Is there a Go To function in Numbers?

I really like the function in AppleWorks‘ to be able to link to other parts of a document. I don’t see anything like this in Numbers unless I am missing it. Can anyone prove me wrong?

No, but...
There are a couple of techniques you can use to get to a row near the one you want or to a cell in the immediate neighborhood.
Place a single cell table near the row you want to go to on your large table. Give it a name that indicates where it is. Drag it to a location near that row. Clicking the new table's icon in the Sheets List will bring it to the front and into view. from there, it should be a short hop to where you want to be. (Technique suggested some time ago by Jerry.)
"Find" + "Jump to" can be used to jump to a cell determined by its contents. You can define the content of selected cells or of one or more columns to be unique within the table (or to have the same content, and be located in handy places throughout the table).
• Use command-F to open the Find pane. Type the identifier into the search field, then select the correct location from the list in the pane and press command-J to jump to the selected cell.
With the second technique, you'll get a single item list if the identifier is unique within the table, or a list of all cells containing the identifier if it's in more than one cell.
Regards,
Barry

Similar Messages

  • There is no filter function in numbers for ipad,its very discouraging,as a ipad fan,even nokia lumia providing filter in there low cost mobile

    there is no filter function in numbers for ipad,its very discouraging,as a ipad fan,even nokia lumia providing filter function in excel in there low cost mobile.
    APPLE KINDLY PROVIDE THIS FEATURE AS UPDATE SOON,COZ I WORK ON EXCEL N NUMBERS IN MY IPAD IS DEAD WITH OUT FILTER FUNCTION,I CAN NOT TRAVEL WITH MY IPAD DUE TO THIS REASON,AS I HAVE TO BE IN FIELD WITH SALES FORCE SO I BOUGHT IPAD.

    Probably you know that the new version of Numbers for iOS uses the filters created in the Numbers for Mac version.
    It's not the best solution but it helps (of course, if you have a Mac!)

  • Is there a 1/x function in Numbers?

    Is there a 1/x function in Numbers?

    Bengoshi26 wrote:
    Thanks. How would I construct a formula that contains a relative cell divided by an absolute cell. This yields a number like 102% or 97%, which I'd rather have displayed as 2% or (negative) 3%?
    What I'm trying to do is track values that change periodically divided by a basis (which is absolute).
    I'd appreciate your thoughts.
    I read this as 'I want to display the percent change from the base amount.'
    With the base amount in B1 and the changed values in the rest of column B, place the formula below in column C, starting with C2, then Filling down.
    =(B-$B$1)/$B$1
    Format the target cells as Percent, with and many digits as you want of decimal precision.
    Regards,
    Barry

  • Is there a descriptive statistics function?

    Is there a "descriptive statistics" function foundin numbers like there is in excel?

    Hi Ann,
    Do you mean this? (bottom left of your Numbers window when you have selected some cells)
    Ian.

  • Is there a equivalent of "Data Validation" function in Numbers?

    Hi, I think this question have been asked before in 2009. But there's no conclusive answer. I just imported a medium complexity xlsx sheet into Numbers, "data validation have been removed data retained" message appeared. Is there a equivalent function in Numbers? Or can we construct one? The reason this is important is when using the Macs we are ok and less likely to "fat finger" the data entry. However with a iPad and especially the iPhone, we are more likely to "fat finger" the data entry and therefore a scroll wheel or drop-down list function will help.
    If anyone has a helpful answer that will be great!
    Ken
    ===

    "Data Validation" as such is not supported in Numbers.
    Numbers '09 does support two means of restricting data choices to a pre-determined list of choices:
    Pop-up menu is a cell format that provides a pop-up list of choices from which a value may be selected. Value not on the menu cannot be inserted (except by changing the cell's format, then entering the values manually).
    Slider and Stepper are two more cell formats. Both provide a mechanism for inserting numeric values, with the minimum, maximum and increment values set in the cell format inspector.
    The numeric values set by the Slider or Stepper can be used, in a separate cell, to lookup a text value from a table of possible values.
    The Numbers for iOS feature set is a subset of the one available in Numbers '09. I don't know if Pop-up menus, Sliders or Steppers are supported in the iOS version,
    Regards,
    Barry

  • Is there any built in function that prints numbers in words inXMLP

    Hi Team,
    This is regarding SR#3-7005716301 from Syntel Limited.
    Customer is asking Is there any built in function that prints numbers in words in an rtf teamplate using xml publisher?
    For example if the net amount is 100 dollars then it should print "ONE HUNDRED DOLLARS AND ZERO CENTS ONLY"
    Thanks in advance!
    Leo

    I do not know of any function available that lets you print the currency words (dollars, cents etc). Here is a link to a blog post that will allow you to print numbers in words.
    https://blogs.oracle.com/xmlpublisher/entry/numbers_to_words_update
    Thanks,
    Bipuser

  • Is there a way to view image numbers in iPad photos, either of images taken with the iPad or of images copied into Photo (or camera roll) on the iPad?

    Is there a way to view image numbers (metadata) on the iPad Photo app, distinguishing those taken with the internal camera from those downloaded from external camera or copied from an email?

    sberman: My iMac is running iTunes 11.0.2 already. As well, the Photos tab in the iTunes window shows that "Sync Photos from" is un-checked. And in the box to the right of it is the greyed-out empty folder that I previously synced to in order to remove photos from the Camera Roll.
    Ralph9430: I did a reset (Home + Sleep) earlier when I was trying everything I could think of. I have also re-synced a couple of times. No luck.
    Thanks anyway. I was hoping someone out there would tell me they've experienced the same problems (non-functioning DELETE button, and persistent data in Photo Library), even if they haven't found a solution. Then I could assume it's a iOS 6 bug. All I can think of to do next is a full iPad restore.

  • Is there any BAPI or function module  to delete entries from a table (VBAK)

    Hi Everybody,
    this is my first thread in SDN...
    my problem follows...
    A report is be created that selects all sales orders created by e-Sales that are more than 20 minutes old and still have a delivery block:
    tables:
    VBAK     sales document: header data
    selection fields:
    VBAK-LIFSK      &#8800;     <BLANK>
    VBAK-ERNAM     =     userID used by e-Sales / IVE
              (EP-BATCH / EAI-BATCH)
    VBAK-ERDAT      <=     Current system Date
    VBAK-ERZET     <=     Current system Time - 20 minutes
    These orders should be deleted from SAP system.
    This report should be scheduled to run regularly every 10 minutes.
    my doubt : is ther any BAPI or Function module to delete entries from a standard table...if no what is the way to delete the enteries from a std table...
    best replies will be rewarded....
    regards
    Reddy

    Hi Vasanth ,
    thanks for your reply.
    i tried in the same manner what u mentioned.
    but how to pass only one parameter to the functionmodule..
    here in this case we have to pass only update flag as 'D'..
    i did the same it giving dump..
    An exception occurred that is explained in detail below.                          
    The exception, which is assigned to class 'CX_SY_DYN_CALL_ILLEGAL_TYPE', was      
      not caught and                                                                   
    therefore caused a runtime error.                                                 
    The reason for the exception is:                                                  
    The call to the function module "BAPI_SALESORDER_CHANGE" is incorrect:                                                                               
    In the function module interface, you can specify only                            
    fields of a specific type and length under "ORDER_HEADER_INX".                    
    Although the currently specified field                                            
    "INT_ORDER_HEADER_INX" is the correct type, its length is incorrect.              
    my pgm :
    *& Report  YNEW_ORDER_DELETION
    REPORT  ynew_order_deletion.
    TABLES:vbak.
    PARAMETERS:
         p_lifsk LIKE vbak-lifsk DEFAULT '02'.
    SELECT-OPTIONS:
       s_lifsk FOR vbak-lifsk DEFAULT '10',
        s_ernam FOR vbak-ernam,
        s_erdat FOR vbak-erdat,"DEFAULT sy-datum.
        s_erzet FOR sy-uzeit.
    *PARAMETERS:
    p_erzet LIKE sy-uzeit.
       s_erdat like vbak-erdat,
       s_erzet like vbak-erzet.
    DATA:
       BEGIN OF int_final OCCURS 0,
            w_vbeln TYPE vbak-vbeln,
       END OF int_final.
    DATA:
      int_return LIKE bapiret2 OCCURS 0 WITH HEADER LINE.
    DATA: int_order_header_inx LIKE bapisditmx OCCURS 0 WITH HEADER LINE.
    DATA:
      wf_time TYPE sy-uzeit.
    INITIALIZATION.
      s_ernam-low = 'KULKARMA'.
      s_ernam-sign = 'I'.
      s_ernam-option = 'EQ'.
      APPEND s_ernam.
    s_ernam-low = 'EAI-BATCH'.
    s_ernam-sign = 'I'.
    s_ernam-option = 'EQ'.
    APPEND s_ernam.
    wf_time = sy-uzeit - 1200.
    p_erzet = sy-uzeit - 1200.
    p_erzet-low = wf_time.
    APPEND s_erzet.
      int_order_header_inx-updateflag = 'D'.
      APPEND int_order_header_inx.
    START-OF-SELECTION.
      SELECT vbeln FROM vbak
                       INTO TABLE int_final
                       WHERE lifsk EQ p_lifsk
                         AND ernam IN s_ernam
                         AND erdat IN s_erdat
                         AND erzet IN s_erzet.
      IF sy-subrc = 0.
        LOOP AT int_final.
          CALL FUNCTION 'BAPI_SALESORDER_CHANGE'
            EXPORTING
              salesdocument         = int_final-w_vbeln
      ORDER_HEADER_IN             =
        order_header_inx            = int_order_header_inx
      SIMULATION                  =
      BEHAVE_WHEN_ERROR           = ' '
      INT_NUMBER_ASSIGNMENT       = ' '
      LOGIC_SWITCH                =
      NO_STATUS_BUF_INIT          = ' '
            TABLES
              return                      = int_return
      ORDER_ITEM_IN               =
      ORDER_ITEM_INX              =
      PARTNERS                    =
      PARTNERCHANGES              =
      PARTNERADDRESSES            =
      ORDER_CFGS_REF              =
      ORDER_CFGS_INST             =
      ORDER_CFGS_PART_OF          =
      ORDER_CFGS_VALUE            =
      ORDER_CFGS_BLOB             =
      ORDER_CFGS_VK               =
      ORDER_CFGS_REFINST          =
      SCHEDULE_LINES              =
      SCHEDULE_LINESX             =
      ORDER_TEXT                  =
      ORDER_KEYS                  =
      CONDITIONS_IN               =
      CONDITIONS_INX              =
      EXTENSIONIN                 =
        ENDLOOP.
        LOOP AT int_return.
          WRITE:/ int_return-type,
                  int_return-id,
                  int_return-number,
                  int_return-message.
        ENDLOOP.
      ENDIF.
    please help me ..its a very urgent issue to be solved...
    am waiting for ur reply...
    regards
    gangareddy

  • Is there a way to get phone numbers back on my iphone / or excel sheet?

    Is there a way to get phone numbers back on my iphone / or excel sheet?
    What I've done:
    I've upgraded my iphone from 2.0 to 2.1. To be able to do this I've upgraded to the latest iTunes and switched my USB port several times until it was finaly installed. Then, despite iTunes taking 3 hours time for making backups, I found my phone to be completely empty when it was finished. So, I tried to restored the phone. This gave an error 1602 and bricked my phone. Tried it all over again two times more with same results.
    The bottom line is that I have an empty phone and I really would like to have my phone numbers back. There's some 1.02 GB of backup information in the apple directory, so I guess they must be something there. But how do I know which file I need and how to decode it?

    Your contacts should still be on whatever program you sync your iphone to (i.e. Outlook, address book).
    The iphone is not a stand alone device. It is designed to be synced with a computer. If you have not been syncing with a compatible program, then you are out of luck. Your contacts are not included in the back-up because it is meant to be synced with your computer.
    "Although iTunes backs up most of your iPhone and iPod touch settings, downloaded applications, and other information (Contacts, calendars, notes, images in the Camera Roll), your audio, video, and photo content are not included in the backup."
    http://support.apple.com/kb/HT1414

  • I would like to put Dreamweaver 8 on a new computer.  There is no "deactivate" function and the technical support person I chatted with recommended I come here.  Can I just use the serial number again?  How can I deactive?  Has anyone else run into this?

      There is no "deactivate" function and the technical support person I chatted with recommended I come here.  Can I just use the serial number again?  How can I deactive?  Has anyone else run into this?  How can I get Dreamweaver 8, which is no longer being activated by Adobe, on a new computer?  Is it even worth doing or do I need to get a new version.  What are the killer features I'm missing?

    If you manage to get it installed on your current OS, don't forget to install the 8.02 update.
    Adobe - Dreamweaver Support Center : Updaters
    Nancy O.

  • Is there a BAPI or Function module can create a Customer Master record?

    Hi experts,
    In SE37, Is there a BAPI or Function module can create a Customer Master record?
    Regards

    BAPI_CUSTOMER_CREATEFROMDATA1
    also see this thread.
    Re: Create customer record  in SAP via BAPI
    кu03B1ятu03B9к

  • Using the lookup function in Numbers '09

    I'm looking for the way to have the lookup function in Numbers '09 return an error for a non-exact match.  Eg. I want an invalid part number to state this, but currently all I can get is the return of data for the closest match.  Thank you.

    when you use the VLOOKUP() function the last, optional, argument can request and exact match.  When an exact match is not available VLOOKUP() will return an error.
    you can use the IFERROR() function to trap errors like this:
    =IFERROR(<FUNCTION_TO_TRY>, "NOT FOUND")
    In your case.... if <FUNCTION_TO_TRY> is you VLOOKUP(<WHAT_TO_FIND>, <RANGE>, <COLUMN>, 0), the "0" specifies exact match and you could then place all this in the IFERROR() like this:
    =IFERROR(VLOOKUP(<WHAT_TO_FIND>, <RANGE>, <COLUMN>, 0) "NOT FOUND")
    <WHAT_TO_FIND> is what to look for,
    <RANGE> is where to look,
    <COLUMN> is the number of the column in the range you want to return

  • Module pool / Screen Prog is there any standard SAP functionality ?

    Hi I am creating a Module pool / Screen Prog. On this screen I have nearly 100 fileds , now I want to take print out of all the information shown on the screen for the same is there any standard SAP functionality ?
    Does SAP provides any standarar ready made functionality for the same. ?

    No, there is no standard functionality for this.  dynpros are not designed to "print out".  This is what list displays are for.  That said, you will need to write your logic to kick off  a list display with all of your field values there,  then the user can print.
    Regards,
    Rich Heilman

  • Is there a way to block certain numbers from iMessaging?

    Is there a way to block certain numbers from iMessages, such as Smart limits with AT&T?

    Sorry, no.

  • HT1463 Is there a version of "iWork" or "Numbers" that will work on iMac G5 OS 10.8?

    Is there a version of "iWork" or "Numbers" that will work on iMac G5 with OS 10.6.8?

    Yes; purchase and install an iWork 09 DVD.
    While it's impossible for a PowerPC Mac to be running Mac OS X 10.6.8, the answer is the same for a PowerPC Mac running 10.5.8 and an Intel Mac running 10.6.8, so in this case it doesn't matter which one you actually have.
    (71383)

Maybe you are looking for

  • To avoid data to show in a datalist

    I want to show some data by datalist. But some of them have to avoid. That is I want to show data without some data. Clearly I want to make a friend list so I have to show users from data base. But some friend who are already friend with him are not

  • Why can't I assign applications to spaces anymore?

    I used to have my different apps (Mail, iTunes, Safari) open in separate spaces and the SAME space every time.  I did this by right clicking on the open app icon in the dock and selecting options > Assign to > This desktop.  This no longer works.  No

  • Greyed out fields in xRPM

    Hi, I am doing assesment of xRPM. I have integrated the PS module in backend with xRPM. Now while uploading the data from backend I am getting the following fields as greyed out: Application- Application system-- Kindly let me know what changes are r

  • Sync Entourage Between 2 Computers

    Other than using a Palm and other than e2sync (which I don't understand yet how it works) is there any way to sync Entourage on 2 computers over the internet? PS. e2sync turns your Entourage info into iCal and then to isync to send to the other compu

  • How to keep the real data if number length bigger than 15 in excel format

    i have a bank card number column in report, the data type is varchar , and the data is always number , the length is bigger than 15, now if i download the report as excel format, this column's data will alwasys change to something like "5.41321E+17",