Is it possible to start a sending file adapter by using a mapping lookup fu

Our Scenario:
1) SAP ERP generates a file and an IDOC with information about
(path/filename and receiver system)
2) XI takes this IDOC and should collect the file from SAP FTP
3) Depending on the information XI should send the file to the correct receiver
Best regards
Daniel

Hi Daniel,
ftp adapter cannot work in sync mode (cannot take a specific file)
in one of your requirements like that we created
a java proxy to handle that (asynchonous)
it fetches the file and sends it to the XI
BTW
if you have IDOC with filename and if you can use a
proxy then you won't even have to use a BPM for that
Regards,
michal
<a href="/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions">XI / PI FAQ - Frequently Asked Questions</a>

Similar Messages

Sender File adapter : Alert are possible.

Dear All
i had a Scenario of file to jdbc.I am using FCC(content conversion ) at sender file adapter.
if the file is not having proper text field,or if its's blank file...
i want to generate an alert..
while testing with a blank file , my file sender adapter is giving the error but their are no alert...
even in alert rule , i had specified file adapter ,Sender/Receive interface also
Rsalerttest : working properly.
Rsalertdisp : no dump for sender file adapter error
for mapping error my other alert rule are woking and generating the alert sucessfully.. for the same interface
any guess where could be the error..
Regards
Ajay Pant
null
Message was edited by:
 ajay pant

HI,
For alert configuration see the belowlinks,.But in your case if the send message having the empty fields, we can handle this in FCC parameters
xml.fieldoptional = yes
Parameter NameA.fieldFixedLengths defined.
○ If the inbound structure contains more fields than in NameA.fieldNames or NameA.fieldFixedLengths the conversion is executed.
Additional fields in the structure are ignored.
○ If the inbound structure contains less fields than specified in NameA.fieldNames, conversion is terminated with an error message.
If the last field only is shorter than defined or is missing completely, the conversion is executed. The contents of the last field are then applied to the XML element as found. Consequently, the value can be incomplete or empty.
/people/michal.krawczyk2/blog/2005/09/09/xi-alerts--step-by-step
for CCMS
/people/aravindh.prasanna/blog/2005/12/23/configuring-scenario-specific-e-mail-alerts-in-xi-ccms-part--1 -- ccms alerts - 1
/people/aravindh.prasanna/blog/2005/12/24/configuring-scenario-specific-e-mail-alerts-in-xi-ccms-part-2 -- ccms alerts -- 2
/people/aravindh.prasanna/blog/2006/02/20/configuring-scenario-specific-e-mail-alerts-in-xi-ccms-part-3 -- ccms alerts --- 3
Chilla

Sender File Adapter - remote FTP server program execution

Hi all,
I have a scenario
X12 -> XI -> File
where sender File adapter is used. The input file is X12 txt document which needs to be converted into X12 xml format. I have created astylus studio XSLT mapping which uses Convertor to convert this txt file to X12 XML.
I don't know how to configure sender file adpater to run this mapping on the source file before picking it up. have created a windows batch file on the FTP server which runs tis XSLT mapping on the txt file and replaces it with X12 format xml. This batch file uses command line parameters of stylus studio to run XSLT mapping on input txt file and generates an xml.
I am not sure how to run this mapping on the input file before processing starts in PI file adapater.
I tried running command line parameters of Sender file adapter but that didn't worked.
Please help.
Thanks
-Kulwant

Hi, Kulwant:
Looks like you would like to execute your mapping program before file adapter pick it up.
Right ? for one interface, it seems out of the XI scope, however if this is your requirement, you can separate into two interfaces:
The first interface is file to file scenario, it is used to execute your mapping program:
The file sender just pick up the txt file, send to integration engine.
Your Message Mapping program need to specify your XSLT mapping, after the mapping, the message is XML format,
then you will use file receiver to send it to certain directory.
Now the XML format file is your input of your second interface.
Regards.
Liang

Sender File Adapter - Restrict number of file polled at each poll interval

Hi all,
PI 7.0 SPS16.
We would like to know whether it is possible to configure a sender file adapter (file conversion mode) in order to restrain the number of file taken at each poll interval and if yes how ?
Thanks for your future answers.
Jean-Charles

Hi Jean
Standard adapter do not provide functionality to take an input like number of files to be taken at poll interval. But using adapter module you can achieve this.
SAP PI is having the function to set poll timings and scheduling. You can write adapter module and execute this module using File adapter type communication channel before the standard bean and you can restrict the number of files.
Check the link given above as well as this How to Guide
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/3bdc14e1-0901-0010-b5a9-a01e29d75a6a
Thanks
Gaurav

Mapping problem due to FCC in sender file adapter

Hi All
I am doing File( Flat File ) to RFC Scenario.it is working fine..
the problem comes in mapping with multiple records.
FCC at sender file adapter is used
my Data Type are :
Source DT Target RFC import parameter(table).
E2ED20* ITEM*
 KEY VBELN
 VBELN POSNR
E2E24* CHARG
 KEY
 POSNR
 CHARG
*->>multiple occurence
E2ED20 and E2E24 are 2 segment ,KEY is used in FCC to identify E2EDL20 & E2EDL24
My source text file is like this :
E2EDL20 0200
E2EDL24 xyz
E2EDL20 0201
E2EDL24 abc
E2EDL24 efg
E2EDL24 mln
E2EDL20 0202
E2EDL24 gty
so the payload should be :
0200 xyz
0201 abc
0201 efg
0201 mln
0202 gty
in FCC ignoer record set= true
otherwise is not called...
i try to use split by value & use oneasmany , not helpfull.
in message mapping when i checked th field VBELN -> display queue
i am getting an array 0200
 0201
 0202 in white fields
thanks & regards
Ashutosh Rawat

Source payload
<?xml version="1.0" encoding="utf-8" ?>
- <ns:MT_MATNO_FILE xmlns:ns="urn:abc:xxx">
- <E2ED20>
<KZ>E2EDL20</KZ>
<FIELD1>020</FIELD1>
<VBELN>0083662685</VBELN>
</E2ED20>
- <E2E24>
<KZ>E2EDL24</KZ>
<FIELD2>020</FIELD2>
<POSNR>900001</POSNR>
<CHARG>1078629</CHARG>
<LFIMG>3200</LFIMG>
<MEINS>PCE</MEINS>
</E2E24>
- <E2E24>
<KZ>E2EDL24</KZ>
<FIELD2>020</FIELD2>
<POSNR>900002</POSNR>
<CHARG>1078630</CHARG>
<LFIMG>1895</LFIMG>
<MEINS>PCE</MEINS>
</E2E24>
- <E2E24>
<KZ>E2EDL24</KZ>
<FIELD2>020</FIELD2>
<POSNR>900003</POSNR>
<CHARG>1079145</CHARG>
<LFIMG>1883</LFIMG>
<MEINS>PCE</MEINS>
</E2E24>
- <E2E24>
<KZ>E2EDL24</KZ>
<FIELD2>020</FIELD2>
<POSNR>900004</POSNR>
<CHARG>1079146</CHARG>
<LFIMG>3195</LFIMG>
<MEINS>PCE</MEINS>
</E2E24>
- <E2ED20>
<KZ>E2EDL20</KZ>
<FIELD1>020</FIELD1>
 <VBELN>0083662648</VBELN>
</E2ED20>
- <E2E24>
<KZ>E2EDL24</KZ>
<FIELD2>020</FIELD2>
<POSNR>900011</POSNR>
<CHARG>1001450</CHARG>
<LFIMG>2946</LFIMG>
<MEINS>8PC</MEINS>
</E2E24>
- <E2ED20>
<KZ>E2EDL20</KZ>
<FIELD1>020</FIELD1>
 <VBELN>0083673936</VBELN> </E2ED20>
- <E2E24>
<KZ>E2EDL24</KZ>
<FIELD2>020</FIELD2>
<POSNR>900012</POSNR>
<CHARG>1073953</CHARG>
<LFIMG>2458</LFIMG>
<MEINS>PCE</MEINS>
</E2E24>
</ns:MT_MATNO_FILE>
at target what required is
<item>
<VBELN>0083662685</VBELN>
<POSNR>900001</POSNR>
</item>
<item>
<VBELN>0083662685</VBELN>
<POSNR>900002</POSNR>
</item>
<item>
<VBELN>0083662685</VBELN>
<POSNR>900003</POSNR>
</item>
<item>
<VBELN>0083662685</VBELN>
<POSNR>900004</POSNR>
</item>
<item>
<VBELN>0083662648</VBELN>
<POSNR>900011</POSNR>
</item>
<item>
<VBELN>0083673936</VBELN>
<POSNR>900012</POSNR>
</item>
in Sender FCC
E2ED20.fieldFixedLengths 7,76
E2ED20.fieldNames KZ,VBELN
E2ED20.keyFieldValue E1EDL20
E2ED20.endSeparator 'nl'
E2E24.fieldFixedLengths 7,24,13,7,3
E2E24.keyFieldValue E1EDL24
E2E24.fieldNames KZ,POSNR,CHARG,LFIMG,MEINS
E2E24.endSeparator 'nl'
ignoreRecordsetName true
source file is already there...
Message was edited by:
 ashutosh rawat

Sender File Adapter Not Showing in Decentral Adapter Engine

Hi,
We have recently implemented a Decentral Adapter Engine on a windows box. The adapter engine seems to be working fine because my adapters show and seem to work fine in it.
However, when I define a Sender File Adapter that uses File Content Conversion message protocol instead of just File messaeg protocol, the adapter does not show up in the decentral adapter engine.
I made sure that Adapter Engine parameter in the Sender File Adapter shows the new adapter engine but that does not seem to be working. If change the Adapter Enginer parameter to show the Central Adapter Engine, then I can see the Sender File Adapter on the Central Adapter engine and it works fine. (Note: The Central Adapter Engine is installed on a Unix box)
Here are the paramters I defined for the Sender File Adapter:
- Transport Protocol: File System (NFS)
- Message Protocol: File Content Conversion
- Adapter Engine: (new Adapter Name)
Source Directory: (
server/drive/path)
File Name: purchaseOrder.txt
Quality of Service: Exactly Once
Poll Interval (secs): 60000
Poll Interval (msecs):
Retry Interval (secs):
Processing Mode: Archive
Add Time Stamp (checked)
Archive Direcotry: (
server/drive/path/archive)
Process Read-Only files: (not checked)
Processing Sequence: By Name
Fiel Type: Text
File Encoding:
Operating System Command:
Additional Files (not checked)
Content Conversion Parameters
Document Name: MT_Request_File_Data
Document Namespace: http://nxy.tots/fg_admin
Document Offset:
RecordSet Name: Purchasing
RecordSet Namespace:
RecordSet Structure: Purchase_Record,*
RecordSet Sequence: Ascending
RecordSets per Message: 1
Key Field Name:
Key Field Type: String(Case-Insensitive)
Purchase_Record.fieldFixedLengths: 8,4,2,10,10,12,18,12
Purchase_Record.fieldFixedType: char
Purchase_Record.fieldNames: Request_Action,Request_PO_Num,Request_PO_LN,Request_PO_Date,Request_Purchasing_Org,Request_Purchasing_GName,Request_Created_By,Request_Vendor_Name
Purchase_Record.fileContentFormatting: trim
Adapter Status: Active
Advanced Mode: (not checked)
Your help is much appreciated.

Hi Alaa,
look into this document:
http://service.sap.com/nw-howtoguides -> Exchange Infrastructure -> Troubleshooting: Adapter Engine 3.0 (Expert Call slides)
If the File Adapter works without conversion, then you should count the number of fields in a row. If it differs from the configuration, then it runs on error.
Another idea is to check the content type of the file. When you do not enter a File Encoding, then the file adapter assumes utf-8. If the file is for example latin-1, then the number of characters in a row are not counted correctly.
Regards
Stefan

Sender File Adapter - No error, but not generating any message

I am working on a file to RFC scenario. The sender file adapter is using content conversion to read a comma delimited file. The file is being picked up and archived correctly, and the adapter monitor does not show any errors. However, the process disappears at this point. I don't see any messages in SXMB_MONI, and there is no sign that the process is reaching the RFC adapter. Has anyone ever had this happen before?
I have four line types for Buildings, Additions, Floors, and Rooms.
I list all four in the recordset structure, and I identify a key for each with the keyFieldValue parameter. I list a fieldSeparator of ',' and an endSeparator of 'nl' for each row. And i have a list of the fieldnames in the fieldnames parameter.
The only thing i'm not sure about is the keyFieldinStructure parameter. I have specified ignore there, because I don't want that field in my XML. Do I still need that field in my sender datatype, even if I'm ignoring it, or can I leave it out?
Thanks for any help. Please don't just list blogs unless they have something you think is helpful with my specific problem. I have already read all of the blogs that deal generally with the sender file adapter and file content conversion, and I need more specific help at this point.

I made one error before, it IS showing up in the Recovered Adapter Audit Log (it took that log about 10 minutes to open that particular tab so I didn't notice them there).
Here is what it says there:
2006-06-12 11:22:59 Success Channel CC_S_File_FIPM_Buildings: Entire file content converted to XML format
2006-06-12 11:22:59 Warning Channel CC_S_File_FIPM_Buildings: Empty document found. Proceed without sending message
2006-06-12 11:22:59 Success File "/interfaces/one line building.txt" archived after processing
Here are my parameters in the file content conversion:
Buildings.fieldNames RecordType,PLTXT,STORT,STREET,POST_CODE1,CITY1,REGION,PARNR,X_COORD,Y_COORD,ASSIGN_SQ_FT,BLDG_NUM,CAMPUS,GR_SQ_FT,NET_SQ_FT
Buildings.keyFieldValue 'B'
Buildings.fieldSeparator ','
Buildings.endSeparator 'nl'
Buildings.keyFieldInStructure ignore
Additions.fieldNames RecordType,ASSIGN_SQ_FT,BLDG_ABBR,CAMPUS,ADDITION,BLDG_USE,BLDG__NUMBER
Additions.keyFieldValue 'A'
Additions.fieldSeparator ','
Additions.endSeparator 'nl'
Additions.keyFieldInStructure ignore
Floors.fieldNames RecordType,BLDG_ABBR,CAMPUS,ADDITION,FLOOR,ASSIGNABLE_SQUARE_FOOT,BLDG_NUMBER
Floors.keyFieldValue 'F'
Floors.fieldSeparator ','
Floors.endSeparator 'nl'
Floors.keyFieldInStrucutre ignore
Rooms.fieldNames RecordType,SHTXT,MSGRP,ADDITION,ASSIGNED_DEPT,BLDG_ABBV,FLOOR_CAMPUS,AREA,RCD_CODE,DEPT_CODE,BUILDING_NUMBER,ROOM_COMMON_KEY
Rooms.keyFieldValue 'R'
Rooms.fieldSeparator ','
Rooms.endSeparator 'nl'
Rooms.keyFieldInStructure ignore
And here is my data type:
<?xml version="1.0" encoding="UTF-8"?>
<ns0:MT_FIPM_BuildingUpdate xmlns:ns0="urn:XXXXXX:FIPM:Buildings:SYS">
 <Buildings>
 <PLTXT/>
 <STORT/>
 <STREET/>
 <POST_CODE1/>
 <CITY1/>
 <REGION/>
 <PARNR/>
 <X_COORD/>
 <Y_COORD/>
 <ASSIGN_SQ_FT/>
 <BLDG_NUM/>
 <CAMPUS/>
 <GR_SQ_FT/>
 <NET_SQ_FT/>
 </Buildings>
 <Additions>
 <ASSIGN_SQ_FT/>
 <BLDG_ABBR/>
 <CAMPUS/>
 <ADDITION/>
 <BLDG_USE/>
 <BLDG_NUMBER/>
 </Additions>
 <Floors>
 <BLDG_ABBR/>
 <CAMPUS/>
 <ADDITION/>
 <FLOOR/>
 <ASSIGNABLE_SQUARE_FOOT/>
 <BLDG_NUMBER/>
 </Floors>
 <Rooms>
 <SHTXT/>
 <MSGRP/>
 <ADDITION/>
 <ASSIGNED_DEPT/>
 <BLDG_ABBV/>
 <FLOOR/>
 <CAMPUS/>
 <AREA/>
 <RCD_CODE/>
 <DEPT_CODE/>
 <BUILDING_NUMBER/>
 <ROOM_COMMON_KEY/>
 </Rooms>
</ns0:MT_FIPM_BuildingUpdate>
I'm going to recheck everything again, but maybe you guys will see something? I don't.
Vanda

Sender File Adapter always "Polling interval started" without complete

Hi,
I have problem with sender file adapter suddenlty the status from Communication Channel Log monitoring always with polling started without completed.
4/25/11 11:40:33 AM   Polling interval started. Length: 10.0 seconds
4/25/11 11:40:23 AM   Polling interval started. Length: 10.0 seconds
4/25/11 11:40:13 AM   Polling interval started. Length: 10.0 seconds
4/25/11 11:40:03 AM   Polling interval started. Length: 10.0 seconds
Normal :
4/25/11 11:41:50 AM   Polling interval started. Length: 10.0 seconds
4/25/11 11:41:50 AM   Processing finished successfully
4/25/11 11:41:50 AM   Processing started
4/25/11 11:41:40 AM   Polling interval started. Length: 10.0 seconds
4/25/11 11:41:40 AM   Processing finished successfully
4/25/11 11:41:40 AM   Processing started
I have tried to stop and start the channel but still no luck. This problem only happen for this particular communication channel others channel is working fine.
Please advise other solution before i need to restart the java engine since this in the production environment. The problem is some of the process was delayed because this issue. CC was delayed to pickup the file.
Thank You in advance.
FL

Hi Abhistek,
Thank you for your correction. It was typo.
Which assumption is correct ?
1. All 3 instance running together in the same time ? or
2. Either 1 of the instance running once time manage by clustering setting.
Example :
15:01:00   ---> A
15:02:00 -
> A
15:03:00 -
> B
15:04:00   -
> B
Currently :
15:01:00   -
> A
15:01:00   -
> B (lock)
15:02:00 -
> A
15:02:00 -
> B (lock)
It seems all 3 instance lose control from clustering ?
Regards
FL

Multiple directory locations in Sender File adapter

Hi All,
I have a scenario where my single adapter needs to poll from 7 different directory locations. Is it posible to configure all seven sorce directory location in single sender file adapter.
Regards,
Xier

Hi,
I apologize for wrong information, actually I never tried but it's possible after seeing this.
Note:821267
11. File Sender: Processing Multiple Source Directories
Q: Can the File Sender Adapter be configured to poll multiple source directories from a single channel?
A: This functionality is available starting with XI 3.0 Support Package 14 as well as PI 7.0.
raj.

Read uniquely named file. Sender File Adapter unsuitable for synchronous

Hi All,
We have a requirement to read a specific file that has a unique name based on a transaction ID. The transaction ID will be passed from the source application.
The communication is required to be synchronous. There could be multiple requests/files generated and present at the directory at any given time but each corresponding to a specific transaction ID. If the file is not yet generated for that transaction ID we return back an error to the calling system.
I think we can not use Sender File Adapter - because of the dynamic naming and also because we have to return a synchronous response back depending on the file availability. i.e. We can not have a defined pattern in the file name nor can we specify a wild card as there could be more than one files in the location.
In theory we could use the File Sender adapter to read all the files in the directory and a BPM with correlation set based on the transaction ID and let the process wait for the request. But as far as possible I want to avoid this unnecessary wait or extra demand on the system. More so because the files could get big.
If I were using a tool like SAP Business Connector or webMethods then I would I used a readFile Java service and given it a filename to return the required bytes in a synchronous read.
Is something like this possible in XI? If someone has written a synchronous Java to read file can they share the code? Or do you suggest I write a ABAP server proxy to read the file? The problem however will be how do we map the data to a XML within the code.
All suggestions welcome. There has to be a simple and effective solution to this mundane requirement !
Wishing all SDNers a bright start to this new year,
Thanks,
Charu
Message was edited by:
Charu Kulkarni
"The transaction ID will be passed from the source application so we know what file to pick"

Hi,
You could make the scenario a little simple and avoid custom development if the logic can be put into scripts(out of XI).
Say all the files are coming into a directory called D1.
Here, you could use a script to arrange all these in an order (say ascending) and move the first file into another directory D2.
The sender file adapter would poll this directory D2. The adapter can have a wild card character for the filename field now.
Once the file is in XI, you could check this against the transactionId present(I am not sure how you get this though!), and determine whether to send a mail, or to send a file back.
Here, I have assumed that there is somekind of order present in the files placed in the directory D1.
Again, this is just a suggestion.. I might be wrong with all the assumptions.
Regards,
Smitha.

Sender File adapter Pooling

Hi ALL,
1)while creating the file in the FTP server i want the sender file adater to wait or lock from polling the file getting created and start picking the file once its completely crated.
i am told that we need to write OS commends to handle this ..if any one has done this can you pls help..with the command.?
2)is there any way to handle this issue with having a trigger file which intimates the adapter to pick the actual data file .. ?
thanks
Souz

2)is there any way to handle this issue with having a trigger file which intimates the adapter to pick the actual data file .. ?
You can use use "Specifying Additional Files" to achieve ur secnario.
Trigger fileName: PickupFile.trg (Specify this file name in Sender File adapter)
ActualFileName: Pickupfile.txt (Specify these details in Specifying Additional Files)
Use the payload swap bean to swap between Trigger file & actual file. The Actual file can be used in further processing like msg mapping...
Limitations:
All additional files must be in the source directory.
The name of the additional file is determined from the file name that was assigned for the XI message under File Name
No file content conversion is possible
http://help.sap.com/saphelp_nw04/helpdata/EN/3c/b4a6490a08cd41a8c91759c3d2f401/content.htm
Regards,
Siva Maranani

Using wildcards (*) in sender file adapter - FTP type

Hi guys!
Dooes it work using wildcards in sender file adapter (FTP type(!) (filesystem obviously work))? I tried it and it failed. it works only for exact name..
I read some articles about FTP and the result is, that ftp work always only with 1 file, so I'm wondering, if this is possible.
Thanks for info!
Olian

Thanks for all replies..
I know of course, that * can be used, I use it in many scenarios too. But on a FileSystem. It is not working if the sender type is FTP.
*, ., *.dat, ... nothing like that works.. Just exact file name.
I am able to pick up file, if I specify it's exact name, so there should be no problem with permissions..
Please, I'd appreciate one reply with comfirmation: yes, we are using asterisk (*) , we access source files via FTP and they are processed.
Is there anybody with this experience, that it works?
Thank you!
Olian

KeyFieldValue in Sender File Adapter Not Working

Hi,
I have a flat file like this...
1Field1Field2Filed3.....
2Field1Field2Field3....
1Field1Field2Filed3.....
2Field1Field2Field3.....
1Field1Field2Filed3.....
2Field1Field2Field3....
My requirement is to pick only lines starting with '1'.
I have configured the Sender File Adapter like this,
Recordset Structure : SOURCE,*
Key Field Name: KF
Key Field Type : String(Case-Sensitive)
File Content Conversion:
SOURCE.fieldFixedLengths 1,5,5,5....
SOURCE.fieldNames KF,FIELD1,FIELD2....
SOURCE.keyFieldValue 1
After all this, still it picks up all the recored instead of records starting with '1'. Can any one solve this?
Regards,
Sreedhar

If you feel module processor is bit tough you can use XSLT Mapping which is simple in sloving ur problem.
Check this blog to do a sample example using module processor.
/people/sap.user72/blog/2005/07/04/read-excel-instead-of-xml-through-fileadapter
To implement the above check this link....
https://websmp201.sap-ag.de/~sapdownload/011000358700003237612005E/HowToCreateAdapterModules.pdf
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/e21106cc-0c01-0010-db95-dbfc0ffd83b3
http://help.sap.com/saphelp_nw04/helpdata/en/8b/895e407aa4c44ce10000000a1550b0/content.htm
/people/gowtham.kuchipudi2/blog/2006/01/13/stop-creation-of-an-empty-file-from-file-adapter-using-module

Is Sender File Adapter always throws error when there is no file?

Hi,
I have a simple question but can't find a straight answer to it. I have a Sender File adapter that configured to pick up file XXX* from FTP server every 1 hour. But a file can come every 2, 3, or 7 hours- no certain time.When there is no file I got "File not found " error. As we use alerts, this behaviour is not acceptable.
Does this error comes always if there is no file? Any possible way to avoid this error ?
Thanks for help.
Nataliya

Hi Ravi,
I can see the error in Runtime Workbench under CC monitoring. To be precise it says:
An error occurred while connecting to the FTP server '1X.1XX.XX.XX:21'. The FTP server returned the following error message: 'com.sap.aii.adapter.file.ftp.FTPEx: 552 RMS-E-FNF, file not found, ES4_SAP*'. For details, contact your FTP server vendor.
My ftp server has the following set up:
Server: xx.xxx.xx.xx
Port:21
Dataconnection:Active
Timeout:120
Connection secuirity: None
User name .... etc set up.
Connect mode: Per file transfer
Transfer mode:Text
QoS:EO
Pollinterval: 120 (for test purposes)
Processing Mode: delete
Can it be that its a ftp server generates error and sends back to XI?
Thanks,
Nataliya

How to get the filename in mapping when using sender File adapter?

hi Experts,
   I have scenario where XI reads the input file using Sender file adapter.
   The file name is configured in the communication channel.
   In my message mapping it is possible to read this file name?
Thanks
gopal

Hi Gpoal,
Use Dynamic Configuration - /people/michal.krawczyk2/blog/2005/11/10/xi-the-same-filename-from-a-sender-to-a-receiver-file-adapter--sp14
Regards,
Geetha

Is it possible to start a sending file adapter by using a mapping lookup fu

Similar Messages

Maybe you are looking for