Is there a BAdI to correctly calculate Confirmed Quantity in TLB Shipment?

Hi,
We added a new TLB parameter on top of currently existing weight, volume and floorpsots. Now, everything is working fine with the new parameter except for the "Confirmed Quantity (Dest.Loc.)" in the TLB shipment is not showing the total for all the relevant shipment items. The total is actually reflecting the "Confirmed Quantity (Dest.Loc.)" of the first line item in the order.
Is there a BAdI to correctly calculate the Confirmed Quantity in the shipment level?
I would really appreciate any help on this. Thank you in advance.
Arnel

Hi Arnel,
Please check the below BADis whether suits your requirements which are TLB based
/SCA/TLB_EXT     Transport Load Builder Extension
/SCA/TLB_PRFL_EXT     TLB Profile Extension
/SAPAPO/SDP_TLBORDER     Manipulation of Deployment Orders Before TLB
Please confirm
Regards
R. Senthil Mareeswaran.

Similar Messages

  • Zero confirmed quantity in sales order

    Hi Experts,
    In a sales order, there is a material for which confirmed quantity is zero in the schedule lines.
    I checked the stock in MMBE, there is around 46 qty in unrestricted.
    Still confirmed qty is zero. Order is not processed since many days.
    I cant figure out why this is happening.
    Am I missing something?
    Please guide.

    hello, friend.
    this means that product allocation is active in your system (QAS).  even if there are stocks existing, but the allocated quantity to your sold-to's order is limited or non-existing, then you cannot confirm sales order.
    you have several options:
    1.  increase the sold-to's allocated quantity, if the previous allocation has already been reached
    2.  if sold-to's allocation has still not been reached, and stocks have already been allocated to other sold-tos, increase overall stock availability (but this is easier said than done)
    3.  deactivate product allocation, re-run availability check (or re-enter items in order) to confirm quantities
    regards.

  • When I attempt to open a PDF file I saved from a website, I get the message "There was an error opening this document. The file is damaged and could not be repaired." Is there any way to correct this problem?

    When I attempt to open a PDF file I saved from a website using Safari, I get the message "There was an error opening this document. The file is damaged and could not be repaired." When I save the same PDF file using FireFox it opens up immediately. Is there any way to correct this problem with Safari?

    Back up all data.
    Triple-click the line of text below to select it, the copy the selected text to the Clipboard (command-C):
    /Library/Internet Plug-ins
    In the Finder, select
    Go ▹ Go to Folder
    from the menu bar, or press the key combination shift-command-G. Paste into the text box that opens (command-V), then press return.
    From the folder that opens, remove any items that have the letters “PDF” in the name. You may be prompted for your login password. Then quit and relaunch Safari, and test.
    The "Silverlight" web plugin distributed by Microsoft can also interfere with PDF display in Safari, so you may need to remove it as well, if it's present.
    If you still have the issue, repeat with this line:
    ~/Library/Internet Plug-ins
    If you don’t like the results of this procedure, restore the items from the backup you made before you started. Relaunch Safari again.

  • Error while trying to upgrade SQL 2008 (SP2) to SQL 2012: There was a failure to calculate the applicability of setting LICENSEPATH.

    Hi,
    I am trying to upgrade one of our SQL Server Enterprise (2008 (SP2)) to 2012. I am using the upgrade option but it gives me the following error:
    Error Code 0x85640002: There was a failure to calculate the applicability of setting LICENSEPATH
    We have downloaded the image from our Volume Licensing account. Also, the same image was used to install SQL 2012 on Windows Server 2012 R2 servers without any issues.
    Below is the install summary.txt. I have tried everywhere but no go. Would really appreciate any assistance.
    Overall summary:
      Final result:                  Failed: see details below
      Exit code (Decimal):           -2057043966
      Exit facility code:            1380
      Exit error code:               2
      Exit message:                  There was a failure to calculate the applicability of setting LICENSEPATH.
      Start time:                    2014-02-28 10:58:49
      End time:                      2014-02-28 10:58:58
      Requested action:              RunRules
      Exception help link:           http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.2100.60&EvtType=0x0BA02FC6%400x294A9FD9&EvtType=0x0BA02FC6%400x294A9FD9
    Machine Properties:
      Machine name:                  xxxxxxx
      Machine processor count:       2
      OS version:                    Windows Server 2008 R2
      OS service pack:               Service Pack 1
      OS region:                     U.A.E.
      OS language:                   English (United States)
      OS architecture:               x64
      Process architecture:          64 Bit
      OS clustered:                  No
    Package properties:
      Description:                   Microsoft SQL Server 2012
      ProductName:                   SQL Server 2012
      Type:                          RTM
      Version:                       11
      SPLevel:                       0
      Installation location:         D:\x64\setup\
      Installation edition:          
    User Input Settings:
      ACTION:                        RunRules
      CONFIGURATIONFILE:             
      ENU:                           true
      FEATURES:                      
      HELP:                          false
      INDICATEPROGRESS:              false
      INSTANCENAME:                  <empty>
      PID:                           *****
      QUIET:                         true
      QUIETSIMPLE:                   false
      RULES:                         GlobalRules
      UIMODE:                        Normal
      X86:                           false
      Configuration file:            C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20140228_105848\ConfigurationFile.ini
    Rules with failures:
    Global rules:
    There are no scenario-specific rules.
    Rules report file:               The rule result report file is not available.
    Exception summary:
    The following is an exception stack listing the exceptions in outermost to innermost order
    Inner exceptions are being indented
    Exception type: Microsoft.SqlServer.Chainer.Infrastructure.CalculateSettingApplicabilityException
        Message:
            There was a failure to calculate the applicability of setting LICENSEPATH.
        HResult : 0x85640002
            FacilityCode : 1380 (564)
            ErrorCode : 2 (0002)
        Data:
          SettingId = LICENSEPATH
          WatsonData = Microsoft.SqlServer.Chainer.Infrastructure.CalculateSettingApplicabilityException@2
          DisableWatson = true
        Stack:
            at Microsoft.SqlServer.Chainer.Infrastructure.Setting.CalculateApplicability()
            at Microsoft.SqlServer.Configuration.BootstrapExtension.ValidateChainerSettingAction.ExecuteAction(String actionId)
            at Microsoft.SqlServer.Chainer.Infrastructure.Action.Execute(String actionId, TextWriter errorStream)
            at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.ExecuteActionHelper(TextWriter statusStream, ISequencedAction actionToRun, ServiceContainer context)
        Inner exception type: Microsoft.SqlServer.Chainer.Infrastructure.CalculateSettingValueException
            Message:
                    There was a failure to calculate the default value of setting LICENSEPATH.
            HResult : 0x85640001
                    FacilityCode : 1380 (564)
                    ErrorCode : 1 (0001)
            Data:
              SettingId = LICENSEPATH
              WatsonData = Microsoft.SqlServer.Chainer.Infrastructure.CalculateSettingValueException@1
            Stack:
                    at Microsoft.SqlServer.Chainer.Infrastructure.Setting`1.CalculateValue()
                    at Microsoft.SqlServer.Deployment.PrioritizedPublishing.PublishingQueue.CallQueuedSubscriberDelegates()
                    at Microsoft.SqlServer.Deployment.PrioritizedPublishing.PublishingQueue.Publish(Publisher publisher)
                    at Microsoft.SqlServer.Chainer.Infrastructure.Setting.CalculateApplicability()
            Inner exception type: System.ArgumentException
                Message:
                            Culture ID 3072 (0x0C00) is not a supported culture.
                            Parameter name: culture
                Stack:
                            at System.Globalization.CultureInfo..ctor(Int32 culture, Boolean useUserOverride)
                            at System.Globalization.CultureTable.GetCultures(CultureTypes types)
                            at Microsoft.SqlServer.Configuration.SetupExtension.LcidUtilities.GetLangPackParentFolderForLcid(String lcid)
                            at Microsoft.SqlServer.Configuration.SetupExtension.LcidUtilities.GetLcidFolder(ServiceContainer context, String baseFolderFullPath)
                            at Microsoft.SqlServer.Configuration.SetupExtension.LicensePathSetting.DefaultValue()
                            at Microsoft.SqlServer.Deployment.PrioritizedPublishing.PublishingQueue.CallFunctionWhileAutosubscribing[T](SubscriberDelegate
    subscriberDelegate, Int32 priority, AutosubscribingFunctionDelegate`1 function)
                            at Microsoft.SqlServer.Chainer.Infrastructure.Setting`1.CalculateValue()
    Regards,
    Mohammed

    Culture ID 3072 (0x0C00) is not a supported culture.
                            Parameter name: culture
    This appears to be the root problem. It seems that the regional settings on this machine is messed up. 0x0C00 is an unusual LCID, they do not normally not end in two zeroes.
    is there a custom culture installed on this machine?
    Review the regional settings and also check the System locale. If it looks spooky, set it to Arabic - U.A.E. if this is where you are located.
    Erland Sommarskog, SQL Server MVP, [email protected]

  • My ipad2 no longer lists songs alphabetically, is there a way to correct this?

    My ipad2 no longer lists songs alphabetically.  If I know the name of a song, but not the artist...I can't find it,  is this a problem for others?  Is there a way to correct this?  If I look for a song that begins with an A....Adele pops up...Help?

    On the bottom of the screen, there are tabs, when you click on them, they order the music in Alphabetical order based on what is selected...If you click on Playlist and have playlists on your iPad, then they are going to be in the order that the music was added on the playlist when it was created and the music was added.  You want them in alphabetical order based on the name of the song...Click the "Songs" tab which has a musical note above it and the app will then sort the music in aplhabetical order...I have no issues with the music app in my iOS 7 and am able to get it to sort the music however needed by managing these tabs.

  • I just renewed my subscription to convert a Word document to a pdf.  Your sales department told me there was a hold up in confirming the purchase.  I need to do the conversion now.  In fact, if it had worked, I would be done now.

    I just renewed my subscription to convert a Word document to a pdf.  Your sales department told me there was a hold up in confirming the purchase.  I need to do the conversion now.  In fact, if it had worked, I would be done now.
    [private information removed by moderator]

    Hi bobbij,
    I'm sorry to hear there was a holdup with your order. Have you been able to access your subscription yet? If not, and you're on a time crunch, you could get the job down with Acrobat. You can download a free 30-day trial from http://www.adobe.com/products/acrobat.html.
    Best,
    Sara

  • Is there any standard variable to calculate previous and current month

    hi,
    Is there any standar variable to calculate previous month and current month which will calcualte from system date (sy-date). I found standard SAP Delivered variable - 0CMONTH to calculate current month. But i want both current month and previous month.  IF it is not avialble can you please provide me the ABAP code..
    thanks in advance.

    Hi,
    Check this thread.
    ABAP routine for loading previous months data in infopackage
    Regards.

  • Is there a BADi to control the results of SPL check on partner?

    Hi,
    When a customer / vendor master is transferred from ECC to GTS system, in some scenarios it is getting blocked.
    Is there a BADI available using which we can control this result, and keep a particular partner as unblocked?
    Thank you,
    KM

    Hello KM,
    what kind of scenarios do you mean?
    Are you using positive/negative lists?
    Cheers,
    Gabriel.

  • Is there a BADI to call custom defined fields in Project Systems (PS)

    Hi,
    Is there a BADI to call custom defined fields in Project Systems (PS)
    The business process is as under:
    SRM MDM product catalog is called from PS applcation in ECC using transaction code CJ20N.
    Standard fields like description, qty, price etc are displayed and transfered to the PS application.
    The requirement is in addition to above mentioned fields, need to display
    custom defined (CUST_FIELD1 to CUST_FIELD5) fields and subsequently to be transfered to the PS application.
    Pls provide help or inputs.
    Thanks,

    Hi,
    There is customizing in the PS side. PS -> Material-? *(OCI) -> Convert HTML to SAP Fields
    Regards,
    Masa

  • Unable to chage the status of normal correction to confirm successful test

    Hello,
    I am unable to chage the status of normal correction to confirm successful test in solman. Its shows error:
    Not all test transports are imported .
    I have imported the test trasnport in to test system successfully but still i am getting this error . I have also checked blogs in SDN but non of them refers to any solutions. But I can see lot of people have faced this issue.
    My configuration is fine and no error in application log.
    Can any body help me to find the resolution for this problem? answers will be rewarded.
    Regards,
    Bhavesh

    Hello Mark,
    Thanks for the update. But non of the above option can resolve m issue because :
    1) Note 1352886: is not relavent as I laready have the higher patch level of solution manager for ST comonant( SAPKITL431).
    2) I have already gone through this blog this blog talks about the status of maintenance cycle but in my case the maintenance cycle status is fine  (in developemnt without release) . So as per process till now i am on the correct status.
    I appreciate your updaes but still I am not able to change the status to consolidate. because of error Not all test transports have been imported.
    Please let me know if you have any other solutions for this error.
    Regards,
    Bhavesh

  • Bring back iphoto for ios8.  There is no native correction brush in photos

    For years I've been able to edit anything on my phone using iphoto, and now I find that ios8 diesn't even support it.  There is no native correction brush tool in The editing options of ios8.  None of the PS apps have it.  Any suggestions?
    This is a backwards move, Apple. 

    Apple is not here.
    These forums are users to users forums and we are not able to do anything about bringing anything back.
    If you wish to bring this to Apple's attention then post it at https://www.apple.com/feedback/

  • HT1937 my receiver volume (5s) is very low even when turned all the way up. is there a setting to correct?

    my receiver volume (5s) is very low even when turned all the way up. is there a setting to correct?

    Hello dreuer
    Try out some of the troubleshooting steps in the article below, it will go into checking Bluetooth connections as well as restarting your iPhone.
    iPhone: Receiver and call audio quality issues
    http://support.apple.com/kb/ts5196
    Regards,
    -Norm G.

  • My music library seems corrupted. Nearly every song (431 albums) displays "the song ... could not be used because the original file cannot be found". Is there any way to correct this? Please help, thanks, Kelly

    Almost my entire itunes music library seems corrupted. Nearly every song (431 albums) displys "the song ...  cannot be used because the original file cannot be found". Is there any way to correct this? Please help!
    thanks,
    kelly61

    Select one of the songs in question and right click, then select "Get Info". On the main dialog page you should see where iTunes thinks the file resides. Then use Windows Explorer to see if the file is actually there. If not, find out where your music is stored.If there is not a correlation between iTunes and reality, go into iTunes and delete all of the files which are not found.  Then, in iTunes, select File->Add Folder to Library and select where the music is stored. iTunes will re-add all of the music into your library.

  • I keep getting error 2503; 2502 when trying to install itunes in order to back-up my iphone; are there any downloads to correct this problem; any other help???

    I keep getting error 2502 and 2503 when trying to install itunes on my Win8 in order to back up my iphone; are there any downloads to correct this; any help????

    The issue seems to be with Windows 8/computer.  Try googling those error codes and see what result you get.
    I don't see any of those error codes in apple support page http://support.apple.com/kb/TS3694 http://support.apple.com/kb/TS1424

  • Is there a way to correct the pyramind effect caused by a UWA Lens in Lightroom?

    Is there a way to correct the slight inverted pyramid effect caused by a  17-40 when taking interior room shots in Lightroom or do I have to go  to PhotoShop to do this?  I have found the lens profile correction but  are there other tools in LR to use?
    What I am seeing is a slight outward shift from floor to ceiling on side walls and need to straighten these walls.
    Thanks

    Lee,
    Found those - thanks!  So, I really don't need to go to PhotoShop?
    Do I need to crop after adjusting the sliders - in my case, mostly the vertical slider?
    Also, can you say a little more about "Upright?"  And, if you know, will LR 5 be a charged-for upgrade to LR 4?
    Thanks again!

Maybe you are looking for