Is it true that DVD Studio Pro will not burn HD discs?

I an considering shooting in HD and editing that in Final Cut Express, but I have been told that DVD Studio Pro won't create a HD disc without a very expensive addition of something called Blue-Ray. Are there any advantages of shooting in HD, if the final disc won't support it? Would the aspect ratio be 16:9, but with no better definition?
Thanks, Bob

You're better off putting it into Compressor and using one of the DVD presets such as DVD Best Quality 90 mins. That will give you much better quality than DVD SP's built-in compressor.
SD stands for Standard Definition and refers to NTSC, PAL, SECAM, etc, depending on which country you are in.
In DVD SP you can change the aspect ratio settings so that it will display in 16:9 on a widescreen TV but letterboxed on a 4:3 screen.

Similar Messages

DVD studio pro will not burn menus PLEASE HELP!!!!!!!!!!!!!!

PLEASE HELP!!!
I have created a project, a DVD with menus and subtitles in 2 languages, yet when I burn the DVD (both using build/format option and build format options separately)the resulting DVD has no main menu, actually it has no menus at all! it goes straight into the DVD film where I can change subtitles language only from the remote buttons. The project compiles successfully but once formatting it gives me two hilghlighted errors in the log (which I gather are the layouts/menus)HERE IS THE LOG (highlighted part is error message):
Building Project Treesitting DVD with sub+menu
17/12/2007 14:12:01
Build Folder /Users/adelitahusni-bey/Library/Caches/DVD Studio Pro Files/HVDVDTS/HVDVDTS/nomad/treesit dvd
Starting DVD Build TREESITTINGDVD_WITHSUB...
Compiler Initializing...
Precompiling Project TREESITTINGDVD_WITHSUB
Compiling VMG Information...
Created 15 PGCs in VTSM1
Created 8 PGCs in VMG.
2 Menu(s) will be created...
Compiling Menu PGCs...
Compiling Menu#1 (Menu 1)...
Skipped Rendering Menu:Menu 1,Language:1.
Compiling Menu#2 (Menu 2)...
Skipped Rendering Menu:Menu 2,Language:1.
Writing HV000M02.EVO
1 VTSs and 1 Titles will be created...
Compiling VTS#1 (Track 1)...
Preparing Subtitles...
Muxing HV001T01.EVO
Done.
Linking VMG...
Linking VTS#1...
Writing VTS#1...
Writing VMG...
Writing Layout Info...
Compile Completed Successfully
+*Warning: The file ‘TREESITTINGDVD_WITHSUB.layout’ found in the VIDEO_TS or HVDVD_TS folder will not be included in the final disc.*+
+*Warning: The file ‘VOB_DATA.LAY’ found in the VIDEO_TS or HVDVD_TS folder will not be included in the final disc.*+
Start formatting
Formatting as Standard DVD
Simulation mode is off
Lossless linking is on
Number of layers is 1
Doing side 1 of 1
Playable in region 1,2,3,4,5,6,8
Disc size is 12 cm
Disc has no copyright material
Writing UDF 2.50 structures
Writing files
Writing final UDF information
Formatting finished.
Formatting finished.
DOES ANYONE PLEASE KNOW THE REASON FOR THIS???? AND HOW TO SOLVE IT???? PLEASE PLEASE PLEASE...HAVE TO SEND THIS PROJECT OFF SOON.
I have burned another project with menus succesfully..

Hi
FIRST check that your Play Movie button in your menu has NOT an Auto Action selected that make it plays automatically your movie when the Menu loads. You'll find that setting in the Advanced tab of Inspector. If not . . .
You can try a workaround, no matter that if you have your Menu as First Play it must work. Try yhis:
- Create a simple black JPG file i.e. in Photoshop
- Create a Slideshow
- Add a the JPG to the slideshow, set duration 2 secs
- Set the Slideshow as First Play
- Set Slideshow End Jump to your Main Menu
Build and burn again.
Alberto

DVD Studio Pro will not burn DVD in Lacie D2 External DVD Burner

I ordered a new pack of DVD's. These are the Beall 16x DVD's I bought from Meritline.com. I had been using the 8x Beall's with no problem. I was told that my interal drive was not compatable with the faster burning DVDs. So I bought a LaCie D2 External DVD burner 16x. I still can't burn a dvd in dvd studio pro. I tried Patchburn. It said that this burner is already supported.
I am using DVD Studio Pro 2.
Any ideas?

Have you tried burning on other types of brands when burning to your external LaCie? My company bought a NEC external DL burner and it only worked with some type of discs, Maxell DVD+R DL worked but Traxdata DVD+R DL and some other Noname disc didnt work, maybe try that?

DVD Studio Pro will not recogise my chapter markers!!!

When I export my Quicktime movie from Final cut, I include the DVD Studio Pro markers.
However, when it gets into DVD Studio Pro, it does not recognise them at all.
I tried in vain to go back to Final Cut Pro and export the markers "as a text file" but could not find anywhere to do that. I looked at XML exporting but that did not work either!
How can you get Final Cut Pro to just export chapter markers.
Help!

You might also try right-clicking on the mpeg in the track in DVDSP and choosing "add embedded markers". I think I remember noticing that markers did not necessarily import automatically when adding an mpeg to a track, if there were any markers already in that track (with the exception of the un-deletable first one).
There is also an option in the Compressor preset, in the Encoder pane of the Inspector, under Extras, where the inclusion of markers can be checked on or off. If you are exporting to a Quicktime movie before importing to Compressor, you should be able to see the markers in the preview window by choosing to show them from the markers dropdown to the right of the Compressor preview window's scrubber bar.
Hope this helps.
Max Average

DVD Studio Pro will not load videos

Hello,
Ever since I upgraded the latest Quicktime Update I cannot load video assets into DVD Studio Pro. The program keeps locking up.
I have deleted my DVD Studio Pro preferences several times with no success.
Any Ideas?
Thanks,
Mike Kommersmith

When you try to load video assets from the palette, the spinning ball just comes up. I didnt leave it that long before force quiting. But the poster left if for an hour.
I'm using final cut studio. But it all happened on my imac and macbook pro right after the quicktime upgrade.
I did find a work around, which I posted above. Instead of importing thru the palette, just import by clicking file / import/ asset. But the heck would cause the palette to lock up like that? When you force quit dvd studio it says "not responding" next to the program name. I've tried all different video files on my desktop, one at a time. But I dont think the program even gets that far, it just locks up as soon as you hit the palette area of the screen.
I can import audio, stills ,etc without a problem.
I'm just amazed that noone else ran into this problem yet.

Dvd studio pro does not burn readable dvds on other platforms

I have DVDSP 4.1.2 and always used it to create DVD with content.
Now after I upgrade to 10.6.4, I can burn DVDs but they are not readable on other platforms (PC or DVD Players).
Thank you

I have no such issues on my systems, we burn lots of DVDs. Description suggests something wrong with your DVD drive not the software or OS since neither Eric nor I can duplicate your problem.
bogiesan

Windows 7 does not recognize cd/dvd drive. Will not burn a disc

           In November 2013, I bought a refurbished hp Compaq 7900 convertible minitower, Product No. NJ3226UC#ABA, 32-bit. Windows 7 and WMP 12 were installed by the company that refurbished it.   WMP's  play, rip, burn, sync worked perfectly.
           I made the mistake of installing itunes. I purchased music and made a playlist from my library and itunes. I tried to burn the playlist with Memorex discs.  WMP burn would kick out the cd at 99% complete. I tried a different brand of disc and had the same problem. The message each time was 'Windows Media Player Encountered an error while burning. Verify that the burner is connected properly and that the disc is clean and not damaged.' I tried burning a disc using itunes burner but it didn't do anything.
           First, I removed every Apple application from my computer. Then I ran Microsoft CD/DVD trouble shooter. It didn't correct the problem and gave me the message "cannot locate CD/DVD burner". I ran trouble shooter in the Control Panel selected System Security's, Find and Fix. Then Selected Configure a Device . Results were 'Hardware may not be detected try to do what you wanted to do again' I tried 2-3 times. WMP would not burn.  Tried Apple for help and didn't want to reinstall itunes. I reinstalled Quick Time.   Followed Microsoft's 5-step resolutions:
          1. Used the troubleshooter in Control Panel.
         2. Ran CD/DVD Fixit trouble shooter.
          3. Manually fix corrupted registry.
         4. Update or reinstall driver.
          5.  Create a sub registry key.
I tried to burn after every step and got the same result.it burned to 99% and kicked out. I used system restore back to May 15, 2014 thaat was before installing iTunes. No burn.   Checked driver and response was that 'Driver is working. No problem was found'.    Today, ran Troubleshooter in ControI Panel and this was the messsage, 'Configuration Settings May Be Incorrect'. How do I correct this? Help! What next?

Hi,
You were given some very good advice on your other post. I ran into a very similar issue when I had installed iTunes and the end result was that I had to do a factory recovery back to a day one condition. Then I had to do a slow software installation process, checking every time I had installed a third party application. I got tripped up a couple of times but determined that I had to install iTunes before installing other CD/DVD media programs (Roxio,WMP and Cyberlink).
Do a fresh OS installation without the extra third party software and then install Imgburn. Then use Imgburn to determine the capabilities of your optical drive and match the media specifications those detected by Imgburn to the media type that you are using. Do not use cheap media as the firmware in your optical drive may not support it. I prefer to use Verbatim media. Now see if Imgburn will burn your optical media before attempting to install iTunes and other CD/DVD optical media programs.
HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
HP Photosmart Premium C309G, HP Photosmart 6520
HP Touchpad, HP Chromebook 11
Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
Windows 7/8 UEFI/Legacy mode, MBR/GPT

HT1338 after upgrading to OS Mountain Lion my DVD studio pro will not compile. There doesn't seem to be any software update for DVDSP4.

after I upgraded to mounatin lion I tried to make a dvd with DVSP4 All goes well importing, connection chapters etc. Looks fine in simulate. When I try to make the DVD the measseage says compiler failed.

I went back into DVD SP and clicked on build.
After the build I was able to burn a disk.

Is it true that MS Office Suite will not run on Lion?

is it true that MS Office Suite will not run on Lion?

Office 2004 was written for PowerPC. To run Office 2004 on an Intel based Mac, you need Rosetta to translate PowerPC instructions to Intel instructions. OS X Lion no longer includes or supports Rosetta. As such, any application written for PowerPC no longer work on Lion, including Office 2004.
Office 2008 and Office 2011 were written for Intel. They'll work just fine on OS X Lion.
To address your problem, you can do one of the following:
1) Reinstall OS X Snow Leopard from a backup, if you made one.
2) Upgrade to Office 2011.
3) You could use a suite of productivity apps that can import Office documents, such as OpenOffice, or Apple's iWorks. There will be some incompatibilities between these applications and Office though.

My macbook pro will not startup, startup disc is full

my macbook pro will not startup, startup disc is full

Freeing Up Space on The Hard Drive
1. See Lion/Mountain Lion/Mavericks' Storage Display.
2. You can remove data from your Home folder except for the /Home/Library/ folder.
3. Visit The XLab FAQs and read the FAQ on freeing up space on your hard drive.
4. Also see Freeing space on your Mac OS X startup disk.
5. See Where did my Disk Space go?.
6. See The Storage Display.
You must Empty the Trash in order to recover the space they occupied on the hard drive.
You should consider replacing the drive with a larger one. Check out OWC for drives, tutorials, and toolkits.
Try using OmniDiskSweeper 1.8 or GrandPerspective to search your drive for large files and where they are located.
If you are no longer able to boot your computer, then the drive is too full and has become corrupted. You may be able to repair it using Disk Utility on your Installer DVD:
Repair the Hard Drive and Permissions
Boot from your Tiger Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
If this doesn't work, then you will have to erase the drive and install OS X from scratch. From the Tiger installer disc you will choose the Erase and Install install option.

My DVD will play DVD's but will not burn from FCP

my DVD will play DVD's but will not burn from FCP also the Finder does not recognize when I load a black DVD

You need DVD burning/Authoring software.
EIther iDVD or Roxio Toast or try freeware burning software Burn for OS X.
iDVD is no longer available, but the last complete version that still works comes with Apple's iLife '09 apps.
You would need to search for this on online sites like Amazon to see if you can still purchase.
You install the iDVD app and all the authoring themes by doing a custom install of the disc and ONLY installing the iDVD app and iDVD themes.
Here are a few copies of this for sale on Amazon U.S. site.
http://www.amazon.com/s/ref=nb_sb_noss?url=search-alias%3Daps&field-keywords=iLi fe+%2709
Roxio Toast is another option.
http://www.roxio.com/
And freeware burn software Burn for OS X.
http://burn-osx.sourceforge.net/Pages/English/home.html

My iDvd will not burn a disc...there is an encoding error that comes up after the title screen

Like it says in the title...My iDvd will not burn a disc...there is an encoding error that comes up after the title screen.
Here is the process that I have been doing.
1. put in a blank disk and with the project already being done, i hit burn (not too hard).
2. iDvd then starts to encode the title.
3. After the title has been encoded, the burning stops and a message comes up saying "there was an error during encoding" and when ever I try to burn the same message keeps on coming up.
I am running version 7.0.4
any help would be extremely helpful

Try using this workflow:
Once you have the project as you want it save it as a disk image via the File ➙ Save as Disk Image menu option. This will separate the encoding process from the burn process.
To check the encoding mount the disk image and launch DVD Player and play it. If it plays OK with DVD Player the encoding was good.
Then burn to disk with Disk Utility or Toast at the slowest speed available (2x-4x) to assure the best burn quality. Always use top quality media: Verbatim, Maxell or Taiyo Yuden DVD-R are the most recommended in these forums.
Then you can concentrate on the content if you can't create a disk image of the project.
Read these posts by Bengt Wärleby. One of them may have helpful info:
I'm trying to burn an iMovie in iDVD...: Apple Support Communities
I am using idvd and i keep getting the...: Apple Support Communities
encoding video error: Apple Support Communities
OT

ITunes 12.0.1.26 on 2009 Mac Pro will not burn disc - error message medium write error

Just upgraded to iTunes 12.0.1.26 on 2009 13" Mac Pro with Lion. Will not burn music disc and getting error message "The burn failed because of a Medium Write Error". Is this version of iTunes compatible with Lion and if not how can I revert to previous version.

Just upgraded to iTunes 12.0.1.26 on 2009 13" Mac Pro with Lion. Will not burn music disc and getting error message "The burn failed because of a Medium Write Error". Is this version of iTunes compatible with Lion and if not how can I revert to previous version.

Dvd Studio Pro Serial Not Working

Hi all,I recently had to replace my late 2005 G5 Powermac due to its inconsistency in powering up.
Cutting the story short,I bought a second hand PowerMac which Ive been using for the past months with no problems,I re installed my Original compy of Final Cut Studio and everything seems to work fine,oly today Ive tried to burn a project on DVD with DVD Studio Pro 4 and it will not accept my original serial !
Ive already tried deleting the FInal Cut System ID and reinserting the serial but no luck.
Anyone had this problem before ? If not ,how could I claim Apple ?after all the original suite cost me back in its day around 1000euros.
Thanks

kkita75 wrote:
Thats the version I have on my laptop,sorry !
Well, there never was a Final Cut Studio 9. So I'm still confused. What version is listed on your disk?
DVD SP shouldn't be asking for a serial number if the FCS suite was correctly installed.
Download this utility and remove DVDSP (it will ensure that you get all the associated files). Reinstall from the install disks. Then run Software Update repeatedly until there is nothing more listed. Repair permissions in Disk Utility and launch DVDSP.
I wouldn't be surprised if this fails to cure the problem. If it doesn't work, repeat the process and uninstall the entire suite, running Software Update, and so forth.
Russ

DVD Studio Pro won't burn disk

I have a DVD Studio Pro file that used to burn without a problem, but now it won't at all. I found all of the files necessary, but when I click the burn button, I get a warning:
The Build Location folder contains a VIDEO_TS folder(standard DVD content). You must remove the VIDEO_TS folder from the Build Location in order to proceed with Build/Format of a HD DVD project.
I wouldn't know where to find this Build folder anyway. I am not sure what to do at this point.
Can anyone shed some light?
I have a 2010 2.66 GHz Macbook Pro Core i7
Thanks!

Are you trying to build an HD DVD rather than a standard defintion DVD? I've never tried to build an HD DVD... does that format also use the VIDEO_TS structure?
A simple alternative to finding and removing the troublesome VIDEO_TS folder is to select a new location for the build -- an empty folder on your desktop, in your documents folder, wherever.
Or, if the contents and/or design of the disc hasn't changed since the last time you built it, find the current VIDEO_TS folder and use that to burn your disc rather than building it anew.

Is it true that DVD Studio Pro will not burn HD discs?

Similar Messages

Maybe you are looking for