Is there a temporary disconnect option for Prepaid?

We live in the USA half a year and in Canada the other half. In an effort to downsize to two phones, we are planning on cancelling our Canadian plans. We just got my wife a Prepaid and activated it complete with phone number and all. After reading about the potential for massive bills when data roaming in Canada, we are now hesitant to use this phone up there for the six months. A least our other phone here is a Pay-as-you-Go non-smart phone so we'll use it in Canada occasionally to place calls and pay the 69 cents a minute. We'll get a pay-as-you-go in Canada for my wife.
My question then - can one temporarily suspend our service but since we're only gone six months keep our number and avoid a reactivation fee? It's pointless to pay $45 a month just to keep a number when the phone will be shut off. What is the activation fee?
Thanks.

Hi,
can one temporarily suspend our service but since we're only gone six months keep our number and avoid a reactivation fee? It's pointless to pay $45 a month just to keep a number when the phone will be shut off. What is the activation fee?
If t's prepaid, there's not activation fee.
If you don't want to use it, just don't pay. You'll have 3 months before losing the number.
You can pay 5$ and it gives you one month to use it.
If it's a basic phone you can have the "Pay as you go" plan minimun payment 5$ a month, 25 cts per min. You can change the plan whenever you want.
If you lose the number you can always activated the phone again with a new number.
Hope this helps.
BB.

Similar Messages

  • Is there a command line option for VNC to automatically launch in fullscreen mode?

    I can launch a VNC window from the command line, as such:
    open vnc://username:password@hostname
    ... but I'd like it to automatically start in full screen mode. Is there a command line option for this?
    I'm using an old MacMini purely to connect to another Mac over screen sharing, but when the MacMini boots I'd like it to go straight into the fullscreen of the other desktop.
    Many thanks!

    Set the Integer pref browser.sessionstore.max_resumed_crashes to 0 on the about:config page to get the about:sessionrestore page immediately with the first restart after a crash has occurred or the Task Manager was used to close Firefox.
    * http://kb.mozillazine.org/browser.sessionstore.max_resumed_crashes
    That will allow you to deselect the tab(s) that you do not want to reopen, but will allow to reopen other tabs.
    See:
    * http://kb.mozillazine.org/Session_Restore#Restoring_a_session_after_a_crash
    * http://kb.mozillazine.org/Browser.sessionstore.max_resumed_crashes

  • How can I purchase and download the standalone LR6 here at Hong Kong?  There's no such option for me instead of forcing me to use the CC!

    How can I purchase and download the standalone LR6 here at Hong Kong?  There's no such option for me instead of forcing me to use the CC!

    Try this link:
    http://www.adobe.com/products/catalog.html
    Otherwise I suggest you contact your local office for help:
    Hong Kong office
    Suite 4102, 41/F
    The Lee Gardens
    33 Hysan Avenue
    Causeway Bay
    Hong Kong
    Tel: +852 2916 2100
    Fax: +852 2970 2277

  • HT2589 My account is blocked out. I registered my account for Russia because there was no that option for Ukraine. And now I can't do any purchasing, because apple store want's another payment option. What should I do? Ps my friends here has such a proble

    My account is blocked out. I registered my account for Russia because there was no that option for Ukraine. And now I can't do any purchasing, because apple store want's another payment option. What should I do? I have many apps on my account but I can't do even updating.  Ps my friends here has such a problem too

    Ukraine is there. It's been there for a while. I even see it now.

  • Is there good project management options for OS X server?

    We are a small (3 person) shop and want to host our own project management solution. We would love to share project info and assign tasks etc... Does anyone do thin on their own server? We have used Manymoon and now Do.com.

    There are a few options for self hosted project management you can consider, but most are considerably more complicated to use than either Do or Manymoon.  Here are some examples of things you can look at, in order of declining 'project management' competence.  For each item there are others available I've not mentioned, but if you search for any of these you'll soon find the alternatives via Google.  So, have a look at:
    * Merlin - A full featured project management package a bit like MS Project, but runs native on OS X and has pretty functional iThing clients too (though they don't yet support iOS7...).  Quite expensive - but each client has the ability to share projects across a LAN (or WAN), so you can do stuff without buying the server app (which is very expensive).  Steep learning curve for app.  http://www.projectwizards.net/en/
    * ActiveCollab - a self-hosted php based groupware portal system.  Originally started as an open source competitor / complement of the earliest forms of Basecamp, it has long ago evolved into its own thing but filling broadly the same space.  Requires an Apache2/MySQL/PHP installation to run, and allows the sharing of information about projects, along with a fairly complex project management capability.  All the pros / cons of web based service apply.  Much easier to learn to use, and deploy than Merlin.  https://www.activecollab.com
    * Studiometry - a different take on the problem, this is an attempt at a whole-business management app for small firms, covering everything from sales pipeline tracking through to simple CRM and invoice management.  Has the ability to share files related to projects, and allocate / track tasks within a group.  Has clients for OS X, Windows and iOS.  As with Merlin, has network sharing abilities built into each client, so no need for a 'server' to make it work, but in practical terms you need an 'always on' copy to act as hub for an office.  http://oranged.net
    * BusyCal - a much simpler solution, but if you are looking to replace Do.com then it might be all you need.  Allows you to share calendar / task information on a LAN, and offers somewhat enhanced calendar functions to regular OS X.  http://www.busymac.com/busycal/
    HTH

  • How to create apple id for mac app store without using credit card and there is no any option for payment none. please tell how to download free apps from mac app store

    how to create apple id for mac app store without using credit card and there is no any option for payment none. please tell how to download free apps from mac app store

    my problem solve by me
    first create apple id
    fill credit card details
    and complete your account creating  process.
    than go to app store or itune store
    login your acount
    click right side  - account button
    than again login for account setting
    next go to payment information and click edit button
    when u enter payment infomation
    click none button in payment method and click done button.
    than ur credit card has been removed.
    but rs. 60 will deducted in your account when u doing this process.

  • 1.call information such as call waiting,call forwarding, call holding is not working when caller the call me or im wait for my call i cant see any title by iphon , and also holding is the same.2. there is not any option for call baring.

    Hi. please solve my problem.
    .call information such as call waiting,call forwarding, call holding is not working when caller the call me or im wait for my call i cant see any title by iphon , and also holding is the same.2. there is not any option for call baring.3.playback music is not hearing by second partner during the call.4.i cant select ringing ton from saving tons.
    thank you in advance.

    Hi Ersin,
    Exception 1 would seem to be FORMATTING_ERROR, which suggests something in the design of the Smartform.  However, that doesn't fit with the form being generated from a report, but only erroring when called from a function module.  I can think of no reason why the different calling method would be a factor.
    When FORMATTING_ERROR is raise it should also set a message ID and number, are you able to determine what they are?
    Regards,
    Nick

  • If we dont want to use sleep/wakeup button for dissconnect the call so there is any other option for dissconnect the call without using sleep/wakeup button in ios 8.1.3. kindly suggest

    if we dont want to use sleep/wakeup button for dissconnect the call so there is any other option for dissconnect the call without using sleep/wakeup button in ios 8.1.3 . kindly suggest..!

    Hello kumar kalptaru, 
    Thank you for participating in the Apple Support Communities. 
    It sounds like you're wondering how to hang up a call besides using the Sleep/Wake button. 
    Other than this, you can tap the red hang up button on the Phone app. See the iPhone User Guide for more help:
    While on a call - iPhone
    End a call. Tap  or press the Sleep/Wake button.
    Best Regards,
    Jeremy 

  • HT2534 I have just created an Apple Id for itunes, it is allowing me to get to the debit card stage but they no longer accept Visa Debit, there is no other option for me as i dont have any other cards and there isnt a 'none' option! HELP!!

    I have just created an Apple Id for itunes, it is allowing me to get to the debit card stage but they no longer accept Visa Debit, there is no other option for me as i dont have any other cards and there isnt a 'none' option! HELP!!

    How did you create the account ? Unless you followed the instructions on the page that you post from exactly then you won't get the 'none' option and you will need to enter payment details - those instructions won't work on existing accounts.
    I tried those instructions a week ago in response to another thread and I got the 'none' option on it e.g. on my computer's iTunes I logged out of my existing account, found a free app in the store, clicked on its 'free' price, clicked on 'create Apple id' on the popup, and after agreeing to the terms and filling in my details I was able to select 'none' as my payment option and download a free app with it.

  • HT1918 There's no none option for my payment method ?d

    How come there's no "none " option for my payment method?

    It may be that there is a balance on your account that needs to be taken care of before you can remove a credit card. If you are trying to create an account with a "none" option, see most of the threads to the right under "More Like This" including https://discussions.apple.com/thread/3929942

  • I CANNOT change my phone number to an sms capable number to set-up keychain.. I have tried everything. My mobile is stuck set to @icloud and my mac to stuck set to @me and there aren't any options for changing anything. Any help appreciated.

    I CANNOT change my phone number setting to an sms capable number to set-up keychain.. I have tried everything. I am on a Mac OSX, Mavericks upgrade and an iPhone 5. My mobile is set to @icloud and my mac is stuck set on @me and there aren't any options for changing either my phone number, account, details or anything. I simply want to set-up keychain and receive an sms to my mobile and not to my sms non-compatible home phone number. Any help sooo appreciated.

    On your Mac, Sign Out of iCloud, then Sign In with the ID you want to use.

  • I can't use my apple id ,stuck at review payment there is no None option for payment

    when i login it says your account is not reviewed at stores ,when i click review my account its asking for payment method i dont want to give my card details
    i can't use my apple id ,stuck at review payment there is no None option for payment .

    Hi!
    I'm stuck with similar problem.. I recently started using apple products and because I mostly use my macbook for writing, I didn't use iTunes. One day I managed to get FaceTime to chat with friends and therfore I had to create an apple id. Everything went smoothly until I tried to use iTunes Store with my iPod. iTunes asks me to review my account and although it is fully functional I cannot change any detail because I don't own a credit card, and therfore cannot get any free app!
    What is funny, when it comes to creating an account through iTunes, there is an option 'None' in Credit Card section. When I try to do the same using my existing account it simply doesnt't let me do this.
    I need a solution to set it properly or an option to permanently delete existing account and recreate it using iTunes. Using another email account is not an option e.g. creating another account must be done with the same email as the one I used for the current account.
    I was looking for an answer but with no luck. Apple submitted great tutorials for creating accounts but didn't supply users with answers for problems like mine(which apparently is very common!).
    If there is anyone from Apple reading such posts, I'd be happy to see a solution for this problem.
    Thanks

  • Is there no external power option for new MacBook pro with dual core?

    Is there no external power option for a MacBook pro 17 with dual core. Apparently apple doesn't offer one and I can't ind any who does

    Courcoul wrote:
    Given that the stumbling block to more flexible power options is the infamous patent-protected MagSafe connector
    The funny thing is, I've seen loads of cheap "replacement" MagSafe adapters on eBay, Amazon and in local shops. On eBay, they cost (new) about $26, on Amazon I've seen them as cheap as $17!!, against the $80 that Apple charges. And apparently, it's not worth it to pursue the matter, it's been going on for more than a year now.
    made of pure unobtanium and guarded by packs of rabid lawyers, someone is shooting themselves in the foot by making the power bricks so frail that the secondary damaged goods recovery market grows without bounds...
    I really dig that unobtainium reference :-)
    What I've found is that the bricks aren't so frail but the DC cord is! Apparently that's difficult to make resilient, with the characteristics that Apple wanted them to have. Out of every ten broken MagSafe adapters I've seen, only two actually have failed electronics, five have frayed DC wiring and three have a broken MagSafe connector.

  • Is there a pre-payment option for the iPad 4G LTE?

    Hello Everyone,
      I was told that the iPad has a pre-payment option. However, when I talked to a few operators (I got dropped twice, thanks to ATT), but all of them had mentioned a pre-payment option. The reason why this interests me is because I am a very frugal person so I like the idea that I don't have to use all my data allowance all in that one month. What I had been told was that I can actually purchase 3gigs of data, pay for it, and not have to worry about that sneaky recurring, monthly payments. In addition, I was told that there is no expiration date for that 3gigs, and that if it takes me three months to go through the 3 gigs, then I am allowed that time. Versus the regular monthly plan that has no rollover. If you don't use the 3 gigs by the month's time, you lose it. I would so prefer to have the pre-payment option therefore, since I can use up every last kilobyte, instead of conserving only to have the next month arrive and lose whatever I had.
    I hope this is clear.
    Thank you for reading everyone!

    You can download a copy of  AT&T 3G Data Plans for Apple iPad
    http://www.att.com/Common/about_us/files/pdf/emerging_devices/iPad_fact_sheet_08 1210.pdf
    There's no plan like you describe.
     Cheers, Tom

  • Windows 8.1 do not show DISCONNECT option for VPN, why? bug? Please fix!!!

    I created a VPN connection. Once I connected to the VPN in Windows 8.1, it does not show DISCONNECT option when I click on the VPN again. It just keep showing CONNECT option only. Why? This has to be a bug! Please fix!

    Hi Dan5678,
    Is the connection an incoming VPN connection?
    If yes, then you may take a look at the KB article below:
    How to disconnect an incoming VPN connection in Windows 8 and in Windows Server  2012
    To disconnect an incoming VPN connection, follow these steps:
    Open Network Connections. To do this, use either of the following methods:
    Swipe in from the right edge of the screen, or point to the lower-right corner of the screen, and then click Search. Then, type ncpa.cpl, and then click the Ncpa.cpl icon.      
    Press Win+R to open the Run window, type ncpa.cpl,  and then  click
    OK.
    Right-click the incoming VPN connection that you want to disconnect,  and then  click
    Status.
    On the General tab,  click Disconnect. 
    Close Network Connections.
    Hope this may be helpful.
    Regards
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Maybe you are looking for

  • How to Change the Value Field Type of a Value Field

    Hi, How can I change the value field type from Currency to Quantity of a value field? I have tried to do it in KEA6. I can change the value field and its description, but not the value field type from currency to qty. If I change this config, is ther

  • Accessing Oracle 10g Express with the SqlDbx IDE

    Hi, I downloaded Oracle Express a few weeks back. I finally got round to doing something with it. I also installed a free IDE called SqlDbx that I was recommended. When I start up SqlDbx it prmpts me for DBMS Type - I select Oracle Server from a drop

  • Cant get contacts and calendars to sync to ipod nano

    when I sync my nano to my macbook itunes, all music and photos copy, but my contacts and calendars (selected) look like they copy, but when done, the nano does not have any contacts or calendars. this happened occasionally for a while, but now it nev

  • HT5312 How do I change my original email address which is no longer active?

    I cannot access any i apps since my original email is no longer active, how do I update my email address?

  • Odd address when I send email to a contact

    Normally when I address an email to someone in my address book, I start typing their name in the cell marked "To" and it automatically fills in their address. When it's complete, the only thing that appears in the "blue capsule" in the "To" cell is t