Is there a reason I can't print wirelessly in Aperture? I am able to from other programs. When I try to print in Aperture, the printer tells me it's offline.

Aperture won't print a photo wirelessly. My other programs print fine wirelessly. Anybody know why? I'm using OS X 10.6.8, Aperture 3.2.4 on an iMac with an Epson Artisan printer. When I try to print in Aperture, the printer utility tells me the printer is offline. But it isn't. I am shooting in RAW, by the way.

I don't have much, but ... make sure you are selecting the entry for the _wireless printer_. It's been some time since I did this — and a few OS's and Aperture versions ago — but I remember that there were multiple entries for my printer: USB, Ethernet, Wireless, and mounted to other computers on the network.

Similar Messages

When I try disabling colour management in the printer driver, it keeps turning back on

I'm using Lightroom v2.4 and a Canon Pixma Pro 9500 printer with the latest driver. I've just tried to print from Lightroom for the first time since moving to this latest version of Lightroom and when I go into print setup and turn off colour management, the driver doesn't keep the setting. Nor does it allow me to do borderless printing. My choice of print quality is also lost - this never used to be a problem.
This is very frustrating and means I must use Photoshop to print which takes longer when there is much to do. Please can someone offer some advice. I can print from Photoshop without this happening.
Thanks
Joanne

Have you tried creating Print templates in LR? Available from the left panel
in Print module. That's what I do to make sure the printer driver settings
stay the same.
Are you quite sure you have the latest 9500 driver?
Eric
I'm using Windows XP SP3, and I have just one button at the bottom left of the
Lightroom print diaglogue window called 'Page settings', when you click this,
you can select the printer and go into properties, which is where I normally
disable colour management. It is also refusing to print at standard quality,
but it defaulting to high quality (which takes a lot longer).
Thing is that I can print from Photoshop without problems and it's from
Photoshop where I do much of my printing, but printing from Lightroom is good
if I have a big load of prints to do as it's so much quicker to set up and it
has the picture package facility.

I can't print in Adobe 11.0, I can print from other programs?

I have confirmed that I can print from other programs.
I have uninstalled Adobe and reinstalled to make sure the programs was the most up todate.
I have installed a new printer just today and confirmed the drivers are up todate.
I have confirmed there are no security issues with the document - documents.
I have tried printing the document as an image and it still will not print.
I don't get any errors, just nothing happens. It doesn't even go into the print que
Help!

I tried printing a simple PDF.
We couldn't print PDF's prior to the replacment of the printer, but I thought replacing the printer might help.
I have pulled some tech people here at the office to see if there is a common denominator between the computers and or the issues arising and nothing is coming up.
This is just so odd.

I am a innkeeper at a bed and breakfast. we use a third party web reservation site. is there any way i can link this website to my calendar to where all web bookings will be uploaded to my calendar. i have the most recent software on my mac

I am a innkeeper at a bed and breakfast. we use a third party web reservation site. is there any way i can link this website to my calendar to where all web bookings will be uploaded to my calendar. i have the most recent software on my mac

Hi,
Does the website have a WebDAV feed of their calendar?
John M

How can I get an image from the screen? Like screen printer in PC to pasting after in word or other program.

How can I get an image from the screen? Like screen printer in PC to pasting after in word or other program.

If you do Cmd+Shift+3 you'll get a full screen image saved to your desktop as a jpg file.
Also, you can use Cmd+Shift+4 and you'll get a cursor which you click+drag to draw a box. When you release the drag the boxed in area will be saved to the Desktop as a jpg file.

I just purchased Adobe Acrobat Standard DC andf upgraded from Acrobat XI. When I instalkled it on my PC the print Production Tools were there and functional. I installed it on my Laptop and those tolls are not there. What do I need to do to have Print Pro

I just purchased Adobe Acrobat Standard DC andf upgraded from Acrobat XI. When I instalkled it on my PC the print Production Tools were there and functional. I installed it on my Laptop and those tolls are not there. What do I need to do to have Print Production Tools on both computers?

This is quite odd. I wonder if you could try something for me on EACH computer.
Use Help > About Adobe Acrobat DC.
At the top of the box it should say Adobe Acrobat Pro DC or Adobe Acrobat Standard DC.
On each of the two machines, what does it say? (I think something odd has happened)

Hi there, my iMac has automatically been deleting files from my thumb drive when I try to open them. The lost files aren'tin the trash or anywhere else I can think of. Any ideas?

Hi there, my iMac has automatically been deleting files from my thumb drive when I try to open them. The lost files aren'tin the trash or anywhere else I can think of. Any ideas?

If one drive works and the other doesn't that points the finger at the errant drive. They are cheap, replace it. To check formatting right click it in Finder and choose Get Info and look for Format type. Finally do you eject it when removing it or do you just pull it out of the USB connection?

My iMac suddenly has a USB problem. I can connect to drives and printers. I am able to pul info off from drives. When I try to send info to a drive or printer, the connection is lost. All USB ports appear to have the same problem. Can anyone help?

My iMac suddenly has a USB problem. I can connect to drives and printers. I am able to pul info off from drives. When I try to send info to a drive or printer, the connection is lost. All USB ports appear to have the same problem. Can anyone help?

Please do 2-3 SMC and PRAM resets back to back and retest. Also use new cables, they can go bad.
Intel iMac SMC and PRAM resets

Travelling in Mauritania, cannot log into icloud with my PC netbook. I can read my mail on my iphone, but I get a message that "icould is not available" when I try to open it on the PC. It's very annoying as it's not so easy to type on iphone!

Very strange. I have a PC netbook that I use when I travel, and here in Mauritania, when I try to log on icloud to check my mail, it tells me that it is not available or the server is down - the internet is working for everything else. I can read my mail on my iphone, connected to the same network. Is there some reason ou can't open icloud on an iphone and a pc at the same time?

Been looking for similar posts, surprised I haven't found more, because I'm fairly certain that there is a current problem with some parts of Apple's server network: I have 3 iCloud accounts in Mail on my Macbook, and 1 of them (annoyingly, my main one) has not been able to connect for an hour or two. And both of the others wouldn't connect for a few minutes, but are now working again.
More suprising is that trying to log in to webmail (www.icloud.com) is giving a very unhelpful error message, suggesting the server is down. Everything else Internet is working fine for me, and haven't changed any settings, so fairly sure problem is Apple's end.
It's possible that your iPhone is collecting your mail via a different server route that is still working; my three iCloud accounts are collecting via p02.imap.mail.me.com, p09.imap.mail.me.com and p99.imap.mail.me.com, and it's only p02 that's consistantly not working.

Problems printing from other programs after printing using Word automation

I have an application that uses ActiveX to build a Word document. My print VI is attached. The problem that users are reporting is that after printing a report with my application, they can't print from any other programs until they restart their computer.
After my print VI runs, the only other Word automation is Document.Close and Application.Quit. I close all my references religiously and winword.exe closes just fine. I don't know what would be hanging around causing other programs to have trouble printing. One thing I don't like is the ActivePrinter property in Word. It changes the default printer in Windows. This is why I reset it using the printer LabVIEW reports as the default. I tried reading ActivePrinter and storing it in a wire, then resetting it with this string, but then even weirder things happened - the printout got all messed up. This is why I'm using the printer that LabVIEW says is the default.
Has anyone ever encountered anything like this?
Message Edited by Marc A on 01-12-2007 11:03 AM
Attachments:
Word_print.PNG ‏18 KB

goldn:
Welcome to the Apple Discussions. Just ran a test and I got a perfect card. Here's what I did.
1 - create the card and type Command-P.
2 - select Stylus Photo R200 under Printer
3 - click on the Advanced button
4 - in the bottom drop down menu select Paper Handling
5 - select the radio button "Use documents paper size: 7.00 in x 10.00 in
6 - now select Print Settings in the 3rd drop down menu
7 - select the type of paper you're using and the print quality you want. I used Photo and High Speed. (also used plain paper for my test)
9 - put a piece of 7 x 10 paper in the printer (yes, you'll have to trip the paper beforehand or use card stock designed for this)
10 - click on Print
11 - when the paper exits the printer quickly put it back in the printer
That will do it. Now there is a caveat. Putting it back into the printer before drying tended to get my leading edge nipped. If you use heaver card stock I don't think that will happen but just be aware. If you wait a moment to put the page, turned over, back into the printer to let the ink dry a bit, all you'll have to do is press the middle button which will be blinking red and that will feed the other side thru when you're ready.

Hi, after i changesdmy Apple id password, i can't uppdate mBox Mail app i bougth from App store, when i try to uppdate the app, the message " can't login in to itunes" cames opp.

Hi, after i changes my Aple id password, i can't uppdate mBox Mail app i bougth from App store, when i try to uppdate the app, the message " can't login in to ituns" cames upp. Why can't i not uppdate the App since i changes my password?

Hello there, Aruna Patel.
The following Knowledge Base article should provide the information you need to help resolve your issue:
Apple ID: 'This Apple ID has been disabled for security reasons' alert appears
http://support.apple.com/kb/ts2446
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro D.

I came home and attempted to power on my iPad2. I can see the backlight but nothing on the screen. When I try to reset by pushing the off button and the power button at the same time I can sometimes see the characters briefly but the screen has lines and

I came home and attempted to power on my iPad2. I can see the backlight but nothing on the screen. When I try to reset by pushing the off button and the power button at the same time I can sometimes see the characters briefly but the screen has lines. Can someone tell me if there is anything else I can do before a trip to the repair shop?
Will

If the Reset doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. Connect via cable to the computer that you use for sync. From iTunes, select the iPad/iPod and then select the Summary tab. Follow directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."
At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod. As before, say "yes." Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time. If that happens, only the apps that are part of the IOS will appear on your device. Corrective action is simple - choose manual "Sync" from the bottom right of iTunes.
If you're unable to do the Restore, go into Recovery Mode per the instructions here.

I am trying to move a pdf file onto my iPad2, and it says that the device is not connected or has stopped working. But Windows 7 recognizes the device and I can see my pictures. Same thing happens when I try to put music onto the iPad.

I am trying to move a pdf file onto my iPad2, and it says that the device is not connected or has stopped working. But Windows 7 recognizes the device and I can see my pictures. Same thing happens when I try to put music onto the iPad.

When in iTunes on the computer,my our ipadmshould show under devices.
Click on your ipadmunder devices then go to music at top center of the iTunes window, check what you want to sync for music. You need to set it to a folder if I remember which would have your music in it you want synced.
Same with PDF files.....there should be an option for data or even PDF files at the top center area of iTunes when the iPad is clicked under devices.
If your iPad does not show or you cannot click on it under devices which is in the leftane of iTunes, the iPad is not being seen by the computer.
Try unplugging the USB cord from the laptop then give it a few and see if the computer picks it up.

I have iTunes open in Windows XP and get an error 45048 message when I try to update apps thru the store. How can I fix this? I have reinstalled iTunes twice.

I have iTunes, latest version, open in Windows XP and get an error 45048 message when I try to update apps thru the store. How can I fix this? I have reinstalled iTunes twice but problem continues.

Try contacting iTunes via email to check if there is an issue with the account. go to apple.com/support/itunes
Click on iTunes Store account and billing and select inquiries. On the right side click on "email us".
Before doing that trying viewing your account information first. Open the iTunes on you mac, look at the menu and select store and select view my account. Try removing the card (this is only applicable if you don't have a pending charges with iTunes) and hit done. Sign out, quit iTunes and sign back in and try updating the apps again.

My ipod touch is currently running ios 4.2.1 I would like to run ios 5 or 6. When I try to update it on itunes, it tells me my software is up to date. Is there another way to upgrade the IOS?

My ipod touch is currently running ios 4.2.1 I would like to run ios 5 or 6. When I try to update it on itunes, it tells me my software is up to date. Is there another way to upgrade the IOS? Do I have to go to Settings>General>reset>Erase all content and settings before I can get the newer ios? If this is the case, how can I ensure all my content is backed up prior to erasing it all. Is there anyway to check to ensure the backup is complete and comprehensive? THanks!

A second generation iPod touch can't be updated past 4.2.1.
(88824)

Is there a reason I can't print wirelessly in Aperture? I am able to from other programs. When I try to print in Aperture, the printer tells me it's offline.

Similar Messages

Maybe you are looking for