Is there a possibility to run tRFC entries alone in Separate application server

Please let me know if there is a possibility to run tRFC entries alone in separate application server.
If yes , kindly let me know how it can be tracked and separated to server as we have immediate idocs also which will run via tRFC.
Thank you !!

Hi,
Thank you for your interesst.
This internet button key is one of buttons located above the keyboard near the power button. What I have achieved to this moment was to stop it functionality in the system by clearing the entries in the fields Computer\HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Explorer\AppKey\17\ShellExecute and entry
Computer\HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Explorer\AppKey\7\Association that was http
After these changes in registry the behavior of the button was suppressed, the Firefox stopped to start unexpectedly all the time – so in system it works. But the problem is still when I have opened Firefox. Every time when you want to surf in internet – the homepage is activated also unexpectedly. I wrote this post with intention to ask if there is a possibility to switch off the functionality of this quick launch button in Firefox. Because I assume Firefox overrides the system setup – this I have made in registry. I tried with some option changes in about:config but without success. And I know that for older versions of firefox was some option in about:config do disable_quick launch button. But in 10.0.2 I couldn't locate it.
Thank you
Regards
Lukasz

Similar Messages

  • Is it possible to run a Windows domain with a Mac Server?

    Looking for some advice on getting rid of our Windows domain controller (DHCP server, AD, etc.) in favour of a Mac Server (which we own).  Is it possible to run a Windows domain with a Mac Server?

    Snow Leopard Server (10.6) and earlier included Samba which supported acting as an NT Domain Controller (this pre-dates Active Directory). Lion (10.7) and later as standard can no longer act as an NT Domain Controller nor can they act as an Active Directory server.
    So the short answer is no.
    Theoretically you could port Samba4 to a Mac and Samba4 can act as an Active Directory server. In reality this is not going to be easy but is theoretically possible.
    An easier option might be to run a copy of Linux (e.g. Ubuntu) in a virtual machine e.g. using VirtualBox and then run Samba4 in that and configure it to act as and Active Directory server. Then you could connect the Mac side to the Samba4 Active Directory server. This approach would use all Mac hardware, and not have any extra costs of licenses to buy and as far as all the rest of the network is concerned would be a standard Active Directory server environment.

  • How Can I run My Forms And Reports On Application Server 10 g Release 3

    Hi Everybody
    i need to learn steps to configure forms and reports on application server 10g release 3 pls help , i am a beginner

    hi,
    I'm also need to know "How to run My Forms And Reports On Application Server 10 g Release 3". So if u know the steps then please share with me .....

  • Is there a possibility to run RSRV fix in background?

    Hello,
    Is there a possibility to schedule/run the "error correction" part of the RSRV result as a background job and not dialog.
    Thank you

    Hi Blue005,
    there is no standard report provided as standard to do the 'Repair' tasks within a BGD job.
    The reason for this is that some repairs have to be executed in a certain order or a certain time (when no other jobs can interfere). Furthermore these repairs should be supervised by an administrator.
    The system is not supposed to do this automatically.
    So you'd have to create your own Z-report making use of report RSRV_JOB_RUNNER (which are the actual RSRV tests) or the function module RSDRD_DIM_REMOVE_UNUSED.
    Rgds,
    Colum

  • Running BPEL in Sun Java System Application Server 9(Glassfish)

    Dear Members
    I am using Glassfish as my application server for my webservices project,
    for services orchestration i planed to go for active BPEL Engine whis is developed by Active Endpoints, it an opensource, I need to know that can i run ActiveBPEL engine by Glassfish if yes then how explain me, wheather i have to plugin or what i have to do, i i cant able to run then suggest me for BPEL Orchestration which engine can i go for, dont suggest me to go for Netbeans 5.5 Preview which had BPEL designer and Engine.
    Aslo if any one know about PXE BPEL engine Which is available in Glassfish also help me how i able to use that PXE BPEL using glassfish wheather the PXE is in built or we have to plugin that PXE with glassfish

    To deploy a JBI application to Sun's App Server, you will need a JBI compliant ESB installed. OpenESB would be my first choice here. Then as far as installing your components without Netbeans, there are two choices. 1) Copy your SA's to the JBI/ESB autodeploy directory and you binding components and service engines to the JBI/ESB autoinstall directory. 2) Use the ant tasks that the JBI specification (http://jcp.org/en/jsr/detail?id=208) requires for all JBI implementations. OpenESB's JBI tasks are detailed here: http://wiki.open-esb.java.net/Wiki.jsp?page=JBIAntTaskReference. These ant tasks can be wrapped with maven goals if needed.
    Jeff

  • I can't run powershell to install IIS and Application server... whats going on here?

    PS C:\Windows\system32> Add-WindowsFeature -Name Application-Server,AS-Web-Support,Web-Common-Http,Web-ASP,Web-Includes,
    Web-CGI,Web-Asp-Net,Web-Net-Ext,Web-ISAPI-Ext,Web-ISAPI-Filter,Web-Http-Logging,Web-Request-Monitor,Web-Basic-Auth,Web-W
    indows-Auth,Web-Filtering,Web-Performance,Web-Mgmt-Console,Web-Mgmt-Compat,Web-Server,WAS -IncludeAllSubFeature -Source
    wim:D:\sources\install.wim:2
    Add-WindowsFeature : The request to add or remove features on the specified server failed.
    Installation of one or more roles, role services, or features failed.
    The source files could not be downloaded.
    Use the "source" option to specify the location of the files that are required to restore the feature. For more
    information on specifying a source location, see http://go.microsoft.com/fwlink/?LinkId=243077. Error: 0x800f0906
    At line:1 char:1
    + Add-WindowsFeature -Name Application-Server,AS-Web-Support,Web-Common-Http,Web-A ...
    + ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
        + CategoryInfo          : InvalidOperation: (@{Vhd=; Credent...Name=localhost}:PSObject) [Install-WindowsFeature],
        Exception
        + FullyQualifiedErrorId : DISMAPI_Error__Cbs_Download_Failure,Microsoft.Windows.ServerManager.Commands.AddWindowsF
       eatureCommand
    Success Restart Needed Exit Code      Feature Result
    False   No             Failed         {}

    "MS Wants us to use powershell AND installation media AND be connected to the internet AND not have a WSUS server... "
    Don't quite understand the rant, but that's okay.
    I look as connectivity to the internet as a last resort - I don't know that I have ever used it and my labs tend to be completely isolated from the internet.  Connectivity to the internet is not a requirement if you are using the -Source parameter. 
    Connectivity to the internet is in lieu of the -Source parameter.  The installation will first check if the files are local - which they are for most cases as they are in the local SXS directory.  If for whatever reason, e.g. they have
    been deleted, the installation will look for an alternate location.  If a -Source parameter is specified, it will look there.  If none is specified, it looks to the internet.
    If you plan on using the -Source parameter, it has to point to something and installation media is handy.  But whenever I have needed it (the only time I have needed it is for .NET 3.5/2.0) I sometimes I use the media.  Sometimes I have simply
    copied the SXS directory from the media and used it without the rest of the media.
    A WSUS server has absolutely nothing to do with this.  A WSUS server does not provide 'connection' to the internet for the machine on which you are trying to install.  Connection to the internet means that you can browse the internet from the machine.
    The post that aperelli pointed you to did have a reply that may be germane.  You don't mention if this is a core installation or a full installation.  One of the options you have chosen in not valid on a core installation.  Since we don't
    know what your environment is, this is a shot in the dark.
    Another point is that there could be some sort of conflict of options chosen.  My personal preference would be to break the installation into smaller steps - maybe even a single feature per PowerShell cmdlet.  I don't think you will see any difference
    in the amount of time it takes.  Then, if there is some sort of an issue, you would know exactly which feature is creating it.
    . : | : . : | : . tim

  • Run Oracle Web Logic and Oracle Application Server 10g on same server

    Since oracle has chosen to release adf faces 11g, before the SOA suite 11g is released, we are facing the challenge to run both Oracle Web logic and Oracle Application Server 10g on the same server.
    If anyone have any experience in this setup or has knowledge of other feasable setups please let me know.
    Regards.
    Jan

    What version of Oracle Application Server 10g are you installing?
    If you are installing 10gR2 (v10.1.2.x) have you taken a look at point #70 in "Table 2 Additional Information for Certified Platforms" section here?
    http://www.oracle.com/technology/software/products/ias/files/as_certification_r2_101202.html
    Thanks
    Shail

  • Is it possible to upgrade only apache in oracle 10g application server.

    Hi All,
    I have to upgrade only apache in oracle 10g application server with out upgrading oracle 10g as.
    Is it possibel to upgrade only apache version in oracle 10g application server. if yes.could you suggest the steps that i need to follow.
    This is very urgent.
    Thanks in advance.
    Regards,
    Sathya

    If your trying to upgrade just apache in that oracle home, then no. If your trying to upgrade to a real apache version, from apache.org, mod_oc4j won't work. You need to use Oracle's version of Apache or HTTP Server.
    Is there a reason you only want to upgrade Apache and not the whole oracle home?
    There are ways to do it, but it wouldn't be supported by Oracle and I wouldn't recommend that either.
    Edited by: user11993398 on Apr 13, 2011 3:04 PM

  • Is there any possiblity to run 2 same actions on same day...

    Hi Experts...
    According to my user s need..they want to run "change of position action" twice on the same date with different position Ids.
    I have tried but the recent action overrides the first action details.
    In overview i can able to see only one Change of position action.
    Even i tried to see 0302 IT through SE11.There i have found additional action is there for every action performed to him including Hiring action.There is only one addtional action is showing up for change of position action.
    Please advise me to resolve the problem.
    How i have to answer the client.
    Regards,
    Ram sai.

    Hi,
    Puneet is right. 2 actions are possible (if one of them doesn't change the employment status) but they should be different.
    If you run the same personal action on the same day, then it's not an additional entry but a chang eof the earlier captured action so no recording of a 2nd action.
    Wilfred.
    PS For what it's worth, I won't bother creating an action '2nd position change' because then in no time action 3, 4, 5 will be "required" as well.
    Plain and simple: It's not possible to record the same action on the same day twice.

  • Run remote batch file from Web Application Server

    Hello,
    I've developyed a Java program and deployed it on WAS v7.1.
    My java program tries to run a remote batch file which is located on remote Windows file system (and not on the WAS file system itself).
    The batch file was launched on the remote server (I saw it on the Task Manager of the remote server), but the remote batch file actually wasn't run (it was stuck).
    In order to run the remote batch file from my java program that is deployed on the WAS I've created a batch file on the WAS file system which its contnet is:
    cd c:\jobs
    psexec.exe 
    iltlvt40 -u SAPServiceCE1 -p a2i2000! c:\automation\DiskSpace\runDiskSpace.bat
    The jobs folder contains the psexec.exe file (you can find more details about the psexec on this link: http://technet.microsoft.com/en-us/sysinternals/bb897553.aspx).
    iltlvt40 is the remote server.
    SAPServiceCE1/a2i2000! is a user/password on the remote server which has a full permissions.
    My java program calls this batch file using the Runtime.exec() java method in order to run the remote batch file.
    Please guide me how to solve this problem?
    Best regards,
    Ahmad

    Hi,
    To which batch file you have meant to add some commands: for the local one or remote?
    I've added to the local one some different commands and it's works.
    I think there is a permission problem when we are trying to go out of the WAS file system.
    Best regards,
    Ahmad

  • Run a report in Form10g using Application Server

    I Installed Oracle Developer Suite and Oracle Business Intelligence Tools 10g (10.1.2.02).
    I create a report City.jsp in Report Builder 10g.
    I create a report object in Form10g. In dialog box I select use exiting file and browse the file CITY.JSP.
    set property of report
    and write following code in When-Button-Pressed trigger
    DECLARE
         repid REPORT_OBJECT;
         v_rep VARCHAR2(100);
         rep_status VARCHAR2(20);
    BEGIN
         repid := FIND_REPORT_OBJECT('CITY');
         v_rep := RUN_REPORT_OBJECT(repid);
    END;
    No error, No output
    What is I missing ?

    hi
    try something like this.
    DECLARE
    repid REPORT_OBJECT;
    v_rep VARCHAR2(100);
    rep_status VARCHAR2(20);
    plid ParamList;
    vParamValue number;
    BEGIN
    plid := Get_parameter_List('tmp');
    IF NOT Id_Null(plid) THEN
    Destroy_parameter_List( plid );
    END IF;
    plid := Create_parameter_List('tmp');
    add_parameter(plid,'p_parameter_name',text_parameter,to_char(:block.item));
    Add_parameter(plid, 'PARAMFORM', TEXT_parameter, 'NO');
    repid := FIND_REPORT_OBJECT('REPORT6');
    SET_REPORT_OBJECT_PROPERTY(repid,REPORT_COMM_MODE,SYNCHRONOUS);
    SET_REPORT_OBJECT_PROPERTY(repid,REPORT_DESTYPE,cache);
    SET_REPORT_OBJECT_PROPERTY(repid,REPORT_DESFORMAT,'PDF');
    SET_REPORT_OBJECT_PROPERTY(repid,REPORT_OTHER, 'paramform=no');
    v_rep := RUN_REPORT_OBJECT(repid,plid);
    rep_status := REPORT_OBJECT_STATUS(v_rep);
    WHILE rep_status in ('RUNNING','OPENING_REPORT','ENQUEUED')
    LOOP
    rep_status := report_object_status(v_rep);
    END LOOP;
    /*Display report in the browser*/
    WEB.SHOW_DOCUMENT('http://machine name:port/reports/rwservlet/getjobid'||substr(v_rep,instr(v_rep,'_',-1)+1)||'?
    '||'server=report_server_name&P_parameter_name='||:block.item||
    '&paramform=no');
    END; sarah

  • Possible to connect remotely to Apache TomCat JSP application server

    Hi, I've just installed an Apache TomCat server and locally playing around with some JSP and Servlets.
    I have an website which is hosted remotely by an hosting company.However they do not provide JSP/Servlets server as an service.
    I want to know is it possible to add some code or something which connects to my JSP/Servlet TomCat server remotely. So, allowing me to add JSP code or Servlets to say my index.html at my website host location which then connects from their to my TomCat server JVM and spit the goods back out at my website location.
    Is this possible? seems quite awkard?

    You are certainly not in an ideal situation. While you could use AJAX, and a library like DWR to send requests between the hosted website and whatever JSP/Servlet engine you have available, the resulting application will likely be slower and less reliable than if you hosted it all in the same place. Realistically, you won't save yourself any effort by doing it this way. Application hosting is a lot more resource-intensive than hosting static content, and even more so due to the amount of abuse that goes on in the wild Internet.
    While you've solved the problem temporarily, your JSP/Servlet engine is still vulnerable to DoS-based attacks once it's determined where your AJAX servlets reside. The only long-term solution is to go with a provider that has proper JSP hosting that is known to have good security.
    Brian

  • Possible to run soa suite without admin server?

    Hi,
    I'm wondering if it is possible to run the SOA components on a managed server without the admin server running. I intended to shutdown the admin server in production but when I do that I get errors in my (managed) soa server. I believe this was possible previously. Why does it need the admin server?
    version is 10.3.3

    Hi,
    do you mean in weblogic domain without running admin server you were able to run managed(soa) servers???
    Without admin server how Managed servers gets start?
    Though there is a concept in weblogic server called MSI mode,in that case managed servers can be running withut admin server, but very first time you have to start Admin server followed by Managed servers.
    Thanks,
    Deba

  • Is it possible to run scheduled job

    Is it possible to run scheduled job (custom developed java application), for doing some periodic database operstions in portal.
    I'm using portal database (maxdb) with my portal application.I must do some periodic calculations and store them into database table.Therefore i must use scheduled job running on ortal server.
    Is it possible? If possible, how?
    Thanks.

    Hi,
    Yes it is possible with SAP NetWeaver Scheduler for Java.
    You can check below link for more information:
    http://help.sap.com/saphelp_nwce71/helpdata/en/44/03d66015ee10b3e10000000a11466f/content.htm
    http://help.sap.com/saphelp_nwce71/helpdata/en/45/45d287e620507be10000000a1553f6/content.htm
    Thanks
    Sunny

  • Use other application server to run Oracle generated web services

    Hi all,
    I am currently running an Oracle 9i database and application server (OC4J) and use WebservicesAssembler (JPublisher) to expose PL/SQL packages as web services to an external PDA application.
    Is it possible to run the EAR files (the assembled web service) generated in this way on another type of application server? This question because I need to use Resin in a live environment.
    If this is not possible, would there be a way to work around it? I mean by manually programming the web service against the PL/SQL package. And if so, has anybody tried that out before?
    Are there other alternatives?
    Thanks in advance for your help!
    Regards,
    Stijn Lambert

    Hello,
    Which version of OracleAS/Web Service stack are you using?
    If you are using a version prior to 10.1.3 the Web Service stack is proprietary and not portable.
    JAX-RPC used in 10.1.3 is more portable but you have to be very careful about the way you create your deployment descriptor.
    In a general manner you can always create pure JDBC/JPublisher clients and expose them using the Web Service that you want.
    Regards
    Tugdual Grall

Maybe you are looking for

  • SAP R/3 4.6c online help from html help CD

    Hi : I copied SAP R/3 4.6c help into SAP Server . How to access this help from online SAP screen . Please help for this . Thanks in advance, Chimsi

  • ALV report down load to EXCEL

    When I am trying to down load the ALV report to EXCEL. The report fields are not coming in the same order as they are in the report. Please advice. <b><REMOVED BY MODERATOR></b> Thank you. Gouri. Message was edited by:         Alvaro Tejada Galindo

  • Sound on palm pre

    My phone will no longer allow me to hear an incoming call without going to speakerphone.  Sometimes it rings, sometimes it doesn't.  I can listen to Pandora if I use the headphones.  Sometimes it won't even make a noise when I throw out my cards.  Oc

  • Export to Livetype - resolution doesn't match

    I've got a 720p project in FCE, when I say export to Livetype so i can set up the titles in the right places, two things I want don't happen... (1) It exports it as 4:3 even though I'm importing to a 720p matching project in LT (2) I want to be able

  • Who can tell me why?

    I get some Excepiton in my applet here: Exception occurred during event dispatching: java.lang.IllegalArgumentException: Width (800) and height (0) must be > 0      at java.awt.image.SampleModel.<init>(SampleModel.java:105)      at java.awt.image.Sin