Is null and regular value in where ($variable)
is there any polibility to create select depend on value in where ?
select count(x) where y = $variablebut if variable is NULLit doesn't work cause must be IS NULL or IS NOT
select count(x) where y is $variableIs there any posibility to make it working with null and regular variable?
try:
select count(x) from <yourtable> where nvl(y,<not_possible_value>) = nvl($variable,<not_possible_value>);where <not_possible_value> is a value that is not possible for column y.
E.g. if y always is a positive number you could use the value -1.
Similar Messages
-
Hi All,
I like to know, is it NULL and Space value is same in ABAP, if it is not how to check null value.
Thank you.
Senthileverything is correct though some answers are not correct.
A Database NULL value represents a field that has never been stored to database - this saving space, potentially.
Usually all SAP tables are stored with all fields, empty fields are stored with their initial value.
But: If a new table append is created and the newly-added fields do not have the 'initial value' marked in table definition, Oracle will just set NULL values for them.
as mentioned: There is no NULL value to be stored in an ABAP field. The IS NULL comparison is valid only for WHERE clause in SELECT statement. WHERE field = space is different from WHERE field IS NULL. That's why you should check for both specially for appended table fields.
If a record is selected (fulfilling another WHERE condition) into an internal table or work area, NULL values are convertted to their initial values anyway.
Hope that sheds some light on the subject!
regards,
Clemens -
Avoiding null and duplicate values using model clause
Hi,
I am trying to use model clause to get comma seperated list of data : following is the scenario:
testuser>select * from test1;
ID VALUE
1 Value1
2 Value2
3 Value3
4 Value4
5 Value4
6
7 value5
8
8 rows selected.
the query I have is:
testuser>with src as (
2 select distinct id,value
3 from test1
4 ),
5 t as (
6 select distinct substr(value,2) value
7 from src
8 model
9 ignore nav
10 dimension by (id)
11 measures (cast(value as varchar2(100)) value)
12 rules
13 (
14 value[any] order by id =
15 value[cv()-1] || ',' || value[cv()]
16 )
17 )
18 select max(value) oneline
19 from t;
ONELINE
Value1,Value2,Value3,Value4,Value4,,value5,
what I find is that this query has duplicate value and null (',,') coming in as data has null and duplicate value. Is there a way i can avoid the null and the duplicate values in the query output?
thanks,
Edited by: orausern on Feb 19, 2010 5:05 AMHi,
Try this code.
with
t as ( select substr(value,2)value,ind
from test1
model
ignore nav
dimension by (id)
measures (cast(value as varchar2(100)) value, 0 ind)
rules
( ind[any]= instr(value[cv()-1],value[cv()]),
value[any] order by id = value[cv()-1] || CASE WHEN value[cv()] IS NOT NULL
and ind[cv()]=0 THEN ',' || value[cv()] END
select max(value) oneline
from t;
SQL> select * from test1;
ID VALUE
1 Value1
2 Value2
3 Value3
4 Value4
5 Value4
6
7 value5
8
8 ligne(s) sélectionnée(s).
SQL> with
2 t as ( select substr(value,2)value,ind
3 from test1
4 model
5 ignore nav
6 dimension by (id)
7 measures (cast(value as varchar2(100)) value, 0 ind)
8 rules
9 ( ind[any]= instr(value[cv()-1],value[cv()]),
10 value[any] order by id = value[cv()-1] || CASE WHEN value[cv()] IS NOT NULL
11 and ind[cv()]=0 THEN ',' || value[cv()] END
12 )
13 )
14 select max(value) oneline
15 from t;
ONELINE
Value1,Value2,Value3,Value4,value5
SQL> -
From two given tables, how do you fetch the values from two columns using values from one column(get values from col.A if col.A is not null and get values from col.B if col.A is null)?
Hi,
Use NVL or COALESCE:
NVL (col_a, col_b)
Returns col_a if col_a is not NULL; otherwise, it returns col_b.
Col_a and col_b must have similar (if not identical) datatypes; for example, if col_a is a DATE, then col_b can be another DATE or it can be a TIMESTAMP, but it can't be a VARCHAR2.
For more about NVL and COALESCE, see the SQL Language manual: http://docs.oracle.com/cd/E11882_01/server.112/e26088/functions119.htm#sthref1310
I hope this answers your question.
If not, post a little sample data (CREATE TABLE and INSERT statements, relevant columns only) for all tables involved, and also post the results you want from that data.
Explain, using specific examples, how you get those results from that data.
Always say which version of Oracle you're using (e.g., 11.2.0.2.0).
See the forum FAQ: https://forums.oracle.com/message/9362002 -
Union two tables with diffrent count of fields with null and float value
Hello,
i want to union two tables, first one with 3 fields and second one with 4 fields (diffrent count of fields).
I can add null value at end of first select but it does not work with float values in second table. Value form second table is convert to integer.
For example:
select null v1 from sessions
union
select 0.05 v1 from sessions
result is set of null and 0 value.
As workaround i can type:
select null+0.0 v1 from sessions
union
select 0.05 v1 from sessions
or simple change select's order.
Is any better/proper way to do this? Can I somehow set float field type in first select?
Best regards,
Lukasz.
WIN XP, MAXDB 7.6.03Hi Lukasz,
in a UNION statement the first statement defines the structure (number, names and types of fields) of the resultset.
Therefore you have to define a FLOAT field in the first SELECT statement in order to avoid conversion to VARCHAR.
Be aware that NULL and 0.0 are not the same thus NULL+0.0 does not equal NULL.
In fact NULL cannot equal to any number or character value at all.
BTW: you may want to use UNION ALL to avoid the search and removal of duplicates - looks like your datasets won't contain duplicates anyhow...
Regards,
Lars -
Hi All,
Is there a parameter which allows me to translate automatically the instruction
select * from table_a where col_a = ''
in
select * from table_a where col_a is null
ThanksNot in Oracle, no. col_a = NULL and col_a IS NULL are logically distinct clauses. If you are dealing with NULL's, you absolutely must use three-valued logic in your statements.
Depending on what you are doing, you may be able to throw an NVL on col_a to ensure a non-NULL value is returned.
Justin
Distributed Database Consulting, Inc.
http://www.ddbcinc.com/askDDBC -
Hiding Entire Row having Null and default valu in SSRS Using Expression
Hi,
In my reports having number of rows and three columns.The first columns value will be different for each and every row and it will be hard corded to the text box. My question is how to hide the particular row second and third column suppose
to be null or empty data and each and every row had Hide is true.Please provide me the solution if anybody known.
Regards,
HariKan
HariKanHi Qiuyun Yn,
Thanks for your reply.
If i use Not Null in my query in where
condition then i have to add 30 fields in my where condition, and i guess it will not give proper output why because i have 30 columns.
So could you please give me in report level solution. I am struggling past 10 days for this issue.
Regards,
Hari
HariKan -
Parsing XML and Storing values in instance variable
hi,
i'm new to XML.
here i'm trying to parse an XML and store their element data to the instance variable.
in my main method i'm tried to print the instance variable. but it shows "" (ie it print nothing ).
i know the reason, its becas of the the endElement() event generated and it invokes the characters() and assigns "" to the instance variable.
my main perspective is to store the element data in instance variable.
thanks in advance.
praks
import java.io.*;
import java.net.*;
import java.util.*;
import javax.xml.parsers.*;
import org.xml.sax.*;
import org.xml.sax.helpers.*;
public class mysax extends DefaultHandler
String ctelement;
CharArrayWriter contents;
String vname1,vrcbreg1,vaddress1,vcountry1,vtelephone1,vfax1;
String vname,vrcbreg,vaddress,vcountry,vtelephone,vfax;
public mysax()
vname1 = null;
vrcbreg1 = null;
vaddress1 = null;
vcountry1 = null;
vtelephone1 = null;
vfax1 = null;
contents= new CharArrayWriter();
public void doparse(String url) throws Exception
SAXParserFactory spf = SAXParserFactory.newInstance();
SAXParser sp = spf.newSAXParser();
ParserAdapter pa = new ParserAdapter(sp.getParser());
pa.setContentHandler(this);
pa.parse(url);
public void startElement(String namespace,String localName,String qName,Attributes atts)
ctelement = localName;
public void endElement(String uri,String localName,String qName) throws SAXException
public void characters(char[] ch,int start, int length) throws SAXException
try
if(ctelement.equals("name"))
vname = new String (ch,start,length);
System.out.println("The method "+vname1);
}catch (Exception e)
System.out.println("The exception "+e);
public static void main(String args[])
try
mysax ms = new mysax();
ms.doparse(args[0]);
System.out.println("the contents name "+ms.vname1);
catch(Exception e)
System.out.println("this is exception at main" +e);
my XML looks like
<coyprofile_result>
<company>
<name>abcTech</name>
<rcbreg>123456789</rcbreg>
<address>Singapore</address>
<country>sg</country>
<telephone>123456</telephone>
<fax>123155</fax>
</company>
</coyprofile_result>I believe that the problem has to do with the value you assign to ctelement. You are assigning the value of localName to ctElement, however for the element: <name>...</name> the localname is empty string i.e. "", but qName equals "name". Because you are assigning empty string to ctElement, when you do the comparison in characters of ctElement to "name" it will always be false. So in startElement change it to ctElement = qName; Try it and see if it works. I have produced similar programs and it works for me.
Hope this helps. -
How to define and populate value to a variable in a text file
hi all,
i have a text file on unix server, when i read it through open dataset, is it possible to populate dynamic value to a variable in the text file. and is it possible to define a variable at any place in the text file?
after this the program will send the internal table for emailing.
thanks.Hi, If this file on server is a email template you can put some tags / marks and you can change it after you read it with OPEN DATASET / READ...
Sample:
OPEN DATASET p_file FOR INPUT IN TEXT MODE ENCODING DEFAULT.
CHECK sy-subrc EQ 0.
DO.
READ DATASET p_file INTO lv_string.
IF sy-subrc EQ 0.
EXIT.
ENDIF.
REPLACE ALL OCCURENCES OF '((SYSTEM_ID))' WITH sy-sysid.
APPEND input_file_tab.
ENDDO.
CLOSE DATASET p_file.
on file there's a line with:
This email was generated on server ((SYSTEM_ID))
It will be translated to (sy-sysid = DEV):
This email was generated on server DEV
This is a "variable" like that you can use. -
Query plan and negative value in where
I have a question about this query:
select g.col1,
g.col2
from tab1 g,
tab2 part
where part.col3 <> 0
and g.col4 = 'PRO3'
and g.col2 = part.col5
and g.cod7 = -1
This is the execution plan:
SELECT STATEMENT, GOAL = ALL_ROWS
HASH JOIN
INDEX FAST FULL SCAN SYS_C00254422 14 22453 516419
TABLE ACCESS FULL TAB2 920 67458 1079328
If I change the select in this way:
select g.col1,
g.col2
from tab1 g,
tab2 part
where part.col3 <> 0
and g.col4 = 'PRO3'
and g.col2 = part.col5
and -g.cod7 = 1
I have a new query plan:
SELECT STATEMENT, GOAL = ALL_ROWS
NESTED LOOPS
INDEX FAST FULL SCAN SYS_C00254422
TABLE ACCESS BY INDEX ROWID TAB2
INDEX UNIQUE SCAN SYS_C00254336
Oralce use a nested loop and the index of the table TAB1 and doesn't do the hash join.
Why?
I use oracle 10g
Message was edited by:
user613483
Message was edited by:
user613483SQL> desc TAB1
Name Null? Type
COL1 NOT NULL VARCHAR2(5)
COL4 NOT NULL VARCHAR2(5)
COL2 NOT NULL VARCHAR2(15)
COL7 NOT NULL NUMBER(3)
DTCOL8 NOT NULL DATE
DRcol9 DATE
LEVcol10 NUMBER(3)
COL11 VARCHAR2(30)
COD12 VARCHAR2(15)
LEV13 NUMBER(3)
COD14 VARCHAR2(15)
LEV15 NUMBER(3)
COD16 VARCHAR2(15)
LEVN17 NUMBER(3)
COD18 VARCHAR2(15)
LEV19 NUMBER(3)
CODNOD20 VARCHAR2(15)
LEVNO21 NUMBER(3)
CODNOD22 VARCHAR2(15)
LEVN23 NUMBER(3)
COD24 VARCHAR2(15)
LEV25 NUMBER(3)
CODNOD26 VARCHAR2(15)
L27 NUMBER(3)
CODN28 VARCHAR2(15)
LEV28 NUMBER(3)
D30 DATE
SQL> desc tab2
Name Null? Type
COL5 NOT NULL VARCHAR2(15)
DESY1 VARCHAR2(60)
DESPA VARCHAR2(60)
CODS VARCHAR2(5)
CODNI VARCHAR2(5)
CODZO VARCHAR2(10)
CODC VARCHAR2(5)
CDFIS VARCHAR2(30)
CO VARCHAR2(30)
CODVATI VARCHAR2(30)
COT1 VARCHAR2(15)
COT2 VARCHAR2(15)
DCAT3 VARCHAR2(15)
CAT4 VARCHAR2(15)
COD VARCHAR2(15)
COU VARCHAR2(5)
FLG NOT NULL NUMBER(1)
COT VARCHAR2(20)
FLGCUSTD NOT NULL NUMBER(1)
CODMOE VARCHAR2(5)
FLG NOT NULL NUMBER(1)
FLGC NOT NULL NUMBER(1)
CODMOP VARCHAR2(5)
CODC VARCHAR2(15)
COELIV VARCHAR2(15)
CONC VARCHAR2(15)
COGMT VARCHAR2(10)
COR VARCHAR2(5)
COOUP VARCHAR2(15)
VALDIT NUMBER(14,2)
DTREDIT DATE
DTRE DATE
DTD DATE
DST DATE
DK DATE
COCK VARCHAR2(5)
CMOD VARCHAR2(5)
FNN NOT NULL NUMBER(1)
PGDCL VARCHAR2(60)
PDB VARCHAR2(60)
CXTEL VARCHAR2(15)
ILCK VARCHAR2(15)
DTTART DATE
PVERY NUMBER(9)
FLTUAL NOT NULL NUMBER(1)
DVER DATE
RIFE_INTERNO VARCHAR2(15)
DATADATE
ESENZIONE DATE
NMSENZIONE VARCHAR2(15)
VSED NUMBER(14,2)
EORD NOT NULL NUMBER(1)
EM VARCHAR2(30)
COTER VARCHAR2(15)
COUST VARCHAR2(15)
CORINT VARCHAR2(15)
TURFACE NUMBER(6)
ODSURFACE NUMBER(6)
ALINDEXPOT NUMBER(6)
SSE NUMBER(6)
NUSEATTR NUMBER(6)
NUETTI NUMBER(6)
CORTY VARCHAR2(15)
DESEC VARCHAR2(60)
QTEARI NUMBER(6)
TOFACE NUMBER(6)
COD VARCHAR2(30)
FLGCI NUMBER(1)
FLGC NUMBER(1)
COL3 NUMBER(1)
FLGCOL33 NUMBER(1)
Query plan of the original select:
1 SQL_ID 51kgr2x36h3y4, child number 0
2 -------------------------------------
3 select g.col1, g.col2 from tab1 g, tab2 part
4 where part.col3 <> 0 and g.col4 = 'PRO3' and g.col2 =
5 part.col5 and g.col7 = -1
6
7 Plan hash value: 2145701647
8
9 ---------------------------------------------------------------------------------------
10 | Id | Operation | Name | Rows | Bytes | Cost (%CPU)| Time |
11 ---------------------------------------------------------------------------------------
12 | 0 | SELECT STATEMENT | | | | 938 (100)| |
13 |* 1 | HASH JOIN | | 22485 | 856K| 938 (17)| 00:00:05 |
14 |* 2 | INDEX FAST FULL SCAN| SYS_C00254422 | 22453 | 504K| 14 (8)| 00:00:01 |
15 |* 3 | TABLE ACCESS FULL | TAB2 | 67458 | 1054K| 920 (16)| 00:00:05 |
16 ---------------------------------------------------------------------------------------
17
18 Predicate Information (identified by operation id):
19 ---------------------------------------------------
20
21 1 - access("G"."COL2"="PART"."COL5")
22 2 - filter(("G"."COL7"=(-1) AND "G"."COL4"='PRO3'))
23 3 - filter("PART"."COL3"<>0)
24
Sql plan of the second quesry:
1 SQL_ID g1hc2xj88sc7x, child number 0
2 -------------------------------------
3 select g.col1, g.col2 from tab1 g, tab2 part where
4 part.col3 <> 0 and g.col4 = 'PRO3' and g.col2 = part.col5
5 and -g.col7 = 1
6
7 Plan hash value: 601419963
8
9 ----------------------------------------------------------------------------------------------
10 | Id | Operation | Name | Rows | Bytes | Cost (%CPU)| Time |
11 ----------------------------------------------------------------------------------------------
12 | 0 | SELECT STATEMENT | | | | 512 (100)| |
13 | 1 | NESTED LOOPS | | 249 | 9711 | 512 (1)| 00:00:03 |
14 |* 2 | INDEX FAST FULL SCAN | SYS_C00254422 | 248 | 5704 | 15 (14)| 00:00:01 |
15 |* 3 | TABLE ACCESS BY INDEX ROWID| TAB2 | 1 | 16 | 2 (0)| 00:00:01 |
16 |* 4 | INDEX UNIQUE SCAN | SYS_C00254336 | 1 | | 1 (0)| 00:00:01 |
17 ----------------------------------------------------------------------------------------------
18
19 Predicate Information (identified by operation id):
20 ---------------------------------------------------
21
22 2 - filter(((-"G"."COL7")=1 AND "G"."COL4"='PRO3'))
23 3 - filter("PART"."COL3"<>0)
24 4 - access("G"."COL2"="PART"."COL5")
25
Index used:
Primary key on tab2 SYS_C00254336:
alter table TAB2
add primary key (COL5)
using index
tablespace name_tablespace;
Primary key on tab1 SYS_C00254422;
alter table TAB1
add primary key (COL1, COL4, COL2, COL7, DTCOL8 )
using index
tablespace name_tablespace;
Message was edited by:
user613483
Message was edited by:
user613483 -
Webi displays null and wrong values after BW upgraded to SP6
Hi,
Webi report retrieves blank values after BW Backend upgraded to SP6.
We were on SAP EHP 1 for SAP Net Weaver 7.0 and SP4. On the BO side we are on BO XI R/3 FP 2.1.
Once we add new filters to a simple webi query the webi displays the null values for the characteristics which already exist in the report and more ever wrong values displayed for few columns. We have checked the MDX query in BW by using 'MDXTEST' and the results are good.
It looks like that it is a rendering issue in Webi side and exactly no idea...
Can anybody know how to fix the issue or any SAP notes exists for resolving this?
Thank you,
Regards,
SatyaHi Ingo,
We are also facing the same issue that satya is facing.
We have developed the reports in BO XI 3.1 SP2 FP2.1 and SAP BW 7.01 EHP1 which was running correctly and showing the right result.
But we upgraded the BW system to SAP BW 7.01 SP6 and check the WebI reports which was showing the unexpected results. ( instead of n rows it shows only 1 row for any query without dimension values)
So we upgraded the BO sys to BO XI 3.1 SP2 FP 2.6 and checked the result but no luck with that also.
The workaround i found is i must need to add the Node objects from the universe in the Query which are also used in the query filter of Web Intelligence. But this is not reliable as we need to change all the developed queries.
We have also tried to perform the things shown in the notes but no MDX trace is enabling.
Please let me know if there is any other solution. -
Replacing NULL and EmptyString('') with "Unknown" in SSRS parameter dropdown
All,
What I want to do is, in the SSRS parameter drop down, instead of showing NULL and Blank values(), i want to categorize them as "Unknown", so, if the user selects "Unknown" from the SSRS drop down parameter, he should be able to see all
the records that have NULL values or empty strings in that particular column in the result set.
Can you tell me, how should I handle it in my main stored proc as well as in the dataset?
Right now, i have something like this:
Where
(t1.name in (select value from dbo.Split(@TName,',')) OR @TName IN ('All'))
-- Where t1.Name has empty strings and NULL values. Both of these values should be categorized under "Unknown"
-- How would the dataset query look like? Right now I have this query for populating the drop down for that parameter:
Select All
UNION
Select Distinct Name
Order BY 1Hello,
Please refer to the following stored procedure:
SELECT
CASE WHEN TName IS NULL OR TName = ''
THEN 'Unknown' ELSE TName END AS TName
From DemoTable
Then, use following query code to get the parameter values:
SELECT Distinct
CASE WHEN TName IS NULL OR TName = '' THEN 'Unknown'
ELSE TName END AS TName
FROM DemoTable
Regards,
Alisa Tang
Alisa Tang
TechNet Community Support -
How to include NULL in multi value parameters
Good Morning,
I'm posting this question after i tried other links and was not successful. I'm using a report builder to create a report. SSRS2008R2.
I have a sql to get the data into the data set. Source is ORACLE DB. The query is pulling lastname,firstname,dob,joindt,divname. I created a parameter in the SQL :
WHERE DIVNAME IN (:divname).
I created another dataset (select distinct divname from table2) and selected the paramter properties to get the values from the second dataset and selected it to be multivalued. However the user wants to see the NULL's or BLANKS that are in the DIVNAME.
Can some one please tell me as how i can acheive this?
When i run the query in the sql plus i get (null) values as well, but when in the second dataset i run the query i just get the DISTINCT divnames and a "BLANK" field (in SSRS)
ThanksHi thinkingeye,
According to your description, you want to include the null values in your multiple values parameter. Right?
In Reporting Services, we can't allow both null values and multiple values in a parameter. In this scenario, since you have created a dataset for getting distinct divname, we suggest you try "select distinct isnull(divname,-1) from [table]" in this
dataset so that all the null values will return -1. Also using isnull() function to replace divname in other query. This might be the most effective work around.
Reference:
Null and Multi-value parameter possible
Include Null Value Multi-Value Parameter list
If you have any question, please feel free to ask.
Best Regards,
Simon Hou -
Passing values to range variable
Hi,
I am using a range variable in the planning function.
In WAD, I am using two dropdown box for selecting the from and to range.
I am calling the planning function from WAD, on a button click.
In Data binding, i could bind the variable, to only one dropdown box.
How to pass the from and to values to the variable from two dropdown box.
Thanks in advance for your help.
Regards,
Suresh.Hi,
See if this helps
http://wiki.sdn.sap.com/wiki/display/BI/BI-IPPassingVariableValuestoPlanningFunctionsfromBEx+Analyzer
pratyush -
How to check empty string and null? Assign same value to multiple variables
Hi,
1.
How do I check for empty string and null?
in_value IN VARCHAR2
2. Also how do I assign same value to multiple variables?
var_one NUMBER := 0;
var_two NUMBER := 0;
var_one := var_two := 0; --- Gives an error
ThanksMichaelS wrote:
Not always: Beware of CHAR's:
Bug 727361: ZERO-LENGTH STRING DOES NOT RETURN NULL WHEN USED WITH CHAR DATA TYPE IN PL/SQL:
SQL> declare
2 l_str1 char (10) := '';
3 l_str2 char (10) := null;
4 begin
5
6 if l_str1 is null
7 then
8 dbms_output.put_line ('oh STR1 is null');
9 elsif l_str1 is not null
10 then
11 dbms_output.put_line ('oh STR1 is NOT null');
12 end if;
13
14 if l_str2 is null
15 then
16 dbms_output.put_line ('oh STR2 is null');
17 elsif l_str2 is not null
18 then
19 dbms_output.put_line ('oh STR2 is NOT null');
20 end if;
21 end;
22 /
oh STR1 is NOT null
oh STR2 is null
PL/SQL procedure successfully completed.
SQL> alter session set events '10932 trace name context forever, level 16384';
Session altered.
SQL> declare
2 l_str1 char (10) := '';
3 l_str2 char (10) := null;
4 begin
5
6 if l_str1 is null
7 then
8 dbms_output.put_line ('oh STR1 is null');
9 elsif l_str1 is not null
10 then
11 dbms_output.put_line ('oh STR1 is NOT null');
12 end if;
13
14 if l_str2 is null
15 then
16 dbms_output.put_line ('oh STR2 is null');
17 elsif l_str2 is not null
18 then
19 dbms_output.put_line ('oh STR2 is NOT null');
20 end if;
21 end;
22 /
oh STR1 is null
oh STR2 is null
PL/SQL procedure successfully completed.
SQL> SY.
Maybe you are looking for
-
ITunes keeps restoring deleted songs/won't delete songs
I just realized that I posted this question accidentally in the iTunes for Mac forum so I figured I'd ask here since I'm actually a PC user. I tried absolutely every suggestion in this thread (https://discussions.apple.com/message/17046601#17046601)
-
Essbase Cube Hierarchy Types in OBIEE 11g
All, Is there any documentation anywhere that explains what the different hierarchy types are for Essbase? I see the following listed, but am totally confused as to what each means and when it should be used. 1. Fully balanced - Basically a flattened
-
Hello Gurus, We are transferring an asset from a cap asset class to low value asset and while doing so the system throws errror that "Transfer not possible (Different depreciation types)" only in the case where my depr. key in Special Dep. Area 10 ha
-
Unable to download programs OS 10.6.8
Hello. In seeking to download any application or program I receive the following message: /Users/Jo/Downloads/xUI1qKZH.part could not be saved, because you cannot change the contents of that folder. Change the folder properties and try again, or try
-
MS CRM 2011 vs MS CRM 4.0
Dear All Our Current Version is MS CRM 4.0 Do you recommend us to upgrade to the new version at some stage this year? Or we can continue with the current version as the users gets used to it. we also have heavy customizations, javascripts, reports a