Is the lightroom installer broken ... I cant get the CC version to install

Just upgraded to a new Hard Drive and re installing everything.
I downloaded PS earlier, and that was fine.
I keep getting an error with Lr
Exit Code: 7
Please see specific errors below for troubleshooting. For example, ERROR:
-------------------------------------- Summary --------------------------------------
- 0 fatal error(s), 2 error(s)
----------- Payload: Adobe Photoshop Lightroom 5 5.3.0.0 Adobe_Lightroom_x64.msi_5.3 -----------
ERROR: Install MSI payload failed with error: 1624 - Error applying transforms. Verify that the specified transform paths are valid.
MSI Error message:
ERROR: Third party payload installer Adobe_Lightroom_x64.msi failed with exit code: 1624
Any help please
Keith Hart aka ownimage

Hi Keith Hart,
Please refer to this Forum Link.
http://forums.adobe.com/message/5928598#5928598
Hope it helps.
Regards,
Abhijit

Similar Messages

HT4113 my i5 screen is broken, i cant get through my passcode to back up my pictures to my computer, can someone help?

my i5 screen is broken, i cant get through my passcode to back up my pictures to my computer, can someone help?

Is it that you cant see the screen or you cant use the touchpanel??
If you have synced with itunes since you set that passcode you should be able to do an itunes backup which will save the photos even without entering the passcode.

Cant get CS6 Master Collection to Install! HELP!!!!!

Cant get CS6 Master Collection to Install. Migrated to a new Mac Pro 5,1 Single Quad Core 3.2, 32GB of Ram. CS6 Apps worked fine until I tried to launch Illustrator. Illustrator just hangs and finally have to force quit. Tried reinstalling it, and the intalller and uninstaller don't work. I've restarted as suggested...same thing. I've use the Adobe Cleaner...no luck. Downloaded the installer again and tried....no luck.
Bunch of errors starting with "DW051". All end with "has changed." I've called tech support and retried all the above...no luck. (Poorest customer support on the planet)
Attached is an image of the messages including the errors. Please help. I'm loosing my mind.

Thanks Manish-Sharma. I found solution on another post yesterday but I tried all the ways listed above again....no results though. The only progress I did make is that the installer does run and finish! Finally got this new result by placing the current Illustrator Folder from the Applications folder into the trash without deleting it. I launched the Master Collection installer and only selected Illustrator for the install. (All other apps work fine) It did install the new Illustrator application in the Applications folder. Then I launched Illustrator and the same thing happens. The icon starts bouncing in the dock, but that's it. No startup screen...nothing. After a few minutes I check and "Adobe Illustrator is not responding" so I have to force quit.
I was on the phone with Adobe support and established a case # 0183688527 yesterday. They had me do the things you've suggested and more with no results. Sent them an update on other methods I've tried last night. They're supposed to get back to you in 24 hours. 28 hours later.....Haven't heard a word from them.
Any more input is welcome. This really sucks.
Thanks again for your input
F

I have upgraded my OX from mountain lion to mavericks . the installer is asking for previous product key. How to know about previous key as the trial version is installed and I have paid for upgrade cost?

I have upgraded my OX from mountain lion to mavericks . the installer is asking for previous product key. How to know about previous key as the trial version is installed and I have paid for upgrade cost? I dont have the previous product key.

virenkhare wrote:
I have upgraded my OX from mountain lion to mavericks . the installer is asking for previous product key. How to know about previous key as the trial version is installed and I have paid for upgrade cost? I dont have the previous product key.
There are no keys, there is no trial version of OSX (ML or Mavericks) and Mavericks is free
What have you downloaded, and where did you get it

HT4759 how can i get the right version to install icloud on my mac

how can i get the right version to install icloud on my mac

Open the Mac App Store and buy Mountain Lion.
(90636)

My ITunes got corrupted and I kept getting a message when updating iTunes64msi missing so I uninstalled all files and I thought I removed all registry values but when reinstalling I get an older version is installed and cannot be removed. I need a soluti

My ITunes got corrupted and I kept getting a message when updating iTunes64msi missing so I uninstalled all files and I thought I removed all registry values but when reinstalling I get an older version is installed and cannot be removed. I need a solution.

(1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
(2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
(3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
(4) In the list of programs that appears in CleanUp, select any Bonjour entries and click "Remove", as per the following screenshot:
(5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

How do you unblock a blocked plug-ins safari? when i go to the updated version to install it, it still tells me "blocked plug-in".

how do you unblock a blocked plug-ins safari? when i go to the updated version to install it, it still tells me "blocked plug-in".

I'll assume you mean Flash. If you're sure you've installed the latest version of Flash, take each of the following steps that you haven't already tried. After each step, relaunch Safari and test. For a "missing plug-in" error, start with Step 5.
1. If you're only having trouble with YouTube videos, sign in to your YouTube account and load this page. You may see a link with the text "Leave the HTML5 Trial." If so, click that link.
2. If you're getting a "blocked plug-in" error, then from the menu bar select
 ▹ System Preferences… ▹ Flash Player ▹ Advanced
and click Check Now. Quit and relaunch your browser.
3. Triple-click the line below to select it:
/Library/Internet Plug-Ins
Right-click or control-click the highlighted text and select
Services ▹ Open
from the contextual menu. A folder should open. Delete the following item, or anything with a similar name, if present:
Flash Player (failing).plugin
You may be prompted for your login password.
4. Re-download and reinstall Flash. Download it from this page:
Adobe - Install Adobe Flash Player
Never download a Flash update from anywhere else.
5. If you get a "missing plug-in" error, select
Safari ▹ Preferences... ▹ Security
from the Safari menu bar and check the box marked Enable plug-ins.
6. Select
Safari ▹ Preferences... ▹ Extensions
from the Safari menu bar. If any extensions are installed, disable them.
7. In the Safari preference window, select
Privacy ▹ Remove All Website Data
Close the window. Then select
 ▹ System Preferences… ▹ Flash Player ▹ Advanced
and click Delete All. Close the preference pane.

I want install an old version of itune since the new version does not sync with my iPhone but the old version I installed did not play rather it says that it can't read a file itune library .itl written by Newer version what do Ido

I install an old version of itune since the new version does not sync with my iPhone but the old version I installed did not play rather it says that it can't read a file 'itune library .itl' written by Newer version of itune how do I installed this old version to work

You need to restore the pre-upgrade backup of the library file in the manner shown in Empty/corrupt library after upgrade/crash.
tt2

I ordered Office 2011 with my MBA, but only the trial version came installed - and no product key was ever emailed to me or included in the shipment. Three calls each to Apple and Microsoft have not solved this.

I ordered Microsoft Office 2011 with my Macbook Air, but only the trial version came installed - and no product key for the full version was ever emailed to me or included in the shipment. Three calls each to Apple and Microsoft have not solved this and I am at wit's end. Each company blames it on the other - I don't care whose fault it is, I just want the product key so I can use Microsoft Office! Please help.

You should have received a DVD in the box (with the MBA).
See: https://discussions.apple.com/message/12805337#12805337
Call AppleCare (they need to send you a DVD, which has the Product Key printed on the sleeve).

I have an academic version of Final Cut Studio on my laptop and recently purchased the most recent Full version of Final Cut Studio. Do I need to uninstall the academic version before installing the new version?

I have an academic version of Final Cut Studio on my laptop and recently purchased the most recent Full version of Final Cut Studio. Do I need to uninstall the academic version before installing the new version? I ask because this is not an upgrade, but a completely new version.

I'm with Jim on this. It always seems to work out better if you do not install over another version. You can use this app (freeware - thanks to Jon Chappel) to completely remove ALL Final Cut Studio apps and components: http://www.digitalrebellion.com/fcsremover/
Once that's done, install your newly purchased version.
-DH

Yesterday I worked on spreadsheets in the 3.0 version, today I open up numbers and it tells me I need to update. When I look in "about numbers" it tells me I have version 09...I went to the app store, it says the new version is installed on my Mac.

Yesterday I worked on spreadsheets in the 3.0 version, today I open up numbers and it tells me I need to update. When I look in "about numbers" it tells me I have version 09...I went to the app store, it says the new version is installed on my Mac.

Hi nuvest,
Numbers 3.0.1 lives in your Applications folder. Numbers '09 lives in a folder called iWork '09 within your Applications folder. You can drag each icon to your Dock. They will become Aliases. Right click (or control click) on each Alias in turn and Options > Keep in Dock. Then you can choose which one to launch.
Numbers '09 (Numbers 2.3) is on the left, three column chart. Numbers '13 (Numbers 3.0.1) is on the right, four column chart.
Both versions will run side-by-side. Just be sure which version has your document open before you save.
In Numbers 3.0.1 you can convert "backwards" to Numbers 2 with File> Export > Numbers '09...
Regards,
Ian.

Delete the latest version and install an old version

Need delete the latest version and install an old version of Firefox, my Norton toolbar does not respond

The fix being to do Norton liveupdate to update the Norton toolbar extension.
https://support.mozilla.org/en-US/questions/977740
Locked.

How can I have the latest version FF8 installed AND keep my old version until I get used to FF8 ?

I have also fopund that I have a Beta version FF 3.6 Beta 4
I have no idea how this was installed, as I have not done it knowingly and consciously !!!
It does not show up in ALL PROGRAMS from START.....
But does appear in ADD/REMOVE PROGS via Control Panel....also in MY COMPUTER>Program files !!
Both versions work...but my desktop short cut links to FF 3.6.24....and that is what I use all the time. (the Beta version must have been there for some time).....
So this gave me the idea of maybe keeping my current version and also having a separate program FF8.... Until I get used to FF8...(see question https://support.mozilla.com/en-US/questions/897193#answer-277745)
Maybe... 1. Install FF8 to a different location folder..say...Mozilla/Firefoxnew8
2. Rename the existing FF version and create new desktop short cut.
But the only problem I can see in these options is that when FF installs a new update automatically, on start up...... depending on which version I am using at the time...... I presume it will look for folder Mozilla/Firefox..... THEN WHAT WILL HAPPEN ??
Your comments would be Most Welcome and appreciated.

Do a custom install and install each version in its own program folder to use multiple Firefox versions.
* https://support.mozilla.com/kb/Custom+installation+of+Firefox+on+Windows
* https://support.mozilla.com/kb/Installing+a+previous+version+of+Firefox
Create a new profile exclusively for each Firefox version.<br />
Create a desktop shortcut with -P "profile" appended to the target to launch each Firefox version with its own profile.
See these mozillaZine KB articles for information:
* http://kb.mozillazine.org/Creating_a_new_Firefox_profile_on_Windows
* http://kb.mozillazine.org/Shortcut_to_a_specific_profile
* http://kb.mozillazine.org/Using_multiple_profiles_-_Firefox
* http://kb.mozillazine.org/Opening_a_new_instance_of_Firefox_with_another_profile
* http://kb.mozillazine.org/Testing_pre-release_versions
<br />
''(in reply of a PM)''

Cant get Frontrow to work after installing 10.4.3 and updating it

I made a terrible mistake today and moved all my files from my harddisk to my external harddisk. I had to reinstall everything but I cant get frontrow to work properly. I cant find it on my external harddisk either.
Can someone please help me with this tricky question.

Winbo:
Can you describe your problem in a bit more detail? Why did you decide to move your files? What files did you move? What method did you use to move them? Did you move them over completely by way of backing up and then erased your disk prior to moving them back?
Any other information you can provide will make it easier to make suggestions on your issue.
Good luck.
cornelius
PismoG4 550, 100GB 5400 Toshiba internal, 1 GB RAM; Pismo 500 OS X (10.4.5) Mac OS X (10.4.5) Beige G3 OS 8.6

I have a trial of LR 4.2, set to expire. The full version is installed but still opens as trial!

I have a trial version of LR 4.2. It is set to expire. I have purchased the full version & installed it. However, everytime I open the app, I get the trial version screen & have to re-enter my SN. I have a lot of work on the go with this app & do not want to lose it. I have also registered this product.
I have tried chat help, they direct me to phone support.
Phone support said wait time fop 18-25 mins...I have been on hold for almost 2 hours now! This is crazy... As a paying customer I would expect better support...

You might also try starting the program using "administrator" or "system" login privileges - and seeing if the serial number will "stick" that way, as a workaround (depending on the OS you are using).
Difficulty registering a license, often turns out to be a user rights issue in my experience. There are some license records buried in the system, inaccessible to the normal user login, which will persist regardless of uninstalling the software... which is how (for example) LR can prevent you from running further trial periods for a given version. Removing the software will not clear these records under any login, and there is no way to stop a new installation from referring to them if present. But with system privileges it should be possible to correct and update them to include your purchased license. This should then apply for all user logins.
Once you are up and running, you can maybe think about resolving the root cause at more leisure, ready for the future upgrade version. On Windows, that might be a registry permissions fix... but on MacOS, I don't have the faintest idea.

Is the lightroom installer broken ... I cant get the CC version to install

Similar Messages

Maybe you are looking for