Is there a bug in AME CC 2014 re Queued items and headless premiere pro instances?

Hi,
Last night I had a render out of three sequences. All three sequences had the exact same first 7 minutes, and then a different final 4 minutes (internal corporate communication video). Output files were H.264 at 480p, 1.5mbps, VBR 2-pass, Source was a mix of AE dynamic linked compositions and dnxhd 720p.
Machine: Mac Pro (mid 2012) 3.2 Quad, 6Gb RAM (I know it needs more). ATI HD 5770 GPU.
First item took 3 hours, second item took 6 hours, third item took 9 hours. CPU wasn't taxed all the way at all. I know I need more RAM for this machine (in a corporate environment it isn't the easiest of things to get), however it should have been very similar render times for all three videos (the final four minutes are very similar in composition).
What I noticed in activity monitor was separate PProHeadless instances for each item queued, and they weren't shut down after the resulting item. Is this expected behaviour, and shouldn't it either use the same instance, or shut the instance down after the corresponding item completes?
Thoughts?

Yes, AME was working properly before. It seems to have happened after I installed the very latest update to AMECC14, however. I'm not sure if that's what did it in though.
This is what I'm seeing – "Presets" isn't even a folder, it is an alias file. Could that be my problem? Will AME re-create those files if I just erase all of the "8.0" folder's contents and re-launch AME? I'm confused, because I assumed uninstalling AMECC14 and doing a fresh re-install would do the trick, but maybe not.
Here are my Adobe folder permissions, Adobe Media Encoder folder's permissions, and the 8.0 folder's permissions. I am seeing Read & Write permissions for my username, but for "everyone" it says "Read Only" – could that be an issue as well?
Thanks so much for your help MMeguro!

Similar Messages

  • FAQ: How do I submit a bug report or feature request or otherwise give feedback about Premiere Pro?

    The best way to submit a bug report or feature request is to use the bug-report/feature-request form.
    The Premiere Pro team doesn’t  necessarily see and record every post on every forum and social network, but we do see, record, and track every entry  through the the official feature-request/bug-report form.
    It also helps a lot if you opt into the Product Improvement Program.
    Also, be sure to use the crash reporter.
    We really do read all of the bug reports and feature  requests, and the software really does get a lot of benefit from  detailed crash reports.
    Don’t forget about contacting Adobe Technical Support or Customer  Service, too. For information on how to contact Adobe Technical Support,  see this page. (Note that you must register your product before you can open a technical support case for it.)
    If you have tried to get help from our support staff, but the service  was inadequate, I can help you to escalate your issue if you send me  your case number at kopriva at adobe dot com. You must provide me  a case number. I am not offering to solve your problem myself; rather, I  am willing to forward your information to someone if you have already  hit a dead end with our Technical Support or Customer Service.
    If you have feedback about the content of the Premiere Pro Help document,  then please add a comment at the bottom of the relevant page. You can  add comments to add information, to add links, to make corrections, or  to ask for clarification.
    If you want to keep up with the Premiere Pro team, then you can follow our blogs, Facebook page, and Twitter feed and so on.
    Oh, and I can’t resist this opportunity to remind you to update to  the most recent version of the application. Don’t be surprised when the  first thing that you hear back from us is that you need to install the  latest updates. We fix a lot of things in updates, and we don’t want to go chasing bugs that we’ve already fixed. We’ll keep you posted on our blogs, Facebook page, and Twitter feed about updates as they become available.

    Hi qwerty,
    Dun tink that creative customer support sucks cos I had been dealing with them in the past and I can say that their service are quite gd and fast. If you wanted a refund, I tink you need to contact the store that sells you the product. Dun tink creative will refund you though.

  • Is there an easier way to work with adobe after effects and final cut pro x

    I use adobe after effects and I am thinking about deleting motion and compressor ( I can always install again). If you have a good reason to keep those apps let me know because I don't want to be hasty. If I delete them and stick with after effects and final cut pro...  Is there a secret to easy working between FCPX and adobe after effects?
    Thanks

    You'll go from FCP X to and from Motion a lot easier than AE.  Motion does pretty much anything AE does, most of the time faster and easier.  Without Motion, you can't do custom templates.  You can't customize the encoding of files without Compressor.  Why would you want to remove them from your system?  Leave them, use AE if you want along side of them.  But I'd learn Motion first.  Cause AE doesn't read FCPXML, so going back and forth between them is a PITA.
    And until Apple releases the round trip between FCP X and Motion fully, we have this gem:
    http://www.alexnking.com/2012/02/20/fcpx-send-to-motion-app/

  • I am the only who's 2014.1 Update is failing for Premiere Pro and Photoshop??

    I just went to update my Adobe CC Photoshop and Premiere Pro to 2014.1 and I get a failed message on both to retry. Dynamiclinkmanager or something for Premiere and im not sure the other error for other. Is this happening to anyone else??

    Hi Espience Films,
    We can certainly try to help you with the situation, please provide the below mentioned details so that we can assist you appropriately.
    OS version:
    Specific Error:
    Screenshot if possible:
    Thanks,
    Atul Saini

  • Flicker footage in Premiere Pro CC 2014.2. Tested on different computers. When waiting for fixes this bug?

    Flicker appears solely the fault of Premiere Pro CC 2014.2. Tested on different computers. Used as nVidia Quadro and GeForce GTX770. Drivers were different. Everywhere equally evident flicker. Incidentally, it defies logic and may occur at different film pieces. If re-render that flicker may occur on another spot in the video.
    It can occur even in the parts without filters !!! But no all time.
    ver 2014.2 - win 7 - intel i7-4770 - gtx 770 - flicker!
    ver 2014.2 - win 7 - intel i7-4770 - Intel HD Graphics 4600 - flicker!
    ver 2014.2 - win 7 - intel i7-2700K - quadro 2000 - flicker!
    MERCURY PLAYBACK ENGINE work fine! But still flickering in preview and render.
    When waiting for fixes this bug?

    Hi Aleksey,
    Flicker appears solely the fault of Premiere Pro CC 2014.2. Tested on different computers. Used as nVidia Quadro and GeForce GTX770. Drivers were different.
    Have you tried with the Mercury Playback Engine set to "Software Only?" More info please: FAQ: What information should I provide when asking a question on this forum?
    Everywhere equally evident flicker. Incidentally, it defies logic and may occur at different film pieces. If re-render that flicker may occur on another spot in the video.
    Is this a brand new project or one you updated from an earlier version? What kind of footage are you exporting? Which preset are you using?
    When waiting for fixes this bug?
    If I can repeat the case here with the same hardware, GPU, and drivers, that would be easier to fix the bug. Currently, I cannot recreate the bug.  If you or anyone else can provide me with steps to recreate the bug, that would help immensely. It sounds like this will be the difficult thing.
    Thanks,
    Kevin

  • Numbers Sort function. In Numbers 09 there was 'rearrange' which worked perfectly. New Numbers 13 has Sort by column but I can't get it to work. is there a bug?

    In Numbers 09 there was 'rearrange' which worked perfectly. New Numbers 13 has Sort by column but I can't get it to work. is there a bug?

    Numbers '09 has a Reorganize panel and the top section of that panel is for sorting. Numbers 3 also has the ability to sort and it works.  However, Numbers '09 and Numbers 3 sort differently.
    In Numbers '09, if you had a formula such as =Table 1::A1 and if a sort of Table 1 moved cell A1 to A20, the formula would change to =Table 1::A20. In Numbers 3, the formula would stay =Table1::A1.

  • AE CC 2014 と AME CC 2014 の連携についての不具合?

    After Effects CC 2014 (AE) で作成したコンポジションを、一度Media Encoder CC (AME) でレンダリングします。
    後にAEのプロジェクトファイル内容を変更し、名前を変えて保存します。その際、コンポジション名は変更しません。
    また同じようにAMEでレンダリングするのですが、レンダリングの結果が、変更前の内容で、変更が反映されません。
    例えば
    A.aep
     └compo1
    という構造のプロジェクトがあるとして、
    "compo1"をレンダリングして書き出したものが compo1.mp4 だとします。
    A.aepのcompo1に変更を加え
    A_01.aep
     └compo1
    という構造で保存します。その際コンポジションの名前は変更しません。
    ここでまた、"compo1"をレンダリングすると、本来変更が反映された compo1.mp4’ 
    が書き出されるはずなのですが、変更が反映されず1回目に書き出したものと全く同じ compo1.mp4
    が書き出されます。
    A_AME\compo1.mp4 と A_01_AME\compo1.mp4 の内容が全く同じになるという現象です。
    ファイル名を変えてもコンポジション名を変えないと、何かキャッシュのようなものの関係で
    レンダリング結果は反映されないのでしょうか?
    環境は
    Windows7 Pro 64bit SP1
    Intel Core i7-4770 CPU @ 3.40GHz 3.40GHz
    16.0GB RAM
    AfterEffects CC 2014
    Media Encoder CC 2014
    宜しくお願い致します。

    この文書の現象に似ているのでしょうか?
    Changes to After Effects compositions inside Premiere Pro projects are not reflected when exports are queued in Adobe Me…
    こちらはPremiere Pro にDynamic linkで読み込ませてからAdobe Media Encoderにキューで送信した場合に反映しないというものですが。。。
    Uncheck native sequence import in Adobe Media Encoder's Preferences:
    Preferences>General>Premiere Pro>Import sequences natively
    こっちとか、試してみてどうなのでしょうか?Dynamic linkの動作を変更するので、期待してみただけです。外したらすみません。

  • Premiere Pro CC 2014 and Medie Encoder CC 2014 problem

    Hello there,
    Every time that I am willing to export my project my Premiere Pro CC 2014 stop responding all together. I tried the short cut (Commend+M) or going through the Manu bar. the result is the same, Premiere Pro CC 2014 just freezes and does not respond to anything till I force quit it and restart it allover again. I tried exporting from Premiere Pro it self, without using Media Encoder, but the problem remains the same.
    I am using the new Mac Pro. I heard Adobe Premiere Pro is experiencing  problems with the New Mac Pro. Is that true? Or is there other issue?
    Thank you and looking forward to hear back,
    Maruf

    I am having a similar problem.
    Premiere Pro CC 2014 suddenly decided to crash every time I export to either Adobe Media Encoder or within Premiere itself.
    The encode will usually go for 5-10 minutes before the programs either spits out a "serious error has occurred" window, or it just sits there frozen until I force quit.
    I did find a work-around for the moment. If I open AME and FILE > OPEN, select my project and then the sequence I want, AND put it in Software render mode, it will work.
    My timeline is 2K, 58 minutes in 23.976
    Only effects applied are Lumetri LUTs - no third party.
    I've exported as recently as a week ago without issue.
    Running OSX 9.5 on an X99 board
    3.75 GHz 8-core
    64GB 2400 MHz RAM
    EVGA Titan Black 6GB
    Because I can get my renders out, I am not too concerned. Either there is something wonky with my timeline that screws with any graphics enabled rendering, or there is a bug that is have the same effect. I will try rendering on another of my edit bays that utilizes a GTX 580 that I KNOW works. The Titan is pretty new to my workflow.
    Thanks Adobe, for checking this out.

  • Premiere Pro CC 2014.2 often crashes (Windows)

    Hi...i'm on windows 8.1 and using premiere pro cc 2014.2.... there have been bugs and really need help as this problem has affected my workflow and i even can't get a solution of this.....
    1. There are times my files will be offline and have to reconnect them one by one....and sometimes i have to restart the software or computer to reconnect them back....there are also times when i reconnect them and get a "files are corrupted" error but they can be opened in redcine x...
    2. I also get error when trying to reconnect audio files stating a "header error....
    3. If i mark in and out and try to copy paste from one sequence to another, the computer will not respond and freeze....
    I'm using a asus g750jm, i7 2.4ghz, with 24gb of ram.....
    The sequence that i use to edit these red raw files are just 1024x540....
    Need serious help here...thank you...

    Hi Nazim,
    You´re not alone! It looks like the whole world of Mac users crashes when inside Premiere Pro CC 2014.
    I´ve tried back peddling to early version (8.0) same problem.
    So this is for Kevin (who probably will tell me to stay with the Mac-probelm-users-thread):
    Here is my latest crash report (out of hundred):
    Process:               Adobe Premiere Pro CC 2014 [717]
    Path:                  /Applications/Adobe Premiere Pro CC 2014/Adobe Premiere Pro CC 2014.app/Contents/MacOS/Adobe Premiere Pro CC 2014
    Identifier:            com.adobe.AdobePremierePro
    Version:               8.0.0 (8.0.0)
    Code Type:             X86-64 (Native)
    Parent Process:        ??? [1]
    Responsible:           Adobe Premiere Pro CC 2014 [717]
    User ID:               501
    Date/Time:             2015-04-03 14:55:56.729 +0900
    OS Version:            Mac OS X 10.10.2 (14C1514)
    Report Version:        11
    Anonymous UUID:        3C4BE865-15A1-83C0-2A8F-247384EECB0D
    Time Awake Since Boot: 19000 seconds
    Crashed Thread:        0  Dispatch queue: com.apple.main-thread
    Exception Type:        EXC_BAD_ACCESS (SIGSEGV)
    Exception Codes:       KERN_INVALID_ADDRESS at 0x00000000000000c0
    VM Regions Near 0xc0:
    -->
        __TEXT                 0000000100000000-0000000100003000 [   12K] r-x/rwx SM=COW  /Applications/Adobe Premiere Pro CC 2014/Adobe Premiere Pro CC 2014.app/Contents/MacOS/Adobe Premiere Pro CC 2014
    Thread 0 Crashed:: Dispatch queue: com.apple.main-thread
    0   com.apple.CoreText             0x00007fff8c98db95 TLine::~TLine() + 243
    1   com.apple.CoreFoundation       0x00007fff9105ca9e CFRelease + 526
    2   com.apple.HIToolbox           0x00007fff8d5a0944 TCoreTextLineInfo::~TCoreTextLineInfo() + 34
    3   com.apple.HIToolbox           0x00007fff8d5a0913 TLayoutInfo::Clear() + 51
    4   com.apple.HIToolbox           0x00007fff8d5a078f TCoreTextEngine::Invalidate() + 49
    5   com.apple.HIToolbox           0x00007fff8d59d0a8 TCoreTextEngine::Init(void const*, THIThemeTextInfo const*) + 92
    6   com.apple.HIToolbox           0x00007fff8d59cf00 TThemeTextCache::Create(void const*, THIThemeTextInfo const*) + 460
    7   com.apple.HIToolbox           0x00007fff8d59c8bf DataEngine::GetTextDimensions(void const*, double, HIThemeTextInfo*, double*, double*, double*) + 259
    8   com.apple.HIToolbox           0x00007fff8d59c785 HIThemeGetTextDimensions + 185
    9   com.apple.HIToolbox           0x00007fff8d5e124e HIStandardMenuView::MeasureItemTextWidth(__CFString const*, TextLayout*, __CTFont const*) + 122
    10  com.apple.HIToolbox           0x00007fff8d5e0a3f HIStandardMenuView::GetItemWidth(float, TextLayout*, unsigned char*) + 719
    11  com.apple.HIToolbox           0x00007fff8d5dde02 HIStandardMenuView::GetOptimalSizeSelf(CGSize*, float*) + 878
    12  com.apple.HIToolbox           0x00007fff8d5dda1c HIView::SendGetOptimalBounds(CGRect*, float*, CGSize*) + 416
    13  com.apple.HIToolbox           0x00007fff8d5dd84f HIView::GetOptimalSize(CGSize*, float*, CGSize*) + 45
    14  com.apple.HIToolbox           0x00007fff8d5dd755 HandleCalculateMenuSize(OpaqueEventRef*) + 154
    15  com.apple.HIToolbox           0x00007fff8d58213a MenuData::EventHandler(OpaqueEventHandlerCallRef*, OpaqueEventRef*, void*) + 358
    16  com.apple.HIToolbox           0x00007fff8d58098c DispatchEventToHandlers(EventTargetRec*, OpaqueEventRef*, HandlerCallRec*) + 1260
    17  com.apple.HIToolbox           0x00007fff8d57fdce SendEventToEventTargetInternal(OpaqueEventRef*, OpaqueEventTargetRef*, HandlerCallRec*) + 386
    18  com.apple.HIToolbox           0x00007fff8d57fc42 SendEventToEventTargetWithOptions + 43
    19  com.apple.HIToolbox           0x00007fff8d5dd4e4 _CalcMenuSizeOnDevice(MenuData*, unsigned short, unsigned int, CGRect const*, unsigned int) + 763
    20  com.apple.HIToolbox           0x00007fff8d5e1bad GetInitialMenuRect(MenuSelectData*, MenuData*, unsigned char, Point, unsigned short, Rect*, unsigned int*, CGPoint*) + 261
    21  com.apple.HIToolbox           0x00007fff8d5f6f32 GetCurrentMenuRect(MenuSelectData*, unsigned int*, CGPoint*) + 110
    22  com.apple.HIToolbox           0x00007fff8d605890 DrawTheMenu(MenuSelectData*, __CFArray**, unsigned char, unsigned char*) + 582
    23  com.apple.HIToolbox           0x00007fff8d60548c MenuChanged(MenuSelectData*, unsigned char, unsigned char) + 356
    24  com.apple.HIToolbox           0x00007fff8d5f1e36 TrackMenuCommon(MenuSelectData&, unsigned char*) + 1211
    25  com.apple.HIToolbox           0x00007fff8d604fb1 MenuSelectCore(MenuData*, Point, double, unsigned int, OpaqueMenuRef**, unsigned short*) + 510
    26  com.apple.HIToolbox           0x00007fff8d604c5e _HandleMenuSelection2 + 446
    27  com.apple.AppKit               0x00007fff9191b8be _NSHandleCarbonMenuEvent + 277
    28  com.apple.AppKit               0x00007fff917b72f0 _DPSNextEvent + 1843
    29  com.apple.AppKit               0x00007fff917b6730 -[NSApplication nextEventMatchingMask:untilDate:inMode:dequeue:] + 194
    30  com.apple.AppKit               0x00007fff917aa593 -[NSApplication run] + 594
    31  com.adobe.Frontend.framework   0x00000001000c948d FE::MacApplication::RunSelf() + 45
    32  com.adobe.Frontend.framework   0x0000000100047cca FE::Application::Run(std::basic_string<unsigned short, std::char_traits<unsigned short>, dvacore::utility::SmallBlockAllocator::STLAllocator<unsigned short> > const&) + 4058
    33  com.adobe.Frontend.framework   0x00000001000cad44 FE::AppMain(ASL::ObjectPtr<ASL::Module, ASL::AtomicValue> const&, std::basic_string<unsigned short, std::char_traits<unsigned short>, dvacore::utility::SmallBlockAllocator::STLAllocator<unsigned short> > const&, int, void*) + 276
    34  com.adobe.Frontend.framework   0x00000001000d1f25 FE::Run(ASL::ObjectPtr<ASL::Module, ASL::AtomicValue> const&, std::basic_string<unsigned short, std::char_traits<unsigned short>, dvacore::utility::SmallBlockAllocator::STLAllocator<unsigned short> > const&, int) + 581
    35  com.adobe.AdobePremierePro     0x00000001000018ac main + 508
    36  com.adobe.AdobePremierePro     0x00000001000016a4 start + 52

  • Huge Bugs with Many Legs Still Living in Premiere Pro - (Border from Sharpening & Flickering from Adjustment Layer)

    I haven't edited video in awhile.  While working on a new project I've run into a bunch of what I suppose are well known issues in Premiere Pro CC 2014.  It seems Adobe has know about these issues for some time, but that for some reason, nothing is being done about them.  Here is my most recent experience with editing a video using PP:
    1. Found that color correction tools in Premiere Pro for setting White Balance Suck for folks who don't edit video 8 hours a day.
    Searched on web to find solution find that Adobe has no fix but random humans have found hack solution: White Balance in Premiere Pro CC on Vimeo
    The dude shows you how to use the Cyroce Color Neutralizer plugin from After Effects - but sure enough the current version of the plugin that ships with AE CC 2014 doesn't work with premiere any more so you have to download the old version from dude's website here:  http://www.sternfx.com/tutorials/136
    Thanks to the DUDE!
    2. Found out that adding an Adjustment layer can cause flickering in footage.
    Searched on web to find solution find that Adobe has no fix but random humans have found hack solution: PP CC 2014 - adjustment layers flickering problem : Adobe Premiere Pro  AND  Re: image flickering from adjustment layer
    Added mask to control flickering.  More specifically, I turned each effect in the adjustment layer on and off until I found the particular effect that was causing the flickering.  Then I created a mask in that effect which covered the entire frame.  Mystically the flickering disappeared.  Learned that if you make any changes to adjustment layer effects, flickering will return and you have to delete/recreate the mask once again. Ridiculous.
    3. Thought all was good and that I could now peacefully continue to finish my project.  I was wrong.  Found that adding sharpening in adjustment layer causes a small border to form around the entire frame.  The pixels seem faded or translucent or something.
    Searched on web to find solution find that Adobe has no fix but random humans have found hack solution:  Sharpening bug Premiere Pro - - Fourmedia
    So now I've learned that the sharpening effect needs to go on it's own adjustment layer.  Awesome.
    Flickering returns because I made a change to adjustment layer 1.  Re-mask.  Sweet.
    That's it.  Pretty sure this post will help folks out, but man I am going to run out and give another NLE a shot.  None of these operations should be this difficult.  Makes me wonder if Adobe even attempts to use their own programs.  I don't see how anyone could possibly let a huge tool like Premiere Pro suffer from these issues -- and for so long a period of time.  Absolutely ridiculous.  Adobe truly seems to be asleep at the wheel.  This is some amateur crap here.

    Thanks for this post. It would be cool (since Adobe doesn't seem to use their products) if there were more posts like this that I could read before I upgrade. I'm having the flickering w adjustment layer problem you mentioned in #2 - and this post is over month old! Aghh

  • Adobe Premiere Pro CC not opening an xml file created in Adobe Premiere Pro CC 2014

    Hello,
    I had created a project using Adobe Premiere CC 2014 which had some minor changes, which were going to be done by my boss, who uses Premiere Pro CC. However the project file of Adobe Premiere CC 2014 was not getting opened in Premiere Pro CC giving a message of type that as this file was created in a newer version of Premiere, it cannot be opened. After searching on this forum I found that we have to convert the Premiere Pro CC 2014 project file to XML file which can be then imported onto Premiere CC. So I created a XML file by selecting File-> Export -> Final Cut Pro XML and sent it to my boss. However even the xml file is not getting opened after being imported onto Premiere Pro CC giving an error of sorts, Cannot open the file since there is a problem with the codecs.
    Have I done something wrong? Please guide me since I am a beginner to the Adobe environment and would very much appreciate any help.
    Thank you.

    Indeed..... but are they fully documented, includuing Adobe's implementation of Multicam?  
    Collapsing them should really be no more than a day or two of work for an Adobe engineer and a day of beta testing.  Seriously.  Lots of people want this - it only takes a few minutes with google to find people struggling with this exact problem.   Premiere Pro Multicam --> Resolve.
    Since we do a lot of multicam work it's something that's important to us.
    Lots of other people never go near multicam, so I guess for them it's something they really don't care about.
    I currently have > 22 hours of multicam sequences that need primary colour correction and follow on grading..... resolve would be the best choice by far. 

  • Premiere Pro CC 2014 keeps crashing on startup.

    So, I just had a fresh Windows 7 install because for the last 3 days I've been having a problem with Premiere Pro CC 2014 and this was my last resort, even so, it didn't work.
    Everytime I try to start Premiere Pro CC 2014 this happens:
    I know this has been a problem to a lot of people, but I've tried every solution I've seen so far: tried the Premiere Pro CC version, reinstalled Premiere Pro CC 2014, updated Intel Graphic card, disabled Intel Graphic card, renamed Adobe's AppData folder, tried running in compability mode, reinstalled Quicktime, unistalled Quicktime. And I just formatted my computer, so I really don't know what else can I do.
    I'm running Windows 7 Ultimate with a Intel Core i3-4330 CPU @ 3.50GHz, Sapphire Radeon R7 260x, 8GB RAM.
    My Event Viewer logs:
    "Faulting application name: Adobe QT32 Server.exe, version: 8.0.1.21, time stamp: 0x53c7afcc Faulting module name: ImageRenderer.dll, version: 8.0.1.21, time stamp: 0x53c76485 Exception code: 0xc000001d Fault offset: 0x001e5353 Faulting process id: 0x114c Faulting application start time: 0x01cfbfc08ce68291 Faulting application path: C:\Program Files\Adobe\Adobe Premiere Pro CC 2014\32\Adobe QT32 Server.exe Faulting module path: C:\Program Files\Adobe\Adobe Premiere Pro CC 2014\32\ImageRenderer.dll Report Id: cb4f1cdb-2bb3-11e4-82a4-97822361737e"
    "Windows cannot access the file  for one of the following reasons: there is a problem with the network connection, the disk that the file is stored on, or the storage drivers installed on this computer; or the disk is missing. Windows closed the program Adobe QT32 Server CC 2014.0 because of this error.
    Program: Adobe QT32 Server CC 2014.0" "Faulting application name: Adobe Premiere Pro.exe, version: 8.0.1.21, time stamp: 0x53c7b17f Faulting module name: ImageRenderer.dll, version: 8.0.1.21, time stamp: 0x53c7659e Exception code: 0xc000001d Fault offset: 0x00000000001f5382 Faulting process id: 0xc70 Faulting application start time: 0x01cfbfc086d5619d Faulting application path: C:\Program Files\Adobe\Adobe Premiere Pro CC 2014\Adobe Premiere Pro.exe Faulting module path: C:\Program Files\Adobe\Adobe Premiere Pro CC 2014\ImageRenderer.dll Report Id: cb4a3ac9-2bb3-11e4-82a4-97822361737e"
    "Windows cannot access the file  for one of the following reasons: there is a problem with the network connection, the disk that the file is stored on, or the storage drivers installed on this computer; or the disk is missing. Windows closed the program Adobe Premiere Pro CC 2014.0 because of this error. Program: Adobe Premiere Pro CC 2014.0"
    Thank you.

    Hi zerebelo,
    Please install Windows 7 Serivce Pack 1 and that should fix it.
    Let me know if that helped.
    Thanks!!!
    Rameez

  • BUG? "ERR-1002 Unable to find item ID..." on branch on upgrading 3.0 to 4.0

    I'm testing the waters prior to upgrading a customer application from APEX 3.0.0.00.20 to 4.0.2.00.07.
    The application has been exported from the APEX 3.0 environment on a 4.0 instance on a different server. Both databases are 10.2.0.4.0 EE.
    A on navigating&mdash;via a standard tab&mdash;to a page containing only conditional On Load: Before Header branches, the branches are failing with
    Unexpected error, unable to find item name at application or page level.
    Error: ERR-1002 Unable to find item ID for item "p810_status" in application "121". This is caused by the branch action having Set these items item names specified in lower case:
    p810_status,p810_read_onlyThe error is resolved by changing these item names to UPPER CASE.
    This is not a disaster. Using APEX views I can see that there are only a handful of branches specifying item names in lower case so it won't require major effort to fix this app when it's upgraded for real.
    However, (a) I am aware that there are other places in this app where item names are specified in lower case; and (b) I tend to type most of my development stuff in lower case, so I'd like clarification on this issue.
    <li>Is this a known issue? (Can't find any earlier mention of this on OTN, MOS or web)
    <li>Is this expected behaviour in APEX 4.x or a bug?
    <li>If a bug is it fixed in 4.1?
    <li>Is there a change in APEX 4.0 requiring branch item (and other?) references to be uppercase? If so, where is this documented?
    I notice that it works OK when the same item values are specified in the URL using lowercase item names.
    Bumped by: fac586 on 08-Mar-2012 15:51
    I noticed that APEX 4.0.2 has converted all branches to use the [now] late, lamented "Set value before branching" option. Is this significant? Obviously this won't occur if upgrading to 4.1.
    Edited by: fac586 on 12-Mar-2012 15:14

    Hi Lukx,
    Thank you for reporting this. You have hit upon an issue with this page, for which I have filed Oracle bug #11840642. To get around this in the meantime, you can see page specific changes by going to:
    1) The 'Page Definition' page for the page you want to see recent edits.
    2) Go to 'Utilities > History'. This will show you recent actions for components on the current page.
    Hope that helps and thanks again for catching this.
    Regards,
    Anthony.

  • Editing Red Dragon Raw 6k Footage with Premiere CC and/or CC 2014 - Which is better and what issues should I expect?

    Hi All
    As the title asks;
    1. Are there any known issues when Editing Red Dragon raw 6k footage in Premiere Pro CC/CC14 ?
    2. Which version of the software would be the best choice ? CC/CC 2014 (I have both)
    This is my first Red Dragon 6k Project in premiere CC software and although I have used CC extensively since its release  I am working with a tight turnaround so making sure I have as much info as possible to troubleshoot. (if needed)
    This question is directly related to the software and any known issues.  It is not hardware related as we are setup for that side of things with very fast SSD -> Thunderbolt storage and powerful machines.
    Any info or experiences would be greatly appreciated
    Thanks
    Piers

    Hi Piers - did you ever get an answer or figure out a good workflow for editing 6K in premiere?
    If so, i'd appreciate you sharing what you've learned.
    Thanks!

  • Exporting from Premiere Pro CC 2014

    Hello there,
    Every time that I am willing to export my project my Premiere Pro CC 2014 stop responding all together. I tried the short cut (Commend+M) or going through the Manu bar. the result is the same, Premiere Pro CC 2014 just freezes and does not respond to anything till I force quit it and restart it allover again. I tried exporting from Premiere Pro it self, without using Media Encoder, but the problem remains the same.
    I am using the new Mac Pro. I heard Adobe Premiere Pro is experiencing  problems with the New Mac Pro. Is that true? Or is there other issue?
    Thank you and looking forward to hear back,
    Maruf

    Hi Maruf,
    Maruf Noyoft wrote:
    Kevin,
    I reset as you suggested and it took care of it.
    Great!
    Maruf Noyoft wrote:
    So, if you don't mind explaining me the cause of the problem that I had? Or
    an article about it. It is just for me for getting to know better the program and the system.
    Thank you very much and appreciate your help enormously.
    Since preference files get touched by the application frequently, there is always the possibility of their corruption. When this happens, you start to see what we call "unexpected behaviors" from Premiere Pro. This problem happens infrequently, but it is a good first troubleshooting step to try on your own. This is the case with most every non-linear editing application I have used over the years (Final Cut Pro, Avid, Media 100, etc.).
    Thanks,
    Kevin

Maybe you are looking for

  • Replacing 9. with 8.2.1

    I finally got a bit fed up with the problems on iTunes 9 and reinstalled 8.2.1 in a frenzy, without thinking about playlists & purchased lists etc. Does anyone know of a way to access the playlists from the newer version of iTunes into the older vers

  • Order Document Flow Broken

    Howdy,            We have some orders which have been completely invoiced but the document flow still stays - "Being processed" (VBUK-GBSTK = 'B', we are not able to close the order. Can't use correction report SDVBUK00 as the overall status on the d

  • [SOLVED] "back in time" and crond problem

    I'm looking into using "back in time" as a backup tool. For testing, I've created a simple daily rule - just to see how it goes. crontab entry (created by BIT) is : @daily nice -n 19 /usr/bin/backintime --backup-job >/dev/null 2>&1 No backup is run.

  • I can't access my mail,contact,calendars settings on my iPhone after update . i press the icon in setting and it just goes back to home screen.

    i can't access my mail,contact,calendars settings on my iPhone after update . i press the icon in setting and it just goes back to home screen.

  • Doubts in Contract Hierarchies!

    Hi Guys..How are you? I'm a doubt in Contract Hierarchies. I need help.. For example: if I set the indicator in customizing to activate this function (Contract Hierarchies). Can I cancel this configuration in the future? Once activated this configura