Is it possible to use a custom ringtone in the windows Jabber client 10.5.1? If so how do I point Jabber to the ringtone?
Is it possible to use a custom ringtone in the windows Jabber client 10.5.1? If so how do I point Jabber to the ringtone?
In Jabber for Windows 10.6, you can change the ring tones.
Similar Messages
-
I purchased a ringtone FROM my iphone. The purshcase appears in "Music" on my phone; but how do I set it as a Ringtone?
grrrr...if anybody has figured this out, I'd love to hear what you did. I have the same problem. I can't set a ringtone that has downloaded to my music library as a ringtone. Is this a secret? I've read everything I can in the manual. The only thing I saw was ringtones are located in your music library.
-
When I open a file it normally opens in 12.5% stated on the header. For some reason, it now opens with 100+% on the header and is much smaller in size. How do I go back to the first option I noted? I use AP to work on blueprints for measuring so the accuracy matters. Any direction would be greatly appreciated. Thank you.
Are the image all the same size the % files open into a document seems to vary with the number of pixels the image being opened has. Check the Image size.
-
I'm looking to use Bootcamp on my iMac 24". If I download Windows 7 from the Windows website, can I properly install it to my Mac? Do I need the disks instead?
I'm hoping to download it from their website because I can pay $30 for the student discount instead of $119...When burning the .iso file to a disc restrict the burn-speed to 2x
Otherwise the disc will most likely not work.
It's a common phenomenon on Macs.
Regards
Stefan -
I can no longer read PDF files. The window opens and then disappears after a second or two. This began after the last Adobe update. I tried accepting the Adobe terms using Eula.exe but that disn't solve the problem. What do I do?
Can you open Adobe Reader by itself? If so, try disabling Protected Mode [Edit | Preferences | Security (Enhanced)].
-
I am using the hp 3525 model printer , i like to know how to take photo print from the printer
Hi,
I am using the hp 3525 model printer , i like to know how to take photo print from the printer .
Regards
Mukesh.RHi Mukesh,
I'd like to help, but can you clarify the issue? Are you asking how to print a photo from your printer? Also, can you confirm that your printer is a HP Deskjet Ink Advantage 3525 e-All-in-One Printer?
Thanks!
Tara
**Although I am an HP employee, I am speaking for myself and not for HP. -
Hi I've downloaded a ringtone to my iphone and now I can't find it - how do I set it as my ringtone?
ThnxIt should be in the Videos app (iTunes on the iPad is just the iTunes store) :
If you can't find it in there then have you got a film age rating set in Settings > General > Restrictions that is hiding it ? -
How To Use a Custom Close Button In Window Component
Hello,
I have a window component, with the default close button
turned off, and a new custom close button added to the movie clip
that is displayed inside the window component. How do I get a click
on the close button to close the window?
This is the code I currently have to create the window (and
the listeners to close the window using the default close button):basicalyyou have to use
myWindow.deletePopUp();
if my memory serves the content mc is loaded into a mc called
contentHolder, inside the window component, so
if you are referencing the window from the scope of your
loaded mc it will be
this._parent._parent.deletePopUp();
or if from the button's scope
this._parent._parent._parent.deletePopUp();
try traceing the parantage down til you hit the window. -
Using a custom certificate store for SCCM 2012 clients and primary site server
I have read what seems to be all the pki related documentation out there for SCCM 2012. I have a PKI infrastructure up and running issueing certificates with an offline root through group policy autoenrollment. The problem that i'm faced with is we are migrating
from SCCM 2007 that was in native mode and we chose not to use the CA that we used for the old SCCM environment. When the clients attempt to communicate with the M.P. it runs through all of the different certificates and adds a tremendous amount of overhead
to the M.P. We will have ten's of thousands of clients by migration end. Could someone please point me to a document that goes over how to leverage a custom certificate store that I could then tell the new 2012 environment to use? I know that it's in there,
I've seen it in the console. The setup is one primary site server with SQL on box and the pki I just mentioned as well as the old 2007 environment that is still live.
I read that you can try and use SAN as a method of identifying the new certs but I haven't found a good document covering exactly how that works. Any info you could provide I would be very grateful for. Thanks.Jason, thank you for your reply. I'm getting the impression that you have never been in the situation where you had to deal with 2 different PKI environments. Let me state that I understand what your saying about trust. We have to configure the trusted root
CA via GPO. That simply isn't enough, and I have a valid example to backup this claim. When the new clients got the advertisement and began the ccmsetup process I used the /pki switch among others. What the client end up doing was selecting a certificate that
had the longest validity period which was issued by our old CA. It checked the authentication chain, found it to be valid and selected it for communication. At that point the installation failed, period, no caveats as you say. The reason the install failed
because the new PKI infrastructure is integrated into the new environment, and the old is not. So when you said " that
are trusted and they can use *any* cert that is trusted because at the end of the day, there is no
difference between two valid certs that have the same purpose as long as they are trusted. "
that is not correct. Both certs are trusted, and use the same certificate template, but only one certificate would allow the install to complete successfully.
Once I started using the CCMCERTISSUERS
switch the client install went swimmingly. The only reason I'm still debating this point is because someone might read this thread see your comments and assume "well I've got my new PKI configured as a trusted root CA, I should be all set" and their
deployment will fail, just as my pilot did.
About Intune I'm looking forward to doing a POC in the lab i built with my Note 3. I'm hoping it goes well as I really want to have our MDM migrated into ConfigMgr... I think the
biggest obstacle outside of selling it to management will be the actual device migration from the current MDM solution. From what I understand of the enrollment process manual install and config is the only path forward.
Thanks Jason for your post and discussion. -
Is it possible to use a sim card from a iphone 4s in a iphone 3gs if so how
I have a sim card that fits inside a iphone 4s but i have a iphone 3gs that i had factory resetted and i would like to activate it so i can use it as an ipod can i put the sim card from the iphone 4s inside of the 3 if so how do i place it in there?
No, it won't work because I think the iPhone 3gs take the full size sim card as far as I can remember and not even a micro sim.
The iPhone 4s has a much smaller sim card, so it just is not going to work.
What you could do is go to your carrier and purchase a Pay As You Go sim card in the correct size to fit a 3gs and put it in to activate the phone to use it as an iPod and then take it out. -
Hi, i need help. When i plug into i tunes with my i phone 4 it changes the e mail account over to my daughters i pod touch account and i can't figure out how to separate the 2. when i click on store, it show up as my account but if i try to update an app or purchase anything it shows on the phone as her email and i need her password to do what i what. it also puts her apps on my phone. any advice would be appreciated. thanks
If you are being prompted for her Apple ID password when updating apps it means that there are one or more apps on your phone that were purchased with her ID. (Apps and their updates are permanently tied to the ID used to purchase them regardless of the settings on your phone.) It's possible that you are inadvertently syncing her apps to your phone. . The only way to stop this is to delete these apps from your phone. You may want to check which apps are checked on the Apps tab of your iTunes sync settings before syncing next time to be sure her apps aren't selected.
To change the Apple ID used for purchasing, go to Settings>Store>Apple ID, tap the ID shown, sign out, sign back in using the ID you want to use. -
I downloaded the latest version of iTunes to Windows XP then connected my first generation iPhone to the different USB ports available on the Dell Dimension 4100, not one of them allowed the iphone to be recognized. The Troubleshooter did not locate drivers other than what are already in the system. Is there a work around? Is it the iphone or Windows XP? Where do I locate drivers? Why can't my devices just get along?
I downloaded the latest version of iTunes to Windows XP then connected my first generation iPhone to the different USB ports available on the Dell Dimension 4100, not one of them allowed the iphone to be recognized. The Troubleshooter did not locate drivers other than what are already in the system. Is there a work around? Is it the iphone or Windows XP? Where do I locate drivers? Why can't my devices just get along?
-
They show up in my iTunes on my computer, but they're absent from my 'purchases' in the iTunes store. This angers me greatly. I do not want to buy them again, that's ridiculous. How do I get them to show up again on my iPod?? Thanks in advance.
Oh wait nevermind I got it. Carry on.- Do you have to right boxes checked in the Tones pane of iTunes for the iPod to get them synced to the iPod:
- Were the tones purchased with the same account as all the other media on the iPod? -
the question is sufficient
The company that make the bioscanner for HP have abandoned it. For more details see https://support.mozilla.com/en-US/questions/799388
-
please refer to above question
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar
Apple will exchange your iPod for a refurbished one for $99 fr a 16 GB 4G. They do not fix yours.
Apple - iPod Repair price
Maybe you are looking for
-
How to Fetch Sales Order Item Quantity from Customer table(ztable)?
Dear Guru's, My scenario: While creating Sales order the item quantity should be fetched from a Ztable. So iam using the Userexit "V46H0001 - - Customer functions for resource-related billing", in that i have implemented my code in the Function Exit
-
BPEL catch all block doesn't catch fault
Hi, I have a catch all block in my BPEL process. One instance tried to write to the Oracle database without success throwing a fault which wasn't taken by BPEL's catch all. I see an error on invoke but it does not go to catch all block. Exception occ
-
How to change the width of PDF report
When i download an interactive report to a PDF. All the columns will have the same width, how to change the width of the column? Thanks, Jen
-
Can iTunes get podcasts at a specified time?
Hi, I have iTunes set to check for podcasts daily, which is OK, but what it really means is check for podcasts 24 hours after the last check. I've been wondering this for a while. Is there a way of talking iTunes into only checking for podcasts at a
-
Hello everyone, I'm attempting to generate Burst sinewave at 1M-1.5Mhz with a specific number of cycles (eg 2-20) with a specified interval (eg 100ms) on a PXI-5402. The vi I created is able to do that task but by using frequency lists. I have just