Is the board dead?

i have my neo2 working fine for a couple of days. i then thought id have a little play with some light overclocking. all was fine till i hit 233 fsb then the computer would not boot at all. i have tried to reset the cmos, taken the battery out but it still will not boot. Ive used the d bracket and when it starts it has top right and both bottom leds lit which says it start chipset init.
is this a dead board ?

See Clear CMOS with jumper JBAT1 Quote
With system powered off
Quote
never had a problem with clearing it ever on any board
bin pretty lucky then

Similar Messages

  • Is my board dead????

    Got my board yesterday and installed it. Everything powers up, but the northbridge fan doesn't spin andI get nothing from the onboard NIC or from the keyboard, mouse, and nothing displays on the monitor. I took the board out and reinstalled it to make sure nothing was shorting out in the case,but same results. Does it sound like it's dead? It does to me so I guess it may be RMA time.

    Have you tried to remove, then replace, DIMM MODS.?.. ...What do you mean when you say "Everything powers up but...? What is powering up?, the CPU fan? the D-LED lights?...Are you able to get into the BIOS?. You can also try to reset the CMOS...Take the BATT. out and put back in...Let us know ...As until you try some more things I can't say that it is really DEAD...Hope something works ...PS....Check to make sure that you have the MAIN (20 pin) and the Proc.(4 pin) Power pins Plugged in...Sean REILLY875

  • Eclipse board dead?

    Hello,
    I have an eclipse board that stopped working as soon as I installed it in another case.
    I know what I'm doing so I don't see the odds as a personal screw-up too high, although considering the nature of when the problem began and the difficulty is seems to resolve it, makes me doubt.
    pressing the power button nothing happens, power supply doesn't seem to react (even though it works tested on another pc)
    using the panel buttons on the board doesn't do anything.
    Actually it's basicly dead, except for the one LED I marked on the .jpg.
    When searching in the board's manual,  it just says 'Standby led' and thats it.
    Is there anything at all I can try at this point?
    I removed battery for a while, I tried the jumpers method.. nothing at all..
    It's definitely a motherboard error, eliminated other possibilities.
    Thanks in advance!

    Quote from: Froggy Gremlin on 15-January-13, 21:32:01
    Test it outside of the case in a 'barebones' configuration.
    Thankyou for the quick reply Froggy Gremlin.
    I have, just the board and the power supply, using the on board power buttons..they light up but that's it.
    The power doesn't do anything more than lighting up those buttons and the mysterious "Standby LED" in any circumstance I tried. Did it with RAM / processor / etc and without... even though I'm very sure it has nothing to do with other hardware failing besides the board.

  • IPads for the board of directors.  Are they tied to one itunes account?

    We want our Board of Directors to have iPads.  They will use them to access the 350 page board agenda book.  They will need apps to view (goodreader, etc.) and mark up the PDF agendas.  I am guessing we would have a board dropbox account, also tie all 16 iPads to a single iTunes account.  I can't imagine we would try to get each board member to hook up to their personal iTunes account (if they even have them.)    The sticky part is that we want the board to keep the iPads (not collected after class) Anyone have experience with this?

    I am interested in doing the same thing. I have heard of others using www.dropbox.com to securely distribute files to the iPads, but have not found a good way to also use them as display devices for some presentations that may be given during a meeting. Have you made any progress on this initiative since July? Regarding the single iTunes account we have done that with iPads which have been distributed to staff our clinicians for use with the Electronic Medical Record, but have not yet implemented (or identified) any tools to remotely maintain these devices.

  • Hello, I have a problem with my mac book pro after running the battery dead on a game.  The display has shrunk leaving two black margins on either side. What to do ?

    Hello, I have a problem with my mac book pro after running the battery dead on a game.  The display has shrunk leaving two black margins on either side. What to do ?

    Go to System Preferences>Displays and set the resolution to "Best for this computer" (or something to that effect).
    Clinton

  • I previously downloaded The Walking Dead from iTunes to my iPhone. I deleted it to make space but now it no longer shows up on my purchased list on Apple TV. How do I get it back there?  My iphone shows it is in the cloud.

    How do I get a purchased show or movie to show up on Apple TV after I deleted or from my iphone? It is in the cloud on my phone but nowhere to be found on Apple TV.

    Hello compugrrl998,
    Thank you for the details of the issue you are experiencing with watching The Walking Dead on your Apple TV.  I am sure you are eager to watch it on your television. 
    Have you tried checking specifically in Movies > Purchased or TV Shows > Purchased on the Apple TV?
    Play previous purchases on Apple TV
    You need Apple TV (2nd generation or later) to play content on Apple TV. Some features require the latest version of Apple TV software. If they're available in 1080p, you can play previously-purchased 720p HD TV shows and movies in 1080p.
    Movies and TV shows
    On the Apple TV main menu, choose Movies > Purchased or TV Shows > Purchased.
    Select the item you want to view.
    Choose Play.
    Download past purchases
    http://support.apple.com/kb/ht2519
    If you are looking there and not seeing the episodes, I recommend verifying that you are signed in with the same Apple ID on the Apple TV that you are signed in with on your iPhone.
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • My macbook pro goes to sleep by it does not wake up. I have to restart it. I had recently to change the board in the attached Thunderbolt display.

    my macbook pro goes to sleep by it does not wake up afterwards. I have to restart it. I had recently to change the board in the attached Thunderbolt display, because I noticed that the same problem arose when the display was attached.
    Now with the new board, it can't be the display's fault. I hope it is not macbook pro's main board fault. Maybe hasthe notebook board been damaged by the faulty display?
    To bring my MacBook Pro to service will slow down my work. This is why I am posting this message, in the hope to be able to run a diagnostic test myself.
    Thanks a lot, in advance.

    Hello Aminetti,
    It sounds like your computer goes to sleep, and will not wake up, so you must manually restart your computer. I recommend the troubleshooting in the following article:
    OS X: When your Mac doesn't sleep or wake
    http://support.apple.com/kb/TS5357
    Reset SMC
    Reset NVRAM/PRAM
    Test with external devices disconnected
    Try Safe Mode
    Try another user account
    Thank you for using Apple Support Communities.
    All the best,
    Sterling

  • Hi When going from Develop module to print module a white boarder appears on screen which also prints via my epson r3000 printer. I can get round this by exporting photo to Elements and printing from there but can i get rid of the boarder and print from l

    Hi When going from Develop module to print module a white boarder appears on screen which also prints via my epson r3000 printer. I can get round this by exporting photo to Elements and printing from there but can i get rid of the boarder and print from lightroom?

    In the printer driver (accessed through the Page Setup button) set the Advanced tab to borderless. Then in the right hand panel under Layout set all the margins to zero.

  • I AM TRYING TO PUT TEXT ON A PHOTO AND USE THE T ON THE BOARD BUT I GET A MESSAGE SAYING PROGRAM ERROR AND IT DOSNT LET ME PUT ANY PRINT .

    I AM TRYING TO PUT TEXT ON  A PHOTO USING THE T ON THE BOARD. I GET  A MESSAGE SAYING PROGRAM ERROR AND IT DOSNT LET ME ADD TEXT.

    There's something wrong with your Photoshop install.
    BOILERPLATE TEXT:
    If you give complete and detailed information about your setup and the issue at hand, such as your platform (Mac or Win), exact versions of your OS, of Photoshop and of Bridge, machine specs, what troubleshooting steps you have taken so far, what error message(s) you receive, if having issues opening raw files also the exact camera make and model that generated them, etc., someone may be able to help you.
    Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
    http://forums.adobe.com/thread/419981?tstart=0
    Thanks!

  • Why is there a huge white space to the right of the board when I play Lexulous on Facebook?

    I play Lexulous (a form of Scrabble) on Facebook. For months now, whenever I play the game, there is a huge white space to the right of the board, like a whole other window. Only with this app. I tried another browser, same thing, and it also does it on my laptop (MacBook Pro). I asked the Lexulous help desk and attached a screenshot; they had no idea what would cause that to happen. I asked a couple of my regular opponents and they are not seeing it. It's really annoying because if I accidentally touch my mouse to the bottom scroll bar, the board slides offscreen to the left.
    Sorry if this is the wrong forum for this question, but I'd like to fix it.

    If you are using Safari to connect to Facebook, try this on one of the Macs.
    From the Safari menu bar click Safari > Preferences then select the Extensions tab.
    If there are any installled, turn that OFF, quit and relaunch Safari and try that game.

  • I play scrabble on Lexulus, when using firefox my current game board is not displayed, however, when I use internet explorer , the board is displayed. Any idea why?

    I play scrabble with a friend on Lexulus, when she has made a play
    I get an e-mail on AOL with a link to Lexulus. That link takes me to the site and the game but the board doesn't show. On internet explorer it does.

    I should have explained further. The game opens in a new window over to the upper left of my screen, leaving the original page underneath. I tried minimizing it so that I could get to my toolbar and did the View > Zoom > Reset. This has no effect. The lower portion of the game is still not showing. Using other browsers the window or frame of the game is much larger, therefore everything shows.

  • Why is the menu structure different for different OS environments? What would it take to make them the same across the board?

    The questions in the title pretty well say it all. Each version of the program works differently and wondering what it would take to standardized them for being the same across the board. Menu items are in different locations depending on what OS you are using. Putting the cursors in the URL line works differently from one OS to the next. It would be nice to create an equal standard for working under all OS types.

    Firefox follows the convention for each OS as to where it places and what it calls menu items. The most noticeable is the Options/Preferences dialog.

  • The Walking Dead Multi-Pass

    Im getting a 32gb 4th gen next month.  If i buy the multi pass for the walking dead now will i still have the pass when i download it next month?

    I currently own a 8gb 4th gen BTW!

  • Is the FIREWIRE DEAD!

    I wish that I would have know that firewire would not work with the 5th gen. My iPod hard drive when bad 15 days after warranty expired. Now I cannot use the firewire cables for anything but charging.
    Has anyone heard about why it will not work?
    Are they going to develop a patch to have it work?
    Is the firewire dead?

    I just got the new 60GB video ipod as a gift. I am an owner of the FIRST gen. ipod, which seemed to work just fine with only firewire. I am seriously ******. How is it that the last 3 generations of the ipod were compatible with both firewire and USB, but now they decide to settle for the slower (though not much) connection? Saving $? Well, in the process they've alienated their loyal Mac users, such as myself. I have a G4 mirror tower running 10.2.8, so I have to go spend $35 on a USB 2.0 PCI card, and $120 upgrading to 10.4 so I can use the video function, all because Apple wants to sell more to Windows users. This really *****. I understand technological development, but it should at least be compatible with machines that are only 2 years old. What the **** else can I do?

  • HT3775 I am not able to convert movies, keep getting this message The document "The Walking Dead Trailer - YouTube-2.mp4" could not be opened. The movie's file format isn't recognized. not sure why, anybody know

    I am not able to convert movies, keep getting this message The document “The Walking Dead Trailer - YouTube-2.mp4” could not be opened. The movie's file format isn't recognized. not sure why, anybody know

    Sounds like someone ripped the movie off of YouTube and it got corrupted in the process. Try getting the movie file again, or try using an alternative movie player such as VLC: http://www.videolan.org

Maybe you are looking for