Is K8N Neo 2 platinum a good OC board?

My current spec:
A64 3000+ s939 Winchester, stock HSF
Abit AV8
Geil 3200 Dual Channel Kit 2x512
i'm not very satisfied with my OC. HTT multiplier is 5x by default, which means if my FSB is 250, 4x HTT multiplier should be fine, 4x250=1000. But i can't even do 3x.
I can OC to 260x9 (8:2:1) @ stock voltage with stock HSF Ram @ 333/400 @ 2.7v, HTT on 2x
can play games and stuff but when Prime95 test it, error within the 1st 10 minutes.
So I want to try a new board, they said the MSI K8N neo 2 PT is a good board for over clocking.
Fill me in

I don't have any problems putting the "whip" to mine.... Only thing I've noticed is that I get a lot better & more stable OC's by:
- Disabling C&Q & Aggressive Timings
- Loose RAM timimgs: 2.5-3-3-10 works pretty good for me
My 3000+ 90nm runs stably at 9x275 all day long.... without running crazy voltages or using funky BIOS settings. Best OC with 1t timings I've been able to get was 9x285 & I have hit 290 with 2t, but 275 seems to be the "sweet spot".

Similar Messages

MOVED: Looking for feedback on K8N Neo NF4 Platinum SLI, LUV THIS BOARD

This topic has been moved to Overclockers & Modding Corner.
Looking for feedback on K8N Neo NF4 Platinum SLI, LUV THIS BOARD

Im no pro but with your raid setup you need to stay with bios 3.0, 3.1 or 3.2. I understand that 3.3 & 3.4 causes problems but the new 3.53 beta bios fixes the problems in 3.3 & 3.4. See below:
https://forum-en.msi.com/index.php?topic=80933.120
Regarding your pcie clock, if you are using coolbits and nvidia drivers only (no MSI drivers at all), then I have used nvidia's ntune to help set the clock. For my x1 msi 6600gt, working backwards from the bus speed optimization it equalled to 106...but I am really not good at this and you should post your question under the VGA portion of this forum for a better answer to that 1 question.
However, using MSI's DOT works well too and its automated.
Btw, the pcie setting has nothing to do with your cpu/memory overclock.

Problem with K8N Neo 4 Platinum

Hi I am new on this forum.
I have problem with proper configuration of the BIOS in K8N Neo 4 Platinum. My processor is Athlon 64 3000. It has 1800 clock. My BIOS makes default 200MHz x 5. It makes 1000 MHz clock. Will it be good if I change at 200 x 9?
Other thing: I tried to change at 200 x 9 but in Windows (2000) is still 200 x 5 (acc. to Core Cell). When I chanded on 200 x 7,5 all in Windows was ok. Core Cell showed 200 x 7,5. How I may resolve this problem?

Quote
I have my memory in green slots. Does dual channel works in this case?
- No Green = Channel A, Purple =Chanel B use Green nearest cpu & adjacent purple slot.
Quote
HT freq. 5x
That's your HT multiplier as mentioned by Some1ne not the Adjust CPU Ratio which is the CPU multiplier.
Your CPU is running at the correct speed.
DDR Clock: 167 MHz s/be 200 - this should chnge when memory is in right slots.
Change memory over & let's have a look @ those settings then.
luck

MOVED: MSI K8N Neo 2 Platinum Problem

This topic has been moved to Overclockers & Modding Corner.
MSI K8N Neo 2 Platinum Problem

A lot of things could be wrong but it will be easier to figure out if we know what you did. When you say you changed settings in Bios, do you remember your last settings and what you did?
It might be helpful if you created a sig (as described in the forum rules) to show what you have in your system like my sig below. (Hint- use profile button in sign on screen.)
Things could be broken even if there is no visible evidence (such as flames or melted component) of course.
If I had to guess and your d-bracket reading is correct, corrupted bios requiring new bios chip, but let's not guess as a lot of things could be wrong and you don't want to invest in a new bios chip if the board cannot be brought back to life. Consider removing parts and testing them in an other machine. Start with CPU and memory?
Good luck.

Buying a K8N Neo 4 Platinum mobo - need some answers

Hi,
First post here, so I should say I did a search and did actually read the stickys.
Like I said, I'm getting the MSI K8N Neo 4 Platinum and need to know:
1. Does it support NCQ?
2. Can I use "PDP SYSTEMS Memory Dual Channel Kit 184-Pin 1GB (512MBx2) DDR PC-3200, Model PDC1G3200LLK" with it?
(And have it working @ 2-3-2-5-T1 Dual Channel like it should without OC)
2.1 Can I use 4 dimms of this memory without going down to 333mhz?
3. I'll also get a 6600GT, DVD-RAM,DVD-ROM, 200GB HD - which PSU I should go with?
I wanted to get a TT410W, but heard I should go with "Enermax 350W EG365P-VE FMA 20/24Pin Power Supply" because it gives higher 12V rail power.
I dont plan on doing OC
Thanks in advance for your answers, and sorry about my english.

Quote from: kctay on 10-March-05, 02:14:51
Chrisss,
I think that Tiresmoke's point is that your statements aren't productive, I don't see a history of you trying to ask any of the well versed vetrans here for any help regarding the stability of your system, or inherent problems with the mobo in question. You also don't even list the components that make up your system in your signature which might allow someone to help you without you even asking a valid question.
Statements like this; "I have so many stability issues it's not even funny. I have not overvlocked anything and the PC crashes randomly." simply aren't meaningful without knowing the pertenent facst surrounding your issues. Furthermore, the problems you have may have nothing whatsoever to do with the motherboard.
Sixth, this is a good motherboard for your stated needs, I run the SLI version and have nothing but positive things to say about it. I did extensive research before buying this product, and it really paid off, this is a great motherboard.
Actually yes i did ask: https://forum-en.msi.com/index.php?topic=75700.0 But only one person helped me. It could be that the SLI version is more stable. Just read the posts. there are a lot of people with issues with the K8N Neo4 Platinum. Not too many with the SLI. So it's not only me.

K8N NEO 2 PLATINUM - NO 2ND LAN

Hi all
for some reason my k8n neo 2 platinum mainboard only gives me 1 ethernet although it as 2 any idea's how to get them both showing

Hello !!
There are two option in Bios Setup under "Integrated Periphals". The first is "Nvidia LAN" and the second is "Onboard Lan Controller". You have to set both to enabled if you want to use both LAN ports. Make sure you have done that......after this you will be prompted for new network drivers while windowsxp driver installation.
Get the Realtek driver here:
http://www.msi.com.tw/program/support/driver/dvr/spt_dvr_detail.php?UID=607&kind=1
Good Luck
Greetz MurdoK

K8N Neo 4 Platinum Sli & Athlon 64 3200

Somebody know if the mobo "K8N Neo 4 Platinum Sli" can work good with an Athlon 64 3200 (939)

Quote from: jrb357 on 10-March-05, 11:29:32
It'll work just fine with a 3200+. Just use some quality TCCD ram. If you plan OC'n some people are having some difficulty getting over a 220fsb. It seems that the newer cpu's are more prone to this, ones with a manufaturing date of under 0451 seem to OC better.
Aint that the truth!
IF you are planning to o/c then forget about this board for the moment, until a new bios is available......
That is the only downside to this board, otherwise its a very stable board!
I have corsair 4400 and cant get over 220 fsb with it....

K8n neo 4 platinum - replacing chipset fan

i'm thinking about buying a k8n neo 4 platinum for my next motherboard. however i read on newegg that it has a noisy chipset fan and that it can't be replaced.
is it noisy? can it be replaced? if so, what would make a good replacement fan?
i appreciate your input.

Quote from: freeAgent on 08-June-05, 05:02:03
I've put a Zalman resistor into my NB fan's circuit and the board's running fine, and has been 24/7 for over a month. Noise was dramatically decreased. However, I'm not using anything above stock voltage for the northbridge with this thing on. Eventually I might pop it off and make sure the thermal paste is alright and properly applied, but I don't have the time right now and it runs fine.
where did you buy the Zalman resistor? how did you install it?

K8N Neo 2 Platinum Computer just...stopped working! Help needed please.

Hey all. About hmm, a month ago I built myself a new PC (first time I'd done it from scratch and got some useful help here) Specs were:
MSI K8N Neo 2 Platinum, A64 3200+ Venice, 1GB DDR Corsair Value, Radeon 9800 Pro 128mb, 40GB Hard Disk IDE, 80GB Hard Disk IDE, CD R/RW Drive and a Tagan 420W (23A 12V+) PSU.
Ok, it worked the day I built it just fine and has NO hick-ups or any indication of a problem for the past month. Running temperature was very cool etc. Now, I last turned it on about 24 hrs ago, downloaded some PDF files, shut it down. All was fine. Woke up this morning. Pressed the power button: ABSOLUTELY NOTHING. ZIp. No hum, fan movement, anything.
Now, considering it seems to have broken whilst being turned off. What could be the problem? So far I've tried:
* Using a different power socket
* Using a different plug
* Reconnecting the power switch and motherboard power connectors
None of those worked. There wasn't a thunderstorm or anything so I don't think any kind of surge would have been the problem. I havn't tried manually shorting the power switch connectors. What's a safe way to do that? Any other suggestions? How can I test my PSU is infact doing something?
Thanks

Quote from: go_for on 01-September-05, 21:47:40
Try the easy way first, disconnect every cable from the back of the computer. Do a CMOS clear/normal as instructed in the manual. Connect the display(with power off), keyboard and power cable. Turn on PSU, press power switch, if it fires up, press and go into bios and do your settings, save and exit. Power off and connect the rest of your external stuff. Power up.
>
No luck :( Is it likely that my PSU has fused/broken in some way since I'm getting no response or fan movement?

Boot Problem with K8n Neo 2 Platinum

I cant get my Computer to load the bios
Sometimes when I restart my computer it will lock up in the Bios Sign on and the only way to get it to boot through is to keep resetting the computer and turning the power off and on. It does this on a random basis, Ive also had problems with it locking up if the dynamic oc is turned on.
Has anybody heard of this happening or know how to fix it?
MSI K8N Neo 2 Platinum Bios 1.4
Athlon64 3800+
TwinX 1024 3200LLPRO
Xtasy 9600XT
Ultra Products X-Connect 500w
2x WD Raptor 10,000rpm SATA HD in Raid 0 cfg
SB audigy 2 ZS
LiteOn cd/dvd drive
LiteOn dvd burner
Windows XP SP2

Corsair memory is known to be troublesome with AMD64.
Nevertheless, if everything is set correctly, it'll work. I've been running the LLPRO 3200 1GB kit at 220MHz without any noticable problems. Run a couple of rounds with Memtest86+ to verify memory functionality.
Can you please give your specifications on the power supply unit (PSU), especially the amperage on the +12 volt rail.
Anders.

Is a 24 pin atx cable needed for the k8n neo 4 platinum?

i have a Thermaltake Silent Purepower 480 Watt PSU. i am thinking about upgrading from an msi k7n2 delta to the k8n neo 4 platinum motherboard.
if i do this, do i need this adaptor cable?

Quote from: Deathstalker on 08-June-05, 22:18:54
ryansebiz,
That Power Supply has the 24 Pin Cable as part of its cables. You do not need any adapters.
Take Care,
Richard
thanks richard, you saved me $11 on a cable adaptor

MSI K8N Neo 2 Platinum motherboard extra firewire ports?

I'm installing an MSI K8N Neo 2 Platinum motherboard into my case and although I don't need them right now, I would like to be able to access the extra firewire ports. Does anyone know the best way to get ahold of the MSI motherboard 1394 connectors for J1394_1 / J1394_2 option?
I have the D bracket with the LED's and two extra USB connectors but I don't have the firewire connector. I have USB ports and audio ports on the front of my case which I will use, but no firewire connector, but there is a place for one, just no connector/wires or hardware. Also what is the difference between those two connectors shown in the picture of the optional firewire that appears in the owners manual? They have a different shape.
Where can I get one? I don't need the proprietary peice if I can use something else.

Fireware ports are faster for example external drives will be fastest 1394 rather than usb2.
there are many companies doing drive bays which can add ports to your current case see Front Port Extension Unit however you need to decide what exactly you want,
The example shown passes through case & connects to rear ports.
I prefer ones hich connect to the mobo risers leaving rear ports free, however you then have the complexity of matching the pin outs so that it works with your system. Remember it's not like tring to boot, you may not get a 2nd chance if you miswire connection. . If you can find them the best connectors are those with single pin leads, where each individual wire has its own plug so that you can match it to the mobo's pin out diagram for the particular port.
luck

K8N Neo 4 Platinum 1.8bios any try?

K8N Neo 4 Platinum 1.8bios any try?
better 1.3? 1.6? oc and stableand less bug...anyone try this?

After using the 1.6 BIOS for quite some time (ref. to my signature) I am testing the 1.8 BIOS now for some days. It was introduced in the German MSI forum (here) some days ago and also other people already reported their first experiences:
- works fine
- some more options in the BIOS are available (e.g. disabling seeking for a floppy, RAID on all IDE drives + SATA drives)
- however, only 4 memory dividers (100/133/166/200) available in 1.8 MSI final; some hidden options are available in the 1.8 MODBIOS from MurdoK (download 1.8 MOD BIOS here )
- 6 memory dividers available in 7125XMOD18 BIOS thanks to MurdoK (download 1.8 XMOD BIOS here) (I have not tried this XMOD BIOS yet!)
- does not solve the "219 BUG" for Winchester CPUs.
- USB2.0 works fine, in contrast to some 1.7x BIOS versions
In fact, I have not found major advantages for my rig, however, it seems to be also not worse than the 1.6 BIOS, what I used before. So I continue to stick to it!
Regards
Juersei

250GB harddisk work in MSI K8N Neo 4 Platinum

Hi!
I have a pair of WD 250GB SATA2 16MB cache harddisks (WD2500KS).
Currently they don't work in my Asus A8N-SLI DLX (BIOS messes up LBA and CHS setting with them)
(smaller 120 and 160 GB hdds work flawlessly in that mobo)
So i am considering to switch to MSI K8N Neo 4 Platinum.
can anyone confirm these babies would work in that mobo?
Are there any known issues with higher capacity harddisks on MSI nforce 4 boards ?
also i hear that the chipset fan is very noisy. Is that true?
The other option would be the Abit A8N Ultra which has the heatpipe design but i am not so comfortable with Abit, since there are too mayn rumors about them.
Any ideas?

not heard any thing with nvidia
there is a thing with some via
http://wdc.custhelp.com/cgi-bin/wdc.cfg/php/enduser/std_adp.php?p_faqid=1337&p_created=1112379341&p_sid=MZ4D46Jh&p_lva=&%20p_sp=cF9zcmNoPTEmcF9zb3J0X2J5PSZwX2dyaWRzb3J0PSZwX<br%20/>%203Jvd19jbnQ9NiZwX3Byb2RzPTIwMyZwX2NhdHM9MTMwJnBfcHY<br%20/>%209MS4yMDM7Mi51MCZwX2N2PTEuMTMwOzIudTAmcF9zZWFyY2hfd<br%20/>%20HlwZT1hbnN3ZXJzLnNlYXJjaF9mbmwmcF9wYWdlPTEmcF9zZWF<br%20/>yY2hfdGV4dD1qdW1wZXI*&p_li=&p_topview=1

Msi k8n neo 4 platinum sli sata issue?

hi i am planning to buy a new motherboard and i decided to buy k8n neo 4 platinum sli board. but recently i heard that it has an issue with
silicon image SIL3132 controller that If there was no drive connected to the controller, the system wouldn't complete the POST. does that issue resolved now? please tell me. any new bios update for that?

hi satya123 ,
Quote
silicon image SIL3132 controller that If there was no drive connected to the controller, the system wouldn't complete the POST
not heard of that one.
But it's easily sorted :-
Bios - Onboard Devices
OnBoard Sil3132 RAID
This setting controls the onboard Sil3132 RAID chip. Setting options: [Enabled],
[Disabled].
OnBoard Sil3132 Mode
This setting allows you to select either SATA and RAID mode for the onboard
Sil3132 RAID chip. Setting options: [SATA], [RAID].
just set OnBoard Sil3132 RAID to disabled.
Sorted

Is K8N Neo 2 platinum a good OC board?

Similar Messages

Maybe you are looking for