Is Mobile 2007 Stock Management Service Compatibile with R/3 4.7

Can any one tell me if I can implement Mobile Service - Service Parts management - Van stock with R/3 47 back-end
Installation guide says ERP 6.0 as a landscape requirements..
I have few questions
Can Ii implement CRM Mobile 2007 Service Module including the Vanstock with a R/3 47 Back-end
If I can what is the plug-in I use to integrate the Mobile database to CDB and to R/3
Any help will be rewarded.
Thanks
Raj

Hi Raj,
For using Vanstock scenrios on the mobile service application, SAP ECC 6.0 and SAP Netweaver Mobile 7.1 are the minimum requirements.
It cannot be implemented for any release lower than these because these functionalities/APIs are available from the mentioned releases.
Best Regards,
Pravin..

Similar Messages

  • The Remote Desktop Management service terminated with the following service-specific error %%4294967295

    Got this error after a reboot for the monthly MS hotfixes. After messing around too much, I finally found the problem and though that I would document it here since I have not found the solution anywhere I looked.
    This is in a Remote Desktop setup of two RDCB using a SQL DB that is hosted on a third server. The Remote Desktop Management service would fail to start with the "The Remote Desktop Management service terminated with the following service-specific
    error: %%4294967295" error because the SQL Server service hosting the database was offline. It had not automatically restarted after the same hotfixes. So I started the SQL server, then was able to get Remote Desktop Management to start on my RDCB without
    any delay.
    Philippe Carignan

    Hi Philippe,
    How is everything going on?
    Please check below thread for information.
    Remote Desktop Management Service, Service-specific
    error %%2284126209
    Hope it helps!
    Thanks,
    Dharmesh

  • Request management service issue with SSL Sites

    Hi guys,
    I've configured up the request management service, but after start the service on our wfe servers (even before to configure specific web applications),  our ssl sites begin to fail and the event viewer start to alert several errors, by the other hand,
    sites over 80 port with no SSL works as expected.
    I've found some similiar scenarios without a happy ending. Below you can find some of the main errors in event viewer and ULS Logs. In
    this post  solved a very similar issue using ssl host headers with a unique ip but we are using fqdn certificates so it is not an option for us.
    I've already checked the
    good posts from Spencer Harbar and He says that is good idea to use host named site collection, but this is not an option for me because we need to use Self Service Creation and mixed authetnication, besides, None of the Technet literature that i've reviewed
    says  something about don't support path based site collection.
    So far, the only way to avoid this errors is not using the service(discouraging finding), These are some errors we got on Event viewer and logs:
    Machine 'MACHINENAME (AppPool(_LM_W3SVC_515444293_ROOT))' failed ping validation and has been unavailable since '3/28/2014 3:55:48 PM'.  (Just starting the service Event viewer begis to have a bunch of this errors)
    03/28/2014 13:34:01.96 w3wp.exe (0x1184)
    0x154C SharePoint Foundation
    Request Management ai2q3
    High Reached maximum number of failed machines based on ping results for this routing group
    53c2819c-8216-20f3-68c0-c0a3e55c92d5
    03/28/2014 13:34:01.96 w3wp.exe (0x1184)
    0x154C SharePoint Foundation
    Request Management ai2q4
    Medium Unavailable machines based on ping results: MACHINENAME
    53c2819c-8216-20f3-68c0-c0a3e55c92d5
    03/28/2014 13:34:01.97 w3wp.exe (0x1184)
    0x1C2C SharePoint Foundation
    Request Management adc7u
    Medium Mapping URI from 'https://HOSTNAME:443/Style Library/somos-sura-css/inicio/inicio.css' to 'https://MACHINENAME/Style%20Library/somos-sura-css/inicio/inicio.css'
    53c2819c-8217-20f3-68c0-cb2f392c388b
    Seems like it tries to find a site with the machine name, not the host name registered in the Alter access mappings (like portal.acme.com) .
    I would appreciate some feedback about this. Another posts with similar issues:
    http://amolmeshe.blogspot.com/2013/05/sharepoint-2013-request-management.html 
    http://www.akspug.org/Blog/Post/4/Request-Management-and-Error-8316 
    Regards,

    Hi,
    According to your post, my understanding is that you had an issue about the Request management service with SSL sites.
    It’s a known issue that the request management service could not work with the SSL site.
    We had already reported the issue to the product team, as a workaround, if you want to use the request management service, you can change the https site back to http.
    What’s more, the SharePoint 2013 SP1 has been relased, you can install it to check whether it works.
    http://support.microsoft.com/kb/2817429/en-us
    Thanks & Regards,
    Jason
    Jason Guo
    TechNet Community Support

  • Ws manager service fails with non-soap-response

    I try to set up a service in wsm. Gateway, policy and service are defined via the defaults.
    I can access my original service via BPEL and via the WSM test page, but calling the wsm service fails
    with a non-soap-response error :
    <SOAP-ENV:Envelope xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/"><SOAP-ENV:Body><SOAP-ENV:Fault><faultcode xmlns:p="http://schemas.oblix.com/ws/2003/08/Faults">p:Client.GenericFault</faultcode><faultstring>Service gibt Nicht-SOAP-Response zurück</faultstring><detail/></SOAP-ENV:Fault></SOAP-ENV:Body></SOAP-ENV:Envelope>
    This is returned by the original web service :
    <?xml version="1.0" encoding="UTF-8" ?>
    <env:Envelope xmlns:xsd="http://www.w3.org/2001/XMLSchema"
    xmlns:env="http://schemas.xmlsoap.org/soap/envelope/"
    xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
    <env:Body>
    <n1:SendMessageResponse xmlns:n1="urn:ActionWebService"
    env:encodingStyle="http://schemas.xmlsoap.org/soap/encoding/">
    </n1:SendMessageResponse>
    </env:Body>
    </env:Envelope>
    What is going wrong here ?

    I try to set up a service in wsm. Gateway, policy and service are defined via the defaults.
    I can access my original service via BPEL and via the WSM test page, but calling the wsm service fails
    with a non-soap-response error :
    <SOAP-ENV:Envelope xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/"><SOAP-ENV:Body><SOAP-ENV:Fault><faultcode xmlns:p="http://schemas.oblix.com/ws/2003/08/Faults">p:Client.GenericFault</faultcode><faultstring>Service gibt Nicht-SOAP-Response zurück</faultstring><detail/></SOAP-ENV:Fault></SOAP-ENV:Body></SOAP-ENV:Envelope>
    This is returned by the original web service :
    <?xml version="1.0" encoding="UTF-8" ?>
    <env:Envelope xmlns:xsd="http://www.w3.org/2001/XMLSchema"
    xmlns:env="http://schemas.xmlsoap.org/soap/envelope/"
    xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
    <env:Body>
    <n1:SendMessageResponse xmlns:n1="urn:ActionWebService"
    env:encodingStyle="http://schemas.xmlsoap.org/soap/encoding/">
    </n1:SendMessageResponse>
    </env:Body>
    </env:Envelope>
    What is going wrong here ?

  • SCCM 2007 AND Managing Laptop Connected with NetMotion (VPN) and Chameleon Cellular Connections

    We could use some assistance if anyone is doing any of this.
    We have mobile laptops that are used out in the field:
    They have SCCM client
    Netmotion VPN
    Chameleon Celluar Connections
    Two things:
    1) Is there a piece of SCCM 2007 currently that could manage these (we see SCCM Mobile--but that appears as like smart phones, iphones, ipads, etc).  These are toughbooks (panasonic laptops) and they need to utilize several applications) .  We
    need to manage these differently than laptops with Direct Access. 
    2) We do not want these people receiving SCCM pushes or inventory or WSUS (this is done through our WSUS server) pushes while on cellular network.  When they come back from the field and hit our wireless or connect via network, we would like them to
    receive these types of pushing throughout the night.  Problem:  They set up and configured the laptops to make this cellular Chameleon appear as a fast network and doesn't appear as a device off these laptops.  Several pushes are reg advertisements;
    although we are moving to mostly task sequences.  Which most of you know a regular advertisement will allow us to stop on a slow network, but the task sequence advertisement does not have those capabilities.  So we are in a dilema.  Again that
    only took care of pushes and not all the other things SCCM related we do not want to happen.
    How do others handle remote toughbooks in the field on cell connections where the techs want them to appear as fast connection, yet stop SCCM packages from delivering on them or anything like inventory being done on them.
    Techs are investigating a rule on Netmotion that we might put in place, we have also thought if setting up a boundary on SCCM related to these Netmotion machines being as 10.0.0.x being slow, but we are unsure how to stop everything or write a correct rule
    to stop anything SCCM related while NOT connected via network or wireless? 
    Ideas, thoughts, pieces of SCCM 2007 that we have no invesigated, etc?

    Yes, I know this is an old post, but I’m trying to clean them up.
    Honestly, I would look at CM12 for this. CM12 added a number of features for the exact issue.
    Garth Jones | My blogs: Enhansoft and
    Old Blog site | Twitter:
    @GarthMJ

  • Remote Desktop Management service not starting. service-specific error: %%2284126209 - Event ID: 7024

    Hi Forum members,
    We have a client that has intermittent issues with RDS on a 2012 R2 server.
    As an overview of the environment, the client has a single VMWare host support 2 x Windows 2012 R2 VMs one is the File/Print/Email server and the 2nd is the RDS server used to allow the client to run MYOB Enterprise. Both servers have the AD DS role and
    DNS roles amongst others.
    The 1st issue is that the RD Connection Broker shows the error: "The server pool does not match the RD Connection Brokers that are in it. and then "1. Cannot connect to any of the specified RD Connection Broker servers".
    The above issue seems to be caused by the RDMS service not starting. When you attempt to start it, the service stops and the error in the title is logged in the "System" event log. Full transcript below:
    Log Name:      System
    Source:        Service Control Manager
    Date:          21/01/2015 4:50:32 PM
    Event ID:      7024
    Task Category: None
    Level:         Error
    Keywords:      Classic
    User:          N/A
    Computer:      intentionally removed.local
    Description:
    The Remote Desktop Management service terminated with the following service-specific error: %%2284126209
    Event Xml:
    <Event xmlns="
      <System>
        <Provider Name="Service Control Manager" Guid="{555908d1-a6d7-4695-8e1e-26931d2012f4}" EventSourceName="Service Control Manager" />
        <EventID Qualifiers="49152">7024</EventID>
        <Version>0</Version>
        <Level>2</Level>
        <Task>0</Task>
        <Opcode>0</Opcode>
        <Keywords>0x8080000000000000</Keywords>
        <TimeCreated SystemTime="2015-01-21T05:50:32.129949400Z" />
        <EventRecordID>53721</EventRecordID>
        <Correlation />
        <Execution ProcessID="568" ThreadID="12436" />
        <Channel>System</Channel>
        <Computer> intentionally removed.local</Computer>
        <Security />
      </System>
      <EventData>
        <Data Name="param1">Remote Desktop Management</Data>
        <Data Name="param2">%%2284126209</Data>
        <Binary>520044004D0053000000</Binary>
      </EventData>
    </Event>
    In addition in the "Application" event log, the following error is logged:
    Log Name:      Application
    Source:        MSSQL$MICROSOFT##WID
    Date:          21/01/2015 5:24:47 PM
    Event ID:      18456
    Task Category: Logon
    Level:         Information
    Keywords:      Classic,Audit Failure
    User:          NETWORK SERVICE
    Computer:      intentionally removed.local
    Description:
    Login failed for user 'NT AUTHORITY\NETWORK SERVICE'. Reason: Could not find a login matching the name provided. [CLIENT: <named pipe>]
    Event Xml:
    <Event xmlns="
      <System>
        <Provider Name="MSSQL$MICROSOFT##WID" />
        <EventID Qualifiers="49152">18456</EventID>
        <Level>0</Level>
        <Task>4</Task>
        <Keywords>0x90000000000000</Keywords>
        <TimeCreated SystemTime="2015-01-21T06:24:47.000000000Z" />
        <EventRecordID>4228336</EventRecordID>
        <Channel>Application</Channel>
        <Computer>intentionally removed.local</Computer>
        <Security UserID="S-1-5-20" />
      </System>
      <EventData>
        <Data>NT AUTHORITY\NETWORK SERVICE</Data>
        <Data> Reason: Could not find a login matching the name provided.</Data>
        <Data> [CLIENT: &lt;named pipe&gt;]</Data>
        <Binary>184800000E0000001F00000055004E0047004500520045005200410055005300530056005200300033005C004D004900430052004F0053004F0046005400230023005700490044000000070000006D00610073007400650072000000</Binary>
      </EventData>
    </Event>
    I have been attempting to resolve these errors for some time, without success. I have read the many KBs and forum entries related to the above and applied a number of the suggested fixes, including the one which suggests to add the NT SERVICE\ALL SERVICES
    to the "Logon as a Service" in the "User Rights Assignment" of the "Default Domain Policy" which is linked to the domain level, that both servers are objects of.
    My question to the forum is, can anyone come up with a solution to resolve the above issues and all the RDMS service to start which will then hopefully resolve the broker error?
    Regards,
    David West.

    Hi David,
    If virtual machines on the server are Windows Server 2012, then it is not supported to install Remote Desktop Connection Broker on a Domain Controller.
    More information for you:
    Remote Desktop Services role cannot co-exist with AD DS role on Windows Server 2012
    http://support.microsoft.com/kb/2799605/de
    Guidelines for installing the Remote Desktop Session Host role service on a computer running Windows Server 2012 without the Remote Desktop Connection Broker role service
    http://support.microsoft.com/kb/2833839
    If the VMs are Windows Server 2012 R2, I suggest you install RDS on a separate machine to see if the issue persists.
    Best Regards,
    Amy
    Please remember to mark the replies as answers if they help and un-mark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

  • Do Group Managed Service Accounts require permissions to run service in question?

    I'm testing out GMSA (Group Managed Service Accounts) in Windows 2012 R2. My domain and forest functional level is 2008 R2 (which I understand is the minimal functional level for GMSA support). 
    Question I have is if I create a new GMSA for a particular service, does the GMSA require permissions to run service? For example, SQL rights, IIS rights, etc...
    Also, can they be used to run scheduled tasks? Thanks.

    a gMSA is like any other service account. when you it you need to prepare for whatever the app/service requires. the you eed to think HOW to implement. the HOW focusses on if you can use gMSA for the app/service or not, because it depends on the app and
    the underlying os
    regarding scheduled task support for gMSA  see
    https://social.technet.microsoft.com/Forums/windowsserver/en-US/42273a38-05dc-4f62-b915-8f55480d59bd/how-do-i-use-a-group-managed-service-account-with-the-task-scheduler?forum=winserver8gen
    https://technet.microsoft.com/en-us/library/hh831782.aspx
    http://blogs.technet.com/b/askpfeplat/archive/2012/12/17/windows-server-2012-group-managed-service-accounts.aspx
    Cheers,
    Jorge de Almeida Pinto
    Principal Consultant | MVP Directory Services | IAM Technologies
    COMMUNITY...:
    DISCLAIMER: This post is provided "AS IS" with no warranties of any kind, either expressed or implied, and confers no rights! Always evaluate/test yourself before using/implementing this!

  • Where is  mobile stock management customizing guide ?

    Hello
    For CRM 2007 mobile stock management in Mobile service. Netweaver 7.1 mobile is mandatory. However, I could not find the IMG guide for this area. Such as connectivity setup between that and CRM or backend ECC. Has anyone done that part?
    Thanks
    Ming

    Hi Abishek
    I have read that part of the document. But that is more of a user guide. It describes the functionality. But what I need is how to implement the functionality.
    There is additional middleware component involved in this scenario, Netweaver mobile 7.1 DOE. But we can't find any document on setup and customizing. There are only few hints in release notes which does not give  us a good picture. So if you have seen this scenario working please let me know. Any hint is helpful
    Thanks
    Ming

  • Looking for help - Company is going to Mobile Asset Management service that does not support BB - especially BB 10.

    Hello,
    I am looking for ideas/help. I currently have a BB Z10 (10.1.0.2039) with Verizon Wireless.  The company has a BB Enterprise Server for older devices (I previously was on that).  I bought a Z10 several months ago and have been connecting to the corporate network through Lotus Traveler. They do not have and will not implement a BB 10 Enterprise Server. Some in IT informed that if the company used the BB software they could manage all devices..... not accepted.
    All my contacts, calendar, and company email is funneled to the BB Hub.....
    So my company is implementing a Mobile Asset Management Service that I have to sign up for (Airwatch?).  They only support Android and IPhone.
    Will future versions of the BB OS support Android Apps.... Soon (I have less than 2 weeks)
    I have read where it is possible to put the device in development mode to run Android Apps.  I don't know if that will work with this and have no idea how stable the phone is in that mode. I travel internationally so I don't know how a development mode would work overseas. Any thoughts?
    I like my Z10 but will need to switch to keep functionality if I can't find a work around 
    Any assistance ????
    Thanks for any help.

    Hi and Welcome to the Community!
    BB10 devices have the ability to run .apk apps via special methods. Development Mode is used only for installing the app...not for normal operation. So you install (side-load) the app in Development Mode, then go back to normal mode for normal operations.
    If a .bar file for the .apk app already exists somewhere, you can side load it to the BB10 device and see if it works or not. If there is not yet any .bar file, there is an app called SideSwype that can convert many .apk apps to .bar and install it to your device.
    Good luck!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • IPS Tech Tips: IPS Best Practices with Cisco Remote Management Services

    Hi Folks -
    Another IPS Tech Tip coming up and this time we will be hearing from some past and current Cisco Remote Services members on their best practice suggestions. As always these are about 30 minutes of content and then Q&A - a low cost high reward event.
    Hope to see you there.
    -Robert
    Cisco invites you to attend a 30-45 minute Web seminar on IPS Best   Practices delivered via WebEx. This event requires registration.
    Topic: Cisco IPS Tech Tips - IPS Best Practices with Cisco Remote Management   Services
    Host: Robert Albach
    Date and Time:
    Wednesday, October 10, 2012 10:00 am, Central Daylight Time (Chicago,   GMT-05:00)
    To register for the online event
    1. Go to https://cisco.webex.com/ciscosales/onstage/g.php?d=203590900&t=a&EA=ralbach%40cisco.com&ET=28f4bc362d7a05aac60acf105143e2bb&ETR=fdb3148ab8c8762602ea8ded5f2e6300&RT=MiM3&p
    2. Click "Register".
    3. On the registration form, enter your information and then click   "Submit".
    Once the host approves your registration, you will receive a confirmation   email message with instructions on how to join the event.
    For assistance
    http://www.webex.com
    IMPORTANT NOTICE: This WebEx service includes a feature that allows audio and   any documents and other materials exchanged or viewed during the session to   be recorded. By joining this session, you automatically consent to such   recordings. If you do not consent to the recording, discuss your concerns   with the meeting host prior to the start of the recording or do not join the   session. Please note that any such recordings may be subject to discovery in   the event of litigation. If you wish to be excluded from these invitations   then please let me know!

    Hi Marvin, thanks for the quick reply.
    It appears that we don't have Anyconnect Essentials.
    Licensed features for this platform:
    Maximum Physical Interfaces       : Unlimited      perpetual
    Maximum VLANs                     : 100            perpetual
    Inside Hosts                      : Unlimited      perpetual
    Failover                          : Active/Active  perpetual
    VPN-DES                           : Enabled        perpetual
    VPN-3DES-AES                      : Enabled        perpetual
    Security Contexts                 : 2              perpetual
    GTP/GPRS                          : Disabled       perpetual
    AnyConnect Premium Peers          : 2              perpetual
    AnyConnect Essentials             : Disabled       perpetual
    Other VPN Peers                   : 250            perpetual
    Total VPN Peers                   : 250            perpetual
    Shared License                    : Disabled       perpetual
    AnyConnect for Mobile             : Disabled       perpetual
    AnyConnect for Cisco VPN Phone    : Disabled       perpetual
    Advanced Endpoint Assessment      : Disabled       perpetual
    UC Phone Proxy Sessions           : 2              perpetual
    Total UC Proxy Sessions           : 2              perpetual
    Botnet Traffic Filter             : Disabled       perpetual
    Intercompany Media Engine         : Disabled       perpetual
    This platform has an ASA 5510 Security Plus license.
    So then what does this mean for us VPN-wise? Is there any way we can set up multiple VPNs with this license?

  • Thinking of switching to t-mobile. Way cheaper service for 2 lines. Anyone have experience with them?

    T-mobile will give me 2 lines with unlimited calls, text, and data (slow data after 1 gig) for $80 per month. I'm paying about $160 now for 2 lines with 4 gigs.  I'm pretty sure I'm going to give t-mobile a try but wanted to know if anyone has tried them and then come back to verizon. 

    Actually I don't set my expectations too high.
    T-Mobile is bleeding money. They have raised their service rates, taking away corporate discounts for new customers, and basically are using gimmicks to gain short term revenue to just stay in the game.
    The Wall Street Journal has stated Verizon and AT&T are on stable footing and have loads of customers and cash.
    Sprint although having growing pains has all the Soft-bank capital it needs so that leaves T-Mobile who although maybe shaking up the industry are set to fail. They are in huge debt and borrowed against their stock, cash poor and the gimmicks they are using are short term.
    Billing should be cut and dry. If I buy a service for $70 plus taxes and surcharges it then becomes $82 take away 15% corporate discount makes it $70 total each month. That is not rocket science.
    I pay the same invoice to Verizon each month and it never changes except for a few pennies.
    Not $70 this month, $85 next month, change the bill date mid stream and then have to pay -/+ $$ because of the bill change date etc. you get the point.
    I am not a supporter of T-Mobile on any level. Terrible service and terrible coverage. I am thankful we just tried them for our spare line. They were the worst.
    Good Luck

  • Unable to refresh the schema of FIM MA.Getting an error in Event viewer ""the current version of database is not compatible with the one expected by Forefront Identity Manager service. The current version of database is : 1116. The expected version is :1"

    Hi,
    We have installed FIM MA with an account that have all the sufficient rights.It got created successfully and worked for Full Import and Full Sync. But, due to some version incompatabilities, we have installed a patch.PFB link for the patch.
    http://support.microsoft.com/en-us/kb/2969673/en-us
    Now, we are trying to refresh the schema of FIM MA. While doing that we are facing an error "Failed to connect to database". The user account with which we are connecting has read and write permissions on DB.In the event viewer some errors are
    logged like  "the current version of database is not compatible with the one expected by Forefront Identity Manager service. The current version of database is : 1116. The expected version is :1122" with event ID 3. PFB images for more detailed
    view.
    Please advice how to fix the issue.
    Thanks
    Prasanthi.

    Hello,
    seems to me that you maybe only updated the syncengine but not portal/webservice.
    I had that error once after an recovery from scratch and forgot one of the hotfixes to apply to all services.
    -Peter
    Peter Stapf - ExpertCircle GmbH - My blog:
    JustIDM.wordpress.com

  • A problem with email alerts in management services of Azure portal

    Hi,
    I have created an alert with email notification on a custom performance counter using the management services of Azure portal.
    Currently the alert is in active state (and has been so for several hours), but i haven't received any email.
    Can someone please advise on this issue?
    Thanks,
    Roi

    Do you have an endpoint for the service. To enable endpoint monitoring, go to the
    dashboard page for the associated resource and edit the
    Endpoints setting in the
    monitoring section, see figure 1. If you have an endpoint, try disabling and enabling the alert in the management tab.
    figure 1.
    Johnny Coleman [MSFT] Any code posted to this Forum is [As-Is] With No Warranties

  • Integration with solution manager 4.0 - service desk with XI ?

    Hello Experts,
         Does any one know how to integrate the solution manager 4.0 - service desk with SAP XI. I read the solution manager 4.0 service desk web service api, but it only has the XSDs. If any one can provide me any step by step procedure for creating the webservice through this api and publishing it....WILL DEFINETLY BE REWARDED.
    Thanks,
    Raju.

    Hello,
    I have the same task.
    At SolMan side I made:
    - released the web service
    - Create logical port
    - Create HTTP connecto to 3th party ServiceDesk
    But I don't understand the "Configure Interface to Solution Manager Service Desk" step.
    What was Your problem?
    Regards,
    Gusztá

  • The Web Management Service service terminated with service-specific error %%-2147483640,

    We've been able to successfully, automatically, deploy our MVC and WebApi to IIS7.5 on Win2008 R2, for some time now.  Just this week the MSDeploy stopped working.  The System event log shows this error when attempting to restart the Web Management
    Service on the targeted Win200 R2 server:
    The Web Management Service service terminated with service-specific  error %%-2147483640.
    The Application log shows this error at the same exact time the above error occurs.
    IISWMSVC_STARTUP_UNABLE_TO_ACTIVATE_HWC
    Failed to activate the Hostable Web Core (HWC). Web Management Service startup failed.  Please reference the Win32 error in this  event for further information.  Exception:System.Runtime.InteropServices.COMException (0x8007007F):  The
    specified procedure could not be found. (Exception from HRESULT:  0x8007007F)    at  System.Runtime.InteropServices.Marshal.ThrowExceptionForHRInternal(Int32  errorCode, IntPtr errorInfo)    at  Microsoft.Web.Management.Server.WebServer.Microsoft.Web.Management.Server.Interop.IWebServer.Start() 
    Process:WMSvc User=NT AUTHORITY\LOCAL SERVICE
    The above error is preceded by this warning:
    A listener channel for protocol 'http' in worker process '7164' serving application pool 'WMSvcAppPool' reported a listener channel  failure.  The data field contains the error number.
    Which is preceded by this error:
    Failed to find the RegisterModule entrypoint in the module DLL C:\Windows\Microsoft.NET\Framework64\v4.0.30319\webengine.dll.  The  data is the error.
    We've attempted to reach the target server using https://ourservername:8172/MsDeploy.axd. The response is:
    Error 102 (net::ERR_CONNECTION_REFUSED): The server refused the  connection
    Is this occurring because the port is blocked or because the Web Management Service is not running?  (The Windows Firewall with Advanced Security dialog says the "Windows Firewall is off" and there are no entries in the firewall log (C:\Windows\System32\LogFiles\Firewall).
    We've seen some posts that indicate the certificate may be the issue. Not sure how to actually tell if this is the case though. The CERT we have says it is valid thru 2029.

    Hi Nicola,
    seems like your web service runtime is not configured correctly. Please check out the following SAP Notes:
    Note 1043195 - Configuration of the Web service runtime
    Note 1292171 - Troubleshooting Guide: ABAP Web Services Runtime
    Kind regards
    Heiko

Maybe you are looking for

  • Jabber 9.0.2 cloud deployment and Auto-Start options

    We're getting ready to roll out Jabber 9.0.2 to about 2,000 users in a Cloud scenario (WebEx Connect + SAML).  We have our software deployment package set and tested, but we are unable to programatically tick the 'Automatically start Cisco Jabber whe

  • Exporting 'flv' files from Final Cut Pro

    Hi, I was wondering if there was such a program that would export 'flv' files straight from Final Cut Pro time line for my mac. I know that you can purchase Adobe Flash which enables this, however I don't wish to buy the whole program. Is there a vid

  • Media Queries:  Works on Mac but not Windows

    http://www.sandiegohomegrown.com/testSDTG/ I have been coding this site on my Mac and it works with Firefox, Safari, and Chrome.  I fired up the old Windows machine and it doesn't work with Safari, Firefox, or IE10.  It just ignores the media queries

  • Any date for jdeveloper 10.1.3 beta with adf features

    Hi Jdeveloper team, Is there any date we can expect the next jdeveloper 10.1.3 beta with more complete adf features ? I'm currently evaluating the technology stack+tool to use for our next project ( preferably jsf based ), the lack of an adf faces re

  • How to save .band files as MP3s

    I did a little editing in GarageBand to remove some white noise from a sound file, and I need to convert it to an MP3. Is there a way I can do that in GarageBand, and if there isn't, what would allow me to do so?