Is server or service reboot required after editing registry in 13568 event

Is server or service reboot required after editing registry in 13568 event .

Hi Below is the event log guiding me to edit registry in order to resolve replication issue, In this case i cant restart the server or even service.I just want to know will this registry edit take effect with out reboot server or service.
Event Type: Error
Event Source: NtFrs
Event Category: None
Event ID: 13568
Description:
The File Replication Service has detected that the replica set "DOMAIN SYSTEM VOLUME (SYSVOL SHARE)" is in JRNL_WRAP_ERROR.
 Replica set name is    : "DOMAIN SYSTEM VOLUME (SYSVOL SHARE)"
 Replica root path is   : "c:\windows\sysvol\domain"
 Replica root volume is : "\\.\C:"
 A Replica set hits JRNL_WRAP_ERROR when the record that it is trying to read from the NTFS USN journal is not found.  This can occur because of one of the following reasons.
 [1] Volume "\\.\C:" has been formatted.
 [2] The NTFS USN journal on volume "\\.\C:" has been deleted.
 [3] The NTFS USN journal on volume "\\.\C:" has been truncated. Chkdsk can truncate the journal if it finds corrupt entries at the end of the journal.
 [4] File Replication Service was not running on this computer for a long time.
 [5] File Replication Service could not keep up with the rate of Disk IO activity on "\\.\C:".
 Setting the "Enable Journal Wrap Automatic Restore" registry parameter to 1 will cause the following recovery steps to be taken to automatically recover from this error state.
 [1] At the first poll, which will occur in 5 minutes, this computer will be deleted from the replica set. If you do not want to wait 5 minutes, then run "net stop ntfrs" followed by "net start ntfrs" to restart the File Replication Service.
 [2] At the poll following the deletion this computer will be re-added to the replica set. The re-addition will trigger a full tree sync for the replica set.
WARNING: During the recovery process data in the replica tree may be unavailable. You should reset the registry parameter described above to 0 to prevent automatic recovery from making the data unexpectedly unavailable if this error condition occurs again.
To change this registry parameter, run regedit.
Click on Start, Run and type regedit.
Expand HKEY_LOCAL_MACHINE.
Click down the key path:
   "System\CurrentControlSet\Services\NtFrs\Parameters"
Double click on the value name
   "Enable Journal Wrap Automatic Restore"
and update the value.
If the value name is not present you may add it with the New->DWORD Value function under the Edit Menu item. Type the value name exactly as shown above.
For more information, see Help and Support Center at
http://go.microsoft.com/fwlink/events.asp.

Similar Messages

  • Is a Reboot Required after the new "Fix".

    The recent HH5 "fix" has downloaded again today, 9-00 am after previously being downloaded 25/02/2015, at 01-00 am.
    This suggests that the System does'nt know if the fix has been implemented.
    Just a naive question:-
    Is a reboot required, as would be usual for some Windows Updates, where the user is told "Restart now"?

    Slightly better news today. A TR069 event was logged this morning even while browsing through google. There was no interrupt.
    There was one DSL drop last night, apparently due to a failure to connect to remote admin.
    09:19:21, 27 Feb.
    (770200.680000) CWMP: session completed successfully
    09:19:20, 27 Feb.
    (770200.010000) CWMP: HTTP authentication success from https://pbthdm.bt.mo
    09:19:18, 27 Feb.
    (770197.710000) CWMP: Server URL: https://pbthdm.bt.mo; Connecting as user: ACS username
    09:19:18, 27 Feb.
    (770197.700000) CWMP: Session start now. Event code(s): '4 VALUE CHANGE'
    09:19:18, 27 Feb.
    (770197.360000) CWMP: Initializing transaction for event code 4 VALUE CHANGE
    01:11:03, 27 Feb.
    (740902.310000) CWMP: session completed successfully
    01:11:02, 27 Feb.
    (740901.660000) CWMP: HTTP authentication success from https://pbthdm.bt.mo
    01:10:59, 27 Feb.
    (740899.060000) CWMP: Server URL: https://pbthdm.bt.mo; Connecting as user: ACS username
    01:10:59, 27 Feb.
    (740899.050000) CWMP: Session start now. Event code(s): '2 PERIODIC,4 VALUE CHANGE'
    01:10:59, 27 Feb.
    (740898.720000) CWMP: Initializing transaction for event code 2 PERIODIC
    23:10:28, 26 Feb.
    (733667.780000) CWMP: session completed successfully
    23:10:28, 26 Feb.
    (733667.590000) CWMP: HTTP authentication success from https://pbthdm.bt.mo
    23:10:25, 26 Feb.
    (733664.830000) CWMP: Server URL: https://pbthdm.bt.mo; Connecting as user: ACS username
    23:10:25, 26 Feb.
    (733664.820000) CWMP: Session start now. Event code(s): '4 VALUE CHANGE'
    23:09:55, 26 Feb.
    (733634.490000) CWMP: session closed due to error: Timeout
    23:09:06, 26 Feb.
    (733585.780000) CWMP: Server URL: https://pbthdm.bt.mo; Connecting as user: ACS username
    23:09:06, 26 Feb.
    (733585.770000) CWMP: Session start now. Event code(s): '4 VALUE CHANGE'
    23:09:06, 26 Feb.
    (733585.430000) CWMP: Initializing transaction for event code 4 VALUE CHANGE
    Will wait before doing another reboot / factory reset. Last factory reset was 18-02-2015 and is shown in the logs as the last and only boot.

  • Timer Job job-application-server-admin-service spiking CPU after every minute

    Hi all,
    I have an issue in my SP2010 Farm that all the servers spiking CPU to 100% after a minute or so. I have drilled down and found that the following timer jon is the culprit.
    Timer Job job-application-server-admin-service. If I change the service running to 2 minutes (default is 1 Min) then the spikes comes after every 2 minutes.
    Please suggest what I can do about this?

    Was it working fine previously. If yes, what changes happened which caused this issue
    1. Check the ULS + Eventviewer logs at the time when this issue happens.
    2. Collect perflog files and execute PAL on that this will give you the complete analysis of processes and performance at that time.
    Check below:
    http://social.technet.microsoft.com/Forums/office/en-US/07207109-0450-47cf-b6ee-467a58eaa887/trust-relationship-between-the-primary-domain-and-trusted-domain-failed?forum=sharepointgenerallegacy
    http://webcache.googleusercontent.com/search?q=cache:nJYnqC6ug8cJ:sharepointfraggel.blogspot.com/+&cd=3&hl=en&ct=clnk&gl=in
    Fix the problem
    Manually clear the file system cache on the local servers (fe's) on which the timer service is running (http://support.microsoft.com/kb/939308)
    Stop the SharePoint Timer Service in Administrative Tool/Services.
    Go to the cache folder. For Windows Server 2008: Drive:\ProgramData\Microsoft\SharePoint\Config
    Find the folder that contains the file Cache.ini
    Delete all the XML configuration files in the folder so that you can verify that the folder is replaced by new XML files when the cache is rebuilt. 
    Open the Cache.ini file, delete all content in the file and type 1, save and exit. 
    Start the SharePoint Timer service 
    If this helped you resolve your issue, please mark it Answered

  • Reboot require after install the application from SCCM 2012 deployment

    Hi team,
    I have a application which is having 2 executable files. 
    1.exe and 2.exe , reboot is require after install every executable file. Please suggest me how can implement this.
    Once reboot done (1st executable file installed and reboot), SCCM should start 2nd executable file.

    No, because when the application will be installed it will evaluate the requirements of the deployment types in the order of the deployment type priority. The first deployment type that can install, based on its requirements, will be installed, after
    that the application will be considered installed and it won't process any other deployment types.
    My Blog: http://www.petervanderwoude.nl/
    Follow me on twitter: pvanderwoude

  • Daily manual reboot required after charging

    I have had my Droid Razor Maxx for 3 weeks. Since day I have to perform a daily reboot after left on charger overnight. The battery fully charges and I have a message light on. However, to actually turn on my phone I have to hold down the power and volume button for 10 seconds...EVERY MORNING...
    I have heard and performed all the storied Verizon gives me..empty casche-done. I have turned every single app to "manual" update vs automatic as they told me an app may be auto updating causing the shut down (don't know how I got a Zappo's app but it was constantly updating.)
    The new story Verizon tells me is that the shutdown was due to "a recent update...we are working on a new update to fix this bug"
    I'm so ready to be done...someone tell me they are working on an update...PLLLEEEAAASE!

        Congratulations on your new Razr Maxx,kmum357!
    I regret to see that you are having problems with it after it is fully charged. I need additional information from you. When you charge it overnight, is it powered on or off?
    You already mentioned that you have done troubleshooting steps that have been provided, therefore, I don't want you to repeat any unnecessary steps.
    Have we asked you to try to charge while in Safe Mode? http://bit.ly/OJWrbo
    Are you using any of the Smart Actions http://vz.to/10irowq? If so, I also ask that you disable them to test the charging again.
    Please let me know your results.
    Tamara H.
    Follow us on Twitter @VZWSupport

  • HP dv3-2000 audio service not start after i run uniblue powersuite. event log says can't find path.

    after i run uniblue powersuite to clean up my registry, speedup my pc and update my drivers, I cannot start my dv3-2000 laptop. After I updated the BIOS, following the suggestion on the forum, I can get the vista start but no sound. I then checked the event log which says the audio service cannot start because it can't find the path specified. How can I solve this problem?

    If the printer is connected USB to the Windows 7 machine, what you can do is share it to the network (assuming the XP computer is also connected to the same network). This way the XP machine can see the printer on the Windows 7 computer and install it. The only drawback is that the Windows 7 computer will need to be powered on for the XP computer to be able to see and print to it. I have linked a third party site below for instructions on how to do this.
    http://www.howtogeek.com/howto/windows-7/share-fil​es-and-printers-between-windows-7-and-xp/
    Binary_Zen (worked at HP )
    Click the white Kudos star to say thanks
    Please mark Accept As Solution if it solves your problem

  • SQL Server Reporting services. failed to establish connection with project server. verify the url is correct.

    Dear All,
    I'm working on reporting of Project Server 2010, while configuring SQL SERVER REPORTING SERVICES faced issue after two complete days of troubleshooting along with this gone through plenty of forums, unable to figure out any solution. So finally posting on
    technet in order to find solution.
    ISSUE/PROBLEM:
    At initial configured the SQL REPORTING CONFIGURATION to sharepoint integrated database (SQL SERVER is installed on seperate machine), change the service to Domain Account and also installed sharepoint add in on server story was fine at this point. Furthur
    moving to SHAREPOINT ADMIN console and while configuring the Sharepoint Integrated Reporting continuously facing this error:
    Failed to establish connection with report server. . . . (Snapshot is attached for your further reference).
    My point of concern is that whenerver i try to open the REPORT SERVER URL on project server machine it prompts me to enter username and password but whenever i insert the domain credentails it didnt accept though it can be accesible by using the credentials
    of Local Admin of sql server machine. So i wana come to know whether its permission issue if yes then where i should mention the domain credentials.? 
    REGARDS DANISH DANIE

    Dear Paul,
    I am able to open the URL (http://psdb/ReportServer )using
    domian credential and page open with these contents
    Reporting Services Error
    The configuration parameter SharePointIntegrated is set to True but Share Point Object Model cannot be loaded
    Second,
    Configured the SPN on domain controller , performed the steps required to change the AUTHENTICATION in rsreportserver.config
    file also done the registry settings to disable the loop back settings.
    Same error still ! .... what should i do now ??? 
    REGARDS DANISH DANIE

  • Photos go black after editing in iPhoto

    I recently imported some new photos into iPhoto and edited a few slightly in iPhoto (blemishes). After editing, I viewed the event they were in and the edited photos were black. They are not black in the thumbnails but when I double-click to view larger or go full screen, the edited photos are black. After reverting to the original image of the 3 or 4 I edited, the photos return. Is this a known bug?

    Back Up and try rebuild the library: hold down the apple and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild.
    If that fails:
    Start with the troubleshooting basics:
    1. Repair Permissions using Disk Utility
    2. Delete the com.apple.iPhoto.plist file from the HD/Users/ Your Name / library / preferences folder. You'll need to reset your User options afterwards.
    3. Create a new account (systempreferences -> accounts) and see if the problem is repeated there. If it is, then a re-install of the app might be indicated. If it's not, then it's likely the app is okay and the problem is something in the main account.
    Regards
    TD

  • Could Calendar services not available after reboot be LDAP problem?

    I followed this installation guide:
    https://wikis.oracle.com/display/CommSuite7U2/Communications+Suite+on+a+Single+Host+%28Linux%29#CommunicationsSuiteonaSingleHost%28Linux%29-InstallingCommunicationsSuite7Update2Software
    I have successfully installed and set up the Oracle UCS Sun7 update 2 server. Calendar works ( if I don't reboot the server ).
    However, when I reboot the server, Calendar service is unavailable.
    Important information for when I installed Oracle UCS sun 7 update 2 by following the installation guide:
    I have noticed when browsing through the folders, that there was already a 'dsee6' folder for the Oracle Linux I started from. Following the example installation for the Oracle Linux 5 with GlassFish install, I was instructed to download a new Directory Server. Following the instructions on page 7 of the install guide listed above, I made another folder 'dsee7'. I am wondering if I should never have downloaded this new Directory Server as instructed on page 6 "Get the Software". The install guide actually does not mention where to get the Directory Server from, so I just went to the edelivery site and figured it out myself. Anyways, under the "Installing and Configuring Directory Server" section, #3, I was instructed to "mv dsee7 /opt/sun/directory". In this folder, /opt/sun/directory/bin, there will be "./dsadmin" utility that can be ran. This is used to do many things with the Directory Server including starting it. Here is how I started it:
    cd /opt/sun/directory/bin
    ./dsadm create /var/opt/sun/directory/dsins1
    ./dsconf create-suffix "0=isp"
    Also, I downloaded the Directory Server from edelivery - Oracle Directory Server Enterprise Edition 11gR1 Patch Set 1 for Linux x86-64
    Then, I ended up running to get it set up:
    ./dsccsetup ads-create
    ./dsccsetup war-file-create
    $ ./dsccsetup cacao-reg
    ./dsccsetup status
    Then, it looked like the dcss agent is registered in cacao.
    So, if we forward ahead to page 9 of the install guide, "Preparing the Directory", I ran this and prepared the directory. After I finished installation, I could restart the Directory Server with no problems, as long as I did not reboot the machine. I would restart the Directory Server like so:
    cd /opt/sun/directory/bin
    ./dsadmin stop-domain domain1
    ./dsadmin start-domain domain1
    However, if I rebooted the machine, I could still start and stop the Directory Server as noted. But, the Calendar Services were not available.
    The only reason I wonder about this LDAP Server possibly being the cause of this is because I had at one point configured the services to start on boot. I followed these instructions:
    https://wikis.oracle.com/display/CommSuite7U2/Start+and+Stop+Scripts+for+Communications+Suite+%28Linux%29
    I am using a VMSphere client to host this set up. So, since that point of configuring the services to start up, I have rolled the snap shot back so that the services are no longer set up to start on boot. But, when they were, and I rebooted the machine, I could see ldap 389 errors all over the place. So, that lead me to roll my snap shot back in effort to try and fix the ldap errors. I no longer get LDAP errors since I rolled my snap shot back. But, like I said, I no longer have any of the services, including the LDAP, to start on boot as noted in the above link that instructs us how to do this.
    After reboot, I run these commands to get the server up and running:
    Start GlassFish server:
    cd /opt/sun/SUNWappserver/bin
    ./startserv
    Start web ( Messaging Server I think ):
    cd /opt/sun/comms/messaging64/bin
    ./start-msg
    Start LDAP ( Directory Server )
    cd /opt/sun/directory/bin
    ./dsadm start /var/opt/sun/directory/dsins1
    Start Mysql
    cd/etc/init.d
    ./mysqld start
    All of those commands complete without problem. I can log into the convergence web, I can hit the delegated administrator, I can log into the GlassFish admin console, and I can see my calendar folder when I hit it in the web ( http://myServer.com/davserver/dav/home/userName/calendar/ ).
    So, in summary, I am wondering if anyone knows if this supposed second Directory Server is causing my problems since I started with Oracle Linux 5 and Oracle Linux 5 appeared to have the folder dsee6 already installed with it. Could this be why my calendar services are not starting after reboot but are working before reboot?
    ( Also, all of my posts keep getting deleted. Can someone please email me if someone from Oracle is deleting my posts and tell me why they are getting deleted? )
    Edited by: ntfytim16 on Mar 5, 2012 7:41 AM
    Some of my steps were out of order. Cleaned them up so it is easier to understand.

    Here is my error0.log which is in the /var/opt/sun/comms/davserver/logs folder:
    =========================
    Last packet sent to the server was 0 ms ago.
    SEVERE [2012-03-01T05:10:26.033-0500] <...DavServer.loadBackend> failed to instantiate or create backend com.sun.comms.davserver.backends.BackendException: Cannot get Initial Database Information: java.sql.SQLException: Error in allocating a connection. Cause: Connection could not be allocated because: Communications link failure
    Last packet sent to the server was 0 ms ago.(OPERATION_NOT_SUPPORTED)
    INFO [2012-03-01T05:10:26.033-0500] <...DavServer.loadBackend> Loading backend ischedulebackend with backendid ischedulebackend
    INFO [2012-03-01T05:10:26.034-0500] <...DavServer.loadBackend>      JDBC JNDI Name = jdbc/ischedulebackend
    SEVERE [2012-03-01T05:10:26.177-0500] <...JdbcBackend.queryDatabaseType> Cannot get Initial Database Information: java.sql.SQLException: Error in allocating a connection. Cause: Connection could not be allocated because: Communications link failure
    Last packet sent to the server was 0 ms ago.
    SEVERE [2012-03-01T05:10:26.177-0500] <...DavServer.loadBackend> failed to instantiate or create backend com.sun.comms.davserver.backends.BackendException: Cannot get Initial Database Information: java.sql.SQLException: Error in allocating a connection. Cause: Connection could not be allocated because: Communications link failure
    Last packet sent to the server was 0 ms ago.(OPERATION_NOT_SUPPORTED)
    INFO [2012-03-01T05:10:26.209-0500] <...DavServer.loadBackends> iSchedule enabled
    WARNING [2012-03-01T05:10:26.209-0500] <...DavServer.loadBackends> iSchedule URI is configured but can't find ischedule backend.
    SEVERE [2012-03-01T05:10:29.567-0500] <...LDAPSingleHostPool.buildConnection> buildConnection: got LDAPException while connecting to Pool number:0. Host=myServer.com :netscape.ldap.LDAPException: failed to connect to server ldap://myServer.com:389 (91)
    SEVERE [2012-03-01T05:10:29.568-0500] <...LDAPSingleHostPool.buildConnection> buildConnection: got LDAPException while connecting to Pool number:0. Host=myServer.com :netscape.ldap.LDAPException: failed to connect to server ldap://myServer.com:389 (91)
    WARNING [2012-03-01T05:10:29.568-0500] <...LDAPFailoverPool.getConnection> Fatal Error: All LDAP servers are down.
    ======================
    Does that look like an LDAP issue to you?
    "Fatal Error: All LDAP servers are down."
    Edited by: ntfytim16 on Mar 5, 2012 10:13 AM
    Changed one server address

  • OSX Server 3 Failed to Update Services, Reboot Fails now

    I upgraded my Mini Server to Mavericks, then installed the Server 3 upgrade (paid $19.99).  The installation hangs during "Updating Services" and most windows become unresponsive.  Remains in that state for hours.  I lost patience and rebooted from a remote ssh session.  Now the server doesn't reboot.  I restored back to 10.8.5.
    Has anyone encountered and resolved this condition?
    To be precise, during the Update Services process, the gauge stops at the "d" in Updating... label.

    I had the same problem. Finally found a solution that appears to work fine.
    Using any free app uninstaller, remove "server" from your applications and remove it and all of its related files.
    Empty the trash.
    Restart your Mac holding down the 'shift' key. This puts you in safe mode.
    Go to the Apple app store and re-download the "server" app.It will ,et you do this, becuase it cannot find a copy of the app anyplace on your computer.
    After downloading and installation, configure the 'server' app following its commands.
    Restart as usual .... presto ... works!
    You can then re-configure as required.

  • Search Service Application problems after upgrading from Foundation to Enterprise edition of SharePoint 2013

    Hi all. I have been searching for days for a solution to a problem I am having with SP2013 Enterprise edition.
    We recently upgraded from SP2013 Foundation to SP2013 Enterprise. After the upgrade, the search services are no longer working and we are receiving many application log entries indicating the following:
    Application Server Administration job failed for service instance Microsoft.Office.Server.Search.Administration.SearchServiceInstance (ea2019ef-bb9e-4efe-85ee-5d2307406f31).
    Reason: Access is denied. (Exception from HRESULT: 0x80070005 (E_ACCESSDENIED))
    Technical Support Details:
    System.UnauthorizedAccessException: Access is denied. (Exception from HRESULT: 0x80070005 (E_ACCESSDENIED))
       at Microsoft.Office.Server.Search.Administration.SearchServiceInstance.Synchronize()
       at Microsoft.Office.Server.Administration.ApplicationServerJob.ProvisionLocalSharedServiceInstances(Boolean isAdministrationServiceJob)
    as well as:
    Application Server Administration job failed for service instance Microsoft.Office.Server.Search.Administration.SearchServiceInstance (ea2019ef-bb9e-4efe-85ee-5d2307406f31).
    Reason: The object you are trying to create already exists. Try again using a different name.  
    Technical Support Details:
    System.Runtime.InteropServices.COMException (0x80040D02): The object you are trying to create already exists. Try again using a different name.  
       at Microsoft.Office.Server.Search.Administration.SearchServiceInstance.Synchronize()
       at Microsoft.Office.Server.Administration.ApplicationServerJob.ProvisionLocalSharedServiceInstances(Boolean isAdministrationServiceJob)
    I have tried to remove the search service application and recreate it, and even though the SharePoint Central Administration states that it was created successfully, I am still getting the same errors in the log. If I go to the Search Service Application
    Search Administration page, the "System Status" shows the following message:
    The search service is not able to connect to the machine that hosts the administration component. Verify that the administration component '0359af35-0982-4ede-8838-b1d390e915bf' in search application 'Search Service Application' is in a good state and
    try again
    Additionally, under the "Search Application Topology" section, it states "Unable to retrieve topology component health states. This may be because the admin component is not up and running" which I assume is normal if the admin is not
    running.
    Does anyone know how I can resolve this problem? 
    Thanks!

    Hi Joaquin,
    According to your description, the error occurred when you re-created the Search Service Application.
    Based on the error message, I recommend to verify the things below:
       1. Check if the association between the Search Service Application proxy and the web application is configured.
    Please go to Central Administration > Application Management > Configured service application associations > Click Default to see if the Search Service application is checked.
       2. Change the app pool for the Search Service Application to SharePoint Web Services Default in the properties of the Search Service Application.
    Please go to Central Administration > Application Management > Manage service applications > Highlight the Search Service Application > Click Properties in the ribbon > Change
    the two app pool to SharePoint Web Services Default: App Pool For Search Admin Web Service and Application Pool for Search Query and Site Settings Web Service.
        3. Run PS command to check if the search admin timer job is enabled: Get-SPTimerJob
    job-application-server-admin-service | fl. If it is not enabled, use PS command to enabled it and then reset Internet Information Services: Enable-SPTimerJob job-application-server-admin-service.
    Best regards.
    Thanks
    Victoria Xia
    TechNet Community Support

  • RDL Reports are not working after installing SQL Server 2012 Service Pack 2 in the SharePoint integration Mode

    I am using Reporting Service Integration mode with SharePoint. SSRS is installed on separated machine of SharePoint stacks in Integration Mode. Everything was working properly and I could create/edit/modify RDL reports(parameters, Datasource, Subscription)
    inside SharePoint and Document Libraries.
    But after installing SQL Server 2012 Service Pack 2, on opening RDL reports inside SharePoint I receive this error message. 
    The permissions granted to user 'i:0#.f|membership|username' are insufficient for performing this operation. ---> Microsoft.ReportingServices.Diagnostics.Utilities.AccessDeniedException: The permissions granted to user 'i:0#.f|membership|username' are insufficient for performing this operation
    I should mention that SSRS is installed in the SharePoint integration Mode and there is no SSRS management console.

    Hi Hedayat-Abedijoo,
    According to your description, you are using Reporting Services in SharePoint Integrated mode, and everything worked fine before you install SQL Server 2012 Service Pack 2. After the package is installed, when you open RDL reports, the error occurred: The
    permissions granted to user 'i:0#.f|membership|username' are insufficient for performing this operation.
    According to my search, there may be two reasons for the problem:
    This is caused when the application pool account that runs the SharePoint Web application you are on in IIS and the application pool account that SharePoint believes is running the site differ. This happens if the application pool account is changed directly
    in IIS instead of through SharePoint (using the approved method).
    This error can be caused when Kerberos authentication has been set up correctly and delegation in a double hop scenario will succeed, but Reporting Services integration has been set up for Trusted Account rather than Windows Authentication. This causes
    SharePoint to continue to impersonate the logged-on user when contacting Reporting Services; when Reporting Services compares the application pool account to the user account making the request, they are not equal.
    In this case, we can solve the problem by changing the application pool account in IIS back to the previous account and set AuthenticationTypes to RSWindowsNTLM only. For detail information, please refer to 8.3 “The permissions granted to user 'Domain\User'
    are insufficient for performing this operation” in the document:http://msdn.microsoft.com/en-us/library/ee384252(SQL.100).aspx
    If you have any questions, please feel free to let me know.
    Thanks,
    Wendy Fu

  • Windows 2008 R2 Server without Service Pack 1 was flag "Not Required" during the SCCM patching/deploying SP1 for 2008

    Dear Brothers,
    I come to a scenario were one of our Windows 2008 R2 Server without Service Pack 1, was Flag under SCCM 2007 Reports Update Status for Service Pack 1 deployment to be "Not
    Required" which definitely inaccurate.
    What I want to know what are the conditions for the Software Update to send a status to SCCM Server that the Service Pack is “Not
    Required” instead of the other way around?
    Is there anyone that can guide me to any KB Article regarding this behavior?
    Regards,

    Yes, I know this is an old post, I’m trying to clean them up. Did you figure this out, if so how?
    I have seen this before and what I have done is manually applied the SP1 to the server. Only then did the error show up as why SP1 didn’t apply. After fixing the error, CM was apply to apply SP1 and other SU to the server.
    http://www.enhansoft.com/

  • MDM Server Window Service failed after adding server password

    After adding MDM server password, MDM server window service can't start up. We have to use clix command to start the server. Is there anyway to fix window service problem?

    Hi Jean,
    From the version number it sounds like you're using version 5.5 SP4, right? The Console application was significantly changed in SP5 and you would no longer see the locked server icon... If you unmount the server from the Console, and re-mount it, isn't there an option on the context menu for the tree (right-click on the server node) to provide the password? Did you try "Connect to Server" or "Start Server" on this context menu?
    Thanks... I don't know if I can help you with your problem, but I will try!
    -Cleopatra
    Message was edited by: Author - found the option on the context menu to provide the password to the server
            Cleopatra Von Ludwig
    Message was edited by:
            Cleopatra Von Ludwig

  • After Installing SQL Server 2012 Service Pack the RDL reports do not work

    I installed SQL Server 2012 Service Pack on backEnd sharepoint and also on BI Server that host Reporting Service.(Before installation everything was working properly)
    After this installation the RDL reports do not open and I receive this error message.
    The permissions granted to user 'domain\username' are insufficient for performing this operation. (rsAccessDenied)
    I also receive the same error message on changing DataSource, Parameters and subscription.
    I should mention that, I am using Reporting Services in the Integration Mode. I want to open and modify RDL reports from SharePoint and inside the SharePoint Document Library.

    Hi Hedayat,
    Thanks for posting your issue,
    To solve this problem you have to grant your SQL Reporting Service Application Pool
    Account (whatever is running your SQL Service Application, see Central Admin -> Manage Service Application -> SQL Server Reporting Services)
    Full Control to the web application that report is being deployed to in your particular case.
    Or you could just use the powershell command below:
    $webApp = Get-SPWebApplication –Identity http://yoursharepointapp 
    $webApp.GrantAccessToProcessIdentity(“domain\SSRSAccount”) 
    Also, check out below mentioned URLs for more details and fixes of this issue
    http://paulliebrand.com/2013/09/25/ssrs-and-permissions-granted-to-user-are-insufficient-for-performing-this-operation/
    https://social.msdn.microsoft.com/Forums/sqlserver/en-US/4ea477ec-ea12-4a3e-bc33-2fcf9d52b84e/error-rsaccessdenied-nt-authoritynetwork-service-are-insufficient?forum=sqlreportingservices
    I hope this is helpful to you, mark it as Helpful.
    If this works, Please mark it as Answered.
    Regards,
    Dharmendra Singh (MCPD-EA | MCTS)
    Blog : http://sharepoint-community.net/profile/DharmendraSingh

Maybe you are looking for

  • Adobe Illustrator CS2 Runtime Error

    I have Adobe Creative Suite 2.0 and am running Windows 7 on my PC. Although all the other applications in the CS2 suite launch successfully, I receive a Runtime Error with each attempt to open Adobe Illustrator that reads: "Program:-rator CS2\Support

  • Error in loading a class using for.className("Math");

    can any one tell me as wat bug is there in the following code.i am unable to run the application. import java.lang.*; import java.io.*; public class App2 public static void main(String a[]) throws Exception Class c=Class.forName( "Math"); System.out.

  • Dynamic PL/SQL code into ODI Procedure

    Hi guys: I have a PL/SQL code to execute into a ODI proc that changes because of a loop. I have to update N tables that have the same prefix and its sufix is the dynamic part of my PL/SQL. Also I have to set the DT_ETL (I already have a variable in m

  • Workflow emails and IMAP

    We've enabled the IMAP server that ships with AIX 5.2 and are able to telnet to port 143 on that server and talk IMAP through it, so we believe it is working. From Workflow we are able to send out SMTP mails to Outlook, and replies from Outlook find

  • Display as is having what data type?

    Hi Friends, I have an item in page and i have selected that item as display as. Then what data type it contains by default. Regards