Is my Mac pro being cleaned and updated when the little wheel turns?

Is the little wheel a good thing when it's moving? It seems to be cleaning or updating.Or is someone trying to hack me? Whoever wants to answer I'll appreciate it:)

If you have a 5770 gpu there is no DVD to boot from (one reason to have Lion).
If you clone your system, you have a safety net, and CCC can do a file integrity checksum on copies.
If you reinstall, don't install on the same drive, keep it for backup.
Later you may need or want to do a 3-way write (writing zeroes is not guarantee it will map out bad sectors which can be one reason it never seemed to repair itself) and reinstalling on same drive may only hide and be a temporary fix.
To so backup clone so you can have another drive to boot from and run system maintenance (and you could do a clean install too, only needs 20GB to setup an emergency system). Or you have 10.7.5 or later and then you have Recovery Mode.
TimeMachine 101
https://support.apple.com/kb/HT1427
http://www.apple.com/support/timemachine
Recovery Mode
http://support.apple.com/kb/HT4718
How to clone your system:http://macperformanceguide.com/Mac-HowToClone-backup.html
http://macperformanceguide.com/Mac-HowToClone.html
http://www.macupdate.com/app/mac/7032/carbon-copy-cloner
http://www.macperformanceguide.com/blog/2012/20120711_2-MacPro-internal-clone-ba ckup.html
Using Cloning as a Backup Strategy

Similar Messages

My Mac Pro 2010 is shutting off when I try to turn it on and the battery is charged any suggestions on what I can do

My Mac Pro 2010 is shutting off when I try to turn it on and the battery is fully charged. Any suggestions

Have you tried a SMC reset?
http://support.apple.com/kb/ht3964
Ciao.

Taking the big leap: buying new computer, camera, color software (X-Rite), printers...would love some feedback from those who may know about fine art reproduction. I'm opting for Canon camera options, Mac Pro vs iMac, and in printers, the Epson 7600.

Friends of Digital Workflow, especially photographers,
I'm just about to buy all new studio equipment.
I have two threads to my question:
1. Want some input about iMac vs Mac Pro (with a 27' monitor), which monitor system do you prefer?
2. I am Guru level in the Creative Suite but have little knowledge base for working with Aperature. Want some feed back about pros and cons of the workflow.
I'm also investing in X-Rite Color Suite for Print so that cameras, monitors, printers and projectors may be calibrated. I've used Gretag equipment for years and know profiling quite well. This is an important issue for knowledge about how profiles interface with Aperature.
I appreciate any and all comments.
Merci,
Frederick Park
North Carolina
PS You are welcome to request my personal email or phone number if you feel a lengthy discussion is an option.

Hi Frederick,
You're spending a lot of money. I will add my 2¢ -- -- but you must, as I assume you know, fully research your options.
Environment:
Start with your workspace (inc. lighting) and your clothes.
Screen:
The iMac screens are lovely, but not, from what I hear, monitor-grade accurate. For critical color work, use NEC or Eizo monitors. I use NEC, with their SpectraView II software and an X-Rite ColorMunki photospectrometer. At the time, this was the least expensive color-calibrated workflow.
Printer:
Epson's are great, imho. I use a 3880 in my studio and rent a 9900 by the hour when needed. I have read of problems (iirc) with one of the printers in the 7000 line, however. The take-home lesson that I filed in my brain was, "If you're going to spend the money on the 7000 line, just get the 9000 line."
Aperture workflow:
Aperture is a fantastic workflow tool. Since you are adept with PS, you should set PS as your external editor. Use Apertures formidable tools for storing and organizing your Images, and its robust editing tools for either all your proofing, or all but your most demanding editing needs. That said, allow a good bit of time to get the feel of Aperture. It is not at all like Bridge. But your important choice is which RAW converter you want to use. There is, imho, no reason to use Aperture if you are going to use Adobe's (or anyone else's) RAW converter.
Good luck!
--Kirby.

My iPod shuffle went through the washer and dryer. The little light turns on but no music comes through any headphones. ???

What to do??
Okay so I found my iPod had gone through the washer and dryer. It was perfectly dry. I tried to turn it on, and nothing. But I thought maybe it's just dead. So I plugged it in, let it charge...when I tried to turn it on, the little light went green. I thought hurray!! But I put in the earbuds and heard nothing except some random "Battery level 75 percent." On my sister's earbuds. On my earbuds, which went through the washer too, nothing.
What to do???

It's likely that your iPod is toast. It does not play well with water and soap.
B-rock

New Mac Pro, EFI 1.5 update is not being applied, repeated reboots

I just unpacked my new Mac Pro (64 bit) and ran through the updates. It's stuck on EFI Update 1.5. It appears to apply, the system reboots a couple of times, but Software Update still says it's available and needs to be applied.
Can someone help me fix this? Did I do something wrong?
Thanks!
Message was edited by: Forrest

User error!
It really helps if you just read the notes in the patch screen, instead of being so eager to get your system in use
Sorry about that...

Mac pro 3,1 and ati hd5870 overheating (shut down issues)

Hi all I have an early 2008 mac pro 16gig ram and the ati hd 5870 on dual boot windows 7 64bit, it has been running brill for about a year but then I started getting random shut downs in windows and the occasional one in macOS 10.7 I upgrade to 10.8 loved some of the new features but the shuts down became unbareable in both OS I would also just get black screen on startup and have to do forced reboots etc.
If I took out the hd5870 and put back inthe original ati card everything worked as normal except the orginal card isnt supported in fcpX and I need this for my work when I take out the hd5870 card it is boiling hot so I have done some research and it appears I am not the only one with over heating issues.
I have seen there are several third party graphic card cooling options but mac being mac I dont seem to have any free additional power outputs to power a third party cooling device, so my question is this
1, is anyone selse having these issues and has figured out a way to stop the shut downs
2. has anyone or does anyone know how i can keep my card cool?
inside my mac is squeaky clean and so is the graphics card.
ps, typical it is just outside the 1 year warranty and the card is so expensive i didn;'t want to buy 1 every single year

@ Hatter
Yup prior card was 8800gt and new card is nice and snug. 10.8 was not clean install, was upgrade. Ill try safeboot although not sure how/why that will fix any long term issues i have (which are random).. Trying 10.7 i had the same issues and was hoping that 10.8 wld fix.. Why go back to 10.6.8 when it should work in todays day and age? :(
@ Grant
Have done that now although not sure why something like this is not in the owners manual?!
Thanks for the help/suggestions so far guys, much apprec.. Feels like my pro is dying on me slowly but surely...
Any other bright ideas?

Hello, I update my mac pro to 10.10. Why the photoshop cs6 change to slowly now. When I change the tools like brush to command+Z, It's will be freeze a while. why? and how can I improve?

hello, I update my mac pro to 10.10. Why the photoshop cs6 change to slowly now. When I change the tools like brush to command＋Z， It's will be freeze a while. why? and how can I improve?

what a long post....Apple, btw, does not read this stuff, so ranting, raving, and complaining here might make you feel good, but it does no good at all. That being said, I, too have a Mac Pro Quad Core Xeon with 6 gigs of ram and an nVidia 8800 GT graphics card (not as good as yours, alas) and I've had no problems at all with it. Yes, it doesn't have Thunderbolt, but maybe we Mac pro owners will get lucky and someone will come out with an adapter (probably not). No, you probably don't have to throw away your Mac Pro, but if you do, I'll take it, for a small "recycling" fee >:-) That was a joke. Yes, the Mac Pro's future isn't quite clear, YET. Hopefully that will improve very soon. As for not being able to upgrade to Mountain Lion. Don't worry about that too much, Nobody is forcing you to do that. Your Mac Pro won't quit working if it isn't installed. From what I've heard, you should give the new OS a chance, and wait to get it, in case there might be some bugs, or stuff not working with the new OS, which has been known to happen. Yes, we Mac Pro owners don't like being treated like mushrooms-kept in the dark, and being fed......... but Apple is Apple and it will do what it does, and there is nothing you or me can really do to change that. All I can say is....trust, have faith, be patient, go for a walk, do something else to take your mind off of this problem. IF apple decides to drop the Mac Pro for good, and that's a big "IF", I think they will anger a whole bunch of people
which isn't good. However, that hasn't happened...YET. Let us hope that it doesn't
John B

I bought Mac pro in china, and i have 2 systems, now i want to reset my Mac, so could the app store help me to reset my system, and update to ios5

I bought Mac pro in china, and i have 2 systems: window7 and mac, and now i am in America, and i want to reset my Mac, so could the app store help me to reset my system, and update to , and i just want mac system. no window 7 system.

Just use the instructions in Boot Camp Assistant - same utility used to partition and setup Windows.
http://www.apple.com/support/bootcamp
Manual, FAQ, Support articles, etc.
there is a forum for Windows on Mac (Boot Camp)
https://discussions.apple.com/community/windows_software/boot_camp?view=discussi ons
You have a notebook MacBook, this is workstation/desktop forum
https://discussions.apple.com/community/notebooks/macbook_pro
http://www.apple.com/support/macbookpro

For some reason, the Flash Player on my MAC Pro stopped working, I've checked the install on my Adobe Flash Player and the are current, but the plug-ins don't seem to be working. Can anyone help me get it working?

For some reason, the Flash Player on my MAC Pro stopped working, I've checked the install on my Adobe Flash Player and the are current, but the plug-ins don't seem to be working. Can anyone help me get it working?

It happened w/ my MacPro 2.66 GHz Dual-Core Intel Xeon about 5 months ago; tried everything I could think of including multiple downloads of Flash, and hadn't seen any solutions here. Adobe insisted many times that I download & update, but the newest vers. wouldn't work on the computer.
On checking Adobe/Flash was reading the computer as being an earlier model. So the new version of Flash wouldn't work w/ it. Snow Leopard 10.6.8 was being read correctly but not the computer model (can't remember what MP model it was reading).
Nothing worked. So -- a very old PC trick: If nothing else works get the hammer out and bludgeon it-- might work. So I reset everything by putting the Snow Leopard install disk in, held down 'C' on restart and let it run.
Didn't take anything off the HDD first, just ran the install disk over everything.
The experts on the forums are probably cringing right now & I'd like very much for them to jump in. Love to know how my computer model was being mis-read. All I can say is, for the brave and desparate, it worked for me. Something to keep in mind.
It helped that I had a new computer on order & have 2 backups, one being mandatory. Might work only the one time but worth a check.
Good luck on working this one out.

My mac pro wont start. I push the power button and I get a click sound. A few seconds later another click sound and that it.

My mac pro wont start. I push the power button and I get a click sound. A few seconds later another click sound and that it. I've tried different power plugs. Going direct into the wall, through a power strip. By iteslf, with other devices plugged in. I removed hard drives, and some RAM, and nothing. Sometimes it would not turn on, and then some minutes later it works. So its was sparatic, but now its been the same situation for three days where it wont turn on.
I'm guessing power supply, but I wanted to see if anyone had a similar expereince and what the solution was, before I drag this beast to my local Apple store and have them look at it. Its a real pain to get it there and back and I want to be armed with some info for them. I already dragged this to them when it first started to do this, and of course it started up just fine for them. And you know if it works for the Genius then theres nothing wrong with. No matter what you explain to them.
I figure if anyone had a the same problem and was able to resolve it, I can relate that experience to the Genius even if it start up for them.
Thanks

Try a SMC Reset using the extended method:
Remove the AC power cord.
Press the power-on button. [This drains the stored charge from the power supply]
wait a quarter minute.
Restore the power cord, being certain to JAM it into the socket, as the big block of rubber inhibits proper seating.
wait a quarter minute
attempt to power on.
If no joy, examine the button battery half-hidden behind the graphics card. Remove it to measure the Voltage. A new battery should not cost over US$5, and measures a little over 3 Volts. BR-2032 is used in garage door opener controls and car door locks controls. The geeks at Radio Shack can measure it for you.

I have a Mac pro(1 free bay) and a mac mini I need to back both of them Is it better to use an external NAS HD or an internal hard drive on my mac pro (mid 2010) What option has the faster GB/s?

I have a Mac pro(1 free bay) and a mac mini I need to back up both of them (time machine) Is it better to use an external NAS HD or an internal hard drive on my mac pro (mid 2010)
What option has the faster GB/s?

Disk drive using native SATA bus interface will allow the drive to copy and always present and ready.
But once you have backup any hourly changes should be smaller and as long as the NAS and your switch should allow enough.
You should always have off line backups and don't rely on just one backup set or just TimeMachine.
WD RED models are designed for RAID and NAS and 7.2k instead of your more standard slower green 5400 rpm green models while still costing less than WD Blacks.
http://www.amazon.com/gp/product/B008JJLW4M/
How to clone your system:
http://macperformanceguide.com/Mac-HowToClone-backup.html
http://macperformanceguide.com/Mac-HowToClone.html
http://www.macupdate.com/app/mac/7032/carbon-copy-cloner
Using Cloning as a Backup Strategy
http://www.macupdate.com/app/mac/7032/carbon-copy-cloner
http://www.bombich.com/software/updates/ccc-3.5.html
Clone to internal, TimeMachine to NAS is one way to go at it.

I have a Mac Pro Mid 2010 and Mac Pro Mid 2012, both running OS 10.8.5. When working in Illustrator the Display starts to make my Document trasparent and I can see the desktop through my document. I have to toggle my display res back and forth to fix it?

I have a Mac Pro Mid 2010 and 2012 both running OS 10.8.5. Both using ATI Radeon HD 5770 1052 MB vid cards.
Using the standard Display that came with the Macs, everytime I'm working in Ilustrator CS5 or 6, the Document I am working on gets transparent, and I when I try to move a pallete or the Document itself, the pallet or doc leaves trails from where it was to where I moved it. The only way I can resolve it is to open the Display prefs, choose a lower res, then switch it back to the "Best for Display" option. This started happening on both machines after the 10.8.5 update. I have since gone through all the Pram and Board resets, even had Apple replace the Vid Card and nothing helps. Anybody have this issue. It only happens in Illustrator.

Hi Marco@JustALittle,
I really apologise for the inconvenience.
I will have someone from the senior team reach out to you shortly.
Can you please send a private message to me with your contact number and the best time to reach you.
If you dont know how to do that refer : http://forums.adobe.com/thread/1184148

Can I interrupt a migration from Mac Book Pro to Imac and what are the consequences

can I interrupt a migration from Mac Book Pro to iMac and what are the consequences

Les:
Here are some options:
• You could copy the data file to your laptop, work on it, and update the file on the iMac when you are back.
• You can use an application like Log Me In to access your home computer from your laptop.
• You can use DropBox. Install it on both computers, place your data file in a folder on the iMac, access it and work on it on your laptop and it will be automatically updated on your computer at home, even if it is not turned on, as soon as it is connected to the internet.
Please do post back with further questions or comments.
cornelius

Radeon HD 5770 graphics card works perfectly with my MAC Pro 1,1 and Adobe CS6. However, Photoshop CC won't read the card drivers and says I need to reinstall them and disabled 3D funtions as a result. Anyone else with this issue?

Radeon HD 5770 graphics card works perfectly with my MAC Pro 1,1 and Adobe CS6. However, I upgraded to Adobe CC and Photoshop CC disabled some filters and 3D functionality. The preference panel for Performance/Graphics Card in Photoshop CC is greyed out and inaccessible and shows this message -
"Photoshop detected an error in your display driver. Update or reinstall the driver and check Use Graphics Processor to retry."
I still have Photoshop CS6 installed and it still works perfectly. Anyone else with this issue? Is there a driver update for this compatable with my setup?
OS 10.7.5
Mac Pro 1,1
20gb ram
ATI Radeon HD 5770 Graphics Card
30" Apple Cinema HD display

after going round with this Adobe was able to find the fix....opened the "show content" folder for the application Photoshop CC (control click on the application folder) and navigate to the sniffer file and rename it by putting a tilda ~ in front of the name..." ~sniffer ", close and open PhotoshopCC...and voila, problem solved... Thankyou Adobe support

I have a Mac Pro 1.1 and want to put one or two large screens HD displays on it. What might I need to up grade and which HD TV or displays or the best for the money?

I have a Mac Pro 1.1 and want to add one or two HD displays or HDTVs to my computer. I do a lot of work with Photoshop and need a larger work area.
What do I need to up grade my computer? Which displays and or HDTV's might be the most cost effective to get?

Disk drive using native SATA bus interface will allow the drive to copy and always present and ready.
But once you have backup any hourly changes should be smaller and as long as the NAS and your switch should allow enough.
You should always have off line backups and don't rely on just one backup set or just TimeMachine.
WD RED models are designed for RAID and NAS and 7.2k instead of your more standard slower green 5400 rpm green models while still costing less than WD Blacks.
http://www.amazon.com/gp/product/B008JJLW4M/
How to clone your system:
http://macperformanceguide.com/Mac-HowToClone-backup.html
http://macperformanceguide.com/Mac-HowToClone.html
http://www.macupdate.com/app/mac/7032/carbon-copy-cloner
Using Cloning as a Backup Strategy
http://www.macupdate.com/app/mac/7032/carbon-copy-cloner
http://www.bombich.com/software/updates/ccc-3.5.html
Clone to internal, TimeMachine to NAS is one way to go at it.

Is my Mac pro being cleaned and updated when the little wheel turns?

Similar Messages

Maybe you are looking for