Is it possible to set the sound output to Firewire and HDMI at the same time?

I would like to use Amarra for playing music thru the Firewire to a DAC and I would like the family to be able to use the MacMini for streaming sources thru the HDMI without having to change any settings every time. I'm running 10.8. Is that possible thru any special settings or separate software?
Thanks in advance
Harry

The Apple Support Communities are an international user to user technical support forum. As a man from Mexico, Spanish is my native tongue. I do not speak English very well, however, I do write in English with the aid of the Mac OS X spelling and grammar checks. I also live in a culture perhaps very very different from your own. When offering advice in the ASC, my comments are not meant to be anything more than helpful and certainly not to be taken as insults.
Do some web searches for using software called Soundflower in conjunction with other 3rd party audio software to set up your own audio input and output sources.
That is all I know about it. I have read a few ideas for doing such things over the years.

Similar Messages

Internet AND Airtunes, is it possible both at the same time??

Hi to all!!!
Here's the set-up:
I have a wireless router from my IP.
It broadcasts Wi-Fi for the 2 computers in the house.
No problems with that.
Then I have an Airport Express connected to my home sound system for it to play iTunes via Airtunes. For that to happen, I need to choose the "Apple Network 07xxxx" in the Airport Menu, disconnecting from the internet router.
So no internet while iTunes is playing via Airtunes...
I tried to connect to my internet wireless router with AX but it won't.
It not only doesn't connect to my IP's router, saying that on restart it doesn't find the desired wireless network and goes on blinking yellow. Then I need to re-configure the whole thing to use it only as a receiver for my amplifier...
It's pretty annoying since my 2 laptops, iPhone and any other device that comes in my home can connect without any problems to the internet router but the AX doesn't.
Is it possible to steam iTunes to an amplifier AND surf the net simultaniously via AX??
If so, what am I doing wrong ???
Can anyone help ??
Thank you

Is it possible to steam iTunes to an amplifier AND surf the net simultaniously via AX??
Yes.
Here are the basic steps to configure the AX as a wireless client for streaming iTunes:
Either connect to the AX's wireless network or connect directly, using an Ethernet cable, to the Ethernet port of the AX, and then using the AirPort Utility in "Manual Setup" mode, make the following changes:
Note: During the setup phase, you may want to temporarily place the AX near your existing wireless router to be sure it gets a good signal from it. After successfully reconfiguring it, you can move it to its desired location.
AirPort > Wireless
o Wireless Mode: Join a wireless network
o Network Name: <existing wireless network>
o Wireless Security: <select the encryption type of the existing wireless network>
o Wireless Password: <enter the existing wireless network password>
o Verify Password: <re-enter the existing wireless network password>
Music
o Enable AirTunes (checked)
o iTunes Speaker Name: <enter desired speaker name>
o iTunes Speaker Password: (optional)
o Verify Password: (optional)
o Click Update to write the new settings to the AX
In iTunes:
iTunes > Preferences... > Advanced > General
o Look for remote speakers connected with AirTunes (checked)

How much does it cost to replace an iPhone 5 from water damage? and can yiu upgrade at the same time?

I dropped my phone in the toilet, put it in rice for a week and it's still not working. I want to know a rough price of what it is to REPLACE my iPhone and possibly upgrade at the same time.

US $269, at any Apple store. And no, you can't "upgrade". You'll get exactly what you now have.

Is it possible to output multiple clips from a multitrack session, at the same time?

I'm using Audition CC 2014.2
on Windows 7 Pro x64
I am trying to figure out how to output several clips from a multitrack session, at the same time.
A session like this:
Is it possible to output 5 files right now?
I can select each one (or even multiple) and use File > Export > Multitrack Mixdown > Selected Clips to do one at a time only.
I'm hoping for a way to give each clip (or group of clips) a predefined filename, by perhaps using markers or something like that, which would then allow me to faster "automate" the exporting of each section into a different sound file.
This ability would be really helpful when using a single multitrack session to generate multiple sounds and a change to globally applied effects is made and all sounds now need to be updated.
Any ideas?

They are, yes, but I'm also working with multitrack sessions using clips made from various different sound files.
Ahh ok, use markers?
So, this sort of thing isn't possible in multitrack mode then?
If not, it sounds I'll have to "mix down" my multitrack session into a single file and set up the markers in Waveform Edit view.
That's an extra step I'd have to do, and after editing the multitrack session, surely some markers . . . oh wait, no . . . every time I output the new mix down file from the multitrack I'd need to redo all the markers. Drat . . .
Honestly, I am very new to Audition, but I'm about to plow into it, big-time, and I'm hoping for a nice non-destructive and fast workflow that'll enable me to output sets of sounds from the same multitrack session.
But, it seems like this functionality is currently missing.

I recently buy an apple iphone 4s.the problem is that when i started music player on my iphone the speaker is not outputting the sound.and when i lock the phone at the same time the sound starts.thos problem is from last 3 days.and i am really confused???

i recently buy an apple iphone 4s.the problem is that when i started music player on my iphone the speaker is not outputting the sound.and when i lock the phone at the same time the sound starts.thos problem is from last 3 days.and i am really confused???

Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new). Try each of these in order until the issue is resolved.
If the issue continues, take the device to Apple for evaluation and possible replacement.

Sound from tv playing thru 2 separate sets of speakers not @ the same time

Hi all,
I have my tv connected to my TV via the 3 component leads for the video and an optical lead for the sound. This works well as my TV has built in sub and surround sound processor plus 5 remote speakers so the 5.1 for films works well. But as the speakers are not that good, and certainly not Hi-fi quality listening to music thru them isn't that rewarding in fact its horrible. There is a spare set of audio out connectors (Analog RCA stereo audio) on the tv that would connect to the audio in on my hi-fi amplifier. I haven't tried it yet as i don't want to damage anything but i imagine doing this mean that sound will come out of all 7 speakers at the same time, with either films or stereo music.
Is there a way i can switch between the two sets of speakers (without un-plugging stuff) so i can listen to music on my quality speakers that are positioned correctly for stereo and then switch to the cheap ones that came with the TV that are positioned for 5.1 so i can watch a film.???
phil

Chenks wrote:
Is there a way i can switch between the two sets of speakers (without un-plugging stuff) so i can listen to music on my quality speakers that are positioned correctly for stereo and then switch to the cheap ones that came with the TV that are positioned for 5.1 so i can watch a film.???
the appletv has no option to switch between different outputs.
Thankfully...nothing more irritating than having to drill down menus to turn sound outputs on/off.
would it not be simpler to use your amp to switch?
Absolutely
Turn amp off/down when not neeeded, and turn volume of TV speakers down when not needed.
OP might like the sound of the 7 speakers on for films, but it there's any sync issues it would probably detract.

How do I set upmy Imac to allow using both my computer speakers and a Bose SoundLink system as outputs at the same time. I can use one or the other, but not both.

how do I set up my Imac to allow using both my computer speakers and a Bose SoundLink system as outputs at the same time. I can use one or the other, but not both. From systems Preferences I must select one or the other. I want both to work all the time.

Hi,
I would recommend you to use 0FI_AP_4 rather using both, particularly for many reasons -
1. DS: 0FI_AP_4 replaces DataSource 0FI_AP_3 and still uses the same extraction structure. For more details refer to the OSS note 410797.
2. You can run the 0FI_AP_4 independent of any other FI datasources like 0FI_AR_4 and 0FI_GL_4 or even 0FI_GL_14. For more details refer to the OSS note: 551044.
3. Map the 0FI_AP_4 to DSO: 0FIAP_O03 (or create a Z one as per your requirement).
4. Load the same to a InfoCube (0FIAP_C03).
Hope this helps.
Thanks.
Nazeer

There is no audio output on my MBA in the system preferences-sound folder. Therefore no sound comes from my computer. At the same time this happened, any streaming video stopped playing after 11 seconds, as well as iTunes will not play any song. Help!?

Hello everyone.
i have a 15" MBA circa 2011 running Lion 10.7.5 and my sound has gone, There is a no sound circle on my volume display and in system preferences sound my options for output is empty. At the same time this happened I noticed 2 things: 1) itunes would not actually play any audio track and every video i streamed stopped after a few seconds (usually 11s) but not always.
I have tried following some tips I have found online like going into MIDI and fixing the problem there, restarting in safe mode. Resetting with PRAM (or something that sounds like that).
Does anyone have any insight on this? At this point i'm thinking it's time to reload Lion but I don't really know how to go about that without losing all of my files.
Please Help
Thanks

Hello JaboorMBA2011,
Thank you for using Apple Support Communities.
For more information, take a look at:
Troubleshooting issues with no audio from built-in speakers on Macs
http://support.apple.com/kb/ts1574
Have a nice day,
Mario

Is it possible to output to div monitor and s-video at the same time?

I'm editing video and want to see the broadcast results on the fly (ie monitor and tv side by side, same image onscreen). Is it possible to output to div monitor and s-video at the same time? Maybe thru a splitter cable. I'm concerned about resolution issues.

This is not possible with a mini.

Is it possible to set the child index of items in the design view?

Is it possible to set the child index of items in the design view? I have a large png that is on top of everything in design view which is really annoying

Yes it is possible to do so. Goto View>>Tools Pallete. This will open up a tools pallete which you can use to modify the colours and other viewing options of graphs and anything else on the front panel.
For your purpose u select the background of the graph and click on the "set colour squares" present in the lower bottom corner of the pallete. This will open up a whole range of colors you can select for the purpose. There in the black and white strip of colours, there is a box titled "T" on the right most corner. Select that "T" and your background color will go transparent.
Have a nice day. Happy codings.
Regards
Asad Tirmizi
Design Engineer
Institute of Avionics and Aeronautics
" Its never too late to be, what u want to be"
Using LabVIEW 8.2

Is it possible to set the firefox back button to a custom action in the context of a websocket connexion?

Simply, is it possible to set the firefox back and forward button to custom javascript function to navigate in a websocket application.
Thanks in advance

You may get lucky, especially as Today is a "Sumo Day" with more contributors around than usual. Such a question tends to be slightly off topic, being a hack of a standard Firefox installation.
What I would suggest is that you try other forums, either a specialist linux forum or the popular Mozillazine forums: http://forums.mozillazine.org/index.php

Is it possible to set the stateof a command button

I want to call a function when the user presses a command button (left click), then wait until he releases the mouse button, then call a second function.
Here is the code for EVENT_LEFT_CLICK:
CallFunction_1(...)
GetRelativeMouseState(panel, control, 0, 0, &mouseLButton, 0, 0);
while(mouseLButton)
ProcessSystemEvents();
ProcessDrawEvents ();
GetRelativeMouseState(panel, control, 0, 0, &mouseLButton, 0, 0);
CallFunction_2(...)
My Problem is, that the button does not chage its state to "pressed", so it appears to the user that he has not clicked on it.
Is there any possibility to set the command button th the pressed state?

The reason for this is that the LEFT_CLICK event has not been processed yet. We allow you to "swallow" any event to basically eliminate the built in effect of that event. In your case you want the normal effect of the LEFT_CLICK event to occur (button appears pressed on the panel), but you also want to launch a loop to check when the mouse has been released. This is easily done through posting a deferred call. A deferred call allows the current event to be completed and then calls the deferred callback after that. So your code would be changed to:
In LEFT_CLICK,
CallFunction_1(...)
PostDeferredCall (funcName, (void*)control);
Then write a function "funcName" with prototype:
void CVICALLBACK funcName (void *callbackData);
and code:
void CVICALLBACK fu
ncName (void *callbackData)
int control = (int)callbackData;
int mouseLButton = 0;
GetRelativeMouseState (panel, control, 0, 0,
&mouseLButton, 0, 0);
while(mouseLButton)
ProcessSystemEvents();
ProcessDrawEvents ();
GetRelativeMouseState (panel, control, 0, 0,
&mouseLButton, 0, 0);
CallFunction_2(...)
This should solve your problem.
Best Regards,
Chris Matthews
Measurement Studio Support Manager

Is it possible to set the cell height in a cell style?

In the attached screenshot, the cell height is set to exactly 0.125. I put my cursor in the cell, then opened the cell styles panel and created a new cell style based on this cell. But when I apply the cell style to other cells, it does not apply the cell height. There were no overrides or other styles applied to the other cells. I also opened up the cell style definition from the cell styles panel, but don't see anywhere to set the cell height there either. Is there another way to do this that I am missing?

It is possible - and it's fairly simple.
To set the row height as part of the cell style, all you have to do is use the cell inset above and below. As long as you set the style as 'At least' then this works perfectly well for having predefined cell styles.
I have been using this successfully for large financial documents for some time without any hitches. For example I use it to get separation between sections within the tables by having a style with extra space above, and similarly for totals rows at the bottom of the table. It can of course also apply different stroke styles at the same time. Having the style set as 'At Least' also allows for multiple line entries to still have the correct spacing above and below.
So if you spend a bit of time calculating required heights and setting up your styles, then apply a keyboard shortcut to each style, you can then save a whole lot of time when formatting the document.
I've just finished nearly 400 pages of financials using this method over the past couple of days!
This solution may not suit your sitation, but if you have a lot of tables to get through it's got to be worth giving it a try.

[Q]Is it possible to set the hostname as DBCS character like Korean

My question is that is it possible to set the hostname as double byte character set like Korean or Japanese.
If possible, What kind of limitation does exist?
Thanks

Not that I've found, no : http://www.apple.com/feedback/ipad.html

Is it possible to set the default colours in the swatches palette in Illustrator CS4?

Is it possible to set the default colours in the swatches palette in Illustrator CS4? What I mean is replace the swatches default colour palette with my own, so that each time I create a new document it comes up with my colours rather than Illustrators.

You might also consider using color groups with Illustrator. Let me know what you think. It may help you out with projects that use the same color preferences.
Check out the tutorial here:
http://www.adobe.com/designcenter/illustrator/articles/lrvid4019_ai.html
Let me know if this helps you.
Vicente Tulliano

Is it possible to set the sound output to Firewire and HDMI at the same time?

Similar Messages

Maybe you are looking for