Is knowledge of ABAP- HR advantage in getting job as a sap technical consul

hi,,,,
dear experts...
as im in seriously working hard to get a job as abap technical consultant...is ABAP-HR will be an added advantage for me to get a job or not ? what shall i do ? go on pure ABAP or shall i learn ABAP-HR ...thru our sdn site as institutes are collecting lot to teach it...
          what should be my approach now? i have excellent knowledge on abap ...basic topics....
        plz help in this regard...
                                   thanking u...prashanth.

It depends on your Personal Interest if in future u see yourself workin on HR module then go for it otherwise ABAP with some Emerging Latest Technologies like Webdynpro, OO ABAP are highly in demand
tc
gaurav

Similar Messages

In ABAP HR how to get job using position

In ABAP HR how to get job using position (Using Infotype 1001)

Hi anilkumar,
1. u have the position
 u want the Job
2. In hrp1001 table
 OTYPE = 'S' (for position)
 OBJID = POSITION (AS ABOVE)
 SCLAS = 'C' (for finding job)
 SOBID = XXXXXX (here u will get the JOB)
regards,
amit m.

How much knowledge of ABAP is required, if you are working as SAP BI consu

Hi,
How much knowledge of ABAP (coding) is required if you are working as SAP BI consultant.
Can anyone provide me some link that can give me a brief overview of routine writing in ABAP.
Abhi
Edited by: abhigyta on Jan 23, 2012 10:48 AM

Hi Abhi,
Welcome to SDN!
If you are working as a BI Consultant it's good to have ABAP knowledge. Because In BI we use ABAP mainly in writing Routines, Functional Modules, etc.
Please go through the below doc on Routines in BI
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/609eea32-455e-2c10-c08a-c23adf8c934e?QuickLink=index&overridelayout=true
Hope it helps.
Regards,
Raghu

No Knowledge of ABAP, Can I learn SAP NETWEAVER XI ?

Dear Friends,
I do not have any experience or knowledge about ABAP.
Can I learn XI or I MUST definitely learn ABAP first before I proceed to learn XI.
Some people at various institutes told me to learn CA- Cross Applications and that would be enough.
Please post your suggestions......
Thanks and regards,
Raj

HI Raj
Welcome to XI...
If you have any programming knowledge with oops concepts then it is enough to learn XI.
If you know CA then it will be an added advantage...
Maybe this is a good start:
http://help.sap.com/saphelp_nw04/helpdata/en/80/8e3841e26cef23e10000000a155106/frameset.htm
https://www.sdn.sap.com/irj/sdn/developerareas/xi?rid=/webcontent/uuid/a680445e-0501-0010-1c94-a8c4a60619f8 [original link is broken]
This might help you
http://help.sap.com/saphelp_nw04/helpdata/en/14/80243b4a66ae0ce10000000a11402f/frameset.htm
Further, this thread deals with everything that is needed for a starter on XI. Do check them out,
JDBC Receiver: exact SQL statement
/message/527697#527697 [original link is broken]
And after you are done with the documentation probably you can go through this scenario,
JDBC Receiver: exact SQL statement
Also check the following threads which might help you a little more,
Learning XI
XI 3.0 Training
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/13926f23-0a01-0010-149c-c1170e7a25db
/people/sravya.talanki2/blog/2006/12/25/aspirant-to-learn-sap-xiyou-won-the-jackpot-if-you-read-this-part-i
/people/sravya.talanki2/blog/2006/12/26/aspirant-to-learn-sap-xiyou-won-the-jackpot-if-you-read-this-part-ii
/people/sravya.talanki2/blog/2006/12/27/aspirant-to-learn-sap-xiyou-won-the-jackpot-if-you-read-this-part-iii
and once you are through ...follow the following links to weblogs which explain all the basic scenarios in XI
Following are the links to weblogs which will help to develop the basic scenarios.
/people/prateek.shah/blog/2005/06/08/introduction-to-idoc-xi-file-scenario-and-complete-walk-through-for-starters - IDoc to File
/people/ravikumar.allampallam/blog/2005/03/14/abap-proxies-in-xiclient-proxy - ABAP Proxy to File
/people/sap.user72/blog/2005/06/01/file-to-jdbc-adapter-using-sap-xi-30 - File to JDBC
/people/prateek.shah/blog/2005/06/14/file-to-r3-via-abap-proxy - File to ABAP Proxy
/people/venkat.donela/blog/2005/03/02/introduction-to-simplefile-xi-filescenario-and-complete-walk-through-for-starterspart1 - File to File Part 1
/people/venkat.donela/blog/2005/03/03/introduction-to-simple-file-xi-filescenario-and-complete-walk-through-for-starterspart2 - File to File Part 2
/people/ravikumar.allampallam/blog/2005/06/24/convert-any-flat-file-to-any-idoc-java-mapping - Any flat file to any Idoc
/people/arpit.seth/blog/2005/06/27/rfc-scenario-using-bpm--starter-kit - File to RFC
https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/1685 [original link is broken] [original link is broken] [original link is broken] [original link is broken] - File to Mail
/people/jayakrishnan.nair/blog/2005/06/20/dynamic-file-name-using-xi-30-sp12-part--i - Dynamic File Name Part 1
/people/jayakrishnan.nair/blog/2005/06/28/dynamic-file-namexslt-mapping-with-java-enhancement-using-xi-30-sp12-part-ii - Dynamic File Name Part 2
/people/michal.krawczyk2/blog/2005/03/07/mail-adapter-xi--how-to-implement-dynamic-mail-address - Dynamic Mail Address
/people/siva.maranani/blog/2005/05/25/understanding-message-flow-in-xi - Message Flow in XI
/people/krishna.moorthyp/blog/2005/06/09/walkthrough-with-bpm - Walk through BPM
/people/siva.maranani/blog/2005/05/22/schedule-your-bpm - Schedule BPM
/people/sriram.vasudevan3/blog/2005/01/11/demonstrating-use-of-synchronous-asynchronous-bridge-to-integrate-synchronous-and-asynchronous-systems-using-ccbpm-in-sap-xi - Use of Synch - Asynch bridge in ccBPM
https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/1403 [original link is broken] [original link is broken] [original link is broken] [original link is broken] - Use of Synch - Asynch bridge in ccBPM
/people/michal.krawczyk2/blog/2005/08/22/xi-maintain-rfc-destinations-centrally - Maintain RFC destination centrally
/people/sravya.talanki2/blog/2005/08/18/triggering-e-mails-to-shared-folders-of-sap-is-u - Triggering Email from folder
/people/sravya.talanki2/blog/2005/08/17/outbound-idocs--work-around-using-party - Handling different partners for IDoc
/people/siva.maranani/blog/2005/08/27/modeling-integration-scenario146s-in-xi - Modeling Integration Scenario in XI
/people/michal.krawczyk2/blog/2005/08/25/xi-sending-a-message-without-the-use-of-an-adapter-not-possible - Testing of integration process
/people/michal.krawczyk2/blog/2005/05/25/xi-how-to-add-authorizations-to-repository-objects - Authorization in XI
http://help.sap.com/saphelp_nw04/helpdata/en/58/d22940cbf2195de10000000a1550b0/content.htm - Authorization in XI
/people/michal.krawczyk2/blog/2005/09/09/xi-alerts--step-by-step - Alert Configuration
/people/michal.krawczyk2/blog/2005/09/09/xi-alerts--troubleshooting-guide - Trouble shoot alert config
/people/sameer.shadab/blog/2005/09/21/executing-unix-shell-script-using-operating-system-command-in-xi - Call UNIX Shell Script
/people/sravya.talanki2/blog/2005/11/02/overview-of-transition-from-dev-to-qa-in-xi - Transport in XI
/people/r.eijpe/blog/2005/11/04/using-abap-xslt-extensions-for-xi-mapping - Using ABAP XSLT Extensions for XI Mapping
/people/prasad.ulagappan2/blog/2005/06/07/mail-adapter-scenarios-150-sap-exchange-infrastructure - Mail Adaptor options
/people/pooja.pandey/blog/2005/07/27/idocs-multiple-types-collection-in-bpm - Collection of IDoc to Single File
/people/sap.user72/blog/2005/11/17/xi-controlling-access-to-sensitive-interfaces - Controlling access to Sensitive Interfaces
/people/michal.krawczyk2/blog/2005/11/10/xi-the-same-filename-from-a-sender-to-a-receiver-file-adapter--sp14 - The same filename from a sender to a receiver file adapter - SP14
/people/prasad.illapani/blog/2005/11/14/payload-based-message-search-in-xi30-using-trex-engine - Payload Based Message Search in XI30 using Trex Engine /people/sap.user72/blog/2005/11/24/xi-configuring-ccms-monitoring-for-xi-part-i - XI : Configuring CCMS Monitoring for XI- Part I
/people/michal.krawczyk2/blog/2005/11/23/xi-html-e-mails-from-the-receiver-mail-adapter - XI: HTML e-mails from the receiver mail adapter
/people/sap.user72/blog/2005/11/22/xi-faqs-provided-by-sap-updated - XI : FAQ's Provided by SAP
Cheers..
Vasu
** Reward points if found useful **

In abap report how to get substitute Materials

Hi Friends,
In abap report how to get substitute Materials. Is there any function module or bapi available other than Function 'PRODUCT_SUBSTITUTION'
Will appreciate your suggessions with poits.

Hi anilkumar,
1. u have the position
 u want the Job
2. In hrp1001 table
 OTYPE = 'S' (for position)
 OBJID = POSITION (AS ABOVE)
 SCLAS = 'C' (for finding job)
 SOBID = XXXXXX (here u will get the JOB)
regards,
amit m.

How to get proper breakthrough in SAP ABAP

hi experts ,
i was going through different threads that getting job as SAP ABAP fresher is very tough .If i consider my profile i have only 3.5 years of software development experience .If i do ABAP then i will be fresher in SAP .
1)so how should i proceed to get a proper break through in this domain.
2)When is the Peak time for doing this course.
3)Is Master Degree Essential to get a break through in SAP ABAP.I have B.Sc IT
4)is Genovate /Bangalore / Mumbai is a proper place to get a breakthrough in SAP ABAP
Thanks and Regards
Samit Sarkar

Hello,
Welcome to the world of SAP ABAP! There is plenty of work at the moment, so you've chosen a good time to start.
I've been doing it for over 10 years, and I would recommend it to anybody.
As for your questions:
1) The best way to break into ABAP is do the courses BC400 and BC401. Then try to find a job where you can gain experience
2) These courses are held all the time
3) No special degree is required, you just need to know how to program BEFORE you try to learn ABAP
4) SAP is used all over the world, so don't worry about specific locations
Once you have done the training and have some on-the-job experience, then you should try to achieve certification.
hope this helps
Paul Bakker

I have a Macbook Air. What is the advantage of getting an Ipad?

I would like to know if there is any advantage to getting an Ipad. I have the Macbook Air....does this do everything that the Ipad would do?

It does much more than the iPad can do. If you have the money to spend - and you need even more portability - or if you just have to have the latest tech thing - buy an iPad. You certainly do not need one if you have the MBA.
But you were a "I just have to have the latest thing" type of person, I assume that you would have bought an iPad by now. If you get the urge, go to an Apple Store or anywhere that sells iPads and check one out for yourself and see what you think about it.

Hi there. I am in the process of choosing a laptop to load elements 11 on.Putting minimum requirements aside, is there any advantage in getting a dedicated as opposed to an integrated graphics card, would it run faster on an i5 as opposed to an i3 process

Hi there. I am in the process of choosing a laptop to load elements 11 on.Putting minimum requirements aside, is there any advantage in getting a dedicated as opposed to an integrated graphics card, would it run faster on an i5 as opposed to an i3 processor and does a screen resolution of more than 1024 x 768 make any diference in elements 11? What should I be looking for to enable elements 11 to work efficiently without over specing? thanks folks !

PSE doesn't make big demands on the graphics card, but you want a screen that is at least 800 px tall to be able to use all the features. Some things, like the raw converter, may not appear at less than that.

How to get internal table from SAP Data Provider C#

Hello.
ABAP:
   DATA: lt_t001 TYPE TABLE OF t001.
   DATA: url(1000) TYPE c.
SELECT * INTO TABLE lt_t001 FROM t001.
CALL FUNCTION 'DP_CREATE_URL'
    EXPORTING
      type                 = 'APPLICATION'
      subtype           = 'X-R3TABLE'
    TABLES
      data                 = lt_t001
    CHANGING
      url                    = url
    EXCEPTIONS
      OTHERS           = 4.
C#:
using SAPDataProvider;
using SAPTableFactoryCtrl;
public void SetDataFromUrl(string url)
            SAPDataProviderClass p = new SAPDataProviderClass();
            p.SetDataFromURL("APPLICATION", "X-R3TABLE", url);
            ISapDPR3Table tbl = p.GetDataAsR3Table("APPLICATION", "X-R3TABLE");
            SAPTableFactoryClass tf = new SAPTableFactoryClass();
            Table tb = (Table)tf.NewTable();
            tb.ISAPrfcITab = tbl.DataTable; // Exception !!!!!!
How to get internal table from SAP Data Provider ?

Hi Sergey,
I'm trying to do the same, have you found a solution to solved it?
thanks for your help.
Regards.
Jonathan

In sap project who get lot of oppurtunities,sap abapers or sap bw people?

hi all
in general sap project in sap project who get lot of oppurtunities,sap abapers or sap bw people?
thanks,

Hi,
It depends on the based on the clients/customer business process & scenario's ,& the type of SAP Projects to be implemented .
In Business intelligenc projects, we do require more BI Consultants compare to ABAP er's & other consultants.In ECC 6.0 & other R/3 implementaions, the demand for ABAP er's & other consultants wil be more .
So finally the Vacancies are the part & parcel of the type SAP projects to be implemented.
Regards
CSM Reddy

In sap project who get lot of vacancies,sap abapers or sap bw people?

hi all
i want to know in sap project who get lot of vacancies,sap abapers or sap bw people?
thanks

Hi,
It depends on the based on the clients/customer business process & scenario's ,& the type of SAP Projects to be implemented .
In Business intelligenc projects, we do require more BI Consultants compare to ABAP er's & other consultants.In ECC 6.0 & other R/3 implementaions, the demand for ABAP er's & other consultants wil be more .
So finally the Vacancies are the part & parcel of the type SAP projects to be implemented.
Regards
CSM Reddy

What is advantage of using Visual Composer In SAP

Hi friends,
please tell me what is advantage of using visual composer in SAP.
and please give me basic notes to understand Visual Composer.
I Don't have any idea about this topic.
please help me.
Thanks & Regards,
Yogesh

Hi Yogesh,
SAP Visual Composer is a browser based, graphical modeling tool that - by reusing existing data services like RFCs, web services, queries, query-views, tables - allows creating business applications with both transactional and analytical services seamlessly integrated. In addition it gives modelers the choice to select the UI technology and build user interfaces.
Go through the following links:
Getting Started with Visual Composer for SAP NetWeaver 7.0 [original link is broken]
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/media/uuid/6cb05174-0701-0010-448b-caf8c6fcc97a
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/2e254377-0c01-0010-9787-b285e9af529f
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/ceea45f3-0c01-0010-049c-c2b001f590fb
Reward points if helpful.
Regards,
Renuka.

Get XML data into SAP

Hi ,
Is there any function module to get XML data into SAP?
If function module doesnt exist, suggest alternative to do it.
Thanks,
Shivaa...

Hi Shiva ,
there is lot of stuff regarding ur query in SDN....
anyways check this link...
https://www.sdn.sap.com/irj/scn/wiki?path=/display/abap/upload%252bxml%252bfile%252bto%252binternal%252btable
hope this solves ur problem.
Regards,
Anuj

Error when attempting to get processing resources: com.sap.aii.af.service.

Dear All,
i am getting below error in RWB in receiver Channel
Error
"Message processing failed. Cause: com.sap.aii.af.ra.ms.api.RecoverableException: Error when attempting to get processing resources: com.sap.aii.af.service.util.concurrent.ResourcePoolException: Unable to create new pooled resource: DriverManagerException: Cannot establish connection to URL 'CONNECTION STRING: NoClassDefFoundError: sun.awt.X11GraphicsEnvironment (initialization failure)"
Note: outbound has processed succesfully in both ABAP and Java Stack.

Hi,
Can you please let us know, which receiver adapter are you using??
I guess it is JDBC: IF it is ...can you check the Driver and Connection details maintained on the channel.
JDBC Driver:com.microsoft.sqlserver.jdbc.SQLServerDriver
CONNECTION:jdbc:sqlserver://IP ADDRESS:PORT;Database=HOST NAME;
-Rahul

Real Advantages of Data Integrator integrated with SAP

Hi
Can anybody please tell me what is the real advantages of Data Integrator reading from SAP R3 / ECC and performing ETL to SAP BW 7.
I do not know enough on the intergration between the two systems. I have a perspective client looking at the solotion but needs some motivation.
Thanks

I would definitely not go down that route. There is good R/3 to BW integration, without BODI in the middle. In this scenario I would see BODI as overhead only, which will slow your development down and will show your day to day load processes down. I can't see any benefit at all.
If you have complicated transformations, use ABAP in your transformations. That is much more powerful than scripting on the BODI side.
If you do use BODI you will find it a struggle first to extract data from R/3 and then to load data into BW. You probably end up creating a lot of extra objects on both sides just to make BODI work. BODI will certainly not make your load processes better performing and from a maintenance point of view I don't see any benefits at all.
Maybe in the future when BODI has a better integration with both R/3 and BW it might become useful, but at this point in time I fail to see any benefits.
I would only use BODI if I wanted to integrate data from various platforms, not for a single (SAP) platform.
I would advise against a scenario using BODI for loading R/3 to BW.
I hope this helps...
Jan.

Is knowledge of ABAP- HR advantage in getting job as a sap technical consul

Similar Messages

Maybe you are looking for