Is there a test to verify the current running version of firefox is valid
Is there a web site or application that can verify the running version of Firefox?
See the Help > Troubleshooting Information page.
*https://support.mozilla.org/kb/Using+the+Troubleshooting+Information+page
*Firefox > About Mozilla Firefox
You are currently running Firefox 13.0.1 and that is not the latest Firefox 15.0 release according to the user agent in the system details list.
*Mozilla/5.0 (Macintosh; Intel Mac OS X 10.6; rv:13.0) Gecko/20100101 Firefox/13.0.1
If there are problems with updating then easiest is to download the full version and trash the currently installed version to do a clean install of the new version.
Download a new copy of the Firefox program and save the disk image (dmg) file to the desktop
*Firefox 15.0.x: http://www.mozilla.org/en-US/firefox/all.html
*Trash the current Firefox application (e.g. open the Applications folder in the Finder and drag the Firefox application to the Trash) to do a clean (re-)install
*Install the new version that you have downloaded
*https://support.mozilla.org/kb/Installing+Firefox+on+Mac
Your profile data is stored elsewhere in the Firefox Profile Folder, so you won't lose your bookmarks and other personal data if you uninstall and (re)install Firefox.
*http://kb.mozillazine.org/Profile_folder_-_Firefox
Similar Messages
-
I recently updated from Firefox 7 to Firefox 8.
Until version 7 the test framework I use, based on Selenium, was working normally with the browser. Since I updated to version 8 - the framework can't open any browser session. So I had to downgrade to older version to be able to run my tests. But the only older version than 8 was 3.6 - really stable but very, very old one.
So I need to choose to work with any version between 3.6 and 8, excluding 8 for now.
How can this happen from the Firefox site?Nice try, but this url does not work anymore 10 Dec 2011. Are we ever going to have an answer as to why all versions before V8 were dropped off the map back to 3.6? Is 3.6 secure?
-
PPoint OWA there was a problem verifying the certificate
Hi, I installed Lync 2013 FE, edge and ARR. Recently, with your help, I finally made it work for web based meetings. People have A/V/Whiteboard/ but they are unable to use Share screens and PPoint.
I read that I need Office Web Application Server in order to make PPoint work so I followed online tutorial and installed it. As a certificate I at first used self signed but later as I added owa as SAN, I exported it from edge server and imported it in
OWA Server. I am not sure if this is the way to do that.
Error for share screen is that it is due to the network issues,
Error for PPoint is "There was a problem verifying the certificate". Remote user use web browser in order to access meeting, upload the file without any problem, and it says Loading ..... , on the other side I have domain machine with lync client
that receives notification to accept meeting content, after which error appears.
Any ideas?Hi all and thanks for your reply.
I used this command to create farm (didn't define internal fqdn)
New-OfficeWebAppsFarm -ExternalURL https://lynweb.domain.com -CertificateName "ExternalCert"
Everything went smoothly, I can access
https://owa.domain.local/hosting/discovery (but cert is shown as unsecured since url is not the same as in cert (Lyncweb.domain.com).
Because I have split DNS, in my DNS I created lyncweb for the domain.com CNAME entry and I can successfully open https://lyncweb.domain.com/hosting/discovery form LAN.
I found several mistakes in my config (at least I think so):
1. In LyncFE I had under discoveryURL domain.local path, so this is why cert error was showing. It was able to access but because of the different URLs name that didn't match certificate name, I was getting an ssl error. - I changed it to lyncweb.domain.com/.....
2. I didn't have external DNS name for lyncweb.domain.com. In fiddler I saw that it is trying to access to this URL and since it wasn't defined- therefor not able to access. - I created A host record.
3. Firewall, since lyncweb was defined in ARR I needed to craete FW rule to let access OWA Server. - I added FW rule.
Current situation is this:
-- When I access through meeting.domain.com/Lync Client and start PPoint, on the remote client (teleworker where I started PPoint) presentation pops up on teleworker, I can go through the slides, but inside the LAN (second participant) on Lync Client or
via meet.domain.com I am just getting "Loading ...." and nothing appears. (I tried disabling Firewall but didn't help - so it is not about firewall, especially since OWA and LyncCLient are in the same subnet)
-- On the other hand when teleworker starts presentation and guest joins (both outside LAN), both can see presentation.
I thought that it is because I didn't have internal URL, so I added
-InternalURL: https://lyncweb.domain.com
Now I have both internal and external URL that is the same. But it didn't change the situation.
Any suggestions? -
CA issue - Workstation signin "There was a problem verifying the certificate from the server"
Hi,
We have issues with all workstations on our domain. I just recently setup Lync 2013 server on a windows 2012 OS. When I went to test sign-in, I received a message "There was
a problem verifying the certificate from the server". To fix this issue, I had to download the cert and import it into Trust Root Certification Authorities on the local workstation. This will be impossible if I have to do this for multiple machines.
Is there a way around this? Why is it asking to do this?
Thanks guys, much appreciated.
MMYou can follow the instructions here to use Group Policy to install your root certificate to all your workstations.
Or you could re-deploy your CA as an Enterprise CA.
Hi Georg,
Thank you for your reply.
I did deploy my CA as an Enterprise CA..... Not sure why its still asking me to install on workstations?
How can I confirm its an Enterprise CA?
Thanks,
MM -
Local USB "There's no media in the current folder"
Hi Forum, I have a no media in current folder error with my WDTV Plus. I searched the forum and googled for hours but everyone seems to have this problem with network streaming or the suggestions don't work for me. My media is on a Seagate 3TB USB Drive which is connected directly to the WDTV, no ethernet cable in use, everything local.This setup worked for three years now. Two months ago, some subfolders began to have the "no media" error, but most of the files worked. Now I get this error in the root and I am not able to play a single file.The USB drive is formatted with ntfs. What I noticed:- I also get an error when I choose USB Storage in the menu (right before it would show the folder structure where now the no media error appears). It says "Unable to create media library. check your storage setting".- the .wd-tv folder in the root of the disk always has the last changed date 01.01.2000, all other files have timestamps from the last 3 years.- When I go to file management on the wdtv I can see all my files and folders. I can even delete and copy them around. What I've done so far:- Updated to the newest firmware, nothing changed.- Plugged my USB disk to my laptop and checked it for errors. This took 48 hours and there where 0.0% errors, destroyed blocks or something.- Played around with the folder structure, copied files to other folders... I also read that there has to be at least one media file in every subfolder, otherwise wdtv would come up with the no media error. So I did this -> nothing changed.- Deleted the .wd-tv folder on the disk many times. Played around with the "create media library" setting on the wdtv. It can create a media library (the .wd-tv folder), despite the error "unable to create media library".- Permissions on all folders and subfolders on the USB drive are full control for everyone.- When I plug in a 16GB usb flash drive with some video files on it everything works fine. could it be that there are some currupted files that wdtv can't read? If so, how could I detect them?Has anybody occured the same sort of problem? Thanks in advance,Sandro
Hi,
See if the following link helps.
http://community.wd.com/t5/WD-TV-Live-Live-Plus/quot-There-is-no-media-in-the-current-folder-quot-Oh-yes-there/m-p/291008#M25793 -
There was a problem verifying the certificate from the server
i can not sign in to my lync server in client user and the error message is "There was a problem verifying the certificate from the server".
i can sign in in my lync server by any account but i can not sign in in other pc clients.Hi,there,
Just some additional info...
Please go through the following old threads with the same error message
http://social.technet.microsoft.com/Forums/en-US/ocscertificates/thread/19d74620-9ea8-4f19-bc01-25387e4ee380/
http://social.technet.microsoft.com/Forums/en-US/ocscertificates/thread/7a973094-6cd1-4f3f-9af0-6d330a9b8428
http://social.technet.microsoft.com/Forums/en-US/ocscertificates/thread/4034e791-6c3c-4c35-b936-bca734204fd4/
Hope these helpful!
B/R
Sharon
Sharon Shen
TechNet Community Support
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. -
How to verify the current connections on a firewall?
I am a new computer support specialist in a small company. We would like to focus on network security. How can I verify the current connections on a PIX firewall? We would like catch malicious behavior while it's occurring. How do I inspect all the connections going through our firewall - both in and out. My focus is on anomalies and investigate them; this could include outbound FTP or inbound Telnet/SSH sessions. We have a Cisco perimeter router, which functions as the company firewall. A PIX firewall sits behind the router and its sole function is to build and terminate IPSEC tunnels. I would appreciate any advise.
Thanks.
SaidHi Said
"sh crypto isa sa" will show all the IPSEC phase 1 connections to your pix.
"sh crypto ipsec sa" will show all the IPSEC phase 2 connections to your pix.
"sh conn" will show all the connections that have been allowed through your pix.
HTH
Jon -
Team , Thanks for looking into this ..
As a last resort on optimizing my stored procedure ( Below ) i wanted to create a Selective XML index ( Normal XML indexes doesn't seem to be improving performance as needed ) but i keep getting this error within my stored proc . Selective XML
Index feature is not supported for the current database version.. How ever
EXECUTE sys.sp_db_selective_xml_index; return 1 , stating Selective XML Indexes are enabled on my current database .
Is there ANY alternative way i can optimize below stored proc ?
Thanks in advance for your response(s) !
/****** Object: StoredProcedure [dbo].[MN_Process_DDLSchema_Changes] Script Date: 3/11/2015 3:10:42 PM ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
-- EXEC [dbo].[MN_Process_DDLSchema_Changes]
ALTER PROCEDURE [dbo].[MN_Process_DDLSchema_Changes]
AS
BEGIN
SET NOCOUNT ON --Does'nt have impact ( May be this wont on SQL Server Extended events session's being created on Server(s) , DB's )
SET TRANSACTION ISOLATION LEVEL READ UNCOMMITTED
select getdate() as getdate_0
DECLARE @XML XML , @Prev_Insertion_time DATETIME
-- Staging Previous Load time for filtering purpose ( Performance optimize while on insert )
SET @Prev_Insertion_time = (SELECT MAX(EE_Time_Stamp) FROM dbo.MN_DDLSchema_Changes_log ) -- Perf Optimize
-- PRINT '1'
CREATE TABLE #Temp
EventName VARCHAR(100),
Time_Stamp_EE DATETIME,
ObjectName VARCHAR(100),
ObjectType VARCHAR(100),
DbName VARCHAR(100),
ddl_Phase VARCHAR(50),
ClientAppName VARCHAR(2000),
ClientHostName VARCHAR(100),
server_instance_name VARCHAR(100),
ServerPrincipalName VARCHAR(100),
nt_username varchar(100),
SqlText NVARCHAR(MAX)
CREATE TABLE #XML_Hold
ID INT NOT NULL IDENTITY(1,1) PRIMARY KEY , -- PK necessity for Indexing on XML Col
BufferXml XML
select getdate() as getdate_01
INSERT INTO #XML_Hold (BufferXml)
SELECT
CAST(target_data AS XML) AS BufferXml -- Buffer Storage from SQL Extended Event(s) , Looks like there is a limitation with xml size ?? Need to re-search .
FROM sys.dm_xe_session_targets xet
INNER JOIN sys.dm_xe_sessions xes
ON xes.address = xet.event_session_address
WHERE xes.name = 'Capture DDL Schema Changes' --Ryelugu : 03/05/2015 Session being created withing SQL Server Extended Events
--RETURN
--SELECT * FROM #XML_Hold
select getdate() as getdate_1
-- 03/10/2015 RYelugu : Error while creating XML Index : Selective XML Index feature is not supported for the current database version
CREATE SELECTIVE XML INDEX SXI_TimeStamp ON #XML_Hold(BufferXml)
FOR
PathTimeStamp ='/RingBufferTarget/event/timestamp' AS XQUERY 'node()'
--RETURN
--CREATE PRIMARY XML INDEX [IX_XML_Hold] ON #XML_Hold(BufferXml) -- Ryelugu 03/09/2015 - Primary Index
--SELECT GETDATE() AS GETDATE_2
-- RYelugu 03/10/2015 -Creating secondary XML index doesnt make significant improvement at Query Optimizer , Instead creation takes more time , Only primary should be good here
--CREATE XML INDEX [IX_XML_Hold_values] ON #XML_Hold(BufferXml) -- Ryelugu 03/09/2015 - Primary Index , --There should exists a Primary for a secondary creation
--USING XML INDEX [IX_XML_Hold]
---- FOR VALUE
-- --FOR PROPERTY
-- FOR PATH
--SELECT GETDATE() AS GETDATE_3
--PRINT '2'
-- RETURN
SELECT GETDATE() GETDATE_3
INSERT INTO #Temp
EventName ,
Time_Stamp_EE ,
ObjectName ,
ObjectType,
DbName ,
ddl_Phase ,
ClientAppName ,
ClientHostName,
server_instance_name,
nt_username,
ServerPrincipalName ,
SqlText
SELECT
p.q.value('@name[1]','varchar(100)') AS eventname,
p.q.value('@timestamp[1]','datetime') AS timestampvalue,
p.q.value('(./data[@name="object_name"]/value)[1]','varchar(100)') AS objectname,
p.q.value('(./data[@name="object_type"]/text)[1]','varchar(100)') AS ObjectType,
p.q.value('(./action[@name="database_name"]/value)[1]','varchar(100)') AS databasename,
p.q.value('(./data[@name="ddl_phase"]/text)[1]','varchar(100)') AS ddl_phase,
p.q.value('(./action[@name="client_app_name"]/value)[1]','varchar(100)') AS clientappname,
p.q.value('(./action[@name="client_hostname"]/value)[1]','varchar(100)') AS clienthostname,
p.q.value('(./action[@name="server_instance_name"]/value)[1]','varchar(100)') AS server_instance_name,
p.q.value('(./action[@name="nt_username"]/value)[1]','varchar(100)') AS nt_username,
p.q.value('(./action[@name="server_principal_name"]/value)[1]','varchar(100)') AS serverprincipalname,
p.q.value('(./action[@name="sql_text"]/value)[1]','Nvarchar(max)') AS sqltext
FROM #XML_Hold
CROSS APPLY BufferXml.nodes('/RingBufferTarget/event')p(q)
WHERE -- Ryelugu 03/05/2015 - Perf Optimize - Filtering the Buffered XML so as not to lookup at previoulsy loaded records into stage table
p.q.value('@timestamp[1]','datetime') >= ISNULL(@Prev_Insertion_time ,p.q.value('@timestamp[1]','datetime'))
AND p.q.value('(./data[@name="ddl_phase"]/text)[1]','varchar(100)') ='Commit' --Ryelugu 03/06/2015 - Every Event records a begin version and a commit version into Buffer ( XML ) we need the committed version
AND p.q.value('(./data[@name="object_type"]/text)[1]','varchar(100)') <> 'STATISTICS' --Ryelugu 03/06/2015 - May be SQL Server Internally Creates Statistics for #Temp tables , we do not want Creation of STATISTICS Statement to be logged
AND p.q.value('(./data[@name="object_name"]/value)[1]','varchar(100)') NOT LIKE '%#%' -- Any stored proc which creates a temp table within it Extended Event does capture this creation statement SQL as well , we dont need it though
AND p.q.value('(./action[@name="client_app_name"]/value)[1]','varchar(100)') <> 'Replication Monitor' --Ryelugu : 03/09/2015 We do not want any records being caprutred by Replication Monitor ??
SELECT GETDATE() GETDATE_4
-- SELECT * FROM #TEMP
-- SELECT COUNT(*) FROM #TEMP
-- SELECT GETDATE()
-- RETURN
-- PRINT '3'
--RETURN
INSERT INTO [dbo].[MN_DDLSchema_Changes_log]
[UserName]
,[DbName]
,[ObjectName]
,[client_app_name]
,[ClientHostName]
,[ServerName]
,[SQL_TEXT]
,[EE_Time_Stamp]
,[Event_Name]
SELECT
CASE WHEN T.nt_username IS NULL OR LEN(T.nt_username) = 0 THEN t.ServerPrincipalName
ELSE T.nt_username
END
,T.DbName
,T.objectname
,T.clientappname
,t.ClientHostName
,T.server_instance_name
,T.sqltext
,T.Time_Stamp_EE
,T.eventname
FROM
#TEMP T
/** -- RYelugu 03/06/2015 - Filters are now being applied directly while retrieving records from BUFFER or on XML
-- Ryelugu 03/15/2015 - More filters are likely to be added on further testing
WHERE ddl_Phase ='Commit'
AND ObjectType <> 'STATISTICS' --Ryelugu 03/06/2015 - May be SQL Server Internally Creates Statistics for #Temp tables , we do not want Creation of STATISTICS Statement to be logged
AND ObjectName NOT LIKE '%#%' -- Any stored proc which creates a temp table within it Extended Event does capture this creation statement SQL as well , we dont need it though
AND T.Time_Stamp_EE >= @Prev_Insertion_time --Ryelugu 03/05/2015 - Performance Optimize
AND NOT EXISTS ( SELECT 1 FROM [dbo].[MN_DDLSchema_Changes_log] MN
WHERE MN.[ServerName] = T.server_instance_name -- Ryelugu Server Name needes to be added on to to xml ( Events in session )
AND MN.[DbName] = T.DbName
AND MN.[Event_Name] = T.EventName
AND MN.[ObjectName]= T.ObjectName
AND MN.[EE_Time_Stamp] = T.Time_Stamp_EE
AND MN.[SQL_TEXT] =T.SqlText -- Ryelugu 03/05/2015 This is a comparision Metric as well , But needs to decide on
-- Peformance Factor here , Will take advise from Lance if comparision on varchar(max) is a vital idea
--SELECT GETDATE()
--PRINT '4'
--RETURN
SELECT
top 100
[EE_Time_Stamp]
,[ServerName]
,[DbName]
,[Event_Name]
,[ObjectName]
,[UserName]
,[SQL_TEXT]
,[client_app_name]
,[Created_Date]
,[ClientHostName]
FROM
[dbo].[MN_DDLSchema_Changes_log]
ORDER BY [EE_Time_Stamp] desc
-- select getdate()
-- ** DELETE EVENTS after logging into Physical table
-- NEED TO Identify if this @XML can be updated into physical system table such that previously loaded events are left untoched
-- SET @XML.modify('delete /event/class/.[@timestamp="2015-03-06T13:01:19.020Z"]')
-- SELECT @XML
SELECT GETDATE() GETDATE_5
END
GO
Rajkumar Yelugu@@Version : ----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Microsoft SQL Server 2012 - 11.0.5058.0 (X64)
May 14 2014 18:34:29
Copyright (c) Microsoft Corporation
Developer Edition (64-bit) on Windows NT 6.2 <X64> (Build 9200: ) (Hypervisor)
(1 row(s) affected)
Compatibility level is set to 110 .
One of the limitation states - XML columns with a depth of more than 128 nested nodes
How do i verify this ? Thanks .
Rajkumar Yelugu -
Find the installation Path of the current running VM on Windows
Hello,
I have a java class started by webstart.
In this class I would like to find the absolute path of the current running vm? This is important to me because I need to start an exe file (using ProcessBuilder) and hand it the path of the java VM,
For example I could try something like this:
private static File findJDK() throws Exception {
String s = System.getProperty("java.home");
File myJRE = new File(s);
if (new File(myJRE, "bin/javac.exe").isFile()) {
return myJRE;
File parent = myJRE.getParentFile();
if (new File(parent, "bin/javac.exe").isFile()) {
return parent;
for (String pathel : System.getenv("PATH").split(File.pathSeparator)) {
File bindir = new File(pathel);
if (new File(bindir, "javac.exe").isFile()) {
return bindir.getParentFile();
return myJRE;
But I would like the above code to be more fool proof!
For example the "java.home" could be wrongly set.
Since java is allready running I would have hopped that I could query the Runtime. But there seems to be no method providing the running java VM path?
I also tried looking at the jnlp services API but no luck.
I would be also interested find the lastest java VM on the client Windows machine....
Many greetings
johnhttp://docs.oracle.com/javase/7/docs/api/java/lang/System.html#getProperties()
bye
TPD -
Does the current WebKit version in Air SDK 3.5 support Uint8Array or any bufferArray stuffs?
Does the current WebKit version in Air SDK 3.5 support Uint8Array or any bufferArray stuffs? If not, is there an alternative or workaround solution so I can reuse some javascript routines that requires bufferArray like Uint8Array...? Thanks in advance.
You needed to use SDK 5.1 or later. AIR uses 6.0 or 6.1 now, so Retina is ok without any special tricks.
-
hi i am trying to install NI-VISA driver on SUSE LINUX 11.1.
the error message it shows is
******************************** ERROR ****************************************
* The version of gcc in the path does not match the version of gcc used to *
* compile the currently running kernel. This can cause unpredictable *
* behavior in kernel drivers and should be fixed. *
* gcc version: Linux) *
* kernel compiled with: 4.3.2 *
******************************** ERROR ****************************************
my kernel source version is
linux-8nes:/home/admin # rpm -qi kernel-source
Name : kernel-source Relocations: /usr/src
Version : 2.6.27.29 Vendor: openSUSE
Release : 0.1.1 Build Date: Sun 16 Aug 2009 03:43:52 PM IST
Install Date: Sat 24 Oct 2009 02:13:12 AM IST Build Host: rinck
Group : Development/Sources Source RPM: kernel-source-2.6.27.29-0.1.1.src.rpm
Size : 309251954 License: GPL v2 only
Signature : RSA/8, Sun 16 Aug 2009 03:57:25 PM IST, Key ID b88b2fd43dbdc284
Packager : http://bugs.opensuse.org
URL : http://www.kernel.org/
Summary : The Linux Kernel Sources
Description :
Linux kernel sources with many fixes and improvements.
Authors:
Linus Torvalds <[email protected]>
see /usr/src/linux/CREDITS for more details.
Source Timestamp: 2009-08-15 17:53:59 +0200
GIT Revision: 8a413546901c407e96f7fba18574cceeb40452af
GIT Branch: SLE11_BRANCH
Distribution: openSUSE 11.1
i had also installed GCC 4.3.2.
it shows the error message as i had posted.
please kindly help me on this.
Thanks and regards,
P.karthickCheck this solution
-
Before using the current Mac version Yosemite, I did not have an Administrator password. It seems now that one is required to unlock and make changes in settings. I have tried all my usual passwords but to no avail. any ideas???
Boot into Recovery. OS X: About OS X Recovery - Apple Support
Select Terminal from the Utilities menu.
At the prompt type,
resetpassword
Hit return.
Follow the prompts in the utility to select hard drive, then user.
Reset the password.
Exit the utility and restart.
You will need to log in with your new password, but your keychain will not be reset.
I’m not sure what access you’ll have to the old keychain since it didn’t have a password. You may be able to get into the keychain and reset the password to match your login password. -
I have a Voyager Plantronics Pro bluetooth device and have been experiencing problems since the most recent ios upgrade (6.0.1). Is there a way to restore the previous os version?
I have a Voyager Plantronics Pro bluetooth device and have been experiencing problems since the most recent ios upgrade (6.0.1). Is there a way to restore the previous os version?
-
Display the Current Running Files in the Label Control
I have a label control in Windows Form Application, and i have the application to display the building and progress of the projects in the label control using C# code. Along with the update of the label, the progress bar should also show progress simultaneously,
according to the building of the project. How should i do this ??
Thanks.
TanmayHello All;
I want to know how can i display the current running project in the label control along side the same, i want to display the progress of the files that are build successfully through a progress bar.
What i need to do is when i click the button named as "Build" in the GUI it will display the selected projects to build from the CheckedListbox into the label control placed in the GUI.
Please, provide me some hint regarding the same.
Thanks.
Tanmay
Hello,
It depends on what your application is and how you build these files, if possible you could share them with us.
The most common way to display the progress, is to set the text for that label before or after we execute the line building these files.
You could place the lines setting the text or change the progressbar.value before or after the building lines.
Here is a simple sample using progressbar with a backgroundworker.
http://stackoverflow.com/questions/12126889/how-to-use-winforms-progress-bar
Regards,
Carl
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
How we can get the current running user information in BusinessOne
Hi experts,
How we can get the current running user information in BusinessOne Application,
Based on the user details i want to assign some functionality,
Regards,
Saidarao yakkalaHi,
As per me you can't get detail by server side.
If you want to know who are connected then you can use sp_who2 procedure in SQL query.
That will display who are login.
For more detail you have to check LOG file on client side in SAP B1 > Log folder.
Thanks
Kevin
Maybe you are looking for
-
How do I get my email account to appear in mailboxes in settings on iphone?
How do I get my email account to appear in mailboxes in settings on iphone? Tx
-
How to close the called vi but keep caller vi remain open
I have Main.vi that call and open subvi Calculator.vi. I want to close Calculator.vi window and keep Main.vi open when exit button is pressed. I've tried the EXIT function but this method also close Main.vi. Is there another method that close call
-
How do I make I Photo my default photo app?
the new program ***** and I want I Photo to be my default program. I would love to delete Photos off my computer so I don't have to have it but I won't let me do that!
-
Error in page when ADF Security enabled
Hi, I have created a sample JSF page having only a 'Hello World!' output text. When I run the page without enabling ADF Security, it runs fine. I have enabled ADF Security as per "29.3 Enabling Oracle ADF Security" in Dev Guide for ADF. Now when I ru
-
How to send a 'ESC' to a native program
Dear, I'm calling a native program using: Runtime.getRuntime().exec(cmd); This command opens cmd.exe. I use the outputstream to move to the right directory and open the desired program. The program executes properly but when it finishes, it asks to p