Is it possible to use a tax code in FB60 but which does not post any tax?

Hello Gurus,
Can you advise if it is possible to configure a tax code which can be selected in FB60. But we want this tax code not to post any tax value in SAP but simply to be allowed to be selected and populated in the doucment. In FTXP a tax code can be setup that does not need to have a tax rate % maintained against it or be linked to a GL account. However, this tax code cannot then be used in FB60 as the system asks that a rate is maintained and then that an account must be maintained.
Can you advise if it is possible to maintain a tax code in such a way that it can be selected in FB60 but does not result in any tax posting to any tax account? We want it so that no value is posted, so even a 0% rate would not be good.
Thanks for any ideas on this.
Mart

If you set up 0% tax code, system will NOT post any entry to GL account. You can use the tax code in FB60 & MIRO & PO too.
thanx

Similar Messages

  • Actually i use the mini-jack to cinch connection to stream music to my stereo.  is there a possibility to use the digital output?  my sterea amply does not have a digital imput.

    actually i use the mini-jack to cinch connection to stream music to my stereo.  is there a possibility to use the digital output?  my stereo amp does not have a digital imput.  are there good converters available?

    By default, your AirPort Express is using an internal DAC to convert the digital audio stream to analog when you connect an analog audio cable to it audio output port. You can; however, connect an external DAC to the same port using a optical digital cable and let the external DAC do the conversion for your stereo.

  • Hello, the 'Save As' dialog box used to allow the backspace button to go up one level in the directory when the focus is in the folder contents box but it does not work any more, please help.

    Hello, the 'Save As' dialog box used to allow the backspace button to go up one level in the directory when the focus is in the folder contents box but it does not work any more, please help. BTW the same 'Save As' dialog in other applications still allow the backspace button to go up one level in the directory.

    cor-el,
    I kept forgetting and procrastinating about following your instructions, since I have internet access only for limited amounts of time and usually I am busy with important tasks when I am.
    Out of the blue, the problem corrected itself (the Save As box started to open full screen, then shrunk down to a normal size and the edges can now be dragged to a custom size).
    Even the copy and paste problem in the filenaming area seems to have been less troublesome lately even though there have been no updates to Firefox in a few weeks.
    Even though I marked the solution as not helpful, the problem has in fact been resolved. I will save the solution instructions in case the issue returns.

  • Hello, i am trying to download the new ios 8 but my usage says i am using 3.1 gb in messages but i do not have any imessages saved?? anybody know how to fix this.

    hello, i am trying to download the new ios 8 but my usage says i am using 3.1 gb in messages but i do not have any imessages saved?? anybody know how to fix this.

    Given that you are very low in memory on your iPhone, it would be much easier to connect your phone to your computer and download iOS 8.1 via iTunes.  Memory won't be an issue this way.

  • I have iPhone 6,  8.3. I cannot use bluetooth at all from my device, even to connect my macbook pro. I did all the recommended trouble shooting such as  reboot and reset network settings. but it does not recognise any bluetooth device. Pls help.Thank

    I have iPhone 6,  8.3. I cannot use bluetooth at all from my device, even to connect my macbook pro. I did all the recommended trouble shooting such as  reboot and reset network settings. but it does not recognise any bluetooth device. Pls help.Thank you.

    See iPhone BT profile on what can be connected/paired:
    iOS: Supported Bluetooth profiles - Apple Support
    And BT troubleshooting:
    iOS: Troubleshooting Bluetooth connections - Apple Support

  • TS1398 my ipod touch won't connect to my wi-fi which is locked,i've tried using the password on the router but it does not accept it,ive phoned talk talk,,,,let's not go there!!!!1

    my ipod touch will not connect to my home wi-fi internet which is locked,i've tried using the password on the router but it does not accept it.
    i phoned talk talk for advice but unfortunately i would have been as well asking an axe weilding monkey high on cocaine...
    appreciate any advice...
    thanks.
    martin.

    thanks for getting back so quickly.when i put  password into ipod it comes up with message
    "unable to join network"
    the router is using AES incription.
    my wi-fi is a secured connection WPA2,
    i believe i should have WEP or WAP connection for it to work?
    i have set up my daughters nintendo 3ds lite to internet no problem using existing connection.
    talktalk said they do not support apple ipod touch sytem?
    very confusing,particulary as i've bought 3 ipod touch ,,,,mmmmmmm!
    thanks again..

  • Hi, I am trying to blur the background in Prem Pro CC I have made a mask using the free draw bezier tool but it does not track forward.  What am I doing wrong?

    Hi, I am trying to blur the background in Prem Pro CC I have made a mask using the free draw bezier tool but it does not track forward.  What am I doing wrong?

    Hi Kevin
    I found a YouTube clip explaining how to blur the background with free draw bezier tool and it also said to invert the mask, but it still does not track forward. I really hope there is a solution.
    Steph

  • I want to use my original iphone as an ipod touch but it does not see any wifi

    For a long time, my iphone would see my home network intermittently, but it would always drop the signal. I have been searching the web to try to find a way to resolve this issue. Recently the wifi connectivity seems to have gone completely out.
    I just want to allow my kids to use it as an ipod touch.

    I actually performed a complete restore on the phone, but it did not work.  I then took the phone in to the Apple genius bar, and they diagnosed it to have damaged wifi hardware. Thank you all for your suggestions.

  • I use "firefox -new-tab anyPage.html" but it does not open it in new tab. Instead it replaces the last active tab.

    Well I use following command to view offline pages using firefox on my linux box
    $ firefox -new-tab anyPage.html
    But instead of opening it in new tab, it replaces the last active tab.
    I have tired
    $ firefox -new-tab anyPage.html &
    $ firefox -remote "openurl(anyPage.html,NEW_TAB)"
    But none works.
    Sometimes it do open in new tab but mostly it does not. I have been unable to figure out any pattern.
    == This happened ==
    Every time Firefox opened

    (''Note: cross posted from [https://support.mozilla.com/nl/questions/801471 here].'')
    I had the same problem, but was able to fix it somewhat.
    # Open the about:config page.
    # Set the ''browser.link.open_newwindow.restriction'' setting to 0 (= zero).
    On my machine this will open new windows in a new tab. However, it switches to the new tab regardless of the setting ''"When I open a link in new tab, switch to it immediatly"''.

  • Match code in report selection screen does not show any values for 0FISCPER

    Hi Experts,
    I have problem with selection screen in several reports. When I use match code for fiscal period selection I get only # as a possible value. I have checked the master data they seem to be correct. I work with 7.0 BW system. Can you please give me any hint what I should check?
    Thank you,
    Michal

    Hi,
    maybe I ask different way - how do you add characteristic values for a characteristic in the BEx? Is it automated somehow in SAP (e.g. from master data)? For the fiscal period I use custommer exit to fill in the default value, which is the current fiscal period. But this is something different, right?
    <removed by moderator>
    Michal
    Edited by: Arun Varadarajan on Nov 14, 2008 3:55 PM

  • Try to use Headset for Skype on G5, but microphone does not work! Need help

    I recently installed skype on my G5, bought a headset, can hear people talking to me, but nobody can hear me. It's not an USB or bluetooth headset, but with 2 plugins (sorry, i'm austrian...).
    Does anybody know what setups to change that it works?
    I try the system configuration and set up line in and line out...
    Pleas help!

    I have used a headset with the 2 connections. In order to connect I use the Griffin iMic as my adapter. Every once in awhile I get the 2 plugs in backwards and have to switch them.
    http://www.griffintechnology.com/products/imic/
    The other thing I have had happen is that my machine seems to auto mute when I switch things around. Sometimes I have had to go in to the System or program preferences to change the settings. For some reason the system has muted me or the program I am using did not keep the previous settings due to having the headset unplugged/replugged etc.
    Message was edited by: Casey

  • Using java API (dns_sd.jar) in Windows XP does not discover any service

    Hi,
    I have a bonjour discoverable service running on an Ipad and used the DNSSD.resolve java API to discover the service. I installed bonjour for windows and set the class path to take the dns_sd.jar file. I verified that the dnsResponder service is running... However, I am not able to discover the service. I have the same program running on a Mac and there is able to discover the service all the times. I hope someone has experienced the same problem and have a suggestion/solution to post. Thanks in advance.
    --Beto

    Are you doing any JNI or native calls during start-up? That's my quess.
    If you are, must be calling win2000 functions.

  • My network drives crashed and I was able to restore one with the exact same name and login.  The second one I also created using the same name and login but it does not find the files when I click.

    I get Connection failed when I click on the photo in IPhoto. This window keeps popping up and I have to force quit IPhoto.

    iPhoto tracks referenced files using Aliases and this works just fine when the Library and the photos are on the same volume. However, Aliases won't survive being moved from one volume to another. This is why experienced users on here recommend against using Referenced Libraries in general, and in particular when the library and files are on different volumes.
    Try repair the aliases with an app like FileBuddy If that fails then I'm afraid you'll  need to do it manually for every photo in the Library, unfortunately.
    Regards
    TD

  • I am using calendar to estimate travel time but it does not recall my last location.

    This is a strange one.  I have an iCal event that clearly states where I am and maps it.  Yet the next event that has a location measure the travel time and path form my Boston home location although I am in NY with  prior meeting that shoudl overide my home location.  What am I doing wrong?
    Thansk for the help.

    Hi thierryhubert,
    If the Travel Time function in Calendar isn't calculating based on your current location, you may want to make sure that Location Services is enabled. You may find the following article helpful:
    OS X Mavericks: Manage which apps can use Location Services
    http://support.apple.com/kb/PH14318
    Regards,
    - Brenden

  • A Website I use requires adobe flash plug in but iPad does not support this, canyou provide a solution?

    A website I use requires adobe Flash plug-in. In trying to download this it states It is not supported by the device. Can you please suggest a solution?

    Use different hardware that supports Flash instead of the iPad that doesn't.
    Allan

Maybe you are looking for