Is it possible to maintain two class type for a material

Dear All,
Is it possible to maintain two different class type for a material.
If a material assigned with the batch and the material is a part of variant configuration, then how to handle this scenario.
For Batch Management, class type will be 023, for Variant Configuration class type will be 200.
How to handle this scenario.
Please explain.
Regards,
Mullairaja
Edited by: MullaiRaja on Jan 5, 2011 5:19 AM

Mr.Raja
As far as my knowledge, it does NOT make sense to assign a material to more than one class type.
We can assign many classes to  a single class type of  a material.
For configurable material, create the material using material type : KMAT.
& then, activate the 'batch management" control in the material master, for that material.
Pls revert with feedback.
Hope, that helps you.
Rgds
Sumanth.Gururaj
Consultant/Systems Analyst - SAP SD/MM

Similar Messages

  • More than one class type for a Material

    Hi All,
    We have a requirement of using a Material for Variant configuration. So we need to assign Class type 300 for that Material.
    But that Material is Batch managed. So Class type 023 is already assigned. I am unable to extend the Material to Class type 300.
    I searched forum, it is given that, it is possible to maintain different Class types for a Material.
    But I tried, I couldn't do that.
    Please help me to extend a Material to another Class type.
    Regards,
    Raja Durai

    Hi Raja,
    You can maintain different classes for same material.
    Go to material master and go to Classification view. Go to Extras->Change class type (F7)
    Now you can add a class of different class type.
    Please see below snapshots for more details.
    Thanks,
    Dattatreya N R

  • How to Maintain two different prices for same material in different qty?

    Dear all,
    How to maintain two different prices for same material in different batch quantities in purchase order(ie.,info record)?
    (Vendor is supplying quantities in 2 different batches & also in different prices)
    Expecting valuable reply.
    Jeyakanthan

    In a PO you can create 2 items, and each item can be maintained with a different price in the conditions.
    In info record it is not possible to have different prices for the same period, except for scales.
    so if you have a price of e.g. 2 USD for 1000 kg and 1,90 USD for 2000 kg then you can maintain this in scales, but you still have to have 2 items in the PO so that each one can individually find its price.
    Alternative you can create contracts (as well with more than one item) to reflect the different prices and batches.

  • Need  to find the class type for a material

    Hi all,
    i need to find the class type for the material.
    is there any FM or the table where i have both MATNR and KLART fileds.
    Kindly reply asap.
    Thanks
    Sri

    Hi,
    There can be multiple class types assigned to a material. You can view this in the classification tab in the material master transaction.
    You can pass the MATNR to OBJEK field of KSSK table after using neccessary converison Exit to get KLART(Class Type). It will return you a 3 digit Class type. You can find the description of the class from the class type master table TCLA.
    Hope this helps.
    Edited by: Priyabrata Samanta on Feb 11, 2008 11:43 PM

  • Custom class type for Plant material

    Is there any way to create a custom class type for plant and material? Any other way to use standard functionality to use classification in material master for specific plan will also work.
    thanks,

    Hi Rahul,
    The Classification data in material master can only be maintianed at Client level and not at plant level.
    The standard Class type 001 can be used to create your own classes. Create a class for each applicable plant. Add the applicable characterstics under every class. That way you will be able to maintain plant spceific details when you are adding Objects for the material master.
    Regards,
    kathir

  • Two order Types for a Material

    Dear Friends
    For a material X, I have two BOMs with usage 1 & usage9 . When I make order with zlo1, the BOM with usage 1 is loaded in production order. When I create a production order with order type zro1, the BOM with usage 9 is loaded in production order.
    But both the production order types come in MD04 screen.
    But I want production order with zlo1 will appear to some ids and order with order type zr01 will come to some other ids. Is that possible??
    Thanks
    sangeeta

    Hello,
              You have to check the order type dependent parameters, production scheduler, production scheduling profile and in the material master work scheduling view which production sheduling profile you have used. The base concept of your query is order types picks mainly from the work scheduling view, according to the prod scheduler and profile, the same will be defined in the transaction OPKP there you will assign this and you have to check at the ultimate down side which order types you have permitted for this profile, kindly check at the bottom most what are the order types you have assigned.
    Hope if you verify all these your problem will be solved.If you still have any queries Please revert back.

  • Multiple class types for material master classification display default.

    Hello,
    We are running on R/3 4.7.  We use several different class types for our material masters (001 and Z01).  The problem this creates is the end user having to constantly tell the system which class type to use when going to the classification screen for different materials with different class types.  If a user views one material's classification page with a particular class type (001) then looks at another material with a different class type (Z01) the system tries to pull in information from the last materials class type (001).  The system tells the user there are no assignments for the class (001) in the material their viewing but there is one for class type (Z01).  The user then has to select the class type that applies to the material master their trying to view.  Is there a way for the system to automatically see when a material has only one class type assigned to it for it to automatically default it in without the user having to specify the class type?
    Thanks,
    JRW

    Hi,
    Check the configuration, have you maintained default class type for material type.
    Logistic General> Material Master> Basic Setting> Material Type> Define attributes of Material Types>Select the material type> Double click on material type--> Class type
    Edited by: P. Dhamane on Jun 4, 2010 3:21 PM

  • Multiple Class Type for Material Master

    Hello Everyone,
    I would like to ask where in configuration can I setup Classification so that for each Material Master it can have Multiple Class Type. (such as 001 - Material Class, 023 - Batch, 300 - Variants).  Because currently I can only see 023 - Batch whenever I create a new Material Master.
    Thanks.

    Hi,
    Check the configuration, have you maintained default class type for material type.
    Logistic General> Material Master> Basic Setting> Material Type> Define attributes of Material Types>Select the material type> Double click on material type--> Class type
    Edited by: P. Dhamane on Jun 4, 2010 3:21 PM

  • Maintain two excemption certificate for a vendor

    Hi,
    How to maintain two excemption certificate for a vendor.
    I have a vendor, submitted lower TDS deduction certificate on april and again submitted another certificate in june with difference rate of TDS.
    how to configure.
    Regards
    Venkat

    One exemption per tax type-tax code combination can be maintained in the Vendor master.  So if your taxes are of different combinations, then it is possible.
    However, as per act, two exemptions are not available under the same section (For eg. you cant have two exemptions under section 196A).  But it is possible to have two certificates under different sections.  But even in this case, there are restrictions because at the end it is the income of the same Vendor.
    So, to answer your question, technically it is possible to have two exemptions, but as per law you are not permitted, unless the act specifically permits such a provision under some notification.
    Ravi.

  • Is it possible to run TWO parellel configurations for one Object??

    SAP Gurus,
    We have a strange requirement from the client to have to configurations established in the system for one configuration object.
    Without taking much of your time let me paraphrase the requirements.
    The client is having two different types of putaway strategies in their current business process. And they toggle between these putaway strategies by reaching out to their production support group and they make configuration changes to have the other put away strategy
    One Step Putaway: GR area --> High Rack Storage
    Two Step Putaway: GR area --> Interim storage (area at the end of each aisle of high rack storage) --> High Rack
    Client wants to have two parallel configurations for both of these put away strategies and needs an ability to switch from one to another. This switching ability should be accessed from SAP screen without any IT intervention (no configuration)
    -  Switching ability should allow the warehouse manager to change from one step to two step put away strategies without any IT intervention.
    -  Switching ability should be accessed my SAP Screen (Z-transaction or something with a radio button to toggle around)
    Is it possible to have two configuration made for Putaway Strategies and switch them on/off depending on the warehouse needs??
    Your invaluable feedback on this will be highly appreciated.
    Thanks again folks,
    Dhaval
    Edited by: Dhaval Joshi on Mar 4, 2008 12:09 PM

    Q1--I don't believe it is possible. An organization can have multiple licenses tied to its main email address, for example, but then they are assigned to the individual users.
    Q2--Yes, you would just need to log out of your account within the CC desktop app prior to logging in on the other account.
    If you have any questions, feel free to reach out.

  • Not possible to determine a condition type for the price in ME49

    Hi,
    While saving the price in ME49 i.e. comparision of Quotation i am getting below error:
    Not possible to determine a condition type for the price
    Message no. 06657
    Diagnosis
    When it attempted to generate the time-dependent conditions for the price you entered, the system was unable to determine a condition type. Price determination is therefore not possible.
    Procedure
    Contact your system administrator.
    The latter can maintain the calculation schema assigned to the purchasing document using the Implementation Guide (IMG).
    Utsav

    Hi Utsav,
    You can refer to the following link. it might be useful to you
    RFQ price
    Thanks
    Nisha

  • How to maintain two credit limits for the same customer.

    We have two lines of business for the same company code. One customer is trading in two lines of business.
    We want to maintain two credit limits for same customer. How is this possible.

    Hi,
    Credit Limits are assigned to customer master in a credit control area, so a customer can have different credit limits for the different credit control areas.
    (Please note that Credit Control Areas are normally assigned to company codes or sales area.)
    But if you are having only one credit control area, then only one credit limit can apply.
    However you can use the user exits to put any check you want for the customer. There are various user exits available for it like LVKMPTZZ,LVKMPFZ1,LVKMPFZ2 and LVKMPFZ3 in transaction SMOD
    Regards,
    Gaurav

  • Is it possible to have two USB drives for the IPad?  I want to bring RAW photo files from my camera, through the IPad and back to an external hard drive.  One of my cameras does not use an SD card.  How can I do this?

    Is it possible to have two USB drives for the IPad?  I want to bring RAW files from my camera through the IPad and out to an external hard drive.  One of my cameras has an SD card but the other one doesn't have a card that would fit in any of the camera devices I've seen on line.  Realted to this, I bought the IPad camera accessory.  Can I put the SD card in the device and also hook the external hard drive to the USB port of the accessory and download from the camera to the hard drive?  Can I put Lightroom or the Nikon photo editing software on the IPad?  Right now I carry a PC laptop and external hard drives with me on wildernes trips.  Internet and WiFi are not available.  Because I shoot so many photos and they're in RAW I need to download from the camera to the external drive because I run out of memory on the PC (and it has much more memory than the IPad).  I have Nikon NX software and lightroom on my PC.  I'd love to be able to reduce the weight I carry by using the IPad to edit my photos each night while on trips.  Is this possible and how would I do it?  I'd appreciate any guidance.

    No, the camera connection kit only supports the copying of photos and videos to the Photos app, it doesn't support copying content off the iPad. For your second camera instead of the SD reader part of the kit, does the iPad to camera cable not work with it for direct transfer to the iPad ?
    For Lightroom and Nikon software again no - you can only install apps that are available in the iTunes app store on your computer and the App Store app on the iPad, 'normal' PC and Mac (OS X) software are not compatible with the iPad (iOS). There are some apps that perform fairly basic editing functions that are available in the store, but nothing as sophisticated as, for example, Lightroom.

  • Maintain Partner Bank Type for customer

    Hi,
    I have a problem when running the payment proposal via F110.
    I want to procede to a customer/vendor clearing, the problem is that the partner bank type is filled for the vendor but not for the customer.
    If i want to maintain "partner bank type" for the customer, where should I maintain it?
    Could you please advise me?
    Thanks in advance,
    Soumaya

    Hi,
    If your client does not want to use this field because the bank details are set for deletion then, refer to OSS Note no.:1016924. Otherwise, please try Substitution in OB28 with the User Exit ZGGBR000 (Copy of RGGBR000).
    Regards,
    Kiron Kumar T.

  • How is ist possible to maintain the time dependencies for Abap Privileges?

    How is ist possible to maintain the time dependencies for Abap Privileges?
    In our Installation of SAP IDM 7.0 SP2 Patch 4 the time dependencies of Abap Roles are imported in the IC by Initial loads Jobs. How can the see / change the dependencies in our IDM Workflow UI? Presently nothing jet is shown, no Attribute is predefined..
    Can anybody give us a hint?
    Thank you in advance !!

    If you click VIEW/SHOW PLAYHEAD INFO, you will see the timecodes as you scrub. (Consumer timecodes, not pro timecodes).
    This works if you imported your footage from a camcorder, either miniDV or AVCHD.
    However, if you have imported an analog file, or saved a DV file to a QuickTime File, you may just see the file creation date in VIEW PLAYHEAD.
    However, there is a trick to getting even these clips to display timecodes if you know the start time.
    First pick a clip. Make a copy and drag it to your desktop, just so you don't lose anything.
    Rename this copy in the following format clip-yyyy-mm-dd hh;mm;ss.current file extension.
    For example, clip-2001-07-14 09;30;45.mov (note the space between the day and the hour)
    This would be a .mov clip that starts with the first frame at July 14, 2001 at 9:30:45 AM
    Then import the clip into iMovie. You now have timecodes at the playhead.

Maybe you are looking for

  • I have the latest photoshop cc 2014, but i dont see perspective warp in it, does anyone have an idea why

    I have the latest photoshop cc 2014, but i dont see perspective warp in it, does anyone have an idea why

  • Enter the value of IN parameter of a function at the time of execution

    Hi, I have written a query and created a .sql file. So whenever I use to perform one action, I'll just run the .sql file from my unix box. But in one of the functions of my query, the IN parameter has to be supplied every time coz it changes from tim

  • Album Starter Edition 3.2

    I used to have pictures stored in the MY CATALOG section of the Photoshop Album. Recently my Dell Dimension 3000 (Windows XP Homne edition) was acting up awfully and I had a clean reinstall done from the installation disc. Unfortunately, my Photoshop

  • Equivalent fields of Enterprise Service in SAP

    Hi , I have a requirement to get static and dynamic heirarchy of an employee in OM. I could not find any Enterprise Service which fulfills my requirement. I got some ESs which are partially helpful but i need to relate the ES fields to SAP fields. Pl

  • ICal defaults to all-day

    Migrated to Mountain Lion and now I find that iCal always defaults to All-Day for new events. I've seen discussions here about using the Cmd-N keys to start a new event which you can then modify, but is there not a setting we can change in Terminal t