Is it possible to use a table in the sheet footer in Numbers '09?

Hello there.
I can't find a way to to that. In Pages '09 it is indeed possible and very simplie and intuitive. The very same approach doesn't work for me in Number. Is it possible at all?
Thanks in advance.

You can not place a table in the header/footer in Numbers

Similar Messages

Is it possible to display one table on different sheets?

I'd like to use one table on different sheets.
On these sheets are also other tables, but one should be the same on each sheet.
Is this possible?

You can make one table refer to (take data from) another.
Here is a simple example where I made a table named "Source" and duplicated the table and named is "Destination-1".
the table "Destination-1" refers to table 1 like this:
A1=Source :: A1
copy cell A1 in the table "Destination-1" , then select ALL cells using the menu item "Edit > Select All", then paste
you may now duplicate this table to make additional "copies" as needed. To duplicate a table, select the table, then select the menu iten "Edit > Duplicate"
NOTE: you should be aware that data flows FROM the table "Source" to the destination tables-- NOT the other way.

IS O&G - is it possible to use MPL without activating the ECC- DIMP?

Hi
We are an Oil and Gas industry and activated IS oil and gas in ECC6.0, our requirement is to use functionality such as Master Parts list which is there in ECC-DIMP under configuration control, as some companies within same group where MPL is required .
The question is it possible to use MPL without activating the ECC- DIMP
Request you to please help us to understand.
Regards

Hi Venkat,
If a report is created over a DSO, it pulls data from the active table of a DSO. So as suggested in all the posts above it is not possiable to report on the DSO without activating it.
Activation of DSO only allows to generate SID's to link transaction data and master data, SID's could also be generated at the time of reporting (When the report fetches data from BI server, but for the SID generation data is needed in active table). Also activation checks the correctness of data etc.
Could you please let know why you want to report on the unactive request, is it having some problem with activation?
Regards,
Pankaj

Is it possible to use an iMac as the display for a Mac mini?

Is it possible to use an iMac as the display for a Mac mini?

iMacs late 2009 or newer can be used in Target display
mode. Any older, no can do.
The only other way is via network Screen Sharing or
some otherVPN network like solution. The issue here
though is that video performance will be pretty severely
hampered.

Is it possible to use some product on the unix server at the development level which would make it p

Hello,
We are generating editable PDF forms from the scratch at the development level on the unix server. Is it possible to use some product on the unix server at the development level which would make it possible to save these editable PDF forms to be saved using acrobat reader? These forms are used by the end users and the edited files are then saved... Kindly help me in this regard..
Best Regards,
Deepak

Dear Aandi,
I am really thankful to you for this. I will suggest this to the business and then they can contact adobe for this. Thanking you once again for providing me with all the valueable info. You have been instrumental in helping me out in my project.
Best Regards,
Deepak Goyal

Is it possible to use virtual chars in the aggregation level?

Hello,
Is it possible to use virtual chars in the aggregation level?
thanks

Hi.
See answer of Mr. Gregor Dieckmann in [this topic |BI-IP: Copy planning function from virtual key figure;about virtual KF.
Regards.

Is it possible to use NUMCHARS to display the number of characters in a block of text instead of the whole document? How?

Is it possible to use NUMCHARS to display the number of characters in a block of text instead of the whole document? How?

Getting the character count for a paragraph is trivial:
Sub NumChars1()
MsgBox Selection.Paragraphs(1).Range.Characters.Count
End Sub
Even outputting it to the document is trivial:
Sub NumChars2()
With Selection.Paragraphs(1)
.Range.InsertAfter .Range.Characters.Count
End With
End Sub
The real issue comes when you want to update the document. If the destination paragraph is only ever empty or contains the character count of the previous paragraph, you could use:
Sub NumChars3()
With Selection.Paragraphs(1)
.Next.Range.Text = .Range.Characters.Count & vbCr
End With
End Sub
Cheers
Paul Edstein
[MS MVP - Word]

Is it possible to use 2 displays with the mac mini

is it possible to use 2 displays with the mac mini

I wanted an extended desktop using 2 monitors.
I am using a Dell Ultrasharp ( has 1 VGA and 1 DVI-D) and a LG W2286 (has 2 HDMI, 1 DVI-D and 1 VGA)
I ran into a similar issue where initially the mac would not detect the 2 displays and I thought I would share my solution. I have a Mac Mini 10.8.2 i7 Late 2012.
I bought a "Cable Matters" brand Mini Display Port | Thunderbolt to DVI Male Cable to have dual monitors.
I am also using the included in the box HDMI to DVI-D Adapter from Apple.
Initial configuration was:
Mini-Display (Thunderbolt connector) to DVI connected to the LG DVI-D input.
Apple HDMI to DVI Dongle connected to the Dell DVI-D input.
What happened was that my desktop was on the LG clear as day but OSX did not see the dell monitor.
I called apple support and they could not figure out why the mini cant see the dell monitor. I think I discovered that the mac mini could not support 2 dvi monitors.
I switched the monitor connections.
The connections that works:
HDMI out to HDMI in on the LG using a standard HDMI cable.
Display port | Thunderport to DVI-D on the Dell's DVI-D in.

Is it possible to use PCI-1200 on the DAQ Signal Accessory?

Is it possible to use PCI-1200 on the DAQ Signal Accessory? The documentation for the Daq signal accessory did not mention explicitly whether it
supports the PCI-1200 specifically or not?

Hi,
Yes, you can. According to the manual, the DAQ Signal Accessory is compatible with Lab / 1200 series devices -- this includes the PCI-1200 card.
Regards,
RamziH.

Can it be possible to use SUM twice for the same internal table

Hi Guru,
my requirement is follewing.
I need to use a SUM for the same internal twice.
itab.
first : like SUM will sum up all the value
and second like
if wa_tab-field = ' S'
sum.
...some logic
else if wa_tab-field = h
some logic
endif.
can i use SUM in above way.
Many thanks,
Anuj.

Hi,
yes it could be use multiple time.
Here example.
sort GT_COLLECTHI by atnam ATWRT.
loop at GT_COLLECTHI into gs_collecth.
    at end of ATWRT.
      sum.
      append gs_collecth to gt_collecth.
      clear:gs_collecth.
      sum.
    endat.
    at end of ATNAM.
      sum.
      append gs_collecth to gt_collecth.
      clear:gs_collecth.
      sum.
    endat.
endloop.
Thank you
Jan

Use of tables and style sheet

Hi all,
I am strungling using tables in RoboHelp HTML 7, to generate
webhelp.
What I try to accomplish is using tables in RH, and have its
formatting defined in a style sheet. The html code generated by RH
should be nice and clean. If possible I would not like to go into
the HTML code, I prefer the use of the Design editor.
I have the following in a new file in the RoboHelp table
gallery:
quote:
<table>
<caption>CAPTIONTITLE</caption>
<COL style="width: 5%;">
<COL style="width: 40%;">
<thead>
<tr><th></th><th></th></tr>
</thead>
<tbody>
<tr><td></td><td></td></tr>
<tr><td></td><td></td></tr>
<tr><td></td><td></td></tr>
<tr><td></td><td></td></tr>
</tbody>
</table>
The following is in the CSS file:
quote:
table {
border: 2px #c0c0c0 solid;
border-collapse: collapse;
width: "100%";
margin: 10px;
td, th {
border: 1px #c0c0c0 solid;
padding-left: 5px;
padding-right: 10px;
text-align: left;
vertical-align: top;
th {
background: #ffc000;
When I insert a table into a page, using the table file I
created above, the html looks like:
quote:
<table x-use-null-cells>
<col style="width: 33.333%;">
<col style="width: 33.333%;">
<col style="width: 33.333%;">
<tr><td style="padding-right: 10px; padding-left:
10px;" width=33.333%>
<p> </td>
<td style="padding-right: 10px; padding-left: 10px;"
width=33.333%>
<p> </td>
<td style="padding-right: 10px; padding-left: 10px;"
width=33.333%>
<p> </td></tr>
<tr><td style="padding-right: 10px; padding-left:
10px;" width=33.333%>
<p> </td>
<td style="padding-right: 10px; padding-left: 10px;"
width=33.333%>
<p> </td>
<td style="padding-right: 10px; padding-left: 10px;"
width=33.333%>
<p> </td></tr>
<tr><td style="padding-right: 10px; padding-left:
10px;" width=33.333%>
<p> </td>
<td style="padding-right: 10px; padding-left: 10px;"
width=33.333%>
<p> </td>
<td style="padding-right: 10px; padding-left: 10px;"
width=33.333%>
<p> </td></tr>
</table>
So, RoboHelp adds a number of styles to the inserted table
that overrules the style sheet. That shouldn't be done.
Also, in the RoboHelp editor the table looks different than
in the preview. That shouldn't be a big deal, but something is
missing:
- There's no table caption shown.
- The background in the table header is not colored as I
expected to be.
To eliminate the behavior of RoboHelp with respect to the
table gallery, I created a new page in RoboHelp, and opened the
HTML view. I inserted the following to create a new table.
quote:
<table>
<caption>CAPTIONTITLE</caption>
<COL style="width: 5%;">
<COL style="width: 40%;">
<thead>
<tr><th></th><th></th></tr>
</thead>
<tbody>
<tr><td></td><td></td></tr>
<tr><td></td><td></td></tr>
<tr><td></td><td></td></tr>
<tr><td></td><td></td></tr>
</tbody>
</table>
When switching to Design view and bach to HTML, it has been
converted by RoboHelp to:
quote:
<table x-use-null-cells>
<col style="width: 5%;">
<col style="width: 40%;">
<caption>CAPTIONTITLE</caption>
<tr><th style="width: 5%;" width=5%>
<p> </th>
<th style="width: 40%;" width=40%>
<p> </th></tr>
<tr><td style="width: 5%;" width=5%>
<p> </td>
<td style="width: 40%;" width=40%>
<p> </td></tr>
<tr><td style="width: 5%;" width=5%>
<p> </td>
<td style="width: 40%;" width=40%>
<p> </td></tr>
<tr><td style="width: 5%;" width=5%>
<p> </td>
<td style="width: 40%;" width=40%>
<p> </td></tr>
<tr><td style="width: 5%;" width=5%>
<p> </td>
<td style="width: 40%;" width=40%>
<p> </td></tr>
</table>
That seems ok, there are no styles redefined, other that the
width.
In Design view the table looks different than intended,
however in preview it is as expected. I shows the caption tile, and
the background of the table header, and text alignment is correct
(at the top of each cell).
So, my interpretation is that RoboHelp messes up the nice and
neat html code when using the table gallery, and does not show the
table in Design view as it would like in the Preview.
As a consequence I think I will copy and paste the table code
into the html directly, rather than using the table gallery.
Unless, there's a good solution by using the table gallery.
It would also be nice that the Design view behaves as a
WYSIWYG editor.
Has anyone an idea how I can use tables in RoboHelp as easy
as possible, while keeping the benefits of style sheets?
TIA,
Andre
BTW, my excuses for using quotes rather than attach code, but
it seemed all code was added to the end.

You should avoid locking yourself into a single solution for
anything to do with RH (or any other help authoring tool, for that
matter). Whether dealing with lists, tables, or images (the three
major areas that usually create problems), it's wise to strike a
balance between the features and drawbacks in HTML, CSS, RH, and
web browsers.
Confronted with the issue of changing border colors and table
heading colors earlier this year (and having to do this for the 42
projects in our merged WebHelp project), I simply used
FAR to change the hex numbered
colors in the code, outside of RH (from #808080 to #d8e4f8, for
example). Some freeware products for content replacement are also
available.
If you've used those colors for other things, such as H1/H2,
or other backgrounds, etc., you'll need to identify all table uses
first, and then change only those instances. You could then set up
a batch file to change all border-right-color: #808080;
border-left-color: #808080; etc. all at once
You could also just use the RH Multi-File Find & Replace
if you're only dealing with a few projects, since these table
attributes are likely to always appear as complete on a single line
(the RH feature doesn't handle search and replace strings
interrupted by line breaks and multiple spaces).
All of our tables had been created using Rick's solution via
the Table Gallery, and the background and border colors show up
identically in Design, Preview, and output views. The only use of
the css for our tables is the styling of the actual text that
appears in the cells (TableHead, TableRow, TableSubHead), such as
shown in the attached code below.
BTW, another look at your original post shows that your claim
that "RoboHelp adds a number of styles to the inserted table that
overrules the style sheet," is not quite on the mark. The only
change is that the
"padding-left:" value has been increased from the CSS 5px to
10px. I would guess that you have a 5px indent in either your BODY
or P tag in the CSS, thereby resulting in the value being increased
to the total of 10px.
Good luck,
Leon

Is it possible to have 2 tables with the same name in an Orable database?

Hello,
I'm a complete Oracle newbie so please excuse my question if it's stupid.
I was trying to create 2 tables with the same name using different tablespaces but it does not seem to work. Like this (second time just change the name of the tablespace):
CREATE TABLE test_tbl (
id INTEGER,
status VARCHAR2(10),
last_modified DATE DEFAULT SYSDATE
TABLESPACE tblspc1Is it in general in Oracle possible to acquire this goal?
Thanks a lot!
P.S. I have already created the needed tablespaces
CREATE TABLESPACE tblspc1 DATAFILE 'tblspc1.dbf' SIZE 10MEdited by: 808239 on 02-Mar-2011 02:18

It is not possible to create two tables with same name in same schema.
A user can own one schema with his own name and another with the schema name SYS.
For this you have to grant sysdba privilage to the user and then have to connect using sys password or with the password specified in password file.
But this still you have to access to the table in sys schema using sys.table_name.
Hope Answered tthe Question.

How to use nested tables with the inner table in a separate row

Hi,
I am having a problem when changing our existing Adobe printform delivery note so that serial numbers are written for each item line.
I've searched the forum and found many posts relating to nested tables, but none that had exactly my situation.
Currently I print item lines like this (this uses the complete width of the form):
Pos....Quantity...Material..........Description..................................................Date
99.........99.........ABCDEFGH....alksdalksjdlkasjdlsajdlkjasldjaslkdjakslj........9999.99.99
.................................................fskdjflsdfljsdflkjsdlkfjsdlkjfdfsf
.................................................asdkadsfdkfhsdkfhskjdfhks
but I want to add serial numbers after that for each item like this:
Pos....Quantity...Material..........Description...................................................Date
99.........99.........ABCDEFGH....alksdalksjdlkasjdlsajdlkjasldjaslkdjakslj.........9999.99.99
.................................................fskdjflsdfljsdflkjsdlkfjsdlkjfdfsf
.................................................asdkadsfdkfhsdkfhskjdfhks
.................................................Serial numbers:
.................................................9999999999..9999999999..9999999999
.................................................9999999999..9999999999..9999999999
I have added serial numbers to my the current table in the interface/context/data view so it look like this:
TTYP - ITEM_FIELDS
...DATA structure
......POSNR
......QTY
......MATNR
......TTYP - ITEM_TEXTS
.........DATA structure
............DESCRIPTION
......DATE
......TTYP - SERIAL_NOS
.........DATA structure
............SERIAL_COL1
............SERIAL_COL2
............SERIAL_COL3
In my Hierarchy I currently have this hierarchy and binding:
Table - ITEM_FIELDS
...Body Row - DATA
......Cell - POSNR
......Cell - QTY
......Cell - MATNR
......Subform - ItemTexts
.........Table - ITEM_TEXTS
............Body Row - DATA
...............Cell - DESCRIPTION
......Cell - DATE
Now I am trying to add the SERIAL_NOS table into the ITEM_FIELDS/DATA body row right after the DATE cell - but I am not allowed to drag anything into the table structure.
Does anybody have an ida how I can achieve this, please?
Kind regards,
Claus Christensen

HI,
Set the body page as flowed and set the tables also flowed.
go to bodypage>object->subform-->select flowed option.
I thihnk this will work..if u are getting all the records properly into the tables 1 and 2.
Thanks,
Mahdukar

Using ALV table inside the WD CHIP

Hi,
I am trying to display the internal table values using alv component in WD CHIP. But, not able to add the component usage as SALV_WD_TABLE.
Can anyone please confirm how can we use the ALV component inside the WD chip.
My requirement is that based upon the selection parameter provided by the user in the CHIP, i need to display the resource id in a table in the same CHIP.
Thanks,
Jayaprakash

Hi Kabil,
You mean in WD CHIP. It seems that it is behaving differently when working with CHIP.
It is not allowing me to add other components like SALV_WD_TABLE.
Thanks,Prabu

(Urgent) issue of Using Aggregate table in the BMM layer (Thanks)

Hi,
Let's say, I have 2 fact tables, "F_Region_Goal" and "F_Store_Goal"; and 2 dimension tables, "Dim_Date" and "Dim_Store_info".
"Dim_Date" has hierarchy as "day-month-year" and "Dim_Store_info" has hierarchy as "Division-Region-Store".
"F_Store_Goal" has the most detailed goal info data in it;
"F_Region_Goal" aggregate all the goal on "Region" level. (For Data dimension point of view, these 2 Fact tables are the same, "day-month-year")
We create the BM, I have set the "Logic level" info in LTS, to let BIEE server to point to "Region_Goal" when we choose the Level: Region.
However, i have tried several times, in the log, it always goes to "F_Store_Goal".
Can anyone here tell me what I missed in the configuration?
You help will be greatly appreciated.
BTW: What if I want the BIEE server go to "F_Region_Goal" to do SUM() function to get the Goal for "Division" level, when I choose the criteria "Division" and "Month", How can i realize this ?
Many many thanks for any reply.

It seems to me that you are missing the aggregate dimension "Dim_Region_info" ... currently you are trying to get obiee to use a lower level dimension with a higher level fact and it's designed to take what it believes is the most effiicient way to do things.

Is it possible to use a table in the sheet footer in Numbers '09?

Similar Messages

Maybe you are looking for