Is my AirPort Extreme base station A1034 (802.11g) compatible with Comcast 50 Mbps internet service?

The WAN port on the A1034 will handle up to a 100 Mbps Internet connection, so you are OK there.
Wireless on the A1034 is limited to 54 Mbps tops, so things should work OK as long as wireless devices can receive a strong wireless signal from the Apple router.

Similar Messages

Older airport extreme base station as a network extender with new time capsule

I just bought a new time capsule (802.11ac). Can my older airport extreme base station (model A1143) be used as a network extender with it?

Yes, although it maybe disappointing..
There are two kinds of extending.. wireless repeater type which is poorest as it has to transfer all packets in two steps instead of one.. hence will halve the speed.
Or using ethernet to the old extreme and set it in bridge.. You can then setup roaming network... this is much better.. but getting ethernet to the right place could be messy or expensive or both.
http://support.apple.com/kb/HT4260
wireless extend doco.. mind all of this is out of date.. the basics are correct.. the methods via the airport utility may be obsolete.
http://support.apple.com/kb/HT4145
Documentation has rather lagged lately.

Airport Extreme base station no longer playing nice with Mac Pro

This is a strange problem...
I have an Airport Extreme base station (purchased in 2004) that I use with verizon DSL to get a wireless network going in my house, and I connect three computers wirelessly.
I have an ipod touch and toshiba PC laptop that are both able to connect to the network and run just fine. But lately (past 2 weeks or so) when I try to connect with my MacPro desktop I can go to a few sites, but after a few minutes the airport locks up. At that point none of my computers will connect and I have to unplug and then replug the airport. At that point the network will start up again and if I do not try to get on with Mac Pro then things run fine, but when I try to connect with desktop again, after another few minutes the same thing happens.
I know the problem is with the airport and my Mac Pro - I have done numerous connection experiments and have narrowed the problem down to that.
Is it possible that my MacPro might be drawing more power and causing the airport to overheat? (it is rather hot in the room with DSL connection)
Or should I accept that the current base it old, and bite the bullet and get a new base?
Any thoughts?

Could you post what you did in order to resolve the issue. I'm having a problem with the base station in that I cannot connect to the internet with my laptops (a mac and pc) while I can connect wirelessly to my network with my desktop (G4). The base station is not detected in the base statin admin utility or the aiport setup utility. If anyone else has a solution I would be much obliged to read it.
Thanks!

Purchase of new Airport Extreme Base station??

have i wasted money on purchase of NEW Airport Extreme base station? i have fios with actiontec router and tv service. the Guest network does not work nor does Actiontec have ability to provide guest network. I am about to return the AEBS as I dont see any reason to keep it other than the 2.4 and 5GHZ network ability. Oh yeah, the 802.11 ac too.

Find a way to disable DHCP on your Actiontec router, making it a modem. Call Verizon and ask them for instructions: "I have my own router, and want to disable the Actiontec's router. How do I do that?"
Here is one such question, from Verizon's support forum: http://forums.verizon.com/t5/FiOS-Internet/Disable-Actiontech-DHCP/m-p/281653#M1 9622 Try that.
The AirPort Extreme can be configured as a bridge, i.e. not performing any router function, but you will be losing most of its advantages by doing so.
Guest Network must be created by your router.

Configure TC and Airport Extreme Base Stations with different channels

I had to do some serious workarounds to use the Airport Extreme Base Stations as an access point with the same wireless network name primarily due to channel overlap. I thought I would post my results here since I didnt' find a good article online.
Also, I found the Snow Leopard verison (5.4.2) of the Airport Setup Utility far superior to Lion's Airport Utility (6.x) in terms of advanced setup.
Setup is a 3 flloor house where the 3 wired network locations have wireless overlap. The problem was that the access points would not hand off the wireless signal because the channels for each airport/TC were automatically set to the same channel. In non-apple setups, this is how you force a wireless client to switch access points (since the wireless software on your client/mac/windows can detect which access point is stronger and moves to the alternate channel.
Using apple's "Extend this wireless network" option removes any ability to manually configure wireless channels. I am writing this from memory, so feel free to ask questions and I will track this topic:
Procedure
Setup time capsule as your base station. Do all the setup for your wireless and guest networks. Manually configure the network and change the wireless channel to a specific channel for a/b/g networks (e.g., 3) and n networks (e.g, 167).
Plug your first airport extreme/access point into your wired network. Do not plug it into the "internet" ethernet plug, use one of the 3 ethernet switch locations
Use the airport utility to first configure it to "extend" your wired network.
Then, go in and reconfigure it manually in the airport utility. Choose the option to setup a "new network" and name the network the same as the TC wireless network name, security, etc.
Change the channel from "auto" to a different channel than the TC (e.g., 6 and 137).
Now go to the top tab and click on the "internet" icon
Go to the DHCP tab and change it to "bridge mode." This will tell the AE to not give out IP addresses (the TC will do this for you). If you get an error that the IP ranges conflict, you have not done this
Note that if you have a guest network setup, you will need to set this up on the AE as well.
Now test your airport setup. Take your client (macbook, iOS device) and connect to your network. Move to a spot near the TC and pull up a web page. Keep an eye on the signal strength and beginv moving toward the AE. Refresh the page as you move around. You should at some point see the signal strength increase. Refresh your page again. You should be now connected to to the AE. I have found that Macbooks do a better job than iOS devices because you get an extra signal bar to measure strength, and they have larger antennas which allows you to better measure problems with handoff
Another test you can do is to start backing up on your TC and then test the move. The handoff will truly show you that the TC is handling the process but the AE is relaying to the TC for backup.
If you need to setup another AE, simply follow setups 3-10.
I hope this helps others. I've done this setup 100 times on Linksys devices and although they are cumbersome, they at least allow me to do this setup much more quickly and easily than the apple products.

I had to do some serious workarounds to use the Airport Extreme Base Stations as an access point with the same wireless network name primarily due to channel overlap. I thought I would post my results here since I didnt' find a good article online.
Also, I found the Snow Leopard verison (5.4.2) of the Airport Setup Utility far superior to Lion's Airport Utility (6.x) in terms of advanced setup.
Setup is a 3 flloor house where the 3 wired network locations have wireless overlap. The problem was that the access points would not hand off the wireless signal because the channels for each airport/TC were automatically set to the same channel. In non-apple setups, this is how you force a wireless client to switch access points (since the wireless software on your client/mac/windows can detect which access point is stronger and moves to the alternate channel.
Using apple's "Extend this wireless network" option removes any ability to manually configure wireless channels. I am writing this from memory, so feel free to ask questions and I will track this topic:
Procedure
Setup time capsule as your base station. Do all the setup for your wireless and guest networks. Manually configure the network and change the wireless channel to a specific channel for a/b/g networks (e.g., 3) and n networks (e.g, 167).
Plug your first airport extreme/access point into your wired network. Do not plug it into the "internet" ethernet plug, use one of the 3 ethernet switch locations
Use the airport utility to first configure it to "extend" your wired network.
Then, go in and reconfigure it manually in the airport utility. Choose the option to setup a "new network" and name the network the same as the TC wireless network name, security, etc.
Change the channel from "auto" to a different channel than the TC (e.g., 6 and 137).
Now go to the top tab and click on the "internet" icon
Go to the DHCP tab and change it to "bridge mode." This will tell the AE to not give out IP addresses (the TC will do this for you). If you get an error that the IP ranges conflict, you have not done this
Note that if you have a guest network setup, you will need to set this up on the AE as well.
Now test your airport setup. Take your client (macbook, iOS device) and connect to your network. Move to a spot near the TC and pull up a web page. Keep an eye on the signal strength and beginv moving toward the AE. Refresh the page as you move around. You should at some point see the signal strength increase. Refresh your page again. You should be now connected to to the AE. I have found that Macbooks do a better job than iOS devices because you get an extra signal bar to measure strength, and they have larger antennas which allows you to better measure problems with handoff
Another test you can do is to start backing up on your TC and then test the move. The handoff will truly show you that the TC is handling the process but the AE is relaying to the TC for backup.
If you need to setup another AE, simply follow setups 3-10.
I hope this helps others. I've done this setup 100 times on Linksys devices and although they are cumbersome, they at least allow me to do this setup much more quickly and easily than the apple products.

Please help me connect eMac, cable modem, and Airport Extreme Base Station

I connected Ethernet cord from cable modem to Airport Extreme Base Station and then another Ethernet cord from Airport Extreme Base Station to eMac, but I could not get internet access on my eMac that way. I'm only getting internet access by directly connecting eMac to cable modem. Can someone please help me with a step by step explanation of how to set these 3 machines up so that I can have internet access on both my eMac and, wirelessly, on my new MacBook. Thank you very much in advance.
eMac & MacBook Mac OS X (10.3)
eMac & MacBook Mac OS X (10.3)
eMac & MacBook Mac OS X (10.3)

jenngee, Welcome to the discussion area!
Ensure that you power off the cable modem for a minute or so when you switch it to another Ethernet device.
Ensure that you are connecting the WAN port of the AirPort Extreme base station (AEBS) to the cable modem. The eMac should connect to the LAN port.
The steps for setting this up can be found in the "Designing AirPort Networks" (direct PDF link) document. Look through that document and try to get it setup. Then return here if you have more questions. Don't forget to post what you tried and the issues you encountered.

Airport Extreme Base Station and Win 2000

I have a new Airport Extreme Base Station. All is well with my Mac but my company laptop uses Windows 2000 Pro. The software that came with my AEBS will not install I get an error that I can not install as Win XP SP2 is required. Anyone got a work around or know where I can find compatable software?

All,
I recently posted what I believe to be a similar/identical issue. See my post here: http://discussions.apple.com/thread.jspa?threadID=1378849
I have not changed my AEBS to "Off (Bridge Mode)" yet, because everything currently 'works' but I continue to get the occasional "Double NAT" warning suggesting I switch the AEBS to bridge mode. When this happens, I lose connection to the internet and need to unplugged both the AEBS and my modem to re-establish a connection to the internet and the external HD I have connected to the AEBS.
My question for Jmiller1138, do you continue to get the "Double NAT" warning even when you changed your AEBS to "Off (Bridge Mode)"? I am hesitant to change my AEBS to bridge mode since I'm assuming I'll need to totally reconfigure my entire network (meaning both the AirPort Extremes, my wireless HP printer, and my firewalls on my PCs).
The ignoring of the warning (i.e. closing the AirPort Utility without updating the AEBS) is what triggers the need to reset my AEBS and modem. Not fun.
I guess I'll just need to bite the bullet and set the AEBS to bridge mode . . . yes?

About Apple AirPort Extreme Base Station?

I Need A Wireless Router & i'm looking for Apple AirPort Extreme Base Station cause I Need a Wireless Router cause I Have at Home a Sony DVD Wireless Blue-Ray Player & i'm trying to Connect to The Internet on The Device but it's not letting me cause it say's I Have No Wireless Router to Connect to or Something? but I Connected The Sony DVD Blue-Ray Player to My 15inch Coby L.E.D LEDTV1526 HDTV & it Play's Blue-Ray Movies Excellent it just I Cannot Connect to The Internet on there cause I Need a Wireless Router & I Wanted to know if Apple AirPort Extreme Base Station is The Right Wireless Router for Me? cause I Like Apple & I Would like to Get The Apple AirPort Extreme Base Station if it's ok with what I Need it for? I Never had a Wireless Router before, I Love Sony & I Love Apple they both have Great Products on My Sony DVD Wireless Blue-Ray Player I Can Stream Movies From The Internet & I Wanna do that let me know if Apple AirPort Extreme Base Station is ok for me Please?
in My Bed Room I Have My 15inch Coby L.E.D LEDTV1526 HDTV & I Have My Optimum Cable HDTV DVR Cable HDTV Ready Connected & My Sony DVD Blue-Ray Player Connected to My 15inch Coby L.E.D LEDTV1526 HDTV But I Need a Wireless Router & is Apple AirPort Extreme Base Station right for me? all I Need now is Apple TV Next then i'm really Loaded Up.
in My Home I Have Optimum Triple Play Package Deal, I Have Cable HDTV Silver Package with Optimum DVR & Optimum Online Boost Plus for Internet & I Have My Regular Optimum Phone Service all 3 from Cablevision in My Bed Room & I Have over 2000+ DVD Movies & Music CD's & on Apple iTunes I Have almost 1000 Music & Music Video's & Almost 1000 App's for My Apple iPhone 4 32GB & Future Apple iPod Touch 64GB & I Have 32 Movies on Apple iTunes & 4 TV Shows on Apple iTunes & I Have 70 Mac App Store Mac App's from The Mac App Store
& in My Bed Room I Have My 2009 Apple 24inch iMac Computer & My Canon PIXMA MP480 All-One Photo Printer & My Apple Mouse & Apple Keyboard & My G-Technology G-Drive 1TB Drive & My Canon Powershot A2100 IS Digital Camera & My Apple iPhone 4 32GB From Verizon Wireless Connected To My 2009 24inch Apple iMac Computer so I Have lots of things going on in my Room. so have a Very Merry Christmas & Happy Holiday's & Happy New Year
If Someone did not like the way I Made this Thread i'm Very Sorry I Did it in the wrong way, I'm Sorry & I Won't do it if it was the wrong way i did it? & i'm sorry I Made the Mistake & I Just thought i would get Help on the Apple AirPort Extreme Base Station I Needed help with & I'm Sorry what i did if You did not like it, I Have not been on here often & I Only come here if I Need help with something so maybe you could let this thread slide but if not? then it's ok & i'm still Sorry I Made it & I Did not mean to make it in a bad way if thats what you thought? so have a Very Merry Christmas & Happy New Year & Happy Holiday's from your Online Friend & Costumer Byron.
Peace.

Ok after Christmas was Over I Went to PC Richard & Son & was looking for an HDMI Cable & I Found it so then I Asked them about My Sony DVD Blu-Ray Player & told them about the situation that I can stream Movies from the Internet to The Sony DVD Blu-Ray Player & then I also talked to them about a Router so after that they had Showed me The BELKIN Share N300 Wireless N' Router & they said this is The Cheapest 1 & it was $29.99 plus tax, they said that I Can Connect that to My Sony DVD Blu-Ray Player to The BELKIN Share N300 Wireless N' Router & Connect The Belkin Share N300 Wireless N' Router to My Cable Optimum Online Modem then Connect The Wire from The Optimum Cable Modem to My Computer so now My Sony DVD Blu-Ray Player can Stream Movies from The Internet & also I Have everything Conected & working great & I also have Netflix on My Sony DVD Blu-Ray Player & I Can also watch Movies on Netflix on My 24inch iMac Computer to, everything is working fine so now 1 Very Last Question & i'll leave you alone
if I Were to Buy Apple TV Can I Get a Wireless Home Networking Connection on The BELKIN Share N300 Wireless N' Router? or is it only can Work on an Apple Airport Extreme Base Station?
I Hope you had a Happy New Year ok take care from Byron.

Can Airport Extreme Base Station 802.11g Connect To Park's Free WiFi?

The RV resort where I'm staying has free WiFi for Internet connections. It shows up on my iBook's Airport list of possible networks in the menu bar, along with my own local network which is an older Airport Extreme Base Station (white dome 802.11g) which has my HP printer plugged into it via an ethernet cable.
However, when I am connected to the park's WiFi via the laptop's Airport network choices, I am NOT connected to my AEBS, and therefore cannot print to the printer wirelesslessly. Is there a way for the AEBS to make the connection to the park's WiFi so I can use both Internet and printer from my iBook G4 without having to switch from one network to use the other?

Is there a way for the AEBS to make the connection to the park's WiFi so I can use both Internet and printer from my iBook G4 without having to switch from one network to use the other?
Sorry, but no. You cannot connect your iBook's AirPort to more than one wireless network at a time. Since it will be highly unlikely that you will be able to create a Wireless Distribution System (WDS) between your RV resort's Wi-Fi and the 802.11g AirPort Extreme Base Station (AEBS), you won't be able to extend it to meet your needs.

I have a AirPort Extreme Base Station with Gigabit Ethernet 802.11n ?

I have the 802.11n Airport Extreme Base it went bad so Apple Sent me a new one to put into my
office where I have a iMac 24" 2.4ghz with really fast internet
I also HAD a AirPort Express Base Station with 802.11g and AirTunes G not N so when I received the
new 802.11n Airport Extreme I sold the Airport Express 802.11g now my Macbook Pro 17" 2.33mhz
which is in my family room and that is also where the Airport Express with iTunes was located
now my internet is like really slow on the MBP 17" I have 5 bars in the pizza menu bar but my
internet speed is really BAD on the MBP 17" and I have 16mg speed on the net
+BIG ? DO I NEED TO BUY A 802.11n AirPort Express Base Station with 802.11n and AirTunes??????+
TO EXTEND THE RANGE OF MY AirPort Extreme Base Station with Gigabit Ethernet Which is in my
Office where my iMac 24" 2.4ghz is located and the internet zooms on the iMac but not my
my Macbook Pro 17"
Please help as I don't want to spend money on another 802.11n if it will not extend
I
Message was edited by: macman60

So you agree to the lose of the Airport Express removal has caused me to lose enough of a signal to make the Internet...
Sorry but I'm not sure what this long run-on sentence is trying to say.
You asked if the network could be wirelessly extended and that is what I replied to.

Apple AirPort Extreme Base Station A1521 update to 802.11ac Final?

The new Apple AirPort Extreme Base Station A1521 is 802.11ac draft. Will it be able to update to the final 802.11ac spec once it's published?

If it is a firmware update that is required, then likely yes....my opinion. If it is a hardware update that is required, Apple will have to answer that one.
In the past, the draft specifications were in fact adopted without change. No one here can predict the future though.
We'll just have to wait....since we cannot really discuss future products on this support forum.

Is a very hot AirPort Extreme Base Station 802.11n normal?

Is a very hot AirPort Extreme Base Station 802.11n normal?
W.W.

Warm, yes
If it's uncomfortable to the touch, no.
Makes sure the device has plenty of air all around and that it does not have anything on top of it.
It's still hot, then you should contact Apple for a replacment.

802.11n + Airport Extreme Base Station: Questions?

I'm no aficionado on wireless technology but I thought the new 802.11n spec was just a draft and nothing was set in stone, so how can Apple upgrade and sell products to this spec??
Is anyone of the opinion that a lot of the post 10.4.8 wireless connectivity problems being experienced by a lot of iMac and Pro intel-mac users is to do with Apple trying to roll out SW and HW that conform to this new spec instead of, in the first instance, ensuring robust solutions with the common 802.11g protocol with their new intel range? In effect, are they trying to run before they can walk with this?
Would having a new Airport Extreme Base Station thus Airport Extreme card upgraded to be 802.11n compatible, instead of a 3rd party modem/router at 802.11g solve all these connectivity problems, or, is anyone else experiencing the same problems with the new Base Station and 802.11n enabled card??
Lastly, is anyone aware if apple intend to upgrade and release a new [plugin] Airport Express Base Station compatible with the new 802.11n draft?
I have two AE's acting as print servers and powering remote speakers; would enabling my 17” iMac C2D to 802.11n affect output to the Airport Express base stations???
Luke
17" iMac Intel Core Duo, 2.16, 2G RAM Mac OS X (10.4.8) ADSL Nation X-Station Modem/Route; 2 x Airport Express Base Stations
17" iMac Intel Core Duo, 2.16, 2G RAM Mac OS X (10.4.8)
17" iMac Intel Core Duo, 2.16, 2G RAM Mac OS X (10.4.8)

I too do not see why the rush to Draft N when the specs might change enough to make a substantial purchase worthless once the standard is finalized. I have read too many articles mentioning that the current technology isn't worth it just yet.
Furthermore, many people are buying Draft N networking thinking that it will give them a huge boost in their internet. Since even the slower 802.11G is faster that what most ISPs provide, no one will see faster downloads. The main benefits are range and speeds on your local area network - that is in transferring files from one computer to another.
It is possible that the problems some users are seeing is due to the cards Draft N status, but I do not think so. If that were the case, we would be seeing a lot of complaints in the PC world since they are using the same equipment and I haven't seen complaints there.
Since 802.11N is 802.11N it should not make a difference whether it is Apple or D-Link or any other brand, but as a draft standard there are variations in the implementation that I have read about in the PC world. Some routers are better than others and some should just be avoided.
Apple doesn't allow us to speculate here, but I am sure that sooner or later Apple will update the Airport Express to Draft N as well.
Updating your iMac to Draft N should not make a difference at all with your current setup.

Define static IP for both LAN and W-LAN devices with an Airport Extreme Base Station

Hey guys,
I have a lot of different devices connected to my Airport Extreme Base Station (5th Gen) either wirelessly or via ethernet cable. Since I control some of them via VNC and currently have to find the corresponding IP-addresses through trial-and-error, I'd like to define static IP-addresses for the computers in question. My network consists of a cable modem connected to a TP-Link WR1043ND router in the basement, from which an ethernet cable leads to the WAN-port of the aforementioned Airport Extreme Base Station on the 2nd floor. Two of the devices I want to remote-access are wired to a D-Link DES-1005D switch, which in turn is connected to the 1st ethernet port of the Airport Base Station. The remaining 3 remote clients are connected over 802.11n. All computers run Windows.
My problem now is that even though I was able to define static IP-addresses employing the "DHCP only" router mode, this didn't seem to work for the two computers connected via ethernet. Not only did I lose any internet connectivity with those, I even lost the ability to remote-connect to them using the VNC-viewer.
The question now is: how do I specify static IP-addresses for my ethernet devices correctly?
I hope you can help me.

My network consists of a cable modem connected to a TP-Link WR1043ND router in the basement, from which an ethernet cable leads to the WAN-port of the aforementioned Airport Extreme Base Station on the 2nd floor.
If you read the information in the other post, my answer would be the same here.
The Router Mode of DHCP Only is rarely used, and would only really be appropriate if your ISP was providing you with a fixed bank of multiple fixed or static IP addresses to use. This does not appear to be the case in your post.
If this were the case, the first IP address would be used as a Static IP address for your connection, and other devices on your network would receive the other fixed IP addresses.
99%+ of the time, you would use the Router Mode setting of DHCP and NAT on a network when you want the AirPort to perform as the main router for the network.
But......your post also indicates that you have another router upstream on your network from the AirPort Extreme. You would not want to run two routers in series on a network. That explains the problems that you are having.
The AirPort Extreme needs to be configured in Bridge Mode. It cannot be the "main" router on your network when you already have another router on the network. That is a fundamental networking rule.

How can I extend a wireless network with my AirPort Extreme Base Station?

Today I purchased a brand new, dual-band base station to replace my Belkin N router, as I have had a handful of firewall, coverage, and other networking problems in my house lately. First off, I really like this router and it was very easy to setup. My MacBook Pro could use both bands and established a 300 Mbit/s link very quickly. After tweaking various settings to my liking, I was also able to maximize the connections on many of my non-Apple machines and devices. I noticed that the range of its network was better than my Belkin's, but unfortunately, it failed to completely saturate the area sufficiently. Since the Belkin still works well enough, I was hoping I could bridge them together one way or the other.
The Belkin router does not support any bridge mode that I know of, but the AirPort Extreme should be able to join a wireless network and then extend that over WiFi and Ethernet, correct? I would like to place them at opposite ends of my home so I can get strong WiFi signals everywhere inside. However, when I try to get the base station to connect to my preexisting WiFi connection, it tells me that I can't extend the network and fails to join.
So is this possible? And if it is, how would I go about setting it up? I know it would probably be easier if I had a simple range booster such as an AirPort Express, but I didn't buy one while I was at Fry's since I hoped I could make use of the older Belkin. This is its product page, if needed. Thanks for any suggestions.
-MacUser

The Belkin router does not support any bridge mode that I know of, but the AirPort Extreme should be able to join a wireless network and then extend that over WiFi and Ethernet, correct?
Sorry, but no. The AirPort Extreme Base Station cannot "join" a network like the AirPort Express or Time Capsule, but you wouldn't want to do this anyway because in this configuration these devices will only perform as wireless clients ... not routers.
Instead, the AirPort Extreme can either be extended or can extend another 802.11g or 802.11n AirPort ... or a very very few non-AirPort devices.
One option for your Belkin would be to connect it to the AirPort Extreme by Ethernet but this may not meet your requirements or be a desirable situation. Otherwise, you would need to get another AirPort to extend your current one.

Is my AirPort Extreme base station A1034 (802.11g) compatible with Comcast 50 Mbps internet service?

Similar Messages

Maybe you are looking for