Is there a known issue with motherboard resources with nf2?

hello,
i just bought an epox nf2, setup everything, install xp pro, BUT after installing all drivers, i get a punctuation mark on one of the motherboard resources in dvice manager, its the second one, because i think there are 3 mobo resources. whats that? i installed all drivers already?
thanks,
edison

try downloading the driver package and finding a suitable update there... also checking the irq addresses in windows and then checking on boot up will also help connect which devices are which... for me i had a usb2.0 driver and a smbus driver to get and update

Similar Messages

Slow internet. Is there a known issue using time capsule with charter internet? Any ideas

Moved to new region that has only charter internet service available. Speeds are very slow and today not able to log-on at all. I use the charter cable modem and time capsule. Anyone aware of issues with compatibility or have other ideas other than ditching charter. Unfortunately that isn't an option. Thank you.

Don't know the service you speak of, but simply remove the TC from the equation.. connect a computer directly to the cable modem... power down everything and wait a few minutes.. power up the cable modem.. wait a few minutes and then the computer. Test the speed. You will then have determined if the TC is the issue or not.
There are reports of the TC being slow.. not sure of the reason yet, but some people have placed their TC in bridge and used another router to get around it.
You can also see if this is caused by firmware, by changing the TC to 7.5.2 if you are on later buggy 7.6 versions.
Also test with ethernet and wireless..
Step through each step and eliminate that as a possible cause of the speed issue.

Are there any known issues with Adobe Edge Animate and Yosemite? Experiencing performance issues since upgrading OS

Are there any known issues with Adobe Edge Animate and Yosemite? Experiencing performance issues since upgrading OS. Animation I was working on that had been performing in browser fine suddenly stopped working, and was not related to any action I had done at that point. Also was working in it today and program stopped responding to key board short cut commands.

I am having a whole slew of odd interface problems with a fresh 2014.1.1 on a fresh macbook pro with latest Yosemite. Program locks up, cursor selections don't show, things disappear. I have a mac mini also and the program runs fine on it. Is there possibly something related to the solid state hard drive in new macs?

HT5521 I have a lightning to usb cable which is 2m in length. Is there any known issues with trying to recharge an iPad 4 with this longer length. It seems to me it is taking much longer than a 1m cord to recharge.

I have a lightning to usb cable which is 2m in length. Is there any known issues with trying to recharge an iPad 4 with this longer length? It seems to me it is taking much longer than a 1m cord to recharge.

Axel,
I'm afraid a new SSD won't be different from your bad USB stick. I had similar issues over USB with both a (no-brand) stick and TWO 64gb Kingston SSDNow's (running Kubuntu 12.04 with Kernel 3.11, ia_64): it all runs exceptionally well (wanna know how it feels like booting in 5 sec?) for a few days - then suddenly you find yourself facing that dreaded (initramfs) prompt. You ask yourself: why? Did I upgrade grub lately? Did I upgrade the Kernel? I don't recall so. Ok, let's fix this... insert favorite live cd, boot, fsck...what???? THOUSANDS of errors??? Hundreds of files and directories corrupted, and the system is unusable - Reinstall everything from scratch onto another drive.
Rinse and repeat: did this 3 times. Then I found this analysis:
http://lkcl.net/reports/ssd_analysis.html
I also suspect USB power interrupts more abruptly than SATA power, at shutdown - basically aggravating any power interruption damages. So now I'm going to:
- buy an Intel S3500!
- add commit=1 to my mount options in /etc/fstab
- edit shutdown procedure to add a 5-10 sec pause after unmounting drives.
Just my two cents.
Andrea
Last edited by andreius (2013-12-29 16:51:04)

Are there any known issues with focus stacking or auto align causing PS to stop responding?

Are there any known issues with focus stacking or auto align causing PS to stop responding?

BOILERPLATE TEXT:
Note that this is boilerplate text.
If you give complete and detailed information about your setup and the issue at hand,
such as your platform (Mac or Win),
exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge,
your settings in Photoshop > Preference > Performance
the type of file you were working on,
machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
what troubleshooting steps you have taken so far,
what error message(s) you receive,
if having issues opening raw files also the exact camera make and model that generated them,
if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
etc.,
someone may be able to help you (not necessarily this poster, who is not a Windows user).
a screen shot of your settings or of the image could be very helpful too.
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!

Are there any known issue with the HP 3005pr USB 3 replicator ?

Hi,
I recently ordered an HP laptop Pavilion dv6t-7000 with Intel i7 and nVidia video. While the unit isn't due to arrve for about 2 weeks, I'm looking for a docking station/port replicator.
Are there any known issues with the HP 3005pr USB 3 replicator ? Does it fully support Win7 64 bit? I am also considering the Targa U3 unit, but I'd prefer HP if I can be assured that it works.
I'd like to be able to leave the laptop closed when at my desk so I can use an external keyboard, mouse, and monitor.
Does HP make this device or does a 3rd party make it for them?
I've read so many stories on various forums regarding these things.
Any suggestions from HP or others? I need to order something soon, but I don't want head aches when it arrives.
thanks,
Steve

This HP USB 3.0 Port Replicator fully supports with Windows 7 64-bit, if that is the one that you are talking about.
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

Are there any known issues upgrading to 10.8.3 from 10.7.5 with Parallels Desktop already installed in 10.7.5?

Are there any known issues upgrading to 10.8.3 from 10.7.5 with Parallels Desktop already installed in 10.7.5?

Welcome to Apple Support Communities
Most of the applications compatible with Lion are also compatible with Mountain Lion, so you shouldn't have any problem. Mountain Lion supports the latest update for Parallels 7 and 8, so if you haven't got one of these versions, you should upgrade it before upgrading Mac OS X. That application uses extensions, so it may cause kernel panics

I have a mac book pro mid 2011 and it overheats is there any known issue with this model

overheating issues
I have a mac book pro mid 2011 and it overheats is there any known issue with this model

Are you gaming or watching videos when the unit heats up? As your core temperatures rise, it's normal for the fans to speed up - but if you're not running any CPU/GPU intensive apps, it's not normal for your MBP to heat up or for the fans to run high. Download the free iStat Pro widget and either record or take a screen shot of your temps and fans speeds. Oh, and your MBP should not heat up just because you're using the power adapter.
Clinton

Are there any known issues when using PSE 13 after installing Apple's recent 10.10.3 Combo update for Yosemite?

I've had Yosemite for some time and bought/installed PSE 13 afterwards.
In the last few days I upgraded to Yosemite 10.10.3.
As a PSE 13 novice I've been working my way through "Adobe Photoshop Elements 13 - Classroom in a Book". Working through the exercises I've found my iMac is sometimes taking longer to process the functions I'm using than prior ro the 10.10.3 upgrade. E.g., using the Healing Brush tools, Straighten Tool etc.
I've struggled with Apple's upgrade and had to re-install my machine from a previous Time Machine Backup and so I was wondering:-
Are there any known issues with PSE 13 post 10.10.3 upgrade?
Are there things I should be concerned about in the future before accepting an OS X upgrade?
Thanks,
Andy

No, no known issues. However it's a good idea to always delete preferences after OS X system updates.

Is there a known issue for using IE11 when using business catalyst cms

Is there a known issue for using IE11 when using business catalyst cms? I have a client trying to update pages on her site using IE11 and the it says it updates successfully, but the new content is not saved.

I concur with Barry; I see no significant difference in using the Home button vs. the gestures. But the "fade" effect is part of iOS 7.1 and there's no way to disable it that I know of.
Regards.

Are there any known issues when updating to iLife 9.12

I am getting a notice to update iLife to 9.12. Are there any known issue with this release?

Yes. There are issues with syncing to iOS devices. These are fixed in 9.1.3, so update to 9.1.2 an then to 9.1.3
Regards
TD

"...safari, there are known issues"..wanted to know has that been resolved? If yes, can ask that message be

If u r trying to book an appointment with US visa office, ustraveldocs website is the place . It was dissappointing to see a message posted "do not use safari, there are known issues"..wanted to know has that been resolved? If yes, can ask that message be deleted...since this happens to be a US govt website, it puts really lot of strain on the users seeking appointment via ipad mini...we have to find non safari browser, then complete appointment process...http://www.ustraveldocs.com/in/ is the website where one comes across that message while making payment for booking appointment....is that a known issue?...

Someone posted today (9/19/06) on the MacInTouch forums that they just got their MacBook back from repair for RSD, and the replaced parts were:
APP-630-7872 PCB, MLB, 2.0GHZ DC, SMS/KIONI
APP-607-0142 ASSY, HEATSINK, M42
This is the first post I have seen that shows a different part number for the heat sink than the one for my repair from almost a month ago:
APP-603-8071 ASSY, HEATSINK, M42
Perhaps interesting.

I've been getting "Unknown error" a lot lately, is there a known issue here?

"Sync encountered an error while syncing: Unknown error."
I have been getting this error lately across multiple desktops. Is there a known issue recently introduced into the Firefox 4 beta series?

Have you tried the standard fixes:
- Reset:
Reset iPod touch: Press and hold the On/Off Sleep/Wake button and the Home
button at the same time for at least ten seconds, until the Apple logo appears.
- Restore the iPod from backup
- Restore the iPod to factory defaults/new iPod.

Are there any known issues running MAC OS X 10.8.5 on my IMAC and MAC OS X 10.6.8 on my MAC Server?

Are there any known issues running MAC OS X 10.8.5 on my IMAC and MAC OS X 10.6.8 on my MAC Server?

To answer the obvious question. No. None that I've seen. But it may depend on what you mean exactly?
Connecting to file sharing service - None that I've seen
Connecting to Open Directory (assuming proper configuration) - None that I've seen
Using the Server's Mail Service (assuming proper configuration) - None that I've seen
I can say the same about anything else the Server may or may not be offering.

GX633 - ENE CIR I/O conflict with Motherboard Resource

Hello everyone...I'm a newbie here.
I have MSi GX633 here with latest BIOS and official MSi driver (except VGA and Sound), running Windows 7 Professional x86.
I've own my notebook for 2 year, and just found this yesterday.
Recently found that my ENE CIR Reciever driver had conflict with Motherboard Resource...
Iam opening Device Manager, and then when I check ENE CIR properties, on General tab it say "the device is working properly".
But on the Resource tab it say "Input/Output Range 004C - 004F used by: Motherboard resources".
So I search Motherboard resource device on the System Device. It is hidden by default. Looks on the properties, on resource tab and found conflict message too.
It said :
Input/Output Range 0044 - 005F used by: ENE CIR Receiver
Input/Output Range 0062 - 0063 used by: Microsoft ACPI-Compliant Embedded Controller
Input/Output Range 0065 - 006F used by: Microsoft ACPI-Compliant Embedded Controller
Any one share same problems here with your GX633 or another notebook with ENE CIR built in device???
If one of you had already solve this bug, please share it...
Thanks...
NB: sorry about my bad spelling english language

Quote from: Stu on 17-June-11, 01:35:02
What 'MCE Remote' are you using, and can you define 'doesn't work' more clearly?
ok, i can explain that. My friend had same notebook like mine. And he had a Microsoft remote control that work with his notebook. But it can't work on my notebook. I don't know about that remote's model/type/series, if that is what u ask. All i know is thats mce remote control.
but. . .looks like it doesn't matter anymore right now.
Ive got worse matter than this.
yesterday i use my notebook to copy some file to external hdd, than scan external hdd with avast antivirus. I take a cup of coffe and smoke while waiting avast finish it job. I forgot to attach ac adapter on it. When i came back, its already off with power led colour red, indicating that my notebook is low on power. So i charge it, then turn it on. I was surprised to know that my lcd not display anything. Blank without backlight. Every thing run like normal, just lcd not light up. And hdd activity indicator is blinking 3x per second...
can u help me Stu??

Is there a known issue with motherboard resources with nf2?

Similar Messages

Maybe you are looking for