Is there a Data Execution Prevention compatable version of iTunes?  I have reinstalled iTunes 10.5 at least 10 times, and after it installs, it will not open because of DEP.

I have tried all the advice I have seen on Apple Support discussion boards for the past 2 days, and nothing works.  Disabling DEP is not possible, regardless of what the Windows Support discussions tell you.  In the meantime, I have absolutely no access to iTunes, or even the ability to update my iPhone or iPod.  The only feasable solution is the possibility of a version of iTunes that is compatable with Data Execution Prevention settings. 
In the past 2 days, I have:  Removed iTunes and related components from the Control Panel (numerous times)  Per the instructions on Apple Service discussions pages, I did it in this order.  1. iTunes  2. QuickTime  3. Apple Software Update  4. Apple Mobile Device Support 5. Bonjour ^. Apple Application Support.  After all that, I reinstalled iTunes. 
Everything looks fine during installation, with no error messages.  At the end, it says everything was successfully installed.  However, when the installation tool closes, iTunes will only partially open a window, but will stay blank.  Then I get the message that iTunes has stopped working and that Windows has shut it down.  Then I get notified that DEP has caused iTunes to shut down. 
Can someone please help?  Or, is there a DEP compatible version of iTunes? 
I would appreciate any help.  Thanks!!

Polydorus,
Thank you for your kind reply.  During the many times I uninstalled iTunes, and all the other Apple programs, I only used the Uninstall Programs in Windows Control Panel.  To make a long story short, I found a solution that works for me, but it is still not a complete soluton.
Here is what I did:
I used Uninstall Program in the Windows Control Panel to uninstall everything IN THIS ORDER
1. iTunes
2. QuickTime
3. Apple Software Update
4. Apple Mobile Device Support
5. Bonjour
6. Apple Application Support
Then I went to C:\Program Files and looked for any iTunes or Apple program listed there and deleted it.
I have 64-bit, so I then went to C:\Program files (x86) and looked for any iTunes, QuickTime, Bonjour or any other file or folder that had Apple or any Apple program in the name and deleted it.
I went to C:\Windows|SysWOW64\Quicktime  and C:\Windows\SysWOW64\QuicktimeVR and deleted them
Go back to START, and open the "C" drive.  Open the USERS folder.  Open the folder with your username.  Open the AppData folder.  Then double-click on the LOCAL folder to open it.  If you see any files or folders there that show any Apple program or file, delete those files or folders.  Then go to the REMOTE folder and do the same.  If there are any other users on this computer, go to each individual user and do the same thing in each LOCAL and REMOTE folder.  Restart your computer.
Go to http://www.apple.com/itunes/download/ This is the page where you will actually download iTunes.  Scroll down the page to the section under "Windows Software"  that says "64-bit editions of Windows Vista or Windows 7 require the iTunes 64-bit installer".  Click on that line to get the installer.  It will take you to another download window.
Scroll to the bottom of the page to the message that says "Download for iTunes 10.4.1 for Windows (64-bit) here: iTunes for Windows 64-bit."  Click there to get the download.
This is not iTunes 10.5, so you will not have access to "The Cloud", but it is at least functional until Apple actually comes out with a version that will not activate the DEP message.  There was no combination of uninstalling and reinstalling, with or without Quicktime, with 10.5 that did not cause problems with Data Execution Prevention problems that I found.
I also used Firefox for the downloading instead of Internet Explorer.  It just seemed to function better that way.
I hope this is helpful to someone.  It's just what worked for me.   

Similar Messages

  • I have a 1st generation MacBook Pro and I recently downloaded OS X Maverick.  My iTunes will not open because it says i need a 64 bit version.  Already followed the promted instructions but no luck.  Any suggestions??

    I have a 1st generation MacBook Pro and I recently downloaded OS X Maverick.  My iTunes will not open because it says i need a 64 bit version.  Already followed the promted instructions but no luck.  Any suggestions??

    Oh, you do have the C2D! That's great!
    I'm no technical expert, I just like to help out whenever or wherever I can so... I don't know if this can help you, but let me tell you about how I got my Snow Leopard to run in 64 bit mode. When I got my (late 2008) iMac it was running in 32 bit mode under Tiger (2.4 GHz/Core 2 Duo). I eventually upgraded to Snow Leopard & it was running in 32 bit mode (by default) w/1 GB RAM.  
    Somewhere along the line, I happened to watch a YouTube Video that showed how to upgrade an iMac's RAM, so I ordered two - 2GB sticks of Crucial RAM and then - under the guidance of the 14 or 15 year-old young man who posted the video on YouTube; wearing a rather fashionable static-electricity-neutralizer-wrist-strap, I removed 1GB of RAM & plugged in the 4GBs of RAM. So - boom like that, it was like I bought a brand new machine.
    It was over a year later when I stumbled across a way to boot Snow Leopard into 64 bit mode. Turns out that if you boot while holding down the 6 & 4 key combo (the ones above the QWERTY keys), then the machine runs in 64 bit mode. Go figure. Now my Snow Leopard and just about all of my applications - with the ironic exception of iTunes - runs in 64 bit. iTunes seems fine though; if there's a performance bottleneck, I really can't tell.
    Well, that's about it..
    I hope that something I've mentioned can help you achieve your overall goal.
    Finally, it's hard to jump onto a train, a large cat, or a surfboard that's already moving. But don't be surprised when someone a fraction of your age shows you how to.
    Best Regards,
    mm~

  • I have uninstalled and reinstalled and Firefox for windows 7 will not open. There is no error message--it just doesn't open, even in safe mode. What do I do?

    My computer is set to auto update for Windows 7 Home Premium and for Microsoft Office Professional Plus 2010. I am also running Norton 360. There was a major update for Office on 12/10/14 that seems to be when my problems started. This month, every time my updates have caused a reboot, Mozilla has failed to open. I have uninstalled it and reinstalled it several times, and it has only lasted a day or two before it crashes again. This last time it will still not open. All the instructions to troubleshoot seem to be based on the idea that the program is open and just has issues. I can't even get it to open up in Safe Mode.
    I have tried to reinstall, and it says that it will launch automatically when the install is complete, but it is not working. Since Norton scans every download before it runs, I'm not certain if that is where the problem is since I never get the window that shows the step by step installer for Firefox.
    What do I need to do?

    Certain Firefox problems can be solved by performing a ''Clean reinstall''. This means you remove Firefox program files and then reinstall Firefox. A clean reinstall is not the same as a regular reinstall performed using the built in installer. Please follow these steps:
    '''Note:''' You might want to print these steps or view them in another browser.
    #Download the latest Desktop version of Firefox from [https://www.mozilla.org mozilla.org] (or choose the download for your operating system and language from [https://www.mozilla.org/firefox/all/ this page]) and save the setup file to your computer.
    #After the download finishes, close all Firefox windows (or open the Firefox menu [[Image:New Fx Menu]] and click the close button [[Image:Close 29]]).
    #Delete the Firefox installation folder, which is located in one of these locations, by default:
    #*'''Windows:'''
    #**C:\Program Files\Mozilla Firefox
    #**C:\Program Files (x86)\Mozilla Firefox
    #Now, go ahead and reinstall Firefox:
    ##Double-click the downloaded installation file and go through the steps of the installation wizard.
    ##Once the wizard is finished, choose to directly open Firefox after clicking the Finish button.
    More information about reinstalling Firefox can be found [[Troubleshoot and diagnose Firefox problems#w_5-reinstall-firefox|here]].
    <b>WARNING:</b> Do not use a third party uninstaller as part of this process. Doing so could permanently delete your [[Profiles|Firefox profile]] data, including but not limited to, extensions, cache, cookies, bookmarks, personal settings and saved passwords. <u>These cannot be easily recovered unless they have been backed up to an external device!</u> See [[Back up and restore information in Firefox profiles]]. <!-- Starting in Firefox 31, the Firefox uninstaller no longer lets you remove user profile data.Ref: Bug 432017 and https://support.mozilla.org/kb/uninstall-firefox-from-your-computer/discuss/5279 [Fx31] Windows uninstaller will no longer offer the option to remove personal data -->
    Please report back to say if this helped you!
    Thank you.

  • I get an error message when I sync my iPhone 5 with itunes on a Windows 7 laptop. When I go back to my music there are exclamation marks next to many songs. I have reinstalled iTunes

    I get an error message when I sync my iPhone 5 with iTunes on my Windows 7 Samsung laptop.  I recently backed up all of my data using Samsung Recovery Solution 5 to an external hard drive so that I could restore my laptop.  I put all of my data back on the restored laptop and reinstalled iTunes. After the error message that says that certain items could not be found and the "sync" is finished I go back to my music in iTunes and there are exclamation marks next to many songs.  I follow some instructions regarding the Edit - Preferences - Advanced settings and the exclamation marks go away until I try to sync my phone again.  Then I get the same error message and the exclamation marks return.  I have uninstalled and reinstalled iTunes and the same thing happens again.  I am about to schedule an appointment with the Genius Bar but would like to avoid that if possible.  Thank you in advance for any help. 

    Hello Courtney,
    Thank you for the details of the issue you are experiencing when syncing your music to your iPhone.  It sounds like iTunes is not able to locate the original file for the song to transfer it to your device.  I recommend reviewing the following articles to locate you music files on your computer:
    iTunes: Finding lost media and downloads
    http://support.apple.com/kb/ts1408
    Where are my iTunes files located?
    http://support.apple.com/kb/ht1391
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • Need to recover old playlists, old iTunes library will not open because it was created by a newer version?

    I have a Mac mini, have installed iTunes on it and want to find some old playlists that were lost.  I have several 'iTunes Libraries' with different dates but I cannot open any of them becauseit says they were created with a newer version of iTunes.  Please help!

    Somewhere in your process you ended up with an earlier version of iTunes than was used last with the library. iTunes 10.6.3 is the highest version that will run under OSX 10.5.8
    iTunes 10.6.3.25 - http://support.apple.com/kb/DL1575
    If you had an earlier version and still want that version I am not sure how to go about this.  My iTunes library file does not say it was created with a particular version, although I admit I have not looked at the .xml copy to see if it is buried in the file itself.  Apple only has a very limited number of iTunes versions openly posted, though you can still find just about any version if you look in the right places.  You would have to kind of start low and work your way up to where you want to be since once you open a library with a version it cannot be reverted to an earlier version (make backups first).

  • ITunes will not open because library was created by newer version???

    I am still using iTunes 9.2.1 and am not ready to go with v10.
    I tried to open iTunes and got the message:
    The file "iTunes Library" cannot be read because it was created by a newer version of iTunes.
    I did notice that the last time I opened it, it looked a little different but went on with a sync of my 1st.gen AppleTV and then closed out.
    I have not downloaded and upgraded to the newer version 10.
    I have never had higher than 9.2.1 so I couldn't help but wonder if in some way I am being forced to go the newer v10.
    Harold

    I have discovered this:
    I could not open iTunes as I previously stated in the normal method.
    However, it will open when I created a quicktime movie from iMovies and prepared it for iTunes. When I click on the quicktime movie to play it will open iTunes to play the movie. That is when I see the different icons, etc.
    I had something called ‘Ping’ to disable because I care nothing about that.
    It does not look the same as I am use to with 9.2.1.
    I went to the file menu> about> and low and behold it comes up ITUNES 10.
    Remember, I have not downloaded ver.10 at any point so it must have come through a back door somehow.
    So, I looked in my applications to see if iTunes app has changed. No, it still shows 9.2.1. I did a search in spotlight for iTunes 10 and nothing shows up. Go figure!
    I am not a happy camper at this time and need to hear from Apple about this.
    I am not ready to go to v10 and want an explanation.
    I am not ready to go with v10 because I wanted to see how it effects my 1st. gen. AppleTV.
    I don’t want to loose all the downloads I have on a device that I really like.
    The new AppleTV has no hard drive and thus stores nothing as I understand it.
    I have many TV programs purchased and stored from the History, Travel and Natl. Geographic, etc. channels.
    Harold

  • Firefox will not open because "error:platform version 1.9.2.13 is not compatable with min version =1.9.2.12 or maxVersion =1.9.2.12 " is in a window when I open Firefox

    It started a year ago when I opened Firefox I got an error message, so I removed firefox & re-installed it. Still no go! So I opened "C" drive & searched for anything "firefox" & found a 2002 version!! I deleted everything, restart, & installed firefox and what I get now is what you see above.
    OS is XPpro, sp3 + many updates.

    Do a clean (re)install:
    * Download a fresh Firefox copy and save the file to the desktop.
    * http://www.mozilla.com/firefox/all.html
    * Uninstall your current Firefox version and remove the Firefox program folder before installing that copy of the Firefox installer.
    * Don't remove personal data if you uninstall the current version.
    * It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
    Your bookmarks and other profile data are stored elsewhere (not in the Firefox program folder) and won't be affected by a reinstall, but make sure that you do not select to remove personal data if you uninstall Firefox.

  • Iphoto was updated on 12/13/13 but now it says it will not open because I need to download the latest version, but there is no update.

    I updated Iphoto on 12/13/13. Now when I try to open it, I just get a message that says "The library iphoto library cannot be opened. To open it, you must upgrade to the latest version of Iphoto." But I have no updates for iphoto.

    deanongbottom wrote:
    I am yet another with this problem
    Same problem - exact same informatin needed to be able to assist
    LN

  • I have a full version of photoshop on my mac but downloaded a master collection trial, now photoshop will not open because the trial expired.

    I had a full version of CS6 photoshop on my macbook and then downloaded a Masters Collection trial a few months ago.  Photoshop has been working fine until today when I tried to go on, it told me that my trial was over.  I had the full version on my computer before I downloaded the masters collection so I thought it would still work.  Is there a way I can fix this or am I out of luck?  I really don't want to have to buy another version of photoshop again.  (I also have Bridge on my computer too from before downloading the trial and that is still functioning just fine) 

    Try using the Adobe Creative Suite Cleaner Tool to remove the Suite and then reinstall the standalone Photoshop
    Adobe Creative Suite Cleaner Tool
    helps resolve installation problems for CS3 thru CS6 and for Creative Cloud
    http://www.adobe.com/support/contact/cscleanertool.html

  • Will not open because it was created by a newer version?

    I haven't changed anything on my computer and now all of a sudden when I try to open itunes it says "the file "i Tunes Library.itl" cannot be read because it was created by a newer version of i Tunes. Please help me, thanks

    I have the same problem. Nothing has changed. I can;t update I can only quit. Is there a way to re-load iphoto

  • My iTunes library will not open because it was created with a newer version

    When I try to open iTunes I get the following error message.
    "The file iTunes.itl cannot be read because it was cretaed by a newer version of iTunes.
    This happened after I downloaded version 7 in September. I can see that my library is intact but cannot get it to open. Any suggestions?
    Thanks
    Greg

    Update it seems to be version 6.05 which is showing up when I check via my Computer.
    i've seen this happen every now and then if an install doesn't go through properly ... the library files get updated, but the program files don't get touched.
    let's try another itunes 7.0.2.16 install. we'll take a few additional explicit precautions this time.
    download and save a fresh copy of the itunes installer to your hard drive. (we'll run the install from there rather than online.) switch off antivirus and antispyware applications prior to the install.
    iTunes 7.0.2.16 Installer
    if that install goes through properly, does itunes launch for you again?

  • ITunes will not open because it's on a locked disk or there are missing write permissions

    After moving files back to a new hard drive from an external, a warning message comes up saying that either the folder is on a locked disk or I don't have write permissions for the folder whenever I try to open it. How do I fix this?

    I have the same problem since I upgraded, I have given all the correct permission to the folders and files, but get that message. Can anyone help?

  • "Data Execution Prevention" prevents Reader 9.0 & 9.1 from running

    When I try running Adobe Reader 9.0 or 9.1, the Windos "Data Execution Prevention" feature prevents it from running. I just received a new DELL computer with Vista Home Premium OS with Adobe 9.0 already installed. When I run the Adobe Reader, it stops executing because it is using a part of memory reserved for system files. Windows states that "Data Execution Prevention" has stopped the program to prevent possible corruption. I downloaded version 9.1 and still have the same problem. I downloaded the "light" version of Version 9.1 and still have the same problem. If I try running from Firefox or from the Desktop icon, I still have the same problem. When I try from the Control Panel to set Data Execution Prevention to exempt Adobe Reader, I get a message that Adobe Reader needs to run under DEP and cannot be exempted. So, I can't run Adober Reader 9.1 becasue Windows "Data Execution Prevention" stops it. Can anyone help? Thanks.

    I have a user experiencing the same problem.  Opening the program itself (not by executing a pdf file) end up crashing Adobe immediately.  Initiating Adobe Reader from a PDF file, it appears to crash during "Initializing DigSig(2).api".  As other users have noted in other threads pertaining to this problem, Data Execution Prevention pops up a message basically telling the user that the program was blocked and to make an exception.  When I try to do this for AcroRd32.exe, DEP complains that the program must run with DEP enabled and it cannot be turned off for this program. I've installed Foxit Reader as a temporary work-around, but we have a lot of industry-specific programs that rely heavily on Acrobat Reader and I fear it may have a much more far-reaching problem since Adobe Acrobat Reader 9 is dead-in-the-water.  Anyone have any thoughts on this?  Is Adobe/MS working on a solution?
    Windows Vista Home Premium SP2 64-bit
    Internet Explorer 7
    Acrobat Reader 9.2.0.124
    I've tried uninstalling, then reinstalling as normal and no joy.  I downloaded the "lite" and stand-alone installer from the ftp site, still crashes Reader.  The error as reported by the Event Viewer:
    Log Name: Application
    Source: Application Error
    Date: 11/10/2009 1:32:24 PM
    Event ID: 1000
    Task Category: (100)
    Level: Error
    Keywords: Classic
    User: N/A
    Computer: David-PC
    Description:
    Faulting application AcroRd32.exe, version 9.2.0.124, time stamp 0x4ac7307c, faulting module unknown, version 0.0.0.0, time stamp 0x00000000, exception code 0xc0000005, fault offset 0x00000001, process id 0x1044, application start time 0x01ca6244e7a078e6.

  • Something called Data Execution Prevention shuts Reader down when I try to print.

    I've had this problem with Reader X & Reader 9. I'm running Vista oc and whenever I try print a pdf a message comes up that says Adobe Reader has stoped working correctly and is being shut down by windows. Then another message appears saying that Adobe Reader was shut down by Data Execution Prevention in order to protect the computer from damage. I tried to remove Adobe Reader from the list of programs turned on for DEP and got a message stating that Adobe Reader has to run with DEP and DEP cannot be turned off for it. Anyone know how to work around this?

    I have the same issue with Adobe Reader X and Windows Vista Home Premium.
      Could someone please post information on this issue??
    Here are some typical crash reports:
    Problem signature
    Problem Event Name:    BEX
    Application Name:    AcroRd32.exe
    Application Version:    10.0.1.434
    Application Timestamp:    4d456f48
    Fault Module Name:    StackHash_fd00
    Fault Module Version:    0.0.0.0
    Fault Module Timestamp:    00000000
    Exception Offset:    04148fc7
    Exception Code:    c0000005
    Exception Data:    00000008
    OS Version:    6.0.6002.2.2.0.768.3
    Locale ID:    1033
    Additional Information 1:    fd00
    Additional Information 2:    ea6f5fe8924aaa756324d57f87834160
    Additional Information 3:    fd00
    Additional Information 4:    ea6f5fe8924aaa756324d57f87834160
    Extra information about the problem
    Bucket ID:    1715808607
    Problem signature
    Problem Event Name:    BEX
    Application Name:    AcroRd32.exe
    Application Version:    10.0.1.434
    Application Timestamp:    4d456f48
    Fault Module Name:    StackHash_fd00
    Fault Module Version:    0.0.0.0
    Fault Module Timestamp:    00000000
    Exception Offset:    03fd8fc7
    Exception Code:    c0000005
    Exception Data:    00000008
    OS Version:    6.0.6002.2.2.0.768.3
    Locale ID:    1033
    Additional Information 1:    fd00
    Additional Information 2:    ea6f5fe8924aaa756324d57f87834160
    Additional Information 3:    fd00
    Additional Information 4:    ea6f5fe8924aaa756324d57f87834160
    Problem signature
    Problem Event Name:    BEX
    Application Name:    AcroRd32.exe
    Application Version:    10.0.1.434
    Application Timestamp:    4d456f48
    Fault Module Name:    StackHash_fd00
    Fault Module Version:    0.0.0.0
    Fault Module Timestamp:    00000000
    Exception Offset:    040c8fc7
    Exception Code:    c0000005
    Exception Data:    00000008
    OS Version:    6.0.6002.2.2.0.768.3
    Locale ID:    1033
    Additional Information 1:    fd00
    Additional Information 2:    ea6f5fe8924aaa756324d57f87834160
    Additional Information 3:    fd00
    Additional Information 4:    ea6f5fe8924aaa756324d57f87834160
    Problem signature
    Problem Event Name:    BEX
    Application Name:    AcroRd32.exe
    Application Version:    10.0.1.434
    Application Timestamp:    4d456f48
    Fault Module Name:    StackHash_fd00
    Fault Module Version:    0.0.0.0
    Fault Module Timestamp:    00000000
    Exception Offset:    04348fc7
    Exception Code:    c0000005
    Exception Data:    00000008
    OS Version:    6.0.6002.2.2.0.768.3
    Locale ID:    1033
    Additional Information 1:    fd00
    Additional Information 2:    ea6f5fe8924aaa756324d57f87834160
    Additional Information 3:    fd00
    Additional Information 4:    ea6f5fe8924aaa756324d57f87834160
    Extra information about the problem
    Bucket ID:    1714833369

  • TS1277 my itunes wont open beacause of a Data Execution Prevention harming my pc

    My itunes wont open because of a Data Execution Prevention harming my PC. What can i do?

    I had the same issue after my recent update of iTunes.  I didn't update Quicktime 'cuz I don't use it much (or at all).  On another thread discussing the same issue, I saw that the Quicktime installation can affect iTunes.  So I downloaded the latest Quicktime, installed, redooted - issue fixed (for now). 

Maybe you are looking for

  • New MacBook, old hard drive and unsynced iPhone.

    Here's the situation. Old MacBook pro died (logic board gave up). I've removed the hard drive and bought an enclosure so that I can plug it in via USB to my new MacBook pro. I am NOT a fan of Migration Assistant. I'm discouraged by the thought of cop

  • Switch from Windows 7 32-bit to Windows 7 64-bit

    I have just received my X201 tablet from a Lenovo reseller with Win 7 32-bit installed. The system has 2GB of RAM, but I have another 2GB stick that I want to insert and would like to upgrade to Win 7 64-bit in order to utilize all of it. I don't wan

  • User Name and Password for JCO RFC call to BAPI

    Hi all, What I think I know: --We do NOT have Single Sign On configured so don't tell me to use SSO please - I agree, but... --We have a requirement to do a goods receipt which prints labels for the handling units  .....The printer to which the label

  • CS 3 - design view unavailable

    I have "inherited" a site and when I open the pages in Dreamweaver CS3, I cannot see anything in Design View. All the code is there in Code View, and the site works. Does anyone have a solution for this?

  • Winamp m3u playlists imported into iTunes are empty

    I've switched from Winamp (PC) to iTunes 9 for Mac. I'd like to import my old playlists, which are in m3u format. I select Library > Import Playlist, navigate to the desired playlist, and iTunes adds it, but when I click on it in iTunes there are no