Is there a recommended tutorial for editing multiple track regions?

I've been used to DP where you define a region of time on the sequence, select all the tracks you want to affect, then proceed to do any number of things with those tracks..like, maybe nudge them one way or another to line up a punch in more precisely. For example, I was tracking in another studio where they were using Nuendo. The session was laying down 8 tracks of drums to a stereo mix of the main tune. When the drummer wanted to go back and punch in a few bars, the engineer could grab the in and out of all 8 tracks of the punch in and easily line up the in point to a precise location, as well as trim the out.
Maybe I need to break out the manual again, but in Logic, I can set the locators, but only see the button where I can "cut" that selection, and am not sure if it's possible to move all the tracks around.
Anyway...thanks for any direction here.

Hello JAYUSBEEUS,
"iMovie is meant to work with firewire connected miniDV camcorders"
HDD camcorders record in MPEG format which is not accepted by iMovie. If you were to buy one of these cameras, you would have to convert all your recorded video to DV format before being able to edit it.
If you want to be able to edit your videos on your mac, your best choice is a MiniDV camcorder. Sony, Canon, and Panasonic have several models in your pricerange. My personal favorite is the Panasonic GS500, a 3-chip camcorder with very good pic quality at a reasonable price. In order to browse through some unbiased reviews go to www.camcorderinfo.com - maybe start reading here:
The 10 questions to ask when buying a camcorder
http://www.camcorderinfo.com/content/10-Questions-to-Ask-When-Buying-A-Camcorder .htm
And also here: Which camera to buy and why
http://discussions.apple.com/thread.jspa?threadID=523995&tstart=0
hope this helps
mish

Similar Messages

Is there anybody who know about editing multiple tracks, particularly about taking out sections of all tracks?

When a track has space between video clips, the split clip allows the "delete and close gap" to go past the CTI. The delete leaves me to move the tracks manually, thereby loosing the alignment I worked so hard to create.

Bill
I have reviewed the entire thread several times. The the following is my current understanding based on your most current posts. Please let me know if I have interpreted what you wrote correctly.
You are doing 3 tracks multi-camera editing using Premiere Elements 12, with each track scene the same but each from a different angle (all 3 in sync for the moment depicted). Based on which track content is on top, you are going along deciding what is to be seen by "removing" the appropriate clip(s). And, as you do that, unwanted clip movement is occurring which is messing up your in sync multi-camera editing alignment.
I suspect all this started when you decided to use Delete and Close Gap and found that you could not on any video track other than Video Track1. It appears that you found "Cut" was an option. You do not want "Cut" in this instance, you want "Delete", and any clip movements should be made with clips as a group and/or individually with the Ctrl key or Alt key of the computer main keyboard held down as you do that.
Right now I am not understanding how Snagit got into the workflow. But, the bottom line is, if you have a strategy that works for you, please go with it. I will stay with you in this task until you succeed. As a backup, you may want to keep a copy or copies of the project with the track alignment in tact.
If I am correct in my understanding of the multi-camera editing aspects of your task, I would ask you to think about (at the right time) using Opacity of clips rather than cuts to decide what is to be shown and not shown. Select a clip, go to Applied Effects Tab/Applied Effects Palette/Opacity Panel expanded. For those clips you want to see 100% Opacity, for those you do not want to see Opacity 0% instead of a cut out.
As for the matter of Set In and Set Out points, I suspect that the Adobe rep was referring to the following splitting of clips in the Preview Window of the project. But, I do not see that as the way to go for this particular task.
ATR Premiere Elements Troubleshooting: PE11: Project Assets Organization for Scene and Highlight Grabs from Collection o…
If you think a screenshot of your opened tracks would help me focus better into your project, please post one, especially if you think that we are not yet in sync.
Thanks.
ATR

Adobe Photoshop Elements 12 for Mac does not show up in Applications. Tutorial for editing from iPhoto shows selecting the Adobe software in Applications. Am I missing a step in registering product?

Adobe Photoshop Elements 12 for Mac does not show up in Applications. Tutorial for editing from iPhoto shows selecting the Adobe software in Applications. Am I missing a step in registering product?

I answered my own question: There's a difference between "download' and "install." Hunt for "install" (1.5 hrs in my case) and line up your passwords, Adobe ID, etc, then install. Took 15 min. The right choice shows up in Applications. Now it's on to figuring out why photo selected for edit in iPhoto does not show up on screen in Elements.

Where can I find a tutorial for editing iMovie on iPhone 4S

Where can I find a tutorial for editing iMovie on iPhone 4s

http://support.apple.com/kb/ht4174
and:
http://www.apple.com/iphone/from-the-app-store/apps-by-apple/imovie.html

Is there a video tutorial for using cyberduck and iweb?

So, is there a video tutorial for using cyberduck and iweb to upload to a website? The written instructions on iweb are not specific enough.

Might be worth posting that in the iWeb forum.
http://discussions.apple.com/category.jspa?categoryID=188
This is the iPhoto 09 forum.
Also, have you tried searching with google?
Regards
TD

Is there a simple tutorial for Garageband?

Is there a simple tutorial for Garageband?

Mac 101: GarageBand
http://www.apple.com/ilife/video-showcase/
Type "Garageband" into the search bar at the top of this page by "Support"

Is there an online tutorial for IPhone 4?

Is there an online tutorial for using the IPhone 4? I just got one and could use some help to get started with it.

http://www.apple.com/support/iphone/

Is there a good tutorial for copyeditors new to InCopy?

I have several copyeditors who have been making text changes to InDesign files in hard-copy markup. We want to give InCopy a try. What's a good tutorial for the editors that won't get them bogged down in anything but how to make text changes?

There are a few chapters specifically for editors new to InCopy in my InDesign/InCopy Collaborative Workflow videos for lynda.com (http://j.mp/lynda-incpy)
4. InCopy Editing Essentials
Working with the Assignments panel
Editing in Layout view
Editing in Story or Galley view
Copyfitting text
Inserting special characters
Importing text
Working with read-only layouts
5. Formatting Text in InCopy
Applying styles for copyfit
Applying local character formatting
Applying local paragraph formatting
Splitting and spanning columns
Using the Eyedropper tool to copy/paste formatting
6. Useful InCopy Tools
Checking spelling
Using the language dictionaries
Using the thesaurus
Using Find/Change
Working with the Autocorrect feature
Building text macros
Using inline notes
Working with built-in scripts
7. Advanced Text Editing in InCopy
Adding footnotes
Using conditional text
Creating hyperlinks
Inserting cross-references
Working with tables
8. Tracking Changes in InCopy
Setting up and using Track Changes
Customizing the markup
Accepting and rejecting changes
If you don't have a lynda.com subscription, you should! So worth it. Or you can use this for a free week's trial: http://lynda.com/freepass/amconcepcion
Anne-Marie
InDesignSecrets.com

Is there a recommended size for photos used in Keynote?

I'm creating a slide presentation for our leadership program's graduation showing in photos all the activities. Is there a recommended size (in pixels or dpi) for full slide photos?

It really depends on the size of the screen that the presentation will displayed on. If the file size of the Keynote doc is not an issue you can make the resolution (in px) as large as you care to.
DPI is not relevent since it is used for print.

HT5225 is there a video tutorial for the dyslexic?

i don't have the time nor attn span to read thru all this -- is there an available tutorial?
Surely someone at APPLE has been wise enough to make e video explaining all this, right?

Welcome to the Apple Community.
I don't believe there is a video unfortunately.
If you haven't moved to iCloud or saved everything from your iDisk by midnight tonight, you will lose it all, so you need to do it now.
Have you got a mobile me account.
If so have you migrated to iCloud.
Do you use your iDisk
Do you host a website on Mobile me
Do you have photos or video on Mobile Me
Answer these questions and we will gladly help you do what you need to before midnight.

HT4321 I have tried the recommended remedies for the magic track pad and it is still erratic, any other suggestions? Is is defected?

I have tried the recommended remedies for the erratic behavior of the Magic Trackpad and the problem continues? Suggestions? Is the product defected?
Thank You

It sounds like you disabled the guest network from your AirPort Express using AirPort Utility.....but you did not delete the network from the stored settings on your Mac.
We have no way of knowing what the "various instructions given by other members" might have included, but if you have not already done so on your Mac......
Open System Preferences (gear icon on the dock)
Open Network
Click on Wi-Fi on the left
Click Advanced at the lower right
Here you will see a list of networks that your Mac has joined in the past
Click on the name of the guest network to highlight it
Click the - (minus) button at the bottom of the network list to delete that entry
Do the same if there are other networks that you no longer need
Click OK at the lower right of the window
Click Apply at the lower right of the next window
Close the windows
Open Macintosh HD > Applications > Utilities > KeyChain Access
Locate a listing with the name of the guest network
Click on that listing to highlight it
Click the Delete key on your Mac
Click Delete in the window that appears
Close the windows
Restart your Mac now

Is there a plug-in for editing web pages in Firefox (or how to otherwise edit in Firefox?

When opening an .htm/.html file in Internet Explorer to view and/or edit, I can view the source code and choose an editing program (I use Windows Notebook as my default just because it is quick and easy). Can I edit source pages directly from the Firefox browser, or 'link' to Notebook, or . . . to accomplish the same task?
I have other editing programs on my machine, but they either are clunky or require hoops to be jumped through to do my 'hand' editing. The way I have been doing it for many years is quick and easy, and doesn't require me to open more than one program to accomplish my task. This saves a lot of time when I have multiple pages to edit and/or a lot of 'picky' changes to make.
Thanks, Ed Hansen, Seattle WA, [email protected]

Open new tabs on far right, restore pre Fx3.6 behavior, set '''browser.tabs.insertRelatedAfterCurrent''' to '''false''' in '''about:config'''
For more information see item #36 in ...
You can make Firefox 4.0.1 look like Firefox 3.6.17, see numbered items 1-10 in the following topic [http://dmcritchie.mvps.org/firefox/firefox-problems.htm#fx4interface Fix Firefox 4.0 toolbar user interface, problems (Make Firefox 4.0 look like 3.6)]
'''''More information on configuration variables''' available in
[http://kb.mozillazine.org/About:config_entries about:config (entries)] and for users not familiar with the process there is [http://kb.mozillazine.org/About:config about:config (How to change)] -- Specialized list of only [http://dmcritchie.mvps.org/firefox/tabs_config.htm Tabs configuration] variables.''

Workflow for editing multiple size projects

Hi,
I work for a digital design agency and we often produce edits that are for multiple sized placements on websites. For example we may have one for an MPU (300x250), another for a leaderboard (728x90) and so on.
The problem I've found, and there doesn't seem to be a good solution for, is that Premiere Pro doesn't allow a project setting to be changed after the fact.
The only solution I've found is creating a new project at the required size, importing the sequence in and rendering from that, and I was wondering if there's a better workflow?
Somebody suggested using AE to do everything, but it seems to make more sense to me to use the editing app to do the editing. One problem with the workaround is that the sequence just comes in as a single block apparently, it doesn't keep the edits separate. And sometimes I might want to tweak the edit for different placements.
It all seems a bit convoluted at the moment, and I'm just trying to figure out a streamlined workflow for producing edits to multiple sizes.
Thanks,
Steve

Hi,
it has to go to quicktime I'm afraid - I've questioned this myself, but basically it goes to another authoring company who encode to flash, host the site etc.
Normally I do it as uncompressed or animation at highest quality.
Yeah, the encoding doesn't take long - just trying to feel around the best way to do this - trying to get something that's composed for one aspect ratio to work in a completely different one is more of a bottleneck than the actual encoding.
I may be mistaken, but I'm sure older versions of Premiere allowed the project settings to be changed at any point.
Thanks,
Steve

Is there a recommended "order" for displaying CSS shorthand attributes?

When using shorthand (for background tags, for example) is
there a
"preferred" or "recommended" order of displaying the
attributes?
background: url(filename.jpg) no-repeat left top fixed
background: no-repeat left fixed top url(filename.jpg)
etc.

It's safer to assume that the order is important than to
assume that it's
not. Try giving the font style a random order, for example.
Or the list
style....
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"Jay" <[email protected]> wrote in message
news:evlt6n$mcm$[email protected]..
> "Murray *ACE*" <[email protected]>
wrote in message
> news:eviupm$t4o$[email protected]..
>> It does matter, in general. Make sure you check out
what the order
>> should be for the style you are using, in DW's
Reference panel.
>
> O'REILLY CSS Reference | Style: background
> Value: Any combination of the five background-style
attribute values, in
> any order.
> Example: body {background: url(watermark.jpg) repeat
fixed}
>
> I realize the order matters if you're specifying margins
or borders
> (left-right-top-bottom) but for the background selector
it doesn't appear
> to be a factor, according to DW's Reference panel.
>

Speaker recommendations wanted for editing in Premiere Pro CC

For several years I have been using a pair of M-Audio near field speakers that were recommended to me for video editing. Apparently, these speakers are widely used. However, I find their sound to be incredibly flat and midrange, with few highs or lows. Lately, I have been getting some unpleasant surprises when listening to my mixes on other speakers or devices; I often hear undesired high and low frequency sounds that I never heard in my studio. This happens even when listening on such lowly gear as iPhone ear buds! The other day I was listening to a mix with a pair of Apple buds and heard distant voices in a rural ambience clip that I never heard on the M-Audio speakers.
Can anyone recommend a better pair of speakers?

Thanks Richarad ..It has solved the problem but still crashes some times .As the programme has the break (bumper)after every five minutes ,i hope it will not compress bumper time too after export.

Is there a recommended tutorial for editing multiple track regions?

Similar Messages

Maybe you are looking for