Is oracle 9i able to install in XP Professional

Dear all,
I want to ask is somebody tried install oracle 9i into XP Professional?
Is Oracle 9i able to be installed into XP Professional?
Thanks
Francis SZE

I have installed Oracle 9i onto RedHat many times without any real problems. Make sure that you follow the installation guide and carry out the pre-reqs (there are some packages that you may need to install on top of RedHat depending on your version) and you need to change some kernel settings in /etc/sysctl.conf as well as create the oracle system user and oinstall group for it.
Personally, I come from a UNIX / Linux backgroud so I find installs onto UNIX/Linux servers very easy and so far as stability goes, I've never had any problems.
regards
R

Similar Messages

Cannot install adobe flash professional cs5.5

Hi
I am not able to install adobe flash professional cs5.5 as it takes a lot of time to install and uses complete cpu resources and because of this the cpu and the whole computer heats up and shuts off.
I tried to prevent the heating by putting ice all around the the computer external computer fans and everything else to keep the computer cool but still the computer shuts off.ter details
Pls. help me. I need it urgently.
My computer details are-
Acer Aspire 5710
Intel Core Duo processor T2450
4GB DDR2
Windows 7 Ultimate 32-bit
The computer is 4yrs old.
Thank You!

You should try contacting someone at Adobe Customer Support or Tech support (?). While it would be nice, Adobe personell do not monitor these forums as a general practice. These are user-to-user forums and getting help or attention from folks at Adobe by posting here is less likely to happen than if you try contacting them directly.

We could not able to install Oracle Linux 64 bit version 5.0 in graphical mode

We could not able to install Oracle Linux 64 bit version 5.0 in graphical mode. We are getting the error message as
"Probing for video card :Intel corporation Unknown device 0152"
We also tried as
boot: Linux vga=2
boot linux resolution 1024x768
boot Linux noprob
boot Linux skipdd
But every time we got this message
NB: We could able to install in text mode as
boot: Linux text.
But our requirement Linux in graphical mode

1344675 wrote:
We could not able to install Oracle Linux 64 bit version 5.0 in graphical mode. We are getting the error message as
"Probing for video card :Intel corporation Unknown device 0152"
We also tried as
boot: Linux vga=2
boot linux resolution 1024x768
boot Linux noprob
boot Linux skipdd
But every time we got this message
NB: We could able to install in text mode as
boot: Linux text.
But our requirement Linux in graphical mode
Why is your "requirement" to install in graphical mode? Once you are past the installation itself, the only thing that buys you is that your server will have been configured to boot up to runlevel 5, running a graphical desktop (gnome or kde, I forget which). And what does THAT buy you on a server?
I do not run ANY of my Linux servers "in graphical mode" -- running a graphical desktop. Nor did I run a graphical desktop when I had Solaris, AIX, or HP-UX servers.

I am not able to install the toad version for Oracle 11g

Hi,
1] I am not able to install the "Toad for Oracle 11.5 Freeware" it's expire in Oct-2013.Now i am trying to download the new version but the same s/w downloaded and at the time installation it's shown me that this s/w is expire and install new version
2] Also installed "Toad for Oracle Version 9.0" vesrion it's installed Successfully but when i am trying to start the toad it's shown msg as "Oracle Instant client is not installed.
3] In "Toad for Oracle Version 9.0" can i exceute the queryies from Oracle 11g database.
Kindly suggest to way out,
Regards,
Sachin

user7197586 wrote:
Hi
Thanks for update.
If i want to use the Toad,can you please suggest
Regards,
Sachin
Re-asking won't help you to get help, especially when it's for non-Oracle product.
You've been advised to look at Toad side. Please go ahead.
-- locking thread --
Nicolas (moderator).

Not able to install oracle 10.2.0.4

we are trying to install SAP ERP 6.0 SR3 with oracle 10.2.0.4 on windows server 2008 R2 enterprise, but we are get getting some error
The dump number for oracle was 51036975.
We are not able to install oracle.
Can any one find me a solution for this problem

RAVITEJA8192 wrote:
we are trying to install SAP ERP 6.0 SR3 with oracle 10.2.0.4 on windows server 2008 R2 enterprise, but we are get getting some error
What was the error ?
Thanks

Not able to install oracle fial over software

Hi all,
This is SAP Evironment
SAP : ECC6.0
OS : WIN2003
ORACLE : 10g
I am not able to install Oracle failover software.
I saw in note 986758
Change the last line of the script sapofs.cmd from the temporary
directory of
@"%rootdir%\install\setup.exe"
to
@"%rootdir%\install\setup.exe" -jreLoc=
c:\TEMP\OUIIA64\stage\Components\
oracle.swd.jre\1.4.2.11.0\1\DataFiles
When doing so, replace the name of the directory "C:\TEMP\OUIIA64"
with the name of the temporary directory that you created during the
installation of the Oracle software database
I am not understanding what exactly this meaning.
Please anybody help me in the loop
Thanks&regards
Ramakrishna

Hi Ramakrishna reddy ,
Installing Oracle 10.2 on Itanium 2 systems on Windows contains the following sections.
1) the Microsoft HotFixes required for the installation and operation of the database
2)the installation of the Oracle 10gR2 database software
3) the installation of the current Oracle 10gR2 patch set
4) the installation of the Oracle FailSafe server software 3.3.4.
I guess the first 3 sections you have completed. The 4th section (installing Oracle FailSafe server) point 3 says the following
Change the last line of the script sapofs.cmd from the temporary
directory of
   @"%rootdir%\install\setup.exe"
to
   @"%rootdir%\install\setup.exe" -jreLoc=
   c:\TEMP\OUIIA64\stage\Components\
   oracle.swd.jre\1.4.2.11.0\1\DataFiles
When doing so, replace the name of the directory "C:\TEMP\OUIIA64" with the name of the temporary directory that you created during the installation of the Oracle software database in step 3.
Here the step 3 points to the section 2 (installation of the Oracle 10gR2 database software). i.e it is referring to the point 3. i.e
Create a temporary directory, for example, C:\TEMP\OUIIA64. Note
that this directory is also required for the installation of Oracle
Failsafe (see below).
You have to replace directory "c:\TEMP\OUIIA64" with what you have given as temp directory while installing Oracle 10gR2 database software.
Hope this clarifies now.
Regards,
Arun.

I am planning to buy macbook pro,as i am working as a oracle developer,so i want to ask will i be able to install oracle 10G or above versions on my mac...??

i am planning to buy macbook pro,as i am working as a oracle developer,so i want to ask will i be able to install oracle 10G or above versions on my mac...??

did you get a satisfactory response on your question re oracle 10g on os x snow leopard? I am curious as I have been 'struggling' with it for a few days now. To my experience thusfar, the oracle files provided are not up to date with current java versions or os x leopard and require some tweaking. my own answer to your question is that it does appear that you can install and run oracle 10g on mac os x snow leopard, but it seems to be a little hacky to get through it all. Some information here, other information there, haven't yet found a single source that has all the play by play and gotcha fixes documented. I am rsisting nuking my debian install on amd64 just to put fedoracore which does appear to be a supported env for oracle 10 on linux.

Cannot able to install Oracle VM Manager Release 3.1.1 Installer

I could not able to install the VM manager in the demo mode, can someone please help.....
[root@flfspdlan mnt]# ./runInstaller.sh
Oracle VM Manager Release 3.1.1 Installer
Oracle VM Manager Installer log file:
/tmp/install-2013-01-16-165418.log
Please select an installation type:
1: Demo
2: Production
3: Uninstall
4: Help
Select Number (1-4): 1
Starting demo installation ...
The Demo installation type will use an XE database. The usage of XE is for demo purposes only and is not supported for production. Please do not plan to start with XE and migrate to a supported version of the database as this may not be possible. For production environments or any long term usage please use the "Production" option with an SE or EE database.
1: Continue
2: Abort
Select Number (1-2): 1
Verifying installation prerequisites ...
[root@flfspdlan mnt]#
Here is the log........
01-16 16:43 ovm.installer DEBUG Writing temporary files to '/tmp/ovmbsrbR5'
01-16 16:43 system.fs DEBUG isfile:/etc/sysconfig/ovmm
01-16 16:43 system.fs DEBUG path /etc/sysconfig/ovmm is not a file
01-16 16:43 ovm.installer INFO
01-16 16:43 system.console DEBUG Please select an installation type:
01-16 16:43 system.console DEBUG 1: Demo
01-16 16:43 system.console DEBUG 2: Production
01-16 16:43 system.console DEBUG 3: Uninstall
01-16 16:43 system.console DEBUG 4: Help
01-16 16:43 system.console DEBUG
01-16 16:43 ovm.installer DEBUG Manager UUID argument set to : 'None'
01-16 16:43 ovm.installer INFO
01-16 16:43 ovm.installer INFO Starting demo installation ...
01-16 16:43 ovm.installer INFO
01-16 16:43 system.console DEBUG The Demo installation type will use an XE database. The usage of XE is for
demo purposes only and is not supported for production. Please do not plan to start with XE and migrate to a
supported version of the database as this may not be possible. For production environments or any long term usa
ge please use the "Production" option with an SE or EE database.
01-16 16:43 system.console DEBUG 1: Continue
01-16 16:43 system.console DEBUG 2: Abort
01-16 16:43 system.console DEBUG
01-16 16:43 ovm.installer.prerequisites INFO
01-16 16:43 ovm.installer.prerequisites INFO Verifying installation prerequisites ...
01-16 16:43 ovm.installer.prerequisites DEBUG * Checking if run by root user
01-16 16:43 ovm.installer.prerequisites DEBUG * Checking if OS is at least Oracle Linux version 5.5
01-16 16:43 system.process DEBUG system.process.start
01-16 16:43 system.fs DEBUG Copy file from /tmp/ovmm-installer.selfextract_x11568/install-2013-01-16-16430
5.log to /tmp
01-16 16:43 system.fs DEBUG isfile:/tmp/ovmm-installer.selfextract_x11568/install-2013-01-16-164305.log
01-16 16:43 system.fs DEBUG path /tmp/ovmm-installer.selfextract_x11568/install-2013-01-16-164305.log is a
file
01-16 16:43 system.fs DEBUG Creating directory if not exists /
01-16 16:43 system.fs DEBUG Directory trying to create: [] already exists

[root@ ~]# cat /etc/redhat-release
Red Hat Enterprise Linux Server release 5.8 (Tikanga)
[root@~]# uname -a
Linux 2.6.18-194.el5 #1 SMP Tue Mar 16 21:52:39 EDT 2010 x86_64 x86_64 x86_64 GNU/Linux
The firewall is already disabled. Is that the OS is not comnpatible.
But I read in the Oracle VM documents, that the Oracle VM is compatible for RHEL 5.5 and above.....

Not able to install Gcc on Oracle Solaris-11-express

Hi,
I installed Solaris-11-express using live cd ans also text based cd on VM.
In package manager I could see gcc package but its not getting installed . Its throwing me error .
So I manually downloaded the gcc tar file and still not able to install. please help.

I am trying to install iozone, this requires gcc, now gcc is installed properly but iozone is not installing.I am pasting the error with this,
root@solaris:~/iozone3_353/src/current# make Solaris10gcc-64
Building iozone for Solaris10gcc-64
gcc -O -c -Dunix -DHAVE_ANSIC_C -DASYNC_IO -D__LP64__ \
-D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Dsolaris \
-m64 libbif.c -o libbif10-64.o
gcc -O -c -Dunix -DHAVE_ANSIC_C -DASYNC_IO -D__LP64__ \
-D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Dsolaris \
-DNAME='"Solaris10gcc-64"' -m64 libasync.c -o libasync10-64.o
gcc -c -O -Dunix -DHAVE_ANSIC_C -DASYNC_IO \
-D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Dsolaris \
-DNAME='"Solaris10gcc-64"' -m64 iozone.c -o iozone_solaris10gcc-64.o
Building fileop for Solaris10gcc-64
gcc -c -O -m64 fileop.c -o fileop_Solaris10gcc-64.o
Building the pit_server
cc -c pit_server.c -o pit_server.o
gcc -O -m64 iozone_solaris10gcc-64.o libasync10-64.o libbif10-64.o \
          -lthread -lpthread -lposix4 -lnsl -laio \
          -lsocket -o iozone
gcc -O -m64 fileop_Solaris10gcc-64.o -o fileop
gcc -O -m64 pit_server.o -lthread -lpthread -lposix4 \
          -lnsl -laio -lsocket -o pit_server
ld: fatal: file pit_server.o: wrong ELF class: ELFCLASS32
ld: fatal: file processing errors. No output written to pit_server
collect2: ld returned 1 exit status
make: *** [Solaris10gcc-64] Error 1
Edited by: 817795 on Dec 9, 2010 11:03 PM

Not able to install oracle DB 11.2.0.2 on Linux

Hi,
I tried installing Oracle DB 11.2.0.2 on RHEL 5.2, 5.5 and 6.0 but all the times, I am getting an error saying
"/tmp/database/install/.oui: cannot execute binary file"
The Kernel version for RHEL 6.0 is 2.6.32.71. Both the zip files were extracted appropriately. This is causing a lot of havoc. Please suggest a suitable solution for this.
Your immediate reply will be highly appreciated.

Yes, I have downloaded the correct package. Its a 64 bit Linux and have followed all the pre-requisites from the link http://docs.oracle.com/cd/E11882_01/install.112/e24326/toc.htm
All the package versions are the latest and none of the steps have been missed. I am running this in a VM and on standard Intel Server(not IBM Server). Hence, please help me outI'll assume you haven't posted the full error message, which is possibly why others like Ed are pointing at a different direction. I still think you are running into an issue mentioned in other threads (e. g. {message:id=9543783}, as referenced by Helios above) and MOS (e. g. 980695.1), where this message is usually generated by the runInstaller wrapper when some platform dependent requirements are not fulfilled.
Could you please post the complete command (including its base path) you execute to run the installer and the output of the following commands mentioned (equally or similarly) in the installation guide
uname -a
cat /proc/version
/sbin/sysctl -a |grep -v net.
ulimit -Sn
ulimit -Hn
ulimit -Su
ulimit -Hu
ulimit -Ss
ulimit -HsAnd did you configure the xhost properly? You can't run the graphical installer without X-Server...
-Udo

Oracle FOD Storefront demo install problem

I"m using Jdev Studio V 11.1.1.4.0 and I downloaded PS3 (build 5923) demo version. Firstly, do I have the right demo version for my Jdev?
Second, I am not able to install this. My build.properties looks like this:
# Master Ant properties file for Fusion Order Demo
# All build files refer to this master list of properties
# Continuous builds override these settings
# $Id: build.properties 812 2007-02-20 07:14:33Z lmunsing $
# Base Directory for library lookup
jdeveloper.home=C:/JdevInstall
src.home=..//..
# JDBC info used to create Schema
jdbc.driver=oracle.jdbc.OracleDriver
jdbc.urlBase=jdbc:oracle:thin:@<dbserver_internal_ip>
jdbc.port=1521
jdbc.sid=orclDW
# Information about the default setup for the demo user.
db.adminUser=SYSTEM
db.demoUser=FOD
db.demoUser.password=<SYSPASS>
db.demoUser.tablespace=USERS
db.demoUser.tempTablespace=TEMP
when I try to run build.xml, I get the the following errors
Buildfile: C:\fusiondemox\PS3_tag2\Infrastructure\Ant\build.xml
init:
[javac] Compiling 1 source file to C:\fusiondemox\PS3_tag2\Infrastructure\Ant\classes
setProperties:
createDatabase:
refreshSchema:
BUILD FAILED
C:\fusiondemox\PS3_tag2\Infrastructure\Ant\build.xml:51: The following error occurred while executing this line:
C:\fusiondemox\PS3_tag2\Infrastructure\DBSchema\build.xml:91: The following error occurred while executing this line:
C:\fusiondemox\PS3_tag2\Infrastructure\DBSchema\build.xml:56: The following error occurred while executing this line:
C:\fusiondemox\PS3_tag2\Infrastructure\DBSchema\build.xml:28: C:\wlserver_10.3\server\lib not found.
Total time: 8 seconds
I searched the forum and I noticed a couple of similar issues where the build cannot find the server lib. I have tried some of the suggestions like changing the direction of the backslash '/', but thiese errors persist.
Also the second error (91) refers to 'arg2="${db.demoUser.password}"/>' in the build.xml, which is the demo user PW specified in the build.properties. So I don't understand why this would create an error since this PW is already specified. Also these errors are still the same whether I enter the correct admin password or an incorrect admin password.
Any advice is greatly appreciated. Thanks, J

Try:
jdeveloper.home=C:/JdevInstall/jdeveloper
John

Not able to Install Webcenter site 11g R1 (11.1.1.6.0) in my local PC

1. I downloaded hsqldb 2.2.8 and set up the database, the connection properties are
     TYPE      :     HSQL Database Engine In-Memory
     Driver     :     org.hsqldb.jdbc.JDBCDriver
     URL     :     jdbc:hsqldb:mem:.
     USER     :     SA
     Password:
2. I started the database server and created a sample table 'emp'.
3. Downloaded tomcat 6.0.35 and in context.xml i did the below entry to make the hsqldb connection, and copies hsqldb.jar into lib folder of Tomcat
     <Resource auth="Container" defaultTransactionIsolation="READ_UNCOMMITTED" description="Tomcat Connection Pool" driverClassName="org.hsqldb.jdbc.JDBCDriver" initialSize="1" maxActive="100" maxWait="7500" name="csDataSource" password="" scope="Shareable" type="javax.sql.DataSource" url="jdbc:hsqldb:hsql://localhost/" username="SA"/>
4. In catalina.properties i setup the classpath for cas.properties or else the tomcat throwing the error saying not able to identify cas.properties.
The entry is given below
shared.loader=C:/Sri/installables/fatwire/bin
5. From oracle i downloaded ofm_sites_generic_11.1.1.6.0_disk1_1of1.zip i extracted all the content
6. To install the webcenter site content server, i clicked csInstall.bat under C:\Sri\FatWire\ContentServer
7. It started and installing the server upto 70% then a dialog box pop up with the following message
          Do not click OK until you have completed all of the following steps:
          1. If your platform requires you to manually deploy the Oracle
          WebCenter Sites application, deploy Oracle WebCenter Sites now. Otherwise,
          continue with step 2.
          2. If you wish to customize your Oracle WebCenter Sites installation
          and require access to Oracle WebCenter Sites's property files,
          click the Property Editor button.
          3. Restart your application server.
          4. Click Test to test your installation and make sure all tests
          are successful.
          5. If the tests are successful, click OK.
8. Then when i click Test button, i got the following messages
     The status is an follows :
          HelloCS has failed
          Ping DB has failed
          DB Permissions has failed
9. In the log file install_log under <fatwire_instll_dir>/ominstallinfo, i saw the following entries
[2012-07-27 09:10:57.134][CS.INSTALL][INFO] InstallActionManager.orderActions() : StartAppServer Action found at = (-1)
[2012-07-27 09:10:57.165][CS.INSTALL][INFO] InstallActionManager.orderActions() : StartAppServer Action found at = (-1)
[2012-07-27 09:11:43.144][CS][ERROR] com.fatwire.cs.core.http.HttpAccessException: org.apache.http.conn.HttpHostConnectException: Connection to http://PRK-SSUNDARAR.us.ad.xxxx.com:80 refused
[2012-07-27 09:11:43.175][CS.INSTALL][INFO] CSSetupEngine.postURL: PostURL failed for http://PRK-SSUNDARAR.us.ad.xxxx.com:80/cs/HelloCS
:: ERROR = No response was received from the server
[2012-07-27 09:11:44.236][CS][ERROR] com.fatwire.cs.core.http.HttpAccessException: org.apache.http.conn.HttpHostConnectException: Connection to http://PRK-SSUNDARAR.us.ad.xxxx.com:80 refused
[2012-07-27 09:11:44.236][CS.INSTALL][INFO] CSSetupEngine.postURL: PostURL failed for http://PRK-SSUNDARAR.us.ad.xxxx.com:80/cs/Install?test=test&ReInit=FALSE&CSInstallType=single&CSInstallAccountName=ContentServer&CSInstallAccountPassword=675286278df204915f228fd298c09388&CSInstallDirectory=C%3A%2FSripY%2Finstallables%2Ffatwire&CSInstallAppName=fwadmin&CSInstallAppPassword=675286278df204915f228fd298c09388
:: ERROR = No response was received from the server
[2012-07-27 09:12:55.005][CS.INSTALL][INFO] CSSetupEngine.testConnectionAction: Testing user configuration and database connectivity.
What could went wrong here?
regards
Sri

Hi Tony,
I don't have mac o/s so am using Windows XP. I tried to open "Download the scripts and instructions here" from your blog but
it is opening a new window in the browser with some gybrish characters.
Here is what i did, as i explained it in my earlier post, now also i am facing the
same issue while setting up the server in GUI mode but in the log file it is showing
different exception now compare to the earlier one. I will explain the step by step approach of mine
1. start the Hsqldb2.2.8 in webserver mode (will the latest version cause any issue here?)
2. started the tomcat 6.0.35
3. As explained it in oracle site document for "installing webcenter sites in Tomcat" i did
the below changes
1. i downloaded the installation zip file and extracted it in my local m/c. Note:
this is not my installation folder.
2. then i went to cs-cache.xml,linked-cache.xml, ss-cache.xml and cas-cache.xml and
maintain the unique entries for multicastGroupAddress, multicasegroupport and timeToLive.
[I did the modification in the extracted folder thinking that it will get copied while
doing the installation, and my assumption is correct in the tomcat while deploying later i
saw all my entries in corresponding files ]
3. In jbossTicketCacheReplicationConfig.xml i modified mcast_addr="239.255.0.0" and
mcast_port as 4447
4. Then i started installing the content server, i gave the host name and port "localhost"
and "8080" wherever it is asking.
5. i clickec express installation instead of Custom settings
6. After installing it fro 73% again i got the same issue
7. When i was going through all the issues logs i found below issues.
a) it was not able to identify cache bean reference inside ticketRegistry.xml so i
commented out JBossCacheTicketRegistry and started using DefaultTicketRegistry in ticketRegistry.xml

     <bean id="ticketRegistry" class="org.jasig.cas.ticket.registry.DefaultTicketRegistry"
          />
     
Again i restarted the Tomcat server.....
b) In sites.log file i notice an exception
          org.springframework.beans.factory.BeanCreationException: Error creating bean with name 'ssolistener' defined in class path resource [SSOConfig.xml]: Instantiation of bean failed; nested exception is java.lang.ExceptionInInitializerError
     at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.instantiateBean(AbstractAutowireCapableBeanFactory.java:883)
     at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.createBeanInstance(AbstractAutowireCapableBeanFactory.java:839)
     at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.doCreateBean(AbstractAutowireCapableBeanFactory.java:440)
     at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory$1.run(AbstractAutowireCapableBeanFactory.java:409)
     at java.security.AccessController.doPrivileged(Native Method)
     at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.createBean(AbstractAutowireCapableBeanFactory.java:380)
     at org.springframework.beans.factory.support.AbstractBeanFactory$1.getObject(AbstractBeanFactory.java:264)
     at org.springframework.beans.factory.support.DefaultSingletonBeanRegistry.getSingleton(DefaultSingletonBeanRegistry.java:221)
     at org.springframework.beans.factory.support.AbstractBeanFactory.doGetBean(AbstractBeanFactory.java:261)
     at org.springframework.beans.factory.support.AbstractBeanFactory.getBean(AbstractBeanFactory.java:185)
     at org.springframework.beans.factory.support.AbstractBeanFactory.getBean(AbstractBeanFactory.java:164)
     at org.springframework.beans.factory.support.DefaultListableBeanFactory.preInstantiateSingletons(DefaultListableBeanFactory.java:429)
     at org.springframework.context.support.AbstractApplicationContext.finishBeanFactoryInitialization(AbstractApplicationContext.java:729)
     at org.springframework.context.support.AbstractApplicationContext.refresh(AbstractApplicationContext.java:381)
     at org.springframework.context.support.ClassPathXmlApplicationContext.<init>(ClassPathXmlApplicationContext.java:139)
     at org.springframework.context.support.ClassPathXmlApplicationContext.<init>(ClassPathXmlApplicationContext.java:93)
     at com.fatwire.wem.sso.DynamicInjector.<init>(DynamicInjector.java:52)
     at com.fatwire.wem.sso.DynamicInjector.instance(DynamicInjector.java:232)
     at com.fatwire.wem.sso.SSOFilter.init(SSOFilter.java:65)
     at org.apache.catalina.core.ApplicationFilterConfig.getFilter(ApplicationFilterConfig.java:295)
     at org.apache.catalina.core.ApplicationFilterConfig.setFilterDef(ApplicationFilterConfig.java:422)
     at org.apache.catalina.core.ApplicationFilterConfig.<init>(ApplicationFilterConfig.java:115)
     at org.apache.catalina.core.StandardContext.filterStart(StandardContext.java:4072)
     at org.apache.catalina.core.StandardContext.start(StandardContext.java:4726)
     at org.apache.catalina.startup.HostConfig.checkResources(HostConfig.java:1284)
     at org.apache.catalina.startup.HostConfig.check(HostConfig.java:1382)
     at org.apache.catalina.startup.HostConfig.lifecycleEvent(HostConfig.java:306)
     at org.apache.catalina.util.LifecycleSupport.fireLifecycleEvent(LifecycleSupport.java:142)
     at org.apache.catalina.core.ContainerBase.backgroundProcess(ContainerBase.java:1389)
     at org.apache.catalina.core.ContainerBase$ContainerBackgroundProcessor.processChildren(ContainerBase.java:1653)
     at org.apache.catalina.core.ContainerBase$ContainerBackgroundProcessor.processChildren(ContainerBase.java:1662)
     at org.apache.catalina.core.ContainerBase$ContainerBackgroundProcessor.run(ContainerBase.java:1642)
     at java.lang.Thread.run(Thread.java:662)
Caused by: java.lang.ExceptionInInitializerError
     at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
     at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)
     at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
     at java.lang.reflect.Constructor.newInstance(Constructor.java:513)
     at org.springframework.beans.BeanUtils.instantiateClass(BeanUtils.java:100)
     at org.springframework.beans.factory.support.SimpleInstantiationStrategy.instantiate(SimpleInstantiationStrategy.java:61)
     at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.instantiateBean(AbstractAutowireCapableBeanFactory.java:877)
     ... 32 more
Caused by: net.sf.ehcache.CacheException: error setting options
     at net.sf.ehcache.distribution.MulticastRMICacheManagerPeerProvider.init(MulticastRMICacheManagerPeerProvider.java:99)
     at net.sf.ehcache.CacheManager.init(CacheManager.java:306)
     at net.sf.ehcache.CacheManager.<init>(CacheManager.java:234)
     at com.fatwire.cache.ehcache.EhCacheObjectCache._initCache(EhCacheObjectCache.java:704)
     at com.fatwire.cache.ehcache.EhCacheObjectCache.start(EhCacheObjectCache.java:538)
     at com.fatwire.wem.sso.cas.cache.SessionMappingStorage.<init>(SessionMappingStorage.java:47)
     at com.fatwire.wem.sso.cas.listener.CASListener.<clinit>(CASListener.java:15)
c) In cms.log i got below exception
2012-07-28 11:49:59,500 ERROR [org.springframework.web.context.ContextLoader] - Context initialization failed
org.springframework.beans.factory.BeanDefinitionStoreException: Could not resolve bean definition resource pattern [WEB-INF/spring-configuration/*.xml]; nested exception is java.io.FileNotFoundException: ServletContext resource [WEB-INF/spring-configuration/] cannot be resolved to URL because it does not exist
     at org.springframework.beans.factory.support.AbstractBeanDefinitionReader.loadBeanDefinitions(AbstractBeanDefinitionReader.java:190)
     at org.springframework.beans.factory.support.AbstractBeanDefinitionReader.loadBeanDefinitions(AbstractBeanDefinitionReader.java:149)
     at org.springframework.web.context.support.XmlWebApplicationContext.loadBeanDefinitions(XmlWebApplicationContext.java:124)
     at org.springframework.web.context.support.XmlWebApplicationContext.loadBeanDefinitions(XmlWebApplicationContext.java:92)
     at org.springframework.context.support.AbstractRefreshableApplicationContext.refreshBeanFactory(AbstractRefreshableApplicationContext.java:123)
     at org.springframework.context.support.AbstractApplicationContext.obtainFreshBeanFactory(AbstractApplicationContext.java:422)
     at org.springframework.context.support.AbstractApplicationContext.refresh(AbstractApplicationContext.java:352)
     at org.springframework.web.context.ContextLoader.createWebApplicationContext(ContextLoader.java:255)
     at org.springframework.web.context.ContextLoader.initWebApplicationContext(ContextLoader.java:199)
     at org.springframework.web.context.ContextLoaderListener.contextInitialized(ContextLoaderListener.java:45)
     at org.jasig.cas.web.init.SafeContextLoaderListener.contextInitialized(SafeContextLoaderListener.java:62)
     at org.apache.catalina.core.StandardContext.listenerStart(StandardContext.java:4206)
     at org.apache.catalina.core.StandardContext.start(StandardContext.java:4705)
     at org.apache.catalina.startup.HostConfig.checkResources(HostConfig.java:1284)
     at org.apache.catalina.startup.HostConfig.check(HostConfig.java:1382)
     at org.apache.catalina.startup.HostConfig.lifecycleEvent(HostConfig.java:306)
     at org.apache.catalina.util.LifecycleSupport.fireLifecycleEvent(LifecycleSupport.java:142)
     at org.apache.catalina.core.ContainerBase.backgroundProcess(ContainerBase.java:1389)
     at org.apache.catalina.core.ContainerBase$ContainerBackgroundProcessor.processChildren(ContainerBase.java:1653)
     at org.apache.catalina.core.ContainerBase$ContainerBackgroundProcessor.processChildren(ContainerBase.java:1662)
     at org.apache.catalina.core.ContainerBase$ContainerBackgroundProcessor.run(ContainerBase.java:1642)
     at java.lang.Thread.run(Thread.java:662)
Caused by: java.io.FileNotFoundException: ServletContext resource [WEB-INF/spring-configuration/] cannot be resolved to URL because it does not exist
     at org.springframework.web.context.support.ServletContextResource.getURL(ServletContextResource.java:130)
     at org.springframework.core.io.support.PathMatchingResourcePatternResolver.isJarResource(PathMatchingResourcePatternResolver.java:406)
     at org.springframework.core.io.support.PathMatchingResourcePatternResolver.findPathMatchingResources(PathMatchingResourcePatternResolver.java:338)
     at org.springframework.core.io.support.PathMatchingResourcePatternResolver.getResources(PathMatchingResourcePatternResolver.java:276)
     at org.springframework.context.support.AbstractApplicationContext.getResources(AbstractApplicationContext.java:1018)
     at org.springframework.beans.factory.support.AbstractBeanDefinitionReader.loadBeanDefinitions(AbstractBeanDefinitionReader.java:177)
     ... 21 more
2012-07-28 11:49:59,515 FATAL [org.jasig.cas.web.init.SafeContextLoaderListener] - SafeContextLoaderListener:
The Spring ContextLoaderListener we wrap threw on contextInitialized.
But for our having caught this error, the web application context would not have initialized.
org.springframework.beans.factory.BeanDefinitionStoreException: Could not resolve bean definition resource pattern [WEB-INF/spring-configuration/*.xml]; nested exception is java.io.FileNotFoundException: ServletContext resource [WEB-INF/spring-configuration/] cannot be resolved to URL because it does not exist
     at org.springframework.beans.factory.support.AbstractBeanDefinitionReader.loadBeanDefinitions(AbstractBeanDefinitionReader.java:190)
     at org.springframework.beans.factory.support.AbstractBeanDefinitionReader.loadBeanDefinitions(AbstractBeanDefinitionReader.java:149)
     at org.springframework.web.context.support.XmlWebApplicationContext.loadBeanDefinitions(XmlWebApplicationContext.java:124)
     at org.springframework.web.context.support.XmlWebApplicationContext.loadBeanDefinitions(XmlWebApplicationContext.java:92)
     at org.springframework.context.support.AbstractRefreshableApplicationContext.refreshBeanFactory(AbstractRefreshableApplicationContext.java:123)
     at org.springframework.context.support.AbstractApplicationContext.obtainFreshBeanFactory(AbstractApplicationContext.java:422)
     at org.springframework.context.support.AbstractApplicationContext.refresh(AbstractApplicationContext.java:352)
     at org.springframework.web.context.ContextLoader.createWebApplicationContext(ContextLoader.java:255)
     at org.springframework.web.context.ContextLoader.initWebApplicationContext(ContextLoader.java:199)
     at org.springframework.web.context.ContextLoaderListener.contextInitialized(ContextLoaderListener.java:45)
     at org.jasig.cas.web.init.SafeContextLoaderListener.contextInitialized(SafeContextLoaderListener.java:62)
     at org.apache.catalina.core.StandardContext.listenerStart(StandardContext.java:4206)
     at org.apache.catalina.core.StandardContext.start(StandardContext.java:4705)
     at org.apache.catalina.startup.HostConfig.checkResources(HostConfig.java:1284)
     at org.apache.catalina.startup.HostConfig.check(HostConfig.java:1382)
     at org.apache.catalina.startup.HostConfig.lifecycleEvent(HostConfig.java:306)
     at org.apache.catalina.util.LifecycleSupport.fireLifecycleEvent(LifecycleSupport.java:142)
     at org.apache.catalina.core.ContainerBase.backgroundProcess(ContainerBase.java:1389)
     at org.apache.catalina.core.ContainerBase$ContainerBackgroundProcessor.processChildren(ContainerBase.java:1653)
     at org.apache.catalina.core.ContainerBase$ContainerBackgroundProcessor.processChildren(ContainerBase.java:1662)
     at org.apache.catalina.core.ContainerBase$ContainerBackgroundProcessor.run(ContainerBase.java:1642)
     at java.lang.Thread.run(Thread.java:662)
Caused by: java.io.FileNotFoundException: ServletContext resource [WEB-INF/spring-configuration/] cannot be resolved to URL because it does not exist
     at org.springframework.web.context.support.ServletContextResource.getURL(ServletContextResource.java:130)
     at org.springframework.core.io.support.PathMatchingResourcePatternResolver.isJarResource(PathMatchingResourcePatternResolver.java:406)
     at org.springframework.core.io.support.PathMatchingResourcePatternResolver.findPathMatchingResources(PathMatchingResourcePatternResolver.java:338)
     at org.springframework.core.io.support.PathMatchingResourcePatternResolver.getResources(PathMatchingResourcePatternResolver.java:276)
     at org.springframework.context.support.AbstractApplicationContext.getResources(AbstractApplicationContext.java:1018)
     at org.springframework.beans.factory.support.AbstractBeanDefinitionReader.loadBeanDefinitions(AbstractBeanDefinitionReader.java:177)
     ... 21 more
Let me know what else i missed here.
regards
Sri

Problem with Oracle Client(64 bit) install on Windows 7

Hi,
I am trying to install Oracle Client 64 bit (win64_11gR2_client) on my laptop and its giving me all the pre requisite failed for "Physical Memory, Free Space, Architecture and Enviornment variable: Path". So i need to exit that setup.
I have enough space almost 130 GB free on my laptop. Also, i cleared temp data. Then increased physical memory to 4096 MB but still facing the same error and not able to install the Oracle Client on my laptop.
Please assist as soon as possible.
-Parth

Pl identify exact version of Win 7 - you will need Professional version or higher - Home versions are not supported. Pl verify you meet all of the pre-reqs for the install as identified in the Install Guide - http://download.oracle.com/docs/cd/E11882_01/install.112/e16774/pre_install.htm
HTH
Srini

Mandrake 8.0 & Oracle 8.1.7 install - seems OK

After much pains I seemed to have been able to install Oracle 8.1.7 and create a database. Have not tested anything else.
1- I have a fresh install of Mandrake 8.0
2- I follow instruction at http://www.linux-mandrake.com/en/updates/2001/MDKA-2001-006.php3?dis=8.0 to update the glibc libraries. I use the MandrakeUpdate tools. This takes time to download even though I have fast cable modem
3- Now after the glibc update, runInstaller will work
4- Do not choose to create a database! Just install the software from Oracle
5- Down load the Oracle patch glibc-2.1.3-stubs.tar.gz from the same page where you get the RDBMS software
6- Unpack this at the Oracle HOME directory
7- Run the file ./setup_stubs.sh to patch Oracle executables
Now, you can run dbassist and create a database. Svrmgrl will now work and help to create a database.
I notice that the JRE software is unstable. DBASSIST crashed on me a couple of times and froze the X window environment.
It should be Ok to grab a set of files for a sample oracle database files (init.ora and use svrmgrl to create the database by hand.
Good luck! It's a pain on the neck as Linux and Oracle are like changing winds
Dao Mai

I'm new in Linux, but I follow all your steps and for nothing, because 'runInstaller' not start!!!
I receive that message:
'[oracle@servman linux]$ ./runInstaller
The Java RunTime Environment was not found at []/bin/jre. Hence, the Oracle Universal Installer cannot be run.
Please visit http://www.javasoft.com and install JRE version 1.1.8 or higher and try again.
: No such file or directory'
What can I do, because I have installed jre-1.3.1?
Thanks!
<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by Dao Mai ([email protected]):
After much pains I seemed to have been able to install Oracle 8.1.7 and create a database. Have not tested anything else.
1- I have a fresh install of Mandrake 8.0
2- I follow instruction at http://www.linux-mandrake.com/en/updates/2001/MDKA-2001-006.php3?dis=8.0 to update the glibc libraries. I use the MandrakeUpdate tools. This takes time to download even though I have fast cable modem
3- Now after the glibc update, runInstaller will work
4- Do not choose to create a database! Just install the software from Oracle
5- Down load the Oracle patch glibc-2.1.3-stubs.tar.gz from the same page where you get the RDBMS software
6- Unpack this at the Oracle HOME directory
7- Run the file ./setup_stubs.sh to patch Oracle executables
Now, you can run dbassist and create a database. Svrmgrl will now work and help to create a database.
I notice that the JRE software is unstable. DBASSIST crashed on me a couple of times and froze the X window environment.
It should be Ok to grab a set of files for a sample oracle database files (init.ora and use svrmgrl to create the database by hand.
Good luck! It's a pain on the neck as Linux and Oracle are like changing winds
Dao Mai<HR></BLOCKQUOTE>
null

Not able to install eBusiness Linux 32 bit version 12.0.4

I am not able to install Oracle Ebusiness linux version in my desktop. I get this error during step 2 and it stops.
Exception in thread "Thread-254" : java.lang.NoClassDefFoundError : oracle/apps/ad/util/MessageHandler
at oracle.apps.ad.rapidwiz.util.AutoConfigRunner.runDriver(AutoConfigRunner.java:231)
at oracle.apps.ad.rapidwiz.util.AutoConfigRunner.run(AutoConfigRunner.java:209)
How can I fix this issue ? Looks like the java class missing.

Thanks for you information.
I have installed all the pre-requiste softwares and packages as per this link
www.oracle-base.com/articles/apps/OracleApps_12_InstallationOnOEL45.php.
installdbf.log --> exited with 0
ApplyDatabase_05130109.log --> ApplyDatabase Completed Successfully.
adconfig.log --> AutoConfig is exiting with status 0
NetServiceHandler.log --> adgentns.pl exiting with status 0
I see the following error message at the end of this log file appsutil/log/$CONTEXT_NAME/MMDDHHMM.log.
FINISHED INSTALL PHASE : DATABASE : Tue May 13 01:57:39 EDT 2008
/training/trn/oracle/TRN1/db/tech_st/10.2.0/temp/TRN1_varsha/adrundb.sh has succeeded
java.lang.NoClassDefFoundError: oracle/apps/ad/tools/configuration/NetServiceHandler
Please refer to the remaining logs on applications node at - /training/trn/oracle/TRN1/inst/apps/TRN1_varsha/logs/05130035.log
I have installed OEL4 and made the requiredchanges
Does this mean you have already installed all
pre-req. software/packages?
It completed step 1 100% and during step 2 around66%
Please review the following log files for further
details about the error:
<RDBMS
ORACLE_HOME>/appsutil/log/$CONTEXT_NAME/installdbf.log
<RDBMS
ORACLE_HOME>/appsutil/log/$CONTEXT_NAME/adcrdb_<SID>.l
og
<RDBMS
ORACLE_HOME>/appsutil/log$CONTEXT_NAME/ApplyDatabase_<
MMDDHHMM>.log
<RDBMS
ORACLE_HOME>/appsutil/log/$CONTEXT_NAME/<MMDDHHMM>/adc
onfig.log
<RDBMS
ORACLE_HOME>/appsutil/log/$CONTEXT_NAME/<MMDDHHMM>/Net
ServiceHandler.log

Is oracle 9i able to install in XP Professional

Similar Messages

Maybe you are looking for