Is it possible to load One Track at a time to ipad??

Is it possible? -- It seems to only want to load EVERYTHING in my itunes. Somewhere it says something about chekcing things.... but they are all checked alreadt and when I uncheck they dissappear... ?? Very important, thanks.

You can, see the 'syncing manually' section on this page : http://support.apple.com/kb/HT1351

Similar Messages

Hey, is it possible to load my Tracks, made by Logic Pro 8, to Logic Pro X ??? Thanks for help

Hey,
is it possible to load my tracks, made by Logic pro 8, to Logic pro X.
Thanks for your help.

Yes, it is possible!
Regards

How can I print out a musical score? Not just one track at a time.

Hello, I am a composer and I would like to print out a piece that will have piano, voice, and possibly other instruments on it. So far I can only seem to print one track at a time rather than the whole piece. I would REALLY appreciate any help!
Thanks!
-Kim

No problem. Finale's full software package is pretty expensive, but they offer a scaled-down $10 version called NotePad which will import MIDI files and print scores. I'd suggest starting with that and seeing if it is sufficient:
http://www.finalemusic.com/NotePad/default.aspx

Is there anyway to record more than one track at a time on garageband for ipad?

Just wondering if that is possible or in the works?

GarageBand for iPad only allows to record on one track at a time. That is the selcted one that turns into the Instrument View where the actual recording is done.
If multi-track recording is in the works, nobody know except Apple and they won't usually pre-announce that kind a things. My guess, it will not be implemented.
Hope that helps
Edgar Rothermich
http://DingDingMusic.com/Manuals/ 'I may receive some form of compensation, financial or otherwise, from my recommendation or link.'

OBIEE Pre-Builts Loading one year at a time

Hi,
We are in a situation where we need to load one year at a time into the BAW (warehouse). I have seen this done before where the initial load was a full load and only went forward one year. Each subsequent load was for a complete year until we were current. After that, it was simply incremental loads with the standard prune days of 30.
Does anyone have any detail as to how to do this?
Regards

Is the issue a performance issue (ETLs running for too long)? The problem is that if you do Year by year..and you want to do a "incremental" load for each year, that would be even more of a load..since you are not allowing for BULK load (where the tables get truncated). Either you can truncate and do BULK or incrmental..which may be an even heavier load. I think you are assuming that this approach will somehow help you from a hardware limitation standpoint..do you know for sure that it will?
If you really do want to do it, as I mentioned, you can edit the INITIAL and END parameters. It would help if you clarify the Hardware limitation...I think there are better ways to handle this than to do what you are doing.

More than one track at a time

I have an Allen and Heath zed 12 mixer connected by usb to my mac. can I record more that one track at a time using Garage band?

it looks like that is a stereo console which means you could record up to two mono tracks at a time:
see if it offers more:
http://www.bulletsandbones.com/GB/Tutorials.html#bsqrecordmultipletracks

How can I view the complete score with all tracks? I seem to only be able to view one track at a time. Thanks

How can I view the complete score with all tracks? I seem to only be able to view one track at a time. Thanks

JoBrooke wrote:
I seem to only be able to view one track at a time.
unfortunately, that is how GB works, it only offers a score for a single track at a time

How do you enable more than one track at a time?

Couldn't find it in the help portion of the program. I am beginning to believe I have an incomplete help document. Anyway, I want to record more than one track at a time, for example vocals and guitar, while being able to monitor them. Thanks. btw why is this forum so slow? It like totally runs fine till I sign in to my user account. Then it's as slow as a cyber snail.

Okay, I will try that. I have one last question pertaining to this. Will this work if I am using a condenser mic on phantom power through a midi device while plugging the guitar through the same midi-device? I will try a few things either way but I thought I might ask before hand.

How to RECORD more than ONE TRACK at a time ? ? ?

I have looked, read and tried - but cannot enable more than one track at a time... How do you do it?
I am using a Lexicon Omega USB interface. With two mics plugged in to it, I am able to assign MIC 1 to a track, and MIC 2 onto a different track. However, cannot get BOTH tracks to go "live" at the same time.
Thanx: Stacey

"basic track" is a short cut. whenever i explain something to someone recording an audio instrument i always tell them to create s New Basic Track. it's simple, to the point, has no effects on it (and you can add those later, anyway, the BEST way to do it)
however, either would not cause the issues you're dealing with at the moment, both are valid. Basic just skips a step.

Error received when trying to import/only one track at a time...

When I go to import my cd into iTunes it is only letting me import one track at a time. Also occasionally I getting this error when I try to import a track. "The file 'xxxxx.cda' cannot be imported because it does not appear to be a valid exported file." What's with this? Any help/suggestions?
Thanks
Avonlea

Hi there
If you really intend for us to see an image, please insert it. This is described at the link below:
Click here
Cheers... Rick
Helpful and Handy Links
Captivate Wish Form/Bug Reporting Form
Adobe Certified Captivate Training
SorcerStone Blog
Captivate eBooks

Whenever I go to a site or click anything, I always have to move my mouse for the page to load, why is this happening? (When I go to a site full of images, I move my mouse a little bit at a time and it loads one image at a time)

Whenever I go to a site or click anything, I always have to move my mouse for the page to load, why is this happening? (When I go to a site full of images, I move my mouse a little bit at a time and it loads one image at a time)

Hi, Tom.
FYI: You've not stated which of your listed Macs is having the problem. However, the following may help in any case:
1. Did you install Front Row using the Front Row hack on a Mac that did not ship from the factory with Front Row installed? If so, See my "Uninstalling the Front Row hack" FAQ. This has been known to cause a variety of problems, including the menu bar (Clock, Spotlight) issues you noted.
2. If you did not install the Front Row Hack, an incompatible or corrupted Startup or Login Item may be partly to blame for the problems with the menu bar. My "Troubleshooting Startup and Login Items" FAQ can help you pin that down if such an item is causing the problem.
3. As a general check, run the procedure specified in my "Resolving Disk, Permission, and Cache Corruption" FAQ. Perform the steps therein in the order specified.
4. Re: Safari and Mail, if not sorted by any of the above, see also:• "Safari: Blank icon after installing Security Update 2006-002 v1.0."
• My my "Multiple applications quit unexpectedly or fail to launch" FAQ
Good luck!
Dr. Smoke
Author: Troubleshooting Mac® OS X

Recording more than one track at a time...

Ok, so heres my problem.
This is going to be my future setup...
for recording drums of course.
so I'm going to have around 6 microphones. A mixer, and i already have an interface. And of course i use soundtrack pro.
so if the microphones are all plugged into the mixer, and the mixer into the interface and the interface into the computer... wouldn't all the 6 microphones be one track on soundtrack pro? i mean... you can only do so much editing on a mixer. It would be very nice if i could edit every single mic separately.
so in conclusion...
i want to record 6 tracks all at the same time with every single track a different microphone.
if that is not possible, could somebody maybe tell me how i could do something relatively close to that.
thank you.

You have to set each track to a unique channel. Open track info and select Channel 1 for one of the tracks, and Channel 2 for the other.

Moving more than one track at a time in track list

I have lots of tracks in my track list. How do I move them all down so I can create empty space for new tracks up on top, below the Global track? It seems I can only grab and move one at a time, which is not only incredibly inefficient, it messes up the order of the tracks.
Seems there should be a way to select all the tracks at once, such as by using the shift key, then dragging the bunch of them. But alas... I can't seem to select more than one at a time.
Any ideas?
Thanks.

Hi winky333,
It is not possible to do this in Logic. I guess they do this based on mixing etiquette where the tracks are sorted by the channels or outputs. You can create a template that has the tracks you want where you want them as a starting point. When you add a new track it always adds them under the currently selected track. So if you want a new one in a specific location is easiest to select the track above it. It is possible to sort the tracks as well. In the local menu in the Arrange window click the Track menu and then choose Sort Tracks By which has multiple options such as MIDI Channel, Audio Channel, Name, etc. I think this is a feature that should be added myself. You can always go to the Help menu in Logic and choose Provide Logic Pro Feedback and submit your feature requests/feedback there.
Cheers

Instrument track only plays one track at a time

Logic Studio will only play one instrument track at a time. Whenever I click to another instrument track I lose the sound. The channel strip meter still shows that the instrument is playing but there is no sound. When I click back on that channel strip I can hear the sound again. Although the channel strip meter works, the strip in the mixer doesn't show any signal at all. It seems that the track is working but there doesn't seem to be any output to the mixer. I have checked all of the solo buttons and none are on. I opened a blank project and all of the software instruments worked just fine; it is only in this project that I can't get more than one instrument track to play at a time.

still plays only one instrument track at a time
I think this project might be damaged, and it would be great if we could take a look at it, as Bee Jay suggested. In the meantime, you should try what Erik suggested about option-click. And here are a few other ideas, although I'm not too optimistic.
Select any region and press S. Three things should happen: this region should have a yellow outline, the ruler should turn yellow, and the solo button in the transport bar should turn yellow. Press S again, and those three things should revert to normal. Is this what happens? It just might be helpful to know.
In the Mixer window, find the button at the top that says "All," and select it. Make sure to look at every channel strip. No yellow S button anywhere? Do you see any Mute buttons flashing?
Press option-K to open the key commands window. In the search box, type "solo off" (without the quote marks). You will see the command 'Solo off for all.' Probably no key is assigned. Give it a key (option-1 might be a good choice, because it's probably available). Close the key commands window, and press the key stroke. Better now?
The channel strip meter still shows that the instrument is playing but there is no sound. When I click back on that channel strip I can hear the sound again. Although the channel strip meter works, the strip in the mixer doesn't show any signal at all.
I have a feeling that when you say "channel strip meter" you mean 'track header meter.' Because it's completely normal that when a midi track is muted (e.g., because another track is soloed) that the track header meter will keep lighting up, even though there's no sound and even though the meter in the mixer (on what is properly called the channel strip) is dark.
The meter in the track header is just indicating that Logic is reading midi from the track. Whether or not that midi gets to become sound is something that happens downstream, and is not reflected in this meter.

CAN I ENLARGE THE SIZE OF ALL TRACKS AND NOT JUST THE ONE TRACK AT A TIME

I would like to enlarge the tracks on the top half of the mix screen and not just the one track I'm working on. I find that most times I'm working in 2 or 3 tracks only and it would be great if I could enlarge the size of those to work with rather than the thin tracks they appear as. I realize if I click on one that it will appear larger below to edit but can I have all the tracks recorded appear larger?
[email protected]
Ross

NO

Is it possible to load One Track at a time to ipad??

Similar Messages

Maybe you are looking for