Is it possible to re install opentransport onto mavericks?

After installing Mavericks, my Digital Audio Workstation is now unable to use re-wire capabilities because Mavericks removed opentransport.
I did not back up my computer unfortunately, so backing up to the old operating system isnt really an option at the moment. Is it possible to re-install opentransport? PLEASE HELP!

The physical DVD required no serial number. If you have lost that yes you will need to buy the M.A.S version with the consolation that it is cheap here and can be installed on all your Macs at no extra charge.
If you have a serial number it is possible you bought the downloadable version, in which case use that to install and use the serial number when prompted.
Peter

Similar Messages

I want to install Yosemite onto an external hard drive, and keep Snow Leopard installed on the internal hard drive. I want to be able to boot from either system, depending upon circumstance (at least until Yosemite is stable). Is this possible?

iMac, Model Identifier iMac12,1 with 121.5" screen, 2.8 GHz Intel Core i7 processor, 8 GB 1333 MHz DDR3 memory, 1 TB internal hard drive, running Snow Leopard 10.6.8 from internal drive.
I want to install Yosemite onto a 1 TB external hard drive (OWC) , and keep Snow Leopard installed on the internal hard drive. I want to be able to boot from either system, depending upon circumstance (at least until Yosemite is stable). Is this possible?

It is possible. I'll let you read some articles that cover the setup:
Starting from an external USB storage device (Intel-based Macs) - Apple Support
or
http://osxdaily.com/2013/06/22/boot-mac-external-drive/

If I purchase Adobe Standard, how many computers can I install it onto? And is there any way of buy an additional subscription? i.e. if it can only be installed onto two, is it possible to purchase a third installation?

The company I work for are looking to purchase Adobe Standard, how many computers can this be installed onto? We need it on three computers so if it is only possible to install it onto two is it possible to install it onto a third computer without having to buy the software twice?
Thanks

Hi There,
We would like to inform you that you can just activate 2 machines with one subscription, however, you can just use one at a time.
If you wish to use the 3 machine, then, you would have to purchase another subscription with a different email address.
You would need another email address, because the activation is done via email address and more than two activation on 1 email is not possible.
Please revert if you need any more information on this.
Thanks,
Atul Saini

I was going to install Rosetta Stone Spanish onto my Macbook but am concerned about it taking up space on my 2GB hard-drive. I have an external WD hard-drive; is it possible to put the application onto the external hard-drive to save space on my mac?

I was going to install Rosetta Stone Spanish onto my Macbook 10.6.7 but am concerned about it taking up space on my 2GB hard-drive. I have an external WD hard-drive, and I was wondering if it is possible to put the application onto the external hard-drive to save space on my Mac?

I think you're confused about how much hard drive space you have. You probably have 2 GB of RAM... there hasn't been a Mac shipped with only a 2 GB hard drive in a while. At the bottom of any Finder window, how much space is available?
If you're actually running low on space, you should move documents to the external drive, since many applications want to be on the system drive.

Is it possible to install Tiger onto my old iMac G3 ?

I would like to install Tiger onto my old iMac G3 and give it to my grandson. The iMac is presently running Mac OS 9.1 and has 320 mgs RAM and 6 GIG hard drive. The processor speed is 350 MHz. Is this possible ?
Can I use the Tiger OS disks that came with my new G5 or do I have to buy another Mac OS Tiger specifically for iMacs ?
I don't mind buying some more RAM if the above is possible - it is a lovely little machine and runs perfectly right now - I hate just dumping it! Grateful for any help, thanks, Diana.
iMac G3 Mac OS 9.1.x

I don't know if Apple supports the G3 iMacs for Tiger. You may have to use Xpostfacto in order to install it on it. From what I've heard, performance on a 350MHz G3 with Tiger should be adequate. You might have to update your iMac's firmware before installing it, though.
Upgrading the hard drive will help some. Plus, I would suggest you get the memory up to at least 512MB. I'm pretty sure your model iMac will take up to 1GB via 2 PC100 slots.

How do you install CS5 onto a new computer without Time Machine/file transfer

I'm not getting a new computer, but my current one is getting a little old (Macbook Pro V. 10.6.8) and I'm afraid it might crash if I download the newest Maverick system, which is why I want to make absolutely sure I'm able to save and transfer all my old files and CS5 Creative Suite programs if this indeed happens. I don't trust Time Machine to do it; my boss had this happen and Time Machine did not transfer the Adobe programs. I also don't want to rely on Time Machine and any other file transfer (which all new Macs offer) because I've had brand new computers crash because of old corrupt files from my old computer converting over, and the Apple people said it's a bad idea (which would have been nice to know BEFORE the computer crashed and everything. . .) I've been told you can only use the CD to install CS5 onto your computer twice, which I've already done (thanks to my brand new computer crashing once already). So I would like to know how it's possible to install the program onto a new computer should this one crash, without the use of file transfer or Time Machine. I have no interest in upgrading to CC.
Thanks!

Avoid using Time Machine for re-installing Adobe software. It rarely works and usually breaks the activation mechanism.
I've been told you can only use the CD to install CS5 onto your computer twice,
Not quite.
You can install the software as many times as you like but you can only activate the software for use on a maximum of two computers at the same time.
To re-install you will need your CS5 serial number.
Download the installer from Download CS5 products
Install then enter your serial number when prompted.

HDD crashed! How to install Tiger onto 867mhz G4 with no DVD drive??

Hi folks.
My trusty 867mhz G4 Quicksilver Powermac drive has finally konked out. It was running OS 9.2.2 before. Now I want to install Tiger as the OS.
Having only a CD drive (nope, can't read or write DVD's), how do I proceed to install Tiger (I have the original install disk) onto the brand new blank hard drive?
Possible tools that I have:
1) last generation 1.67mhz G4 powerbook
2) dual 2.5ghz G5 powermac
3) Lacie external firewire DVD drive
Things I have tried:
1) hold down "c" while starting up the Quicksilver with the Lacie DVD drive hooked up to it, hoping I can start up from the optical drive, which contains the Tiger install disk. Result: blank white screen that goes nowhere. Found out that the Lacie needs at least 10.3.9 to run.
I'm out of ideas.
Can someone tell me the right way to do this?

Thanks guys.
Didn't sleep at all last night, BUT, I did it!
1) Set the Quicksilver as a firewire target disk hooked up to my G4 1.67GHZ Powerbook. Result = frozen blue screen.
3) Set the Quicksilver as a firewire target disk hooked up to my dual 2.5GHZ G5 Power Mac. Result = frozen blue screen
So that got me thinking, the common thing about the Powerbook and Power Mac is that they both run Leopard. It makes sense to me that computers that already have Leopard installed will probably not run a Tiger installer.
So, I whip out the oldest and slowest computer I have, which is an old 550MHZ Titanium Powerbook, complete with 1 broken hinge, flickering screen and peeled paint. It runs Tiger. I set the Quicksilver as a firewire target disk hooked up to the Titanium Powerbook.
Voila! It works like a charm!
So for anyone facing the same problem, one of the possibilities is: you can do it with the computer set as a firewire target disk hooked up to another computer running nothing newer than Tiger.
Thanks again for your help guys!

Installing iTunes onto Windows RT 8.1

Hi
Is is possible to install itunes onto Windows RT 8.1 (Microsoft Surface Device)
I have tried downloading the latest versions of both the normal and x64 editions but both come up with "this app cant run on your pc"
I have also tried running as an administrator but doesnt help.
Any ideas or is it just not compatible with RT?
Thanks

RT is a watered-down version of 8 that only runs apps designed for it (like apps running on iOS). Only full windows 8 can run iTunes.

Can you install Tiger onto a drive with data?

Hello,
I would like to ask if you can install Tiger onto a hard drive that already has data files on it. I have a 250 GIG hard drive and it already has 10 GIGs of data on it. Can I install Tiger on this drive or might it corrupt my files?
Its a long story but here is a quick summary of why I am attempting to do this:
I have a 350 MHz Blue and white G3 (rev 1) with two hard drives: the original 12 GIG ATA drive and a 250 GIG SATA drive (internal) connected with a 1S2 Seritek SATA controller.
My 250 GIG drive has two partitions but only one is available to Tiger. You see, by accident I originally formatted my 250 GIG drive with an extremely small partion (32 Megs). I meant to type "30 GIGs" and by accident I typed "30 Megs". Oops That was supposed to be my OSX 10.4 volume. Its too late now - its too small. So I only have two choices for a place for TIger: my 12 GIG drive or the other partition of my 250 GIG drive. I am reluctant to choose my 12 GIG drive because it already has an older OS on it (OS 8.6).
I was concerned about installing TIger on the data partition of the 250 GIG drive because that is where all my valuable data files are - 10 Gigs of data. I don't want to risk scrambling this data in any way.
Is it safe to install Tiger onto this partition with my data files? Or is the possibility it might do something to my data.
Its only a temporary install so that I could burn my 10 GIGs of data files to DVD for backup and then I will start all over again and erase the entire hard drive and reinstall from scratch onto the 250 GIG drive once my data files are safely backed up. (I will not partition the 250 GIG drive i nthe final install - it will be one big partition.)
One other question:
When you format a disk in Tiger are there options to "low level format" or "zero all data" or will just a straight "erase" do the job sufficiently? I bought my 250 GIG Hitachi SATA drive new and so I am not sure if it worth the time to re-erase it with "zero all data" (if that is an option in the Tiger Disk Utility). What is the best formatting option to prepare this drive in the most beneficial for Tiger?
Thanks for any suggestions.

Thanks scb and Jeff,
Jeff, you have me thinking now. I think I will be safe and try another idea. I have a 4 GIG internal SCSI drive I could use to backup my data in 4 GIG sections at a time via my Adaptec 2430 SCSI card. I could then move this hard drive over to my other G3 onto its 40 GIG hard drive. This would be done three times to take off all my data and essentially provide a backup before I install Tiger. Good idea. You are right. It is better to play it safe.
By the way 8.6 can handle HFS+. And yes, I should eventually buy an external drive solution - probably an enclosure. I saw one called "coolmax" [1]. It could hold a SATA drive and it had USB, firewire and also an external SATA port.
And also Jef thanks for the info about formatting drives. I am glad to hear it is not important to zero all data if you don't have to. I am not concerned about havig anything to hide and so yes, I will just click "format" - that should be fine. Zero all data takes such a long time and I would rather avoid using it if I don't need this feature. Thanks for the advice.
Thanks for the new safer direction.
[1] Coolmax (CD-311-SATA Combo)
Coolmax Aluminum USB 2.0 External Case/Enclosure for 3.5" SATA/IDE Hard Drives, USB2.0, IEEE1394a, Serial ATA triple interface input CD-311-SATA Combo
http://www.iocombo.com/product/showproduct.php?productid=0EGD&PHPSESSID=3c41735b f27252cf17a17350cb603e0e
$69.95
http://store.yahoo.com/directron/35enclosure.html
$53.99 at directron

Clean Install Yosemite onto new SSD (Also, what is TRIM?)

Hi,
I've been researching how to replace the Hard Drive on my Late 2011 13inch Macbook Pro (MacBookPro8,1 / 2.4 GHz / Intel Core i5 / SATA III) with a new SSD (maybe a Samsung 840 EVO) and clean install Yosemite onto it. I've found a few ways to do this on the support forums and the macrumors forum, but I want to confirm if I can do it this way:
1. Plug new SSD into the Macbook via a USB cable
2. Download Yosemite onto current Macbook Hard Drive. When I'm prompted to install, chose the new SSD from the list. Complete Installation.
3. Remove old Hard Drive from Macbook and plug new SSD in it's place (and not in the optical bay).
Would this work? I have another external hard drive with all of my documents, pictures and music on which I'm just going to manually remove over, and have no problem doing. I can also download the iLife programs directly from the App Store so I wouldn't be missing out on those either (I do have the iLife '09 discs too). I've also read about creating a bootable USB using DiskMaker X, but I feel the route I outlined would be easier.
Am I missing anything? I do have the EFI Firmware v2.7, so the problems the 2011 MacBooks were having with SATA shouldn't be an issue during this. Also, during my research, I found a references to something called TRIM. Can someone explain TRIM to me?
Thanks,
Steve

Thanks for the response and confirming I can clean install Yosemite onto a new SSD using the process I listed in my initial post.
I have a 13'' MacBook Pro with Yosemite already installed onto it so my graphics card should be set. After almost a month of using it, I haven't noticed any issues on that end.
I guess this TRIM thing is a totally separate subject from this thread. I read Apple is no longer supporting third-party SSD for TRIM support. If you turn it on, but keep a security feature on, you risk your computer not booting correctly. It looks like the only way to have TRIM enabled on a SSD using Yosemite is to have an Apple supplied SSD, or an SSD that can trick Yosemite into thinking it's Apple supplied (like the Angelbird Wrk for Mac SSD).
I've also done a good amount of research that TRIM is only necessary if you're saving a lot of items to the hard drive in one sitting (like photoshop). I primarily use my Mac for Pages (which saves my documents into the cloud now), iTunes and Safari. I guess this would fit me into the "casual user' criteria? I've also read that if you don't use TRIM, your SSD uses "Garbage Collection" (which actually sounds terrible) to keep the SSD informed on what data can be overwritten since it's been deleted by the user. I read that most modern SSD hard drives have a pretty decent Garbage Collection function, so if you leave your computer idle, keep "Put the hard disk(s) to sleep when possible" unchecked, the SSD will run Garbage Collection on it's own and that should be sufficient enough to keep the SSD in good working order.

Installing Leopard onto a Non Intel based Mac

My friend just bought a new intel based Mac Pro with Leopard. It came with the install discs. Is it possible to take those discs and install them onto a computer that is a Dual 1.8 GHZ Mac that does not have an intel processor?
Thanks in Advance

no, it's not possible. It's also against ULA but in this case it won't matter because this will not work anyway.
You need to buy a retail version of Leopard to install it on your Mac.

Installing iTunes onto a PDA

Any tips on how I go about installing itunes onto my Mio A701 PDA. Is it even possible. Is has Windows Mobile managed to eliminate competition unfairly yet again.

Hi,
As you have already said, iTunes isn't supported. Therefore you cannot install iTunes.
Jim

Can I install Leopard onto a PC?

Can install Leopard onto a Dell PC or laptop?
If not, can I install any MAC OS on a Dell PC or laptop
instead of Windows Vista?
Thanks in advance:

Can you? Yes, it is technically possible. The more pertinent questions are: Is it a good idea and Is it legal. The answer to the former is maybe not. The answer to the latter according to Apple is no. In short, if you want to dump Vista and XP or Ubuntu aren't acceptable, put the Dulls up for sale and buy a Mac.

Can I install windows onto a flash drive in my ExpressCard/34 slot?

I want to buy a ExpressCard/34 SSD and install it into my MacBookPro. Then using Boot Camp, I would like to install Windows onto it. Is this possible?
Also, when installed, will the SSD Express Card be discrete and flush with the side of the MacBook Pro?

Hi,
Windows can not be installed onto external disks. Microsoft hasn't built this feature into Windows.
Although it seems to be possible to install Windows onto an USB-connected harddisk with some tricks, and ExpressCard connected HD (SSD or not) would simply not work, sincce the needed driver to access the ExpressCard slot is not present at installation and later on not present at bootup.
Sorry
Stefan

Installing Leopard onto a laptop with a broken internal DVD drive?

I'm trying to install Leopard onto my PowerBook G4 (yes, long past the warranty but she's an old workhorse). The internal DVD "super" drive has been broken for a couple of years, so I've got a nice, fast, solid Sony external USB 2.0 DVD/CD player/burner.
Just now I inserted the install disk into the drive. The disk mounted. Install window popped up automatically. Clicked the button to restart and install... the Mac restarts alright, but there's no installation happening (and no error message to tell me what's happening).
I've been searching the documentation and this forum and so far I'm stumped. Can anyone shed any light on this?
Is it simply impossible to install Leopard from an external USB drive? If so, is there a non-disk method anyone can suggest?

Please post the specs on your g4, lets make sure its possible first, then someone here can help get you going.
And to add to that, I am thinking that it would have to be a firewire disk drive to boot (?? Anyone?)
I also have to agree with Jeff, If you have another mac with a working dvd drive, or know someone (use beer as payment ) with a mac that would be quick and easy. If you do it as jeff suggests, then both macs need to be the same, or if they are different, you can put the disk in the borrowed mac, shut it down and restart holding the T key, putting borrowed mac into target mode, then hook you mac and borrowed mac together with a firewire cable, start your mac holding the alt/option key which will bring you to the disk selection screen, pick the Leopard disk and it should start the installation.
Make sure when you get to the point in the installer where it asks you which disk you want to install to, make sure you select your mac (as the borrowed mac's hdd will show up also)
The above method basically turns the borrowed mac into an external firewire DVD drive. K
Message was edited by: eschw95458

Is it possible to re install opentransport onto mavericks?

Similar Messages

Maybe you are looking for