Is it possible to use escalation/deadline in WS12300111?

Hi all,
We are in ECC 6.0 and I would like to know if there is any technical limitation that prevents one to implement the 'text book' deadline/escalation (modelled)?.
I have copied standard workflow WS12300111 as well as task TS12300097.
Is it possible to implement escalation/deadline (i.e. using tabs Latest End / Requested End) as we usually do?
I am having some issues and I am not sure if it is a limitation of this particular task?
The deadline/escalation triggers without issue and sends the required emails. However, when the Manager logs on via UWL to approve the work item, and gets to the final screen to Approve Request, I get the error message that "Work Item 00000007348 cannot be executed in status COMPLETED". The message refers to the id of the step that sends the email to the Manager.
In the workflow log I can see that the work item for approval is not completed yet.
The workflow log shows me that the approval step has not been 'completed' yet - however, the message is complaining about work item id 7348!!
In the ERP Employee Self Service Forum I found a thread (Leave Request Auto Approval) that mentions that
"deadline monitoring is not yet supported for this leave request WF ie ws12300111" and "if you want this feature then you have to make the changes in workflow related exits when the work item staus is getting changed etc etc"
I would like to know if someone has successfuly implemented deadline/escalation for the WS12300111? And if yes, how did you do it?
I didn't quite understand what sort of changes might be required in order to be able to implement deadline/escalation i.e. what sort of exits needs to be changed, how to do it, etc.
Can anyone please help?
Many thanks in advance for any further help you provide!
Cristiana
Edited by: Cristiana d'Agosto on Jun 11, 2008 4:31 AM
OSS Note 1066288 solved the problem

Hmmm, that's strange - just checked again and it is 1066288.
Note 1066288 - ESS LEA:Workitem XXXX cannot be executed in status COMPLETED
Perhaps you can't see it because it is a "Pilot Release"?
Release Status: Pilot Release
Released on: 26.02.2008  04:54:32
Priority: Correction with high priority
Category: Program error
Primary Component: PT-RC-UI-XS Self Services Web Dynpro

Similar Messages

  • Is it possible to use wildcards to match cell contents in an if statement?

    I need to return a ID along with some other information on a page by page basis, so that the information comes out linked by position.  I use a couple of loops and if statements to navigate through the document.  I am able to use exact matches of cell contents which is fine when the contents doesn't vary.  But the IDs, though they have a similar pattern, are all different. In a menu driven search, I am able to find what I need with '150^9^9^9^9^9-^9^9^9' But when I try putting this (or any number of [0-9], *, ? combinations) it fails.  Is it possible to use wildcards?  The symbol used for the match (==) makes me suspect that it is not possible and that only literal, exact matches will work.  But I wanted to check with the experts before giving up.
    Thanks
    pcbaz

    Thanks for the input.  You're right, a GREP search is much more efficient.  But what I'm trying to do and the circumstances here don't allow me, I think,  to go that route. I am trying to generate a list of values coming from several textframes on a single page and have them come out so that I can tell which values belong together.
    I'm using an inherited document with masters that were created 'manually';  the index numbering for textframes and tables is random. I navigate through the pages, looping through textframe indices asking ' does this textframe exist?' If so, I ask if it is a table -- if no, it is a simple textframe and I ask about the ID, if yes, I ask if the contents of cell (0,0) (invariant position and contents) are equal to the table I want..  I am sending the ID and other pieces of information from the table to one row of a new table on a new page.  So the ID and other information from a single page are linked by being in the same row.
    I know this a little 'off-normal' -- I'm using the search to navigate through the document and find things by location the way you do with a spreadsheet.  I have devised a work-around that helps me get around the fact that the ID is not invariant.  I create a list of the (exact) IDs from another document, equating them to a variable ('a').  I then loop through the list of IDs and ask if the contents of the textframe is equal to 'a'..This works o.k, unless there happens to be an extra space, a different kind of hyphen, etc. It would be so much easier if I could use the wildcards that work in a menu-driven text or GREP search in script just to ask about the contents of the textframe.
    Thanks again
    pcbaz (Peter BIerly)
    P.S. we have since rewritten the masters so this problem will not exist in the future -- we now know exactly which textframe and/or table indices to refer to to get any particular bits of information and don't need to ask questions about the contents.

  • Is it possible to use a cable with two headphone jacks on either end and an electric guitar adapter to record in Garageband?

    Hey everyone,
    I got my Macbook Air (Mid 2013 model) last month and I want to record my acoustic-electric guitar on Garageband (which came with the Air). 
    I don't want to buy a guitar that has a USB. I have a cable with a 3.5 mm headphone jack on both ends like the one pictured here on this website http://www.bestdealaz.com/item.php?id=628 (i didn't buy it from this site though).
    I connected a 6.3 mm guitar adapter (http://www.ebay.com/bhp/headphone-guitar-adapter) to this cable. Then I connected one end of the cable to my guitar and the other end to the Headphone/Microphone jack on the left side of the MBA.
    I saw how other people were saying to go to System Preferences / Sound and then change audio output to audio input.
    I can't do that. I tried.
    Please help!
    Thank you.

    Hello Massimo Pascucci,
    The issue that you are facing when creating an endpoint with internal loadbalancer is the limitation of not allowing same ports to be listening under a single cloud service. This reason for this is that there is a limitation of only one private IP (Also
    known as the Internal load balanced IP) per cloud service.
    There is also a limitation on the Internal load balancer more than one port to be published per load balancer:
    You can leave your feedback by following the link below:
    https://social.msdn.microsoft.com/Forums/en-US/1805c5a0-3906-4cd6-8561-9802d77e0ae5/is-it-possible-to-use-both-an-ilb-and-an-elb-listening-on-the-same-port-in-the-same-azure-cloud?forum=WAVirtualMachinesVirtualNetwork
    Refer to this article for more information on Internal load balancer:
    http://azure.microsoft.com/blog/2014/05/20/internal-load-balancing/
    Thanks,
    Syed Irfan Hussain

  • I am using a mac mini 2011 an 3gs i phone 2010 macbook white 2008 and a new 2013 apple tv box. When i check info on the cloud I get 'upgrade your operating system to the latest. My question is is it possible to use the icloud system without an upgrade

    I am using a mac mini 2011 an 3gs i phone 2010 macbook white 2008 and a new 2013 apple tv box. When i check info on the cloud I get 'upgrade your operating system to the latest. My question is is it possible to use the icloud system without an upgrade

    iCloud requires OS X 10.7.2.

  • Is it possible to use my ipad 4 as a second monitor through a USB connection.

    Is it possible to use my ipad 4 as a second monitor through a USB connection.

    perhaps, but my information was current. I had the same question and was looking for and answer and found it. So I responded in order to help others who found this question and were looking for an answer. This community is made more helpful and kept current by adding new answers with current information.
    imobl... air display was a valid response for 2011 predating the question. Also using Monitor2go was valid in 2012. There were USB mirroring and as a 2nd display for an iPad options at the time the original question was asked.

  • Is it possible to use old Apple Flat Panel Display (62 watt power adapter) with MacBookPro 13" Mid-2012 running 10.8.4? Tried mini display to VGA cable

    Is it possible to use old Apple Flat Panel Display (62 watt power adapter) with a MacBookPro 13" Mid-2012 laptop?  Would like to use larger screen when working at home.  I have a mini display port to VGA cable and have tried to hook up the old display but it seems not to work.  When I try to activate the screen on the old display-- a window comes up in the MacBookPro and asks me if I want to shut down the computer.  What little I have read it that the MacBookPro had Thunderbolt and the old display may not be compatible?  Any assistance would be appreciated.

    quax88 wrote:
    11.09.12 22:16:06,148 ClamXavSentry[286]: scan email files
    11.09.12 22:16:06,148 ClamXavSentry[286]: I will quarantine infected files
    This doesn't have anything to do with your problem, but it will likely cause other issues with your e-mail.
    Here's my standard recommendation concerting the use of A-V software to deal with potentially infected messages:
    Never use ClamXav (or any other A-V software) to move (quarantine) or delete e-mail. It will corrupt the mailbox index which could cause loss of other e-mail and other issues with functions such as searching. It may also leave the original e-mail on your ISP's e-mail server and will be re-downloaded to your hard drive the next time you check for new mail.
    So, if you choose to "Scan e-mail content for malware and phishing" in the General Preferences, make sure you do not elect to either Quarantine or Delete infected files.
    When possibly infected e-mail files are found:
    Right-click/Control-click on either the infection or file name in the ClamXav window.
    Select "Reveal In Finder" from the pop-up menu.
    When the window opens, double-click on the file to open the message in your e-mail client application.
    Read the message and if you agree that it is junk/spam/phishing then use the e-mail client's delete button to delete it (this is especially important when the word "Heuristics" appears in the infection name).
    If you disagree and choose to retain the message, return to ClamXav and choose "Exclude From Future Scans" from the pop-up menu.
    If this is a g-mail account and those messages continue to show up after you have deleted them in the above manner, you may need to log in to webmail using your browser, go to the "All Mail" folder, find the message(s) and use the delete button there to permanently delete them from the server.
    To fix the corrupted mailbox index(es), highlight each one that was corrupted and choose Rebuild from the appropriate menu.

  • Is it possible to use backup files previously copied to an external hard drive to backup an iPhone?

    My sister froze her iPhone by trying to turn it off during a software update (not sure why) and restored it because she thought it would fix it. Unfortunately she unintentionally deleted all of her data and settings. She doesn't use iCloud, so I'm assuming all her files are backed up to her computer when she syncs her iPhone, but using iTunes I can only find two backup points using Edit>Preferences>Devices, both in the past few minutes. I know that each sync overrides the last backup files instead of creating newer ones, so apparently older backup files from her computer can't be used to recover her data. However, we both periodically use an external hard drive to back up our computers by basically dragging and dropping our files onto it, so there is an earlier version of her User folder on the external hard drive. It would definitely be preferable to use the backup files from a few months ago that are on the external hard drive and lose a few photos than to lose years of data, so would it be possible to direct iTunes to those backup files (AppData etc) instead of the ones saved on her computer hard drive? There's not any kind of browse option I can see that could allow me to get iTunes to search for backup files on the external hard drive and I'm not computer savvy enough to manually find the files and connect them to iTunes. Is it even possible to use backup files from an external hard drive? Do I have to replace the ones that exist on her computer now?

    Garageband can't use VST plugins.
    If you're talking about AUs: you could try to put an alias into the HD/Library/Audio/Plug-Ins/Components folder instead of the actual files, and see if GB loads them.

  • Is it possible to use both an ILB and an ELB (listening on the same port) in the same Azure cloud service?

    I'm building a test Lync deployment on Azure; yes, I know this is not supported, hence "test".
    Lync Front-End servers expose two set of web services, one for internal users and one for external ones; they listen on different ports (443 and 4443) on the same servers; when external services are published, you need a reverse proxy or a port forwarding
    in order to map port 443 of a public IP address to port 4443 of the Front-End server(s). When you have multiple Front-End servers in a pool, you also need to load-balance them.
    So, a typical Lync deployment looks like this:
           Internal users
                     |
                   443
                      |
              Internal LB
            192.168.0.20
            443         443
              |               |
       Lync FE 1     Lync FE 2
    192.168.0.21 192.168.0.22
              |               |
          4443        4443
              External LB
           Public IP Address
                     |
                  443
                     |
           External Users
    This should be easily replicated in Azure, as it supports both external load balancing and internal load balancing. They are even supported together in the same cloud service, so this configuration should be easy. However, it looks like "should"
    is the keyword here.
    After creating the external load balanced endpoint (which listens on external port 443 and forwards to port 4443 on the servers), I'm trying to create an internal load balancer and add internal endpoints to is; however, while the ILB can be created successfully,
    adding an internal endpoint listening on port 443 and forwarding to port 443 on the servers fails miserably, with an error stating that port 443 is already in use by another endpoint:
    Update-AzureVM : BadRequest : Port 443 is already in use by one of the endpoints in this deployment. Ensure that the port numbers are unique across endpoints within a deployment.
    For reference, my commands are:
    Add-AzureInternalLoadBalancer -InternalLoadBalancerName "LyncILB" -ServiceName "LyncFrontEnd" -SubnetName "LabSubnet" -StaticVNetIPAddress 192.168.0.20
    (This completes successfully)
    Get-AzureVM LYNCFE1 | Add-AzureEndpoint -Name "Https-Int" -Protocol "tcp" -LocalPort 443 -PublicPort 443 -LBSetName "HttpsIntLB" -DefaultProbe -InternalLoadBalancerName "LyncILB"
    (This fails)
    The existing external endpoint is configured as such:
    Get-AzureVM LYNCFE1 | get-azureendpoint
    LBSetName : HttpsExtLB
    LocalPort : 4443
    Name : HTTPS-Ext
    Port : 443
    Protocol : tcp
    Vip :
    ProbePath :
    ProbePort : 4443
    ProbeProtocol : tcp
    ProbeIntervalInSeconds : 15
    ProbeTimeoutInSeconds : 31
    EnableDirectServerReturn : False
    Acl : {}
    InternalLoadBalancerName :
    IdleTimeoutInMinutes :
    LoadBalancerDistribution :
    The error doesn't even make a lot of sense; the external load balancer listens on a public IP address, while the internal load balancer listens on a private IP address in the internal network; there
    shouldn't be any conflict here... however it looks like there is one instead.
    Why doesn't this work? Am I doing something wrong, or is Azure networking just being silly as usual again?

    Hello Massimo Pascucci,
    The issue that you are facing when creating an endpoint with internal loadbalancer is the limitation of not allowing same ports to be listening under a single cloud service. This reason for this is that there is a limitation of only one private IP (Also
    known as the Internal load balanced IP) per cloud service.
    There is also a limitation on the Internal load balancer more than one port to be published per load balancer:
    You can leave your feedback by following the link below:
    https://social.msdn.microsoft.com/Forums/en-US/1805c5a0-3906-4cd6-8561-9802d77e0ae5/is-it-possible-to-use-both-an-ilb-and-an-elb-listening-on-the-same-port-in-the-same-azure-cloud?forum=WAVirtualMachinesVirtualNetwork
    Refer to this article for more information on Internal load balancer:
    http://azure.microsoft.com/blog/2014/05/20/internal-load-balancing/
    Thanks,
    Syed Irfan Hussain

  • Is it possible to use my music files in both my girlfriend's and my separate Itunes libraries through our seperate user accounts?? I want to import my music into her library with out copying the files onto my hard drive a second time....

    Is it possible to use my music files in both my girlfriend's and my Itunes library's through our seperate user account?  I want to import my music into her library without copying to my hard drive a second time.....

    Would any of these help you?:
    http://www.apple.com/itunes/inside-itunes/2011/05/two-ways-to-share-media-librar ies-through-itunes.html
    http://www.apple.com/itunes/inside-itunes/2011/01/keeping-multiple-itunes-librar ies-on-a-single-computerif-you-share-your-computer-with-others-and-you.html

  • HT1420 Possibility to use 1 Computer - configured with 2 user accounts - each account uses a different Apple-ID for iTunes authorization ?

    I wonder if it is possible to use 1 Computer (Macbook Pro)
    - configured with 2 (ore even more) user accounts (i.e. me + my kid)
    - and each user account has a different Apple-ID (account) for iTunes purchases & iTunes authorization ?
    I woud think that is fine in terms of the underlying license agreement refereing to re-download purchased movies, shows, apps, etc.
    However, it seams that there is that miraculous 90 days restriction, which I don't understand, and which allows me only to "authorise" the Computer under one or the other account. The switch is unfortunatelly only possible every 90 days ?!?
    Thanks anybody for help
    Oliver

    The 90 day association doesn't stop you authorising an account, it only stops you from using another account for iTunes Match or automatic downloads or redownloading its past purchases : http://support.apple.com/kb/HT4627
    There are a few methods listed on this page for how you could do it e.g. multiple user acounts, same iTunes but you having separate playlists, separate iTunes libraries : http://support.apple.com/kb/HT1495

  • Is it possible to use the old iMac 2010 21inch as an external monitor for my 15inch Macbook retina?

    Is it possible to use the old iMac 2010 21inch as an external monitor for my 15inch Macbook retina? E.g. Using a mini-display cable to connect from the imac mini display port to thunderbolt port on my macbook.

    Apple shows only the 27" version supporting Target Display Mode.
    <http://support.apple.com/kb/HT3924>

  • Is it possible to use creative cloud online with both Mac/windows system (on the same computer, bootcamp) without paying twice ?

    Hello, I work with a Macbook pro, divided into mac and win 8 (with Bootcamp), is it possible to use Creative Cloud subscription with both system without paying twice.
    Bonjour, J'utilise un Macbook pro partitionné Bootcamp mac et windows 8, est-il possible que l'abonnement à Creative Cloud en ligne fonctionne indifféremment dans les deux systemes (sur le même ordi), sans payer deux fois.
    Merci,
    jho

    Your subscription allows for two functioning installations (normally on separate machines, but I imagine you could install the two as you indicate).

  • TS2972 is it possible to use home sharing between two users on the same computer?

    My wife and I have itunes accounts and want to be able to share music we have each bought on our accounts. We have tried setting up the home sharing on our PC but it doesn't show up on the screen. Can anyone please help?

    "Is it possible to use home sharing between two users on the same computer?"
    No. Home sharing is used to connect two running instances of iTunes across a network. When you switch users on the computer all applications running on the other profile are suspended.
    You can however share your respective media folders so that they are visible in either profile and then copy over any content that you want, or you could create a single joint library which you use when either user is logged in.
    tt2

  • Using exchange2003 on iPad and iPhone. Is it possible to use agenda on iMac via the cloud?

    I am using exchange2003 on iPad and iPhone. Is it possible to use same agenda and contacts on iMac 10.7.2?

    Hi jeris529,
    As Niel has suggested, you should not use a non standard disk in your slot loading iMac.
    Further information about disk compatibility or usage can be found in the Apple Knowledge Base Article "Using nonstandard discs in optical drives".
    hope that helps some,
    littleshoulders

  • Is it possible to use the Apple wireless keyboard with the iPhone 6? Will the Magic Mouse work with iMovie on iPhone6 Plus?

    iPhone 6 page says that iMovie is a (free) application available for iPhone 6. When I use it on the desktop I need a mouse. Should I expect all controls to be touch-sensitive, or is it possible to use the wireless Magic Mouse? Similarly, if I want to type an email or a long document, is it possible to use the Mac wireless keyboard to enter text? With the iPhone 6 Plus taking over for laptops (phablet), it seems to me that input tools are relevant. Maybe what I'm asking is whether the iPhone6 (OS8) has drivers for these devices. Please advise.

    Apps that are designed for iOS devices such as the iOS version of iMovie are intended to be used entirely by touch. It's worth noting that iMovie for iOS is not absolutely identical to iMovie for Mac OS.

Maybe you are looking for

  • Photoshop CS4 sudden lag after installing tablet driver

    Hi.. So my PS CS4 had never lagged before, it was all running perfectly, all functions are going quickly. I was using the newest driver for wacom intuos 3, but with using a new driver, I had a weird pressure problem. It would only work with an older

  • Does lightroom have photo merge or do you need full photoshop?

    does lightroom have photo merge or do you need full photoshop?

  • Paste in textarea using Safari on iPad

    In Safari on the iPad I can cut, copy and paste on the url address field and on the Google search field. In a text field (element textarea in html) I can cut and copy but I CANNOT PASTE. Any suggestions? Thank you. Hubert

  • Auto-starting apps in Awesome3

    Hi! I've been using Awesome3 for a while now. Until now I have been autostarting apps (conky, thunderbird etc) in my rc.lua file. But recently I found out that many people use their .xinitrc file to autostart things. Just wondering, what do you guys

  • Intel Trusted Execution Engine Interface has a Code 10 error.

    When I open Device Manager I get a yellow triangle on the Intel Trusted Execution Engine Interface. I open it and it says  This device cannot start. (Code 10) STATUS_DEVICE_POWER_FAILURE. I have tried uninstalling it and updated all drivers. I don't