Is normal for the ipad get hot on the back while in use?, Is normal for the ipad get hot on the back wile in use?

I have an ipad, when is being used it gets hot on the back, is that normal?

Warm is normal. The processor and battery generate heat. 'Too hot to handle', quite literally, is a good rule of thumb for when to stop using it and make an appointment to get your device checked out.

Similar Messages

  • Please help me to repair my broken IPAD screen I just bought it two months back while my wife is cleaning around something has fallen down on the screen which damage the front side however, everything is working fine including app, wifi?

    BTW , I live in Saudi Arabia

    Sorry, but I cannot tell you what the "best" option would be. You can take the iPad to an authorized Apple service provider and have the iPad replaced. Unless you purchased AppleCare+ for the iPad (I don't know if that plan is offered in the KSA) then you will have to pay Apple's out-of-warranty exchange price. You can search for an authorized service center through this web page:
    http://www.apple.com/uk/buy/locator/
    There are independent iPad repair services that may be able to replace the screen for less. Do a web search for "ipad repair".  Note, though, that if you elect to have the iPad serviced by an unauthorized shop, all further warranty will be void. It is also possible to find parts and do a repair yourself, though you do so completely at your own risk.
    It will be up to you to decide which option is best for you.
    Regards.

  • Error while determining ref.mov.type for WM via Table 156S: 647/ / / /L/ /

    Guyz,
    Firstly despite the plant+storage location + warehouse no. assignments are done , my replenishment delivery (delivery for stock transport order between plants under same company code) is not picking up storage location and warehouse no and thus stopping me from doing picking and PGI (post goods issue).
    However in VL02N when i'm trying to change storage location for line item, i'm getting following weird error
    *Error while determining ref.mov.type for WM via Table 156S: 647/ / / /L/ /*
    I found a SAP Note(133223) regarding this error and VL02 transaction but that note was specific to older versions. I'm on ECC 6.0
    Any suggestions please ?
    Thanks

    Warehouse managment has its own movement types, most identical to inventory management movement types.
    These WM movement types are determined via reference movement types.
    the error you have just looks like your customizing is not complete.
    IMG > LE > WM > Interfaces > IM > define movement types.

  • Getting 500 Internal Server Error while tryig to log into freshly upgraded

    Hi
    Getting 500 Internal Server Error while tryig to log into freshly R12 upgraded.
    Below is the application.log messages.
    =================================================================================================
    12/12/31 10:02:22.295 html: Servlet error
    java.io.IOException: Broken pipe
    at sun.nio.ch.FileDispatcher.write0(Native Method)
    at sun.nio.ch.SocketDispatcher.write(SocketDispatcher.java:41)
    at sun.nio.ch.IOUtil.writeFromNativeBuffer(IOUtil.java:104)
    at sun.nio.ch.IOUtil.write(IOUtil.java:75)
    at sun.nio.ch.SocketChannelImpl.write(SocketChannelImpl.java:334)
    at java.nio.channels.Channels.write(Channels.java:71)
    at java.nio.channels.Channels.access$000(Channels.java:58)
    at java.nio.channels.Channels$1.write(Channels.java:145)
    at com.evermind.server.http.AJPOutputStream.endRequest(AJPOutputStream.java:117)
    at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:317)
    at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:199)
    at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
    at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
    at java.lang.Thread.run(Thread.java:735)
    13/01/01 23:22:07.988 html: Servlet error
    oracle.apps.fnd.framework.OAException: Application: FND, Message Name: FND_GENERIC_MESSAGE. Tokens: MESSAGE = java.lang.RuntimeException: oracle.apps.fnd.common.AppsException: java.sql.SQLException: The Network Adapter could not establish the connection;
    at oracle.apps.fnd.framework.OAException.wrapperException(OAException.java:912)
    at oracle.apps.fnd.framework.OAException.wrapperException(OAException.java:886)
    at oracle.apps.fnd.framework.server.OAExceptionUtils.processAOLJErrorStack(OAExceptionUtils.java:1017)
    at oracle.apps.fnd.framework.OACommonUtils.processAOLJErrorStack(OACommonUtils.java:901)
    at oracle.apps.fnd.framework.webui.OAServerDelegate.releaseWebAppsContext(OAServerDelegate.java:1823)
    at oracle.apps.fnd.framework.webui.OAJSPHelper.handleErrorStackDisplay(OAJSPHelper.java:1455)
    at OAErrorPage.jspService(_OAErrorPage.java:257)
    13/01/01 23:41:46.338 html: Error initializing servlet
    java.lang.NoClassDefFoundError: oracle.apps.fnd.sso.Utils (initialization failure)
    at java.lang.J9VMInternals.initialize(J9VMInternals.java:140)
    at oracle.apps.fnd.sso.AppsLoginRedirect.AppsSetting(AppsLoginRedirect.java:221)
    at oracle.apps.fnd.sso.AppsLoginRedirect.init(AppsLoginRedirect.java:287)
    at com.evermind[Oracle Containers for J2EE 10g (10.1.3.4.0) ].server.http.HttpApplication.loadServlet(HttpApplication.java:2379)
    at com.evermind[Oracle Containers for J2EE 10g (10.1.3.4.0) ].server.http.HttpApplication.findServlet(HttpApplication.java:4830)
    at com.evermind[Oracle Containers for J2EE 10g (10.1.3.4.0) ].server.http.HttpApplication.findServlet(HttpApplication.java:4754)
    at com.evermind[Oracle Containers for J2EE 10g (10.1.3.4.0) ].server.http.HttpApplication.getRequestDispatcher(HttpApplication.java:2978)
    at com.evermind[Oracle Containers for J2EE 10g (10.1.3.4.0) ].server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:738)
    at com.evermind[Oracle Containers for J2EE 10g (10.1.3.4.0) ].server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:453)
    at com.evermind[Oracle Containers for J2EE 10g (10.1.3.4.0) ].server.http.AJPRequestHandler.run(AJPRequestHandler.java:313)
    at com.evermind[Oracle Containers for J2EE 10g (10.1.3.4.0) ].server.http.AJPRequestHandler.run(AJPRequestHandler.java:199)
    at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
    at com.evermind[Oracle Containers for J2EE 10g (10.1.3.4.0) ].util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
    at java.lang.Thread.run(Thread.java:735)
    Caused by: java.lang.ExceptionInInitializerError
    at java.lang.J9VMInternals.initialize(J9VMInternals.java:222)
    at oracle.apps.fnd.sso.Utils.<clinit>(Utils.java:674)
    at java.lang.J9VMInternals.initializeImpl(Native Method)
    =================================================================================================
    Current workaround is bouncing the oacore services.
    Already raised the SR with Oracle.
    Oracle support analyst suggesting to upgrade the JDK version from SR2 to SR11 or higher to fix this issue.
    Please let us know any other tips to fix this issue.
    Regards,
    Jagadeesha

    Hi,
    I have gone through the docs. , not use full. Please find the inline comments for the same.
    E-Business Suite Users Experience Intermittent HTTP-500 Errors and Database Connection Errors [ID 1314433.1] -- No solution
    R12: Http Server Crashing Frequently With Segmentation Fault (NAS or SAN filesystem) [ID 732857.1] -- Already it is under local file system only.
    How to resolve Broken Pipe errors in E-Business Suite R12 ? [ID 1480156.1] -- No solution
    Autoconfig is completed wihtout any errors.
    I have not chedked the database log file. I will check and update you soon.
    Cheers,
    Jagadeesha

  • Using disk images for learning games?

    Hello, I've 2 g3 imacs running 9.2.2, and they are for the grandkids to use learning games on.
    The kids are very hard on the software disks. When I found out about disk images I made them up, now to install them properly. The games are installed, but where to store the disk images? The desk top icons for the games will work after the disk images have been double clicked and the mounted disk image appears on the desktop, but when the imacs are turned off the mounted disk image is lost. How or where does one put the disk images in a safe place so the kids don't get at them, and the disks are mounted every time, without actually starting, when the Mac is started? Start up menu?
    I'm planning on multiple accounts with them having a standard account with game privileges so they don't mess the whole thing up. If their accounts get too messed up for me to repair I figured on maybe deleting the account and opening up a new one? Any Ideas are very welcome.
    Thank you,
    EZ

    Hi, EZ -
    You're quite welcome.
    I had a thought with regard to the disk image files. Are they in a .smi format, or are they in a .img format?
    The .img format requires the assistance of the Disk Copy utility in order to mount the image. This is the standard format generated by the user version of Disk Copy. It requires that Disk Copy be available to Finder to act as a helper app in order to mount the image.
    The .smi format does not - .smi stands for Self-Mounting Image. The user version of Disk Copy can not make this format; but I have seen a utility to convert .img format to .smi format. The slight advantage with this format is that Disk Copy does not need to be available to Finder.
    In both cases the default is to run a checksum verification before the image is finally mounted. The delay caused by this verification can be inconvenient - verification is intended to confirm the integrity of the image after it has been copied, transported, or downloaded, but is usually not necessary when the image resides on a hard drive.
    The checksum verification for .img file types can be removed. With the image not mounted, open Disk Copy. In Disk Copy's Preferences (Edit menu), uncheck the Verify Checksum item. Save the Preferences window. Then select Convert Image from the Image menu, navigate to the disk imge file from which you want to remove the verifiaction, select it and click the Open button. A new window will appear, similar to a Save As type window. Leave everything in that window untouched (unless you want to change the base name of the file - the extension .img should be left intact) and click the Save button. The image will be mounted, the original disk image file will be deleted, and a new disk image file created. Unfortunately creating the new image file takes quite a while since it is creating a new one, not actually modifying the old one - but it does get rid of the intrusion of the checksum verification requirement.
    I verified on my G4/500 running OS 9.1 that a .img file (one I had made from a game CD years ago) dropped into the Startup Items folder will be mounted automatically at the end of the startup sequence. I also tested with an alias to the .img file, and it, too, worked fine - the disk image was mounted automatically at the conclusion of the startup sequence.
    When you make the alias to the disk image file (the .img one), be sure you are placing it into the Startup Items folder, and not the Startup Items (disabled) folder.
    If you have the machine set to use Simple Finder (which removes Finder's keyboard commands and many menu options for Finder), that may interfere with items in the Startup Items folder being run at startup. Or, it may not - I have not checked that.
    *** Edit ***
    I have verified that the alias to a .img file will mount the disk image even when the machine is booted using Simple Finder.
    Another thought, related to Multiple Users - if you do decide to set up Multiple Users, and the disk images are of type .img, be sure to authorize Disk Copy for each of the accounts for which the disk images are to be mounted. If you have the disk image files in a .smi format, since Finder views that file type as being an application, you would need to authorize each of those disk image files for each account which is to have access to them.

  • An error occurred while applying your dashboard selections for this page???

    Hi there,
    I'm getting this error on the dashboard page.
    "An error occurred while applying your dashboard selections for this page" Error Codes: GV3MWW29
    It is removed when I click "Clear my selection" from page option.
    Is there any other way to remove the error without clicking "Clear My selction" everytime.
    Thanks

    Have you saved your selections by selecting 'Saved Current Selections'? When do you get this error?
    There are a few posts in this forum; here's one that may or may not help; take a look if you haven't already..
    GV3MWW29 error
    Thanks!

  • Error occurred while processing SAP SQL Tools for SQLServer (Database Copy)

    Hello,
    We are currently running ERP 6 EP4 support stacks 6. Two weeks ago we
    refreshed our sandbox from QAS system and installed support stack 9 for
    testing. Kernel was also upgraded from sp69 to sp137 as a part of the
    support pack installation.
    This week, I was asked to do another refresh of sandbox from the QAS system. As the
    kernel was upgraded before to sp139, I copied back the previous kernel
    file sp69 to the kernel folder and started refresh process as usual.
    When I was running SAP for SQL, it ran successfully thorugh all the
    steps but failed in the final steps with the following error logs:
    =======================================================================
    An error occurred while processing option SAP Toools for MS SQL Server
    > Database Copy Completion( Last error reported by the step: System
    call failed. Error 2 (The system cannot find the file specified. ) in
    execution of system call 'CreateProcessAsUser' with parameter ( ,
    NULL, Program Files/sapinst_instdir/MSS/CPY, &StartupInfo,
    &ProcessInfo), line (631) in file (synxcchapp.cpp), stack trace:
    iaxxejsctl.cpp: 272: EJS_ControllerImpl::executeScript()
    d:\depot\bas\710_rel\bc_710-3_rel\gen\optu\ntamd64
    \ins\sapinst\impl\src\ejs\iaxxejsbas.hpp: 450:
    EJS_Base::dispatchFunctionCall() iaxxejsexp.cpp: 178:
    EJS_Installer::invokeModuleCall() synxcchapp.cpp: 228:
    CSyChildApplicationImpl::start(false) synxcchapp.cpp: 252:
    CSyChildApplicationImpl::doStart() .). You can now:
    Choose Retry to repeat the current step.
    Choose View Log to get more information about the error.
    Stop the option and continue with it later.
    Log files are written to C:\Program Files/sapinst_instdir/MSS/CPY.

    I looked at the logs, very similar error to the one that I already posted:
    ERROR      2011-07-08 09:29:49.861
               CJSlibModule::writeError_impl()
    MUT-03025  Caught ESyException in Modulecall: At line 631 file synxcchapp.cpp
    Call stack:
    iaxxejsctl.cpp: 272: EJS_ControllerImpl::executeScript()
    d:\depot\bas\710_rel\bc_710-3_rel\gen\optu\ntamd64\ins\sapinst\impl\src\ejs\iaxxejsbas.hpp: 450: EJS_Base::dispatchFunctionCall()
    iaxxejsexp.cpp: 178: EJS_Installer::invokeModuleCall()
    synxcchapp.cpp: 228: CSyChildApplicationImpl::start(false)
    synxcchapp.cpp: 252: CSyChildApplicationImpl::doStart()
    System call failed. Error 2 (The system cannot find the file specified.
    ) in execution of system call 'CreateProcessAsUser' with parameter (<token>, NULL, <command line for executable saplicense.exe, NULL, NULL, TRUE, 0x420, NULL, C:/Program Files/sapinst_instdir/MSS/CPY, &StartupInfo, &ProcessInfo), line (631) in file (synxcchapp.cpp), stack trace: iaxxejsctl.cpp: 272: EJS_ControllerImpl::executeScript()
    d:\depot\bas\710_rel\bc_710-3_rel\gen\optu\ntamd64\ins\sapinst\impl\src\ejs\iaxxejsbas.hpp: 450: EJS_Base::dispatchFunctionCall()
    iaxxejsexp.cpp: 178: EJS_Installer::invokeModuleCall()
    synxcchapp.cpp: 228: CSyChildApplicationImpl::start(false)
    synxcchapp.cpp: 252: CSyChildApplicationImpl::doStart()
    TRACE      2011-07-08 09:29:49.861 [iaxxejsbas.hpp:488]
               EJS_Base::dispatchFunctionCall()
    JS Callback has thrown unknown exception. Rethrowing.
    ERROR      2011-07-08 09:29:49.875 [sixxcstepexecute.cpp:971]
    FCO-00011  The step doLI with step key |SAPMSSTOOLS|ind|ind|ind|ind|0|0|MssSysLI|ind|ind|ind|ind|7|0|doLI was executed with status ERROR ( Last error reported by the step: System call failed. Error 2 (The system cannot find the file specified.
    ) in execution of system call 'CreateProcessAsUser' with parameter (<token>, NULL, <command line for executable saplicense.exe, NULL, NULL, TRUE, 0x420, NULL, C:/Program Files/sapinst_instdir/MSS/CPY, &StartupInfo, &ProcessInfo), line (631) in file (synxcchapp.cpp), stack trace: iaxxejsctl.cpp: 272: EJS_ControllerImpl::executeScript()
    d:\depot\bas\710_rel\bc_710-3_rel\gen\optu\ntamd64\ins\sapinst\impl\src\ejs\iaxxejsbas.hpp: 450: EJS_Base::dispatchFunctionCall()
    iaxxejsexp.cpp: 178: EJS_Installer::invokeModuleCall()
    synxcchapp.cpp: 228: CSyChildApplicationImpl::start(false)
    synxcchapp.cpp: 252: CSyChildApplicationImpl::doStart()
    TRACE      2011-07-08 09:29:49.886
      Call block:CallBackInCaseOfAnErrorDuringStepExecution
        function:CallTheLogInquirer
    is validator: true

  • How do I use itune music for creating photo DVDs with music in adobe element 10?

    How do I use/transfer itune music for DVDs with music in adobe elements premier? 

    On each computer:
    Open iTunes. Select Preferences from the iTunes menu and click on the Advanced icon in the toolbar. At the top you will see a box showing the path to your iTunes library. Click on the Change button, navigate to the location for the library on your external drive, select it and click on the Open button. Note this permanently changes the library's location on that computer. That means you cannot access your music unless the external drive is connected.
    If you don't want a permanent change, then press the OPTION key and hold it down while you launch iTunes. iTunes will then prompt you to select the library you wish to open for that session.

  • When i plug in my ipod touch to charge it starts with the battery with the little bolt under it then it goes to the apple logo screen and after a while it flashes white and just shuts off and restarts the process. Whats wrong and how do i fix it?

    when i plug in my ipod touch it goes to the battery witht he bolt under it the goes to the apple logo screen and after a while it will flash white like its trying to go to the lock screen but just restarts and restarts the process and keeps doing it. What should i do? Is there any way to fix it?

    See if you missed anything here:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • How to update  Service Contract using BAPI/FM for ME31K

    Hi ,
    I am using BAPI BAPI_CONTRACT_CREATE to create contracts.
    It works fine, the only problem i am facing is while updating line item with item category "D' its simply skips the item category and create a item. The item category is blank when i see in transaction ME33K.
    When i create it using ME31K transaction with line item item category type  "D' its ask me to fill the services also for that line item.
    My question is is there any BAPI which i can use to update the Services for item line with item category  D.
    Thanks
    Amar

    Hi Amar,
    Not sure if this would help you but you can consider writing different logic (probably a BDC) for item category 'D', and use BAPI for all other cases (if 'D' is the only exception).
    BAPI documentaion says:
    *External services (planned and unplanned services) are not supported.
    Creation of configurations is not supported*
    Regards,
    Shyam

  • Hi - I'm trying to download an app to my iphone but it says my password or ID is not recognised. I've changed my password and it works on my laptop. I think it could be because the ID on my phone is googlemail while on my macbook it's gmail

    Hi - I'm trying to download an app to my iphone but it says my password or ID is not recognised. I've changed my password and it works on my laptop. I think it could be because the ID on my phone is googlemail while on my macbook it's gmail - how do I change the apple ID on my phone?
    Many thanks!
    david

    Answered in the other thread you posted in:
    i am trying to download new software and my mac keeps asking for the administrator name and password... i enter my apple…
    Please don't post in more than one place. It can lead to people wasting their time answering a question which has already been answered elsewhere.

  • Condition for AED  maintained in Migo but not showing while doing miro

    Dear Experts.
    Please suggest,
    In PO AED conditon JMOP is not maintained, but it is maintained in the MIGO, and hence does not reflect while doing MIRO.
    How can this be rectified to pass the proper entry at the time miro.
    Regards,
    Charmaine

    Hi,
    Check the difference of  condition types you maintained in Excise defualts place.
    SPRO>Logistics general >>Tax on Goods Movements>>India>>basic settings >> Detrmination of Excise duty>>Mainatin Excise defalts..
    I think you missed the A/P AT1 cond type maintained in Excise defaults.
    Check the scenario as per my [revous mail , that is Excise is coming or not at the time of Excise capure.
    Regards,
    Andra

  • HT1414 The screen on my iphone 3 froze while I was trying to update.  Now it has iTunes in a circle with a charger pointing up to it on the screen.  It won't let me do anything else.  Turning it off and on doesn't help, the same thing comes back on the sc

    The screen on my iphone 3 froze while I was trying to update it.  Now it has the iTunes icon with the end of a charger pointint up to it.  Unplugging or restarting doesn't help.  The same thing always comes back on the screen. It is completely frozen. 

    http://support.apple.com/kb/HT1808

  • I am traveling to India with my new iPad...to enable me to be online 24hrs a day to access my emails...do I just need a local sim card...also can I use a normal adaptor to plug in to charge or am I best paying for the apple universal kit....

    I am traveling to India with my new iPad...to enable me to be online 24hrs a day to access my emails...do I just need a local sim card...also can I use a normal adaptor to plug in to charge or am I best paying for the apple universal kit....

    If you have the AT&T 3G iPad then you can explore the SIM card. I'm not sure if India has the SIM network or another type. REgardless you should be able to access wifi.
    HOnestly, if I were traveling I'd get a plug adapter from a normal retail store. You can get a good one for $20 or less at your local retailer, Walgreens, Walmart, Target, probably KMart though I've not looked for them there. Best Buy and the office supply stores may also have them. You don't have to pay for the official one unless you want to. (I have 'over the counter' plug adapters so if I traveled I'd use what I have not buy another)

  • TS3274 My mini Ipad has somehow gone into a enlarged picture mode which is making it very hard for me to use. I cant seem to get it back to normal size. Can anyone advise me please. Val.

    My mini Ipad has somehow gone into a enlarged picture mode which is making it very hard for me to use. I cant seem to get it back to normal size. Can anyone advise me please. Val.

    Hi Lismoyne29,
    It sounds like you may have accidentally activated zooming in your Accessibility settings. Here is an article that can tell you about this feature and how to deactivate it:
    Zoom - iPhone
    http://help.apple.com/iphone/8/#/iph3e2e367e
    Take care, and thanks for visiting the Apple Support Communities.
    Cheers,
    Braden

  • TS2755 I am getting a red flag when I enter an email address for a text message from my iPad.  The same email works from my iPhone.

    I am getting a red flag on any email I enter when trying to submit a message.  The same email address works on my iPhone.

    TestnTag wrote:
    When attempting to send text message from iPad I get error message "phone number not registered with iMessage REMOVE" the number is for iPhone an includes area code and country code. How do u register a number with iMessage?.
    The iPad is not capable of sending an SMS message so texts, pictures, etc., must go through iMessage.  The destination device must be registered with the Apple servers by turning on iMessage.  Therefore, the user with the iPhone must enable it for iMessage.

Maybe you are looking for