Is there a Driver for Dymo Discpainter?

Hi everyone,
I upgraded to 10.7 a while ago but hadn't used my Dymo DiscPainter to sadly see now there is no driver for 10.7. Please tell me there is something I can do to utilize this great printer again. I have a Mac Pro 1st Gen and an MacBook Pro I got last Dec (2011). Both are running OS 10.7.
Thanks so much for any help.

Hi,
I afraid you will not be able to use the scanner with Windows 8.1, it is not compatible with the OS.
Regarding VueScan, I afraid it would not be an option as well, the application only support your scanners if there are drivers for the OS:
If there isn't an HP scanner driver at www.hp.com for your operating system, then unfortunately VueScan won't work with this scanner.
You may try using the Vista drivers by running the drivers using the Program Compatibility Troubleshooter as listed below.. select Not Listed from the programs list and browse to the installation file for Vista:
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&dlc=en&docname=c03401961&lc=en#N63
The installation file for Vista can be downloaded below:
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=sj-47405-1&cc=us&dlc=en&lc=en&...
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Similar Messages

Is there a driver for iR-ADV C5235 compatible with MacOS 10.10 Yosemite?

Hello,
Is there a driver for iR-ADV C5235 compatible with MacOS 10.10 Yosemite? Is it possible to reinstall the driver from an older version?
Best,
Christophe

This forum is focused on consumer level products. For the Designjet you may have better results posting in the HP DesignJet forum here, that is where the DesignJet experts can be found.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Is there a driver for the thunderbolt ethernet adapter on a 2010 Macbook Air?

The thunderbolt ethernet adapter is not being recognized on my 2010 Macbook Air running 10.6.8. Is there a driver for it?

That's because there's no thunderbolt port on the 2010 MBair. You need to buy the USB ethernet adapter.
http://store.apple.com/us/product/MC704ZM/A

Is there a driver for Windows 8.1 that works with HP Scanjet 5500c

Is there a driver for Windows 8.1 that works with HP Scanjet 5500c
Thank you.

Hi,
I afraid you will not be able to use the scanner with Windows 8.1, it is not compatible with the OS.
Regarding VueScan, I afraid it would not be an option as well, the application only support your scanners if there are drivers for the OS:
If there isn't an HP scanner driver at www.hp.com for your operating system, then unfortunately VueScan won't work with this scanner.
You may try using the Vista drivers by running the drivers using the Program Compatibility Troubleshooter as listed below.. select Not Listed from the programs list and browse to the installation file for Vista:
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&dlc=en&docname=c03401961&lc=en#N63
The installation file for Vista can be downloaded below:
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=sj-47405-1&cc=us&dlc=en&lc=en&...
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

I have a macbook pro. I want to print to a Dell photoprinter 720. Is there a driver for my mac that will let me use my printer?

I have a macbook pro. I want to print to a Dell photoprinter 720. Is there a driver for my mac that will let me use my printer?

Dell only provide some rather old Windows drivers for this model, no Mac drivers at all.
Plug it in, you may get lucky but frankly I doubt it.

HT1338 is there a driver for Lexmark X1100 Series All-in-one?

Is there a driver for Lexmark X1100 Series All-in-One ?

Hi,
Might try this...
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-53118-1 &lc=en&cc=us&dlc=en&product=1146331&os=219&lang=en

Is there a driver for the apple genuine dvi to composite adapter to make it work on Maverick OS?

Im having a problem with a few parts to it but the main problem is my Apple Genuine DVI to Composite is no being recognized correctly. & not allowing me to mirror or multiple screen or anything. It wont even broadcast a signal to the secondary screen or anything. This all started when I upgraded to Maverick OS. I'm pretty sure apple has a driver for this problem. Can anybody point me to where I can find it?
Thanks in advance!

Hi there djshotgunn,
There is not a specific driver that you would need to download outside of Software Update. I would recommend taking a look at the troubleshooting steps in the article below if you are experiencing video issues with an external monitor.
Apple computers: Troubleshooting issues with video on internal or external displays
http://support.apple.com/kb/ht1573
Many common display issues can be resolved easily by making sure the software on your Apple computer and the firmware on your video adapter, display and Thunderbolt cabling is up to date. Check for updates for Apple products by using Software Update, the Mac App Store, or visiting Apple downloads. Check with the manufacturer for any updates that may be available for displays, extenders, or adapters not made by Apple.
-Griff W.

Is there a driver for the HP W2371d for osx 10.7.5?

Is there any way I can use the HP W2371d monitor on my MacBook Pro running OSX 10.7.5?

On first reading, I thought you needed a driver for an HP Printer.
The Mac does not use special Drivers for ANY display. It uses one Driver that is heavily parameterized.
Your display must be connected properly and include the pins for the Data Side Channel. At Startup, the Mac sends a query to the Display asking "what is your name and what are your capabilities?" Driver parameters are adjusted automatically in response to that query -- no additional downloads are needed or are useful.
The proper procedure is:
Plug it in.
if your Mac does not immediately recognize it, use the (Detect displays) button.
If it does not work post back with your exact model of MacBook, what version of Mac OSX[ 10.7.5], what display card you are using if you have separate display cards, what port you are attempting to connect {Mini DVI, DVI, Mini DisplayPort/ThunderBolt} , and what cables and adapters you are using.

Is there a driver for Samsung CLX-3170 that works with OS 10.9.4 ?

Since I installed Mavericks my Samsung CLX-3170 Colour laser printer does not work properly. Is there a new driver for this ? I had a long chat with Samusng help desk that was totally inconclusive. Trying to re-install the printer I was told that there is no driver currently available. HELP !

You can try looking on these 2 sites for a driver.
Gimp - Print
HPIJS for Mac OS X

Is there a driver for windows 7 64 bit for faxphone L80.?

is there a win 7 64 bit driver for faxphone L80?

Hello rickr,
No, unfortunately a Windows 7 x64 driver is not available. We apologize for the inconvenience this may cause.
Please contact us to find out about other options that may be available to you.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

Is there a driver for the PXI-8310 that works with Windows 7?

The only one I can seem to find is for XP.

Hello LouisTI,
Unfortunately there is not a Windows 7 driver for the PXI-Cardbus8310, as this is a legacy device which is currently going EOL (End of Life). The XP driver for the 8310 (which you may already have found) can be downloaded here:
http://joule.ni.com/nidu/cds/view/p/id/370/lang/en
If using Win 7 is critical, we recommend the PXI-ExpressCard 8360 as a replacement for the 8310:
http://sine.ni.com/nips/cds/view/p/lang/en/nid/202294
Hope that helps!
James M. | Applications Engineer | National Instruments
James M. | Applications Engineer | National Instruments

Is there a driver for Epson WF 7525

Hi everybody,
could you tell me if there is a driver for Epson WF 7525 (iMac & OS Mavericks).
Epson company told me, they wont write a new driver for this printer.
Thanks for your Help

Thanks John,
I Had seen this page but my old drivers, utilities, applications ans so on, installed with Epson printer dvd dont work any more.
So I manually writed the "printer network name" through "system preferences" under "printer network" and this way is ok.
Now i must go to "system preferences" in order to use my multifunction printer and scanner.
Thanks again.

Is there a driver for lifecam studio camnera?

I got a Microsoft full 1080 HD camera. Can I used it my macmini? Is there a driver?

if the camera connects via USB, this driver may work for you.

Is there any driver for Epson CX5600 and Leopard?

Hi All,
Just looking for Epson CX5600 drivers for Leopard (printer and scanner)
I've tried to install Tiger's driver and does not work.
Any Idea?
Epson have a nice Leopard Support site (http://www.epson.com/leopard), but there is nothing about CX 5600. Ths is one of the most selled printer on Latin America.
Hope someone can help me! Thanks!
Pablo

I´ve received this message from Epson Support.
Thank you for contacting the Epson Connection.
At this time there is no Macintosh OS X 10.5 driver for your Epson product.
Check our Macintosh OS X 10.5 compatibility webpage at
www.epson.com/leopard for updates, as we continue to update drivers.
If your product is not listed there, it is not supported on Macintosh OS X
10.5.
If you require further assistance with this particular issue, please ensure
all of our previous correspondence is contained in your reply, so we can
better track the history of this issue.
If you have a different issue, please submit another E-form via our website
(http://www.epson.com), and we will respond in a timely manner. Thank you
again for contacting Epson.
Red G.
Epson Connection
So... i must wait...
I've tried the default Epson Drivers from Leopard DVD, and they don't work.

Is there DAQ driver for MAC or Linux

I know for Labview there is version for Mac or Linux.
Just want to learn if there is DAQ driver for MAC or Linux, which can support USB DAQ.
Thanks.
Solved!
Go to Solution.

Hi Alex,
Lynn is correct. For using NI's USB DAQ hardware with Mac and Linux, the best and only driver to use is NI-DAQmx Base. The readme file lists what specific devices are supported, which specific Linux and OS X versions are supported, and which hardware features are supported.
[1] NI-DAQmx Base 3.4 for Linux
http://joule.ni.com/nidu/cds/view/p/id/2128/lang/en
[2] NI-DAQmx Base 3.4 for Mac OS X
http://joule.ni.com/nidu/cds/view/p/id/2127/lang/en
Joe Friedchicken
NI VirtualBench Application Software
Get with your fellow hardware users :: [ NI's VirtualBench User Group ]
Get with your fellow OS users :: [ NI's Linux User Group ] [ NI's OS X User Group ]
Get with your fellow developers :: [ NI's DAQmx Base User Group ] [ NI's DDK User Group ]
Senior Software Engineer :: Multifunction Instruments Applications Group
Software Engineer :: Measurements RLP Group (until Mar 2014)
Applications Engineer :: High Speed Product Group (until Sep 2008)

Is there a Driver for Dymo Discpainter?

Similar Messages

Maybe you are looking for