Is it posssible to install two RACs with different version on one IBM HACMP

The version of HACMP is 5.4. The version of Oracle database can be 9i or 10g, or both are 10g.
thansk a lot

Hi,
We have an oracle 10g database configured with RAC. We also have an oracle 9i that is not configured with RAC. You mean that if I want to install another RAC on the HACMP, I need upgrade to 10g. Rigth?What i understand from your above point is : you want to configure your 9i database with IBM HACMP cluster, if its so then u need not have to upgrade to 10g or RAC i can straight away finish this task.
Contact your HACMP vendor for steup and technical documents for settingup HACMP on 9i database.
I think your doubt is now cleared.
Regards,
X A H E E R

Similar Messages

  • Can I backup two devices (with different documents) to one iCloud account?  For example: iPad and iPhone, not everything is synced between the two, but I would like to backup each (seperately in the cloud), is this possible?

    Hello Apple Community,
    Can I backup two devices (with different documents) to one iCloud account? 
    For example: iPad Air and iPhone 5, not everything is synced between the two, but I would like to backup each (seperately in the cloud).  Is this possible?
    This way when I change from an old ipad to a new, I can restore with the ipad backup, and when I change from an old iphone to a new, I can restore from the
    iphone backup.
    Thank you in advance!

    Terminology check here. Do you really mean a "CD"?  There's a difference in Cloud behavior between content from a physical CD you ripped (which only has Cloud content if you have iTunes Match) and an "album" you bought from the iTunes Store.
    Read references for Home Sharing.
    iTunes: How to share music and video - http://support.apple.com/kb/HT2688 - about Music Sharing and Home Sharing
    Home Sharing Support page - http://www.apple.com/support/homesharing/
    iOS: Setting up Home Sharing on your device - http://support.apple.com/kb/ht4557 - "With Home Sharing in iOS 4.3 or later, you can stream your entire iTunes library over your home Wi-Fi network from your Mac or PC right to your iPhone, iPad, or iPod touch."
    The above can get pretty complicated.  You are probably best off by syncing both devices to a single library and/or updating the libraries on both computers to have the same content.

  • Two phones with different contacts and one computer?

    how do i go about syncing two phones, with different contacts, to one computer?

    If you are using Microsoft Outlook and syncing different contacts is your concern, you can set up a new Contacts folder for your iPhone (like "Jeff's Contacts") and set iTunes to sync that folder only to your iPhone. Create a second new Contacts folder for the other iPhone's contacts and do the same thing. Works great for my iPhone and my wife's iPhone, both synced to our home computer.

  • Two ROIs with different purposes in one display

    Hi there,
    I'm using LV10 and I'd like to know if there's a simple way to create two different ROIs in one image display with different use.
    For example:
    An avi file is displayed. I create a ROI by drawing on the image display to shrink the regarded area (to save computing resources and time) of the avi. I create a second ROI (also by drawing on the image display) to set a location for a colour analysis.
    At the moment, I'm using only one ROI by drawing it on a display and getting its data by using a property node. I reckon this can't work with two ROIs in one display.
    My idea is to use a switch and local variables to get what I need, but this seems quite circuitous.
    Is there any smarter way?

    Hello seasoo,
    alternatively you could use "unbundle by name" and then index the contours (for loop or index array). After indexing, use "unbundle by name" again to extract the points of each ROI - top left point, bottom right point.
    Best regards,
    K
    https://decibel.ni.com/content/blogs/kl3m3n
    "Kudos: Users may give one another Kudos on the forums for posts that they found particularly helpful or insightful."

  • Sharing Files Amongst Two Computers With DIFFERENT Versions Of Windows (XP & Vista)

    I just bought a WRT54G4 Wireless-G broadbad router & am a n00bie to this whole networking thng.  As things stand now, I have got everything whereas both my desktop PC (Windows XP Home Edition) & my wireless laptop PC (Windows Vista Home Premium) are online (Both local & Internet) HOWEVER I cannot seem to get things whereas my desktop PC shares files which can then be viewed & otherwise accessed by the laptop.
    Here's what I'm trying to do....
    * Have BOTH computers access the Internet via private network (This I have already managed to do)
    * Have the desktop share files which can be accessed (Wirelessly or not) by my laptop
    Essentially, I want to be able to make use of BOTH HDs as needed.
    My desktop is an old AMD Duron 1 Ghz. computer with 512MB of RAM & can handle SOME small tasks however the big gun is my laptop (A 1.86 Ghz. Intel Pentium with 3 GB of RAM). Because of it's speed & memory, I'd like to have the laptop handle the larger & more intensive tasks.
    Although my laptop has a smaller HD compared my desktop (A 136 GB HD in the desktop (Out of 200 GB) compared to a 141 GB (I'm guessing this HD is around that size but since it came pre-installed & I'm currently leasing-to-own, I don't know), I'd like to be able to make use of BOTH HDs if at all possible.  All I need is for the two computers to see the two HDs & all the files on it.
    I have tried the setting up of file sharing as instructed elsewhere on the Linksys site, but lost it when I restarted both of my computers since that's what the page told me to do (I followed the Windows XP as the desktop has all the files I want to be shared & Windows XP is the OS of the desktop).  Should I have not done this?
    Also, my ultimate goal is to GET RID of the big bulky monitor which I have plugged into the back end of my desktop PC & just simply use the laptop instead since it doesn't take up so much room on the desk.  Is there a software-based "Virtual Monitor" or monitor emulator of some kind which I can download (FREE please ) that will allow me to see the desktops of all the computers on my network just as if I
    had REAL monitors?  If so, where might I find one? 
    In short, whle I have accomplished a great deal in these last few days since I bought the router & linked the two computers together, as you can see, I still need some help & I've got some learning to do.
    Any help I can get wouldbe MOST appreciated.
    Cheers
    Pat Cook
    Denver, CO 
    Message Edited by asmyworldturns on 07-06-2009 06:32 PM
    Solved!
    Go to Solution.

    File & Printer Sharing IS enabled on the desktop (Which has all the files I wish to share) HOWEVER.....
    Ricewind wrote:
    Make sure File and Printer Sharing is Enabled...
    Also make sure both the computer's are in the same workgroup...
    The default workgroup name in Windows Vista has been changed to WORKGROUP. In WindowsXP, the default workgroup name is MSHOME...
    Also go into the computer software firewall on each computer, and set it to "trust" the other computers on your network.
    If your firewall or PC security program keeps a list of trusted applications (also known as a "trusted zone"), then make sure that your router is in the trusted zone on your firewall...
    As indicated before, both computers have DIFFERENT operating systems.  The laptop has Windows Vista HP installed while the desktop has Windows XP HE installed.  As such, are you suggesting that I stick with the default workgroup names just to keep things simple?
    As for the firewall & other security software, I have Windows Defender plus SpyBot (Desktop only), ThreatFire & AdAware (The latter I rarely use since ThreatFire fills this need rather nicely).  Would I have to go into Defender on both computers & tell it to trust the other computer?  Network Magic already does this with both computers (Yes, I have Network Magic installed on both computers).
    Cheers
    Pat Cook
    Denver, CO 

  • What happens if two iPhones with different versions of ios share an identical ID and password?

    I activated my new iPhone 6 as a replacement of  my old iPhone 4, using the same apple ID and phone name. Everything the old iPhone 4 had is now on the new phone. What happens if I connect my old phone, which I believe is still registered as before, to iTunes?  All the applications on 6 (ios 8.1.3) have been updated and my iPhone 4 has ios 7.  If I back up the old 4 on to my iTunes account, does it affect my new iphone 6 when I up date it on the same iTunes account?

    MacMost Now 653: Setting Up Multiple iOS Devices For Messages and FaceTime
    Yuu can also
    Create a NEW account/ID for her using these instructions. Make sure you follow the instructions. Many do not and if you do not you will not get the None option. You must use an email address that you have not used with Apple before. Make sure you specify a birthdate that results in being at least 13 years old
      Creating an iTunes Store, App Store, iBookstore, and Mac App Store account without a credit card
    More details of how:
    http://ipadhelp.com/ipad-help-tips-tricks/how-to-get-free-apps-from-the-app-stor e-without-a-credit-card/
    Use the new ID on her iPod but only for:
    Settings>Messages>Send and Receive
    Settings>FaceTime
    Settings>GameCenter
    and Settings>iCloud if you want her to have separate Contacts Calendar and some other things.   
    Continue to use the same/common Apple ID for Settings>iTunes and App stores so you can share purchases.

  • Bible software with different version

    Hi all, thanks for all good work you are doing here.
    Please I want to ask: is it possible to have a parrallel bible application in my phone? I mean a bible with different versions as one application in my phone?

    Steve,
    Each web application has its own session within a J2EE container. You cannot share sessions, unless you deploy both apps as one web application which is probably not what you want. So, yes, the only work around I can think of is abandoning container-managed security so you can navigate to the other web app with some request params that cause an "auto-login" to happen.
    Steven Davelaar,
    JHeadstart Team.

  • Install CRS and RAC with different users

    I' m tring to install CRS and RAC with different users.
    It is supported but I don't find documentation.
    Have someone experience with this configuration ?
    My question are related to permission/own of voting and ocr file.
    in this configuration is CRS owner or DB owner that run srvctl commands ?
    Thanks !

    Yes it is ... check out the RAC FAQ on metalink, and just as Chris metioned the users will need to have the oinstall group as their primary..
    "Is it supported to install CRS and RAC as different users.
    Yes, CRS and RAC can be installed as different users. The CRS user and the RAC user must both have "oinstall" as their primary group, and the RAC user should be a member of the OSDBA group.
    Modified: 09-SEP-04 Ref #: ID-5769 "

  • How to combine two applications with different workspaces in APEX

    Hi,
    Can anyone help out in merging two applications with different workspaces in APEX 3.2 ?
    Thanks in advance,

    Hello Satya,
    >> I am Satya …
    Please take one more step to help us and update your forum handle to something friendlier than user123… Thanks.
    >> Can anyone help out in merging two applications with different workspaces in APEX 3.2 ?
    This is not a trivial task.
    You didn’t mentioned if both workspaces sharing the same APEX instance, or they are on two different instances (machines). I believe the latter is a pre-condition to a success.
    First you need to remember that importing an APEX component, like a single page, is possible only to the same application that it was exported from. This is still valid if you have the same workspace on two separate APEX instances – one is an import of the other (which makes it an identical copy). Still, the application ID must be the same, or you’ll get the following error: “This page was exported from a different application or from an application in different workspace. Page cannot be installed in this application.”
    You can’t simply manipulating the export file, if the two workspaces are sharing the same APEX instance, as all workspaces on the same instance shares the same APEX metadata files, and you’ll receive a “unique constraint violated” error messages. That means you can’t import one application into the workspace of the other, even if you are using a different application ID.
    As far as I can see, the only viable way of doing an application merge is to have two identical workspaces, on two separate APEX instances. The two applications should share the same application ID, although this parameter can be changed in the import file. You should export the page in one application – on the first instance – and import it into the other application – on the second instance.
    You should also make sure that the exported page ID doesn’t exist on the target application, otherwise it will be replaced by the new imported page. Also, if the imported page include references to shared components that are not defined on the second application, it might also pose a problem.
    As I said, this is not trivial. The benefits are mostly depend on the amount and complexity of the pages you want to merge. If they are not many, and simple, you should consider just re-creating them on the target application. If they are very complex, the merge might fail anyway.
    Regards,
    Arie.
    Please remember to mark appropriate posts as correct/helpful. For the long run, it will benefit us all.

  • RAC with different OS?

    Hi
    I want to add another cluster to my RAC with different OS (Windows 2003). And my clusters OS is "Suse 9". Can I do it or should I change Windows OS to Suse?
    Regard

    Hi
    Thanks for your attention
    I have a RAC with two cluster (Suse 9 OS). And I want to add another cluster with Windows 2003 OS. I don't have any problem with network setting (node connectivity) just I have problem with 'Oracle' user (user equivalence).
    now my question:
    Is a way to define the 'Oracle' user in Windows OS?
    mean while I used the NFS for disk-sharing, and I can use a "MS Windows Services for NFS" for define my users and groups.
    another question: Can I use different type of Linux like FreeBSD or RedHat?
    Best Regards

  • I have two users with different music on each itunes and i can only use one library, how do i use both for one iTouch?

    i have two users with different music on each itunes and i can only use one library, how do i use both for one iTouch?

    Chris, I believe this link may have the information you're looking for. Welcome to discussions!
    http://docs.info.apple.com/article.html?artnum=300432

  • Can I use iCloud to sync two devices with different apples Ids?

    Can I use iCloud to sync two devices with different apple ID's

    What do you mean by "apple ID"?  There's an ID you can use at the iTunes store to buy songs, apps, etc.  there's an ID you can use for your iCloud account - the two can be different or the same. So which service are you referring to when you talk about an apple ID?

  • Can I sync two ipods with different ID on the same computer?

    can I sync two ipods with different ID on the same computer?

    Hi,
    Yes you can as long as you have two seperate user accounts on your computer. Hope this helps.
    xxmitchxx90

  • Can I sync two iPads with different users and email addresses on the same computer

    Can I sync two IPads with different users and email addresses on the same computer.

    yes, just make sure you turn off auto-sync to keep everything organized before you try syncing
    on a pc
    edit > preferences > devices - 'prevent ipads, iphones, and ipods from syncing automatically' needs to be checked

  • HT204053 I have two iphones with different numbers that I use my apple ID for purchases, etc.  How do I get my second iphone setup on icloud?  I would like to use the features of icloud for both of my iphones.  Thank you

    I have two iphones with different phone numbers that I use.  I have one of them set up on icloud now, but do not know how to set up my second device on icloud.  Both of my iphones use my same Apple ID for purchases, etc.  Is there a simple way to add a device to my icloud account?  Thank you in advance for any help someone may be able to give me.

    To move one of the phones to a different iCloud account (if that's what you want to do), go to Settings>iCloud and turn all synced data to Off.  When prompted, choose to keep the data on your iPhone.  After everything is off, scroll to the bottom and tap Delete Account.  This will delete the account from the phone but not from iCloud so the other phone will not be effected.  Then set up a new iCloud account with a different Apple ID and turn iCloud syncing in Settings>iCloud back to On.  When prompted, choose Merge.  This will upload the data to the new iCloud account.
    You will then have to go to icloud.com and sign into each iCloud account separately and delete any unwanted data that you don't want on the phone syncing with each account.

Maybe you are looking for