IS-Retail Competetor Pricing and Pricing Rules

Hello ,
Can any one give more insight in to Competetor pricing. It is delfined in IMG - Logistics-general - Retail Pricing - Competitive pricing .
Also It is defined in article master MM42 under sales tab. I would like to know how the process flow works and also how pricing rules is defined in relation with competitive pricing.
Thanks in Advance
Karthik

Hi,
You can use single-step or two-step sales price calculation, depending on whether a single-step or two-step logistics process used in your system.
Single-step: Single-step price calculation is performed when a store procures articles directly from a vendor, that is, if there is no upstream organizational unit assigned to the store. Calculating sales prices for the stores is based on the purchase price for external vendors. For example, DSP products... I mean Daily Supplied Products like Milk, Curds, Bakery Products so on.
*Two-step" : Two-step calculating sales prices for the stores is based on the transfer price for distribution centers.
http://help.sap.com/erp2005_ehp_04/helpdata/en/12/085147470311d1894a0000e8323352/content.htm
Bye,
Muralidhara

Similar Messages

Questions about CIN tax procedure choice and pricing schemas

Hi all,
I have to implement SAP on a Indian company and I'm verifying all particularity about this country (in particular tax procedures and the great number of differents tax conditions used).
I have two questions about tax procedures and pricing schemas. Every feedback about thse points will be appreciated.
a) To choose tax procedure TAXINN or TAXINJ which are the elements that I have to consider?
I have read lot of documentation about CIN implementation and Iu2019m oriented to choose TAXINN schema, but If possible I would to understand better which are on behalf of one choice or another.
b) To define pricing schemas for India, after check with local users and using examples of documents (in particular tax invoice) actually produced, I have understood that taxes have to be applied on amount defined starting from price list, minus discounts recognized to customer plus surcharges eventually to bill (packing, transport, etc.).
Itu2019s correct for any type of taxes that tax amount is calculated on u201Cnet valueu201D defined at item level or there are exceptions to this rule?
Thanks in advance
Gianpaolo

hi,
this is to inform you that,
a) About point 1 I know the difference between the 2 tax procedures (conditions or formulas). I also have read in others post in the FORUM that TAXINN is preferable. So I would to understand which are the advantages to choose instead TAXINJ. There are particular reasons or it'a only an alternative customizing setting?
a.a. for give for posting the link : plese give me the advantages of TAXINJ and TAXINN
CIN - TAXINN and TAXINJ
b) About point 2, to define which value has to be used as base amount to calculate taxes isn't a choice, but is defined depending by fiscal requirement of the country, in this case India fiscal requirement. I know that, as Lakshmipathi
write as answer on my question, exception could be, but it was important for me to understand if I have understood correctly the sequence of the pricing condition in the schema in "normal" situation.
b.b. you can create your own pricing procedure for this and go ahead.
hope this clears your issue.
balajia

New VMS/IPC boxes - speed and pricing

For the most part, I've been a very happy FiOS customer. The internet side has gone out exactly once in the year I've had the service, and it was restored within an hour. TV has dropped out twice, both times very late at night (I assume for head-end maintenance). Reliability is better than every other ISP I've ever had, combined.
That said..
I wanted to snag another STB for the house - found out the local stores had all been closed (I can understand why from the financial aspect, but it was still a shock pulling up to my old store to pick up another STB.. and finding a "for lease" sign, when I'd been by there 2 months prior), so I looked at options online. The new VMS + IPC boxes looked promising, especially since they added the ability for the entire house to pause, rewind, schedule recordings, etc, from any TV - instead of only the DVR being able to do that (though the old boxes could stream recordings from the DVR).
My chief complaint so far - while the VMS box itself is responsive, the IPC boxes are painfully slow to respond to anything. Picture quality is fantastic, but using them feels, to put it in nerd terms, like using a Pentium 90 with Windows XP and 128MB RAM. They take 5+ to respond to anything more than a channel change (and even that takes up to 3 seconds), and frequently "lose" remote key presses if you try to, say, hit guide, hit page down, then try to arrow down to the channel that you know is on the next page. It literally feels like a throwback to the earliest digital set top boxes from Comcast/Time Warner - the first ones with built-in TV listings in the mid 1990s. The speed is right on par with them; the only thing faster right now is they don't shut down for 30 minutes a day to update the TV listings.
I've gone through the built-in diagnostics on the boxes to verify signal levels - they're decent (not perfect, but this is a 20 year old house with mostly original coax), but we have no pixelation or picture drop-out, so I would think they could carry the basic stuff between the IPC boxes and VMS pretty easily. The router certainly has no problem handling the 75/35 on the same coax (speedtest shows 85-90 down, 35-40 up, with a ~5ms ping, no matter which cable outlet it's plugged into)..
My other complaint - why did Verizon move to "rooms" for pricing? I thought I was getting a DVR plus 3 STBs (since I ordered 3 STBs and asked for a DVR), instead of a VMS + 2 STBs - and I'm paying much more than I did for the old DVR + 2 STBs.
With the griping out of the way - is there a reasonable chance that firmware updates will help with the speed of the IPC boxes? Or is there a chance it's a cabling issue? (I have no problem pulling new coax or cat5e, and I can provide signal levels if that'll help) If not, is there any chance of getting the old QIP7232 DVR + QIP7100 box back (and adding another 7100), and switching back to what I was paying before? I know they're a bit antiquated (especially the 7100s), but they were much more responsive, and didn't make me want to throw the STBs through the window. It just seems really rediculous that I'm paying such a large premium (plus the "upgrade fee") for equipment that, in terms of the user experience, is much worse.
Again.. been a happy customer for a long time, but the new terminals are super painful to use.
Thanks.

If this is the case. I think I will wait till the bugs are worked out
Question what were you paying before and after for the boxes. So what was the old DVR + 2 STB's and the new DVR plus 2 stb's
Trying to get an idea of what you meant by way more. Most people said same pricing and a small $20 or so upgrade fee

Price and Pricing conditions are not copied to PO for a line item !!

Hi
I have created a PO w.r.t a PR which has only one line item.
Now, I add another line item to this existing PO, i get an error message that the Price and Pricing conditions are not copied.
How do i rectify this error !!
Where might be the link for this Price and Pricing conditions to get copied in to this PO ??
MaruthiRam

What kind of PR and in the PO same material you enter for new line or new material and do you have any funcitonal authorization assigned o your user id
please reply

Document/customer pricing and replication of pricing data from r/3 to crm

Hi,
can any one tel me how can we replicate the r/3 pricing condition, pricing procedure to crm.
once it is replicated to crm what customization is require in crm.
tel me abt customer and document pricing procedure, how it will be effected in the transactions.
plz any one help me to know this scenarios.
thanks
kumar

Hello Sathish,
Start from here: [Data Transfer from SAP ECC (Download)|http://help.sap.com/saphelp_crm60/helpdata/en/51/62431b7b3511d3ad650000e8a5bd28/content.htm] The help document gives you the steps required. You can also see the [Master Guide |https://service.sap.com/~sapdownload/011000358700001398312008E/MG_CRM2007V2.pdf]or [Customizing Replication Guide|http://help.sap.com/bp_crmv250/CRM_DE/BBLibrary/Documentation/B09_BB_ConfigGuide_EN_US.doc] for similar configuration information.
Essentially after you download the pricing related customizing data from ECC into CRM, you have to download the conditions. the standard conditions get downloaded without any issues since the download adapters are defined already. However, for downloading custom conditions in ECC, you have to do further configuration. You have to define the adapter objects and do the initial download of those conditions. Such an information is available in the [Master data and Transaction data Replication Guide|http://help.sap.com/bp_crmv250/CRM_DE/BBLibrary/Documentation/C03_BB_ConfigGuide_EN_US.doc].
Easwar Ram
http://www.parxlns.com

CRM 5.0 and Pricing

Hello Guys ,
I am creating a sales order in CRM and I am using CRM as standalone system.
I wanna test Pricing in CRM and I cant not. I maintained all necesary steps... maintained pricing determination and Created condit records.
VMC has been actived from SM52 ( Debugging switched off).
Product has required sales area assigned.
But I dont know why still my product wil not have price..
Please help me ... Thanks and regards,
Dinesh.

Dear Dinesh,
I believe you missed the following step:
Determine Pricing Procedures:
SAP Implementation Guide→Customer Relationship Management→Basic Functions→Pricing→Pricing in the Business Transaction -> Determine Pricing Procedure
Where you need mention the Sales Org, Dist Channel, Div, Cust pric. procedure and doc pric procedure and the pricing procedure that will be determined based on those criteria.
Pls let me know if that solves your problem.
Thanks,
Atin
Reward points, if it helps.

Material exchane ,copy pricing and conditions from main item to sub item.

Hi All,
We are using parts exchange/interchangeability in the transaction ME22N,
While using ME22N we are exchanging main item with interchangeable part and while doing so we want to copy pricing and conditions from main item to sub item.
But its not happening.
As per sap help its possible, details describe below.
http://help.sap.com/erp2005_ehp_04/helpdata/en/c2/0a5288b77d11d3bcce00105ab03aee/content.htm
Price Determination by Copying from Main Item
In the case of price determination by copying from the main item, the net price of the originally ordered part is still used for the superseding part in a part exchange.
The system copies all conditions from the main item to all sub-items and takes into account the order quantity for the main item when calculating scale prices. It does not take into account the conditions and scale prices that exist for the interchangeable part.
You cannot change the conditions, which have been copied from the main item, at sub-item level. It is possible, however, to define additional conditions for each sub-item.
Prerequisites
A calculation schema, which can be altered on an individual basis in Customizing, has been supplied for the price determination.
In the vendor master record, you have set the schema group 09 (interchangeable material).
But in customizing I didnu2019t find value 09 for schema group .
Can any buddy through some light on missing pieces which need to be set?
Thanks
Regards
Ritesh

Hi,
Can you check few more things and tell me?
- In this exit, does XVBPA and XVBAP contains all the line items. ( main and sub items ).
- In Sales order creation time, do these table have VBELN populated when this exit triggers.
- If you modify XVBPA or XVBAP in this exit, do they get overwritten after that.
Try this code. See if it works. Let me know if you still have a problem.
DATA: wa_hvbpa LIKE vbpa,
 wa_xvbpa like vbpa.
CLEAR: wa_hvbpa, wa_xvbpa.
* check if HVBAP and VBAP line items are not same
IF vbap-posnr <> hvbap-posnr.
* read the ****-to partner from main-item
READ TABLE xvbpa INTO wa_hvbpa WITH KEY posnr = hvbap-posnr
 parvw = 'WE'.
IF sy-subrc = 0.
* read the line item data for sub-item based on main item
 READ TABLE xvbap WITH KEY posnr = vbap-posnr
 uepos = hvbap-posnr.
* See if current line is the child of that BoM parent
 IF sy-subrc = 0.
 MOVE wa_xvbpa-kunnr TO xvbpa-kunnr.
 MOVE xvbap-vbeln TO wa_xvbpa-vbeln.
 MOVE xvbap-posnr TO wa_xvbpa-posnr.
 MOVE 'WE' TO wa_xvbpa-parvw.
 MODIFY vbpa FROM wa_xvbpa.
 ENDIF.
ENDIF.
ENDIF.
Regards,
RS

Scale in pricing and free goods.

Hi All,
Can anyone plz tell me ,What is the role and how to use the scale in pricing and free goods determination.
Regards,
Ashima

hi,
. Create a condition by copying a a standard condition like BO03 in V/06
2. Assign this condition in the std pricing procedure with acct key as ERB and accural key as ERU - V/08
3.Create a Rebate Agreement in VBO1 (It is O = Owl and not zero). No will be generated
choose 003 - Customer rebates, enter the customer code, the validity and check for the status shld be in Open, click on the conditions enter the percentage and accrual amount. You also can have scales in this. Also you need to maintain the material for the settlement
4. Create a sales order for that customer and check the rebate agreement.
5. You can see the rebate condition in the invoice only.
6. Once you have posted the invoices, then go to rebate agrrement no. clicl on verfication and it will show the order details.
7. For settlement change the status of the rebate to B - release for the settlement.
8. Credit memo request will b generated copy the no. and go to VA02, remove the blocks if any and create an invoice (credit memo).this will show u the accrual amount.
9. In both the invoice and the credit memo check the posting - accounting document it will show u the accrual as negative.
10. Again go to rebate aggreement and check the status it will show you D - Final settlement of agreement already carried out
Regards,,
JP

One question about Pricing and Conditions puzzle me for a long time!

One question about Pricing and Conditions puzzle me for a long time.I take one example to explain my question:
1-First,my sale order use pricing procedure RVAA01.
2-Next,the pricing procedure RVAA01 have some condition type,such as EK01(Actual Costs),PR00(Price)....,and so on.
3-Next,the condition type PR00 define the Access Sequences PR00 as it's Access Sequences.
4-Next,the Access Sequences PR00 have some Condition tables,such as:
     table 118 : "Empties" Prices (Material-Dependent)
     table 5 : Customer/Material
     table 6 : Price List Type/Currency/Material
     table 4 : Material
5-Next,I need to maintain Condition tables's Records.Such as the table 5(Customer/Material).I guess the sap would supply one screen for me to input the data of table 5.At this screen,the sap would ask me to select one table,such as table 5.When I select the table 5,the sap would go to the screen to let me input the data of table 5.But when I use the T-CODE VK31 or VK32 to maintain Condition tables's Record,I found it's total different from my guess:
A-First,I can not found one place for me to open the table,such as table 5,to let me input the data?
B-Second,For example,when I select the VK31->Discounts/Surcharges->By Customer/Material,the sap show the grid view at the right side.At the each line of the grid view,you need to select the Condition Type at the first field.And this make me confused very much.Why the sap need me to select one Condition Type but not the Condition table?To the normal logic,it ought not to select Condition table but not the Condition Type!
Dear all,I'm a new one in sd.May be this is a very stupid question.But it did puzzle me for a long time.If any one can explain this question in detail and let me understand the concept,I will appreciate him/her very much.Thank you.

Hi,
You said that you are using the T.codes VK31 or VK32.
These transaction codes are used to enter condition records for standard condition types. As you can see a grid left side having all the standard condition types like price, discounts, taxes, frieghts.
Pl check using T.code VK11 OR VK12 (change mode)
Here you can enter the required condition type, in the intial screen. (like PR00, MWST, K004, K005 .....etc)
After giving the condition type, press enter or click on Combinations icon on top of the screen. Then you can see all the condition tables which you maintained for that condition type. Like as you said table 118, table 5, table 6 and table 4.
You can select any table and press enter, then you can go into the screen in which you have all the field cataglogues you maintained for that table. For example you selected combination of Customer/Material (table 5) then after you press enter then you can see customer field on top, and material fields.
You can give all the required values and save the conditon record.
Hope this is clear.
REWARD IF HELPFUL.
Regards,
praveen

What are the new pricing and fees for Cs6?

What will I be forced to pay to keep upgrading my Master Collection to the next version (Cs 6)? Can I still purchase Dvd's and install the software on my own computer or will I be forced to move to the non-safe cloud? Where my hardwork can be hacked and stolen! The cloud is worthless to many of us wishing to keep control over copyright and useage rights.I am guessing more people want to keep it the way it is and not shift control over to a hackable cloud. Nothing on the web is safe, so why shift everything over to the cloud and force many of your long time customers to pay monthly fees or the software locks us out. For over 25 years I have bought and paided for Adobe software, where is my monthly kickback for using your software? If this is the wave of the future I guess i have bought my last upgrade!

I think you misunderstand the cloud.
Nobody is going to force you to store your files there. It’s a part of the service that you can use or not use at your own discretion.
As for pricing, if you’re on CS5 or CS5.5 you will be able to buy an upgrade at reduced pricing and continue that route. If you’re on CS4 or earlier you’ll have three choices.
1.       Pay full price for CS5
2.       Move to Creative Cloud for whatever the subscription price is
3.       Stay with what you have.
Hope that helps,
Bob

Info needed on how to get list price for a given MATNR and pricing Conditio

Hi All,
Can some one help me in finding List price for a given MATNR and pricing condition type.
Basically, i need info regarding the tables that i need to use for this purpose.
Thanks in advance.
Regards,
Udaya.
PS: All helpful answers will be rewarded.

Hi Udaya,
A simple solution to all these kind of problems:
Goto Transation SE16
Table :TSTC
in Tcode :Give A* or V* or anything...and find the relevant transctions and data.
if found useful...reward points.
Regards,
Nisha

Info needed on how to get list price for a given MATNR and pricing Conditi

Hi All,
Can some one help me in finding List price for a given MATNR and pricing condition type.
Basically, i need info regarding the tables that i need to use for this purpose.
Thanks in advance.
Regards,
Udaya.
PS: All helpful answers will be rewarded.

Hi,
I moved your topic to this forum
Mario

Interview Questions and Answers for Pricing and Shipping Modules!!!!

Please let me know the Interview Questions and Answers for Pricing and Shipping Modules?

http://www.google.co.in/#hl=en&tbo=d&sclient=psy-ab&q=interview+questions+in+oracle+pricing+and+shipping&oq=interview+questions+in+oracle+pricing+and+shipping&gs_l=hp.3..33i21.1169.38878.0.39096.61.45.10.6.6.4.4004.21813.2-21j9j6j3j2j1j1j1.44.0.les%3B..0.0...1c.1.jEq3EQIj8vA&pbx=1&bav=on.2,or.r_gc.r_pw.r_qf.&bvm=bv.1357700187,d.bmk&fp=cedcde5e8e6bc792&biw=1280&bih=619
HTH
Mahendra

Link b/w credit horizon period and pricing proceadure

Hi Gurus
what is the link between credit horizon period and pricing proceadure.

Hi there,
Also check in OVA8 what is the horizion in Dynamic credit check for your credit control area.
Could be that the system is defaulting the horizion from there.
But as per standard, for your case system willnot check the orders that are due for delivery after 2 months. It will consider the orders that are due for delivery only within the 2 months of the order date.
So check the delivery due date is within the 2 months period or after the 2 months.
Regards,
Sivanand

Tax and pricing info are not flowing into Idoc orders02-eledp04 and 05

Hi,
We are carrying out SRM5.5 -SUS and ECC6.0 Integration using PI 7.
We are configuring for the MM-SUS Scenario.
Now,to accomodate the Tax / Pricing we have installed the add on
component LOCINSUS and we are having doubts on how to use it:
1) Tax and pricing information are not flowing into IDOC- orders02
(e1edp04 and e1edp05 segments are not present in the created IDOC). The
condition print indicator in checked on ECC System and we have also
implemented SAP note 995986.
2)In create ASN transaction , we are not able to see the Excise Invoice
Number and Date field in Basic data tab as expected from SAP Library
document although we have installed the Localization Add on component.
Please help us to reso1ve these issues,
Regards,
Mani
099890-22217.

Mani,
Did you resolve this issue, because we are having the same issue in ECC6 with IDoc ORDERS02.
If you did resolve this issue could you please let us know how, much appreciated.
Bill.

IS-Retail Competetor Pricing and Pricing Rules

Similar Messages

Maybe you are looking for