a virtual machine? 

    What do you mean?
    Some people with a Mac prefer to use the Windows version of Adobe software, so they install a Windows emulator on their Mac to then run Windows software
    If you are asking about installing on a network server... the answer is NO... the programs are made to install on individual computers

  • Mirroring Arch install to a virtual machine

    Hi.
    I have a workstation setup based on arch that I am very happy with so far. What I would love is to have the same setup available when Im not at my workstation. The solution I want to explore is to install a virtual machine running arch on my mac and then, using rsync or whatever, keep the system installed in the virtual machine in sync with my workstation. Like if, for instance, I install a package on my workstation it should be synced to the virtual machine. It doesn't seem to me like this would be too hard to get setup, but I'm not sure how much of the system can just be copied considering the difference in hardware settings.
    Has anybody got a setup like this up and running? And/or any suggestions as to what would be the best way to achieve it?
    Thanks
    Peder

    What you want to do works with snow leapard server,    I think the bastards crippled snow leapard client.
    for a work around I am forced to use a usb network adapter and dedicate it to the nic.. this is not optimal.
    Have you found a solution yet ?  I was going to try netorking kernel extensions from the hackintosh guys.

  • HT1329 I wish to transfer all the music on my ipod (synced with my home computer) to my itunes on my work computer. Is this possible? I am concerned if I plug my ipod into the work computer, which has itunes but no music content, that it will automaticall

    I wish to transfer all the music on my ipod (synced with my home computer) to my itunes on my work computer. Is this possible? I am concerned if I plug my ipod into the work computer, which has itunes but no music content, that it will automatically sync and wipe all the content from ipod. Can anyone advise?

    Only if you use a third-party utility such as Phone to PC and only if you use the same Apple ID for your other computer.

  • Microphone is not working on Windows 10 Tech Prev installed on a Virtual Machine

    Microphone is not working on Windows 10 Tech Prev installed on a Virtual Machine.
    What are the recommended troubleshooting procedure?
    Thanks,
    sistec

    Hi,
    Audio redirection might not be configured correctly for the virtual machine, I recommend you refer to the audio\sound\usb redirection guide for the type of your virtual machine.
    Hyper-V virtual machine
    http://blogs.windows.com/bloggingwindows/2013/12/05/overview-client-hyper-v-enhanced-session-mode-in-windows-8-1/
    Windows Virtual PC
    https://technet.microsoft.com/en-in/library/ee449432(v=ws.10).aspx
    If the settings are set correctly, then please check the driver for the
    Microphone, update the driver, it also might be a driver compatibility issue with Windows Technical Preview.
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

  • Known Issue: Windows Emulators Are Not Supported When Visual Studio Installed in a Virtual Machine (Windows 10 Insider Preview SDK and tools, April 2015 release)

    If you install Visual Studio 2015 with the Windows 10 Mobile emulators in a virtual machine, setup will succeed but the emulators will not be available as valid debug targets.

    The Windows Emulators require a physical machine that runs Windows 8.1 (x64) Professional edition or higher, and a processor that supports Client Hyper-V and Second Level Address Translation (SLAT). The emulators will not run when Visual Studio is installed
    in a Virtual Machine (VM).
    The emulators for Universal Windows app development work best with Windows 10.

  • Installing OBIEE on virtual machine

    hi..
    i am new to obiee and want to install obiee on virtual machine. ...
    please can anyone let me know if there is any link or document which i can use to install obiee on virtual machine where various users can connect connect and use it for some tutorials and training purpose..
    many thanks
    cheers..

    http://download.oracle.com/docs/cd/E10415_01/doc/nav/portal_booklist.htm
    http://obiee101.blogspot.com/2009/07/obiee-how-to-get-started.html
    http://www.oraclenerd.com/2009/01/learning-oracle-business-intelligence.html

  • "Installing extensions on virtual machine..." does not complete on Azure VM

    When creating VM using my custom disk, I encountered the same issue as the one mentioned in this post(http://blogs.msdn.com/b/mast/archive/2014/06/18/azure-vm-provisioning-stuck-on-quot-installing-extensions-on-virtual-machine-quot.aspx). I can’t
    resolve my problem by following the steps of the post. 
    Here is the context:
    Before uploading the disk, I prepare my Ubuntu VM by following this post(http://azure.microsoft.com/en-us/documentation/articles/virtual-machines-linux-create-upload-vhd-ubuntu/) in which there is a step “sudo apt-get install walinuxagent”.
    When creating VM, the portal is stuck in "Installing extensions on virtual machine...”.
    I can’t SSH to the VM.
    I checked the status of VM agent using PowerShell, it shows ‘GuestAgentVersion: Unknown’ and ‘Status: NotReady’.
    Could you kindly help me out?

    Hi Hulu;
    Thank you for your post. Apologies for the late response. From a support perspective the way forward would be to open up a support ticket as we would need to do get the
    need subscription id, deploymend id and vm name for further troubleshooting I encourage you to do the same.
    Please refer to
    this documentation on how to open a support ticket. Hope this helps.
    Warm Regards;
    Prasant

  • How to pass values to SQL server Agent Job which internally calls SSIS

    Hi,
    I have a requirement where i need to call remotely SSIS package from ASPX. After following MSDN form, I have creaed one SQL server agent job and calling that job from ASPX. I am ablt call SQL server agent job from ASPX. Only issue i am facing is: I need
    to pass 2 variables from ASPX to SQL Agent job so that from Job i can map the same to SSIS Package.
    I am using system SP (sp_start_job) for calling SQL server agent job as mentioned in MSDN forum.
    below is the code , which i am using to call SQL serve agent job.
    Code:
    SqlConnection
    jobConnection;
    SqlCommand jobCommand;
    SqlParameter jobReturnValue;
    SqlParameter jobParameter;
    int jobResult;
                    jobConnection =
    new
    SqlConnection("Server=ServerName;Initial
    Catalog=msdb;Integrated Security=SSPI;user id=username;Password=password");
                    jobCommand =
    new
    SqlCommand("sp_start_job",
    jobConnection);
                    jobCommand.CommandType =
    CommandType.StoredProcedure;
                    jobReturnValue =
    new
    SqlParameter("@RETURN_VALUE",
    SqlDbType.Int);
                    jobReturnValue.Direction =
    ParameterDirection.ReturnValue;
                    jobCommand.Parameters.Add(jobReturnValue);
                    jobParameter =
    new
    SqlParameter("@job_name",
    SqlDbType.VarChar);
                    jobParameter.Direction =
    ParameterDirection.Input;
                    jobCommand.Parameters.Add(jobParameter);
                    jobParameter.Value =
    "ImportCMTData";
                    jobConnection.Open();
                    jobCommand.ExecuteNonQuery();
                    jobResult = (
    Int32)jobCommand.Parameters["@RETURN_VALUE"].Value;
                    jobConnection.Close();
    switch (jobResult)
    case 0:
    Console.WriteLine("SQL
    Server Agent job, RunSISSPackage, started successfully.");
    break;
    default:
    Console.WriteLine("SQL
    Server Agent job, RunSISSPackage, failed to start.");
    break;
    Console.Read();
    Thanks
    Pankaj

    "3-4 concurrent users are calling the SSIS package from ASPX page" this is not a proper design
    If the data is being ingested than it is likely that this concurrency will lead to one of the packages die
    What you shell do is to just queue the data ingress/processing.
    In general, again, packages should not be called from ASP web pages, SSIS is ETL-server side technology there is nothing signalling back to the user whether it was successful. The proper way is to write a REST service or alike. 
    Arthur
    MyBlog
    Twitter

Maybe you are looking for