Is there a way that you can copy and paste blade effects from one clip to the other so that the cuts are an exact duplicate of each other?

The same cuts that I have in this clip that i performed with the blade tool, I want to duplicate, copye, paste and apply to another clip. I want the cuts to mimic and be an exact same. I wish i could highlight the clip, click copy and then highlight the other clip and then click paste and the cuts apply.

Similar Messages

I download autocad 2010 with crack, how can i install it with crack coz i can't find where to paste the crack file? not like windows just go to drive c, progarms and click the installed folder and you can copy and paste the crack file.

i download autocad 2010 with crack, how can i install it with crack coz i can't find where to paste the crack file? not like windows just go to drive c, progarms and click the installed folder and you can copy and paste the crack file.
please help me..
thanks

No one here will help you.
You should definitely ask your question in this forum:
http://forums.autodesk.com/t5/AutoCAD-2010/bd-p/360

Copy and paste additional content from one computer to another

I recently installed Logic pro on my macbook, I already have it installed on my iMac.
I am facing problems in downloading and installing the additional audio content from Apple website.
is it possible that I can copy additional content from my iMac and paste in Macbook.
If yes, where the additional content is saved on iMac and where should I paste on my macbook.
any solutions.
thanks
I. P. Singh
Ind

The Art Of Sound wrote:
some people have reported issues trying this with content not being found etc...
On a sidenote: I am pretty sure that in some of those cases what actually happened was that people opened Logic immediately after installing or copying content, and then expecting Logic to find this, but the Spotlight index (which EXS24 and NI's Kontakt use to find samples) was probably still busy updating.
This can take a few minutes up to half an hour or more (e.g. after installing big sample ibraries).
A pulsating dot inside the magnifying glass Spotlight symbol, on the top right corner of the screen, indicates that the Spotlight Index is being rebuilt or updated. Other indications are active MDS and/or MDWorker processes; those can be seen in Activity Monitor.
(these processes are usually open, the CPU % is what matters)

Problems copying and pasting multiple slides from one captivate to another.

I have been able to copy and paste several slides into
another captivate and suddenly this has stopped working. I am using
the ctrl key to select multiple slides (a set of 3) and the using
the Edit drop-down to select copy slide. Then, I click on the other
captivate and click paste slides. It is only bringing 1 slide, the
first one, and not the 2nd and 3rd... any ideas. I've had another
set of eyes look over my shoulder... and we're both scratching our
heads.
Also, for some reason the text entry boxes are being copied,
but the failure caption associated with it does not come along. It
also copied the button but lost the association with the text entry
box. WTH?

This might work, this might not. I have copy paste problems
on a regular basis and all that works for me is closing Captivate
down and then re open and continue. At worst, a reboot tends to
solve this glitch in my experience.
Good Luck

Is there a way of printing or copy and pasting to a word doc markers

I have a long interview which I have created over 50 markers for various points in the audio. I want to put these into a word doc with timings for easier logging.
Any ideas?

I'm afraid not - development stopped on it about 10 years ago. All you need to do though is copy the wav file, complete with cue list, and find a pc to open it on. Then you can export the cue list as a text file that you should be able to save and open up on a mac, almost certainly. And since there are at least ten times as many PCs as there are Macs, I wouldn't have thought that it would be too difficult to find one...

How do I copy and paste vector art from one layer to another, keeping all of its attributes?

When I copy a vector shape from one layer to another, the shape picks up the color attributes of an existing shape in the second layer (or sometimes only the outline of the shape appears). What to I do to avoid this from happening (I just just want to paste the shape in its original form and color)?

OK - I guess this is a little more difficult than I imagined...
Merge Layers rasterizes all the vector shapes - I want all the shapes to stay as vectors in the second (pasted) layer.
Merge Shapes changes the color of the copied vector shape - I don't want to change the color
Shape Layer via Copy [Ctrl] +[J] copies the layer containing the vector shape, but doesn't paste it into the second layer
Any other ideas? Or, is it possible that PhotoShop doesn't support varied colored vector shapes on the same layer? I am coming from an InDesign background, and there was no issue having many different (colored) vector objects on the same layer.

How do I copy and paste email addresses from one email to a new one?

I need to copy email addresses from one email to a new one. I can copy, but I can't paste them to the new email. Any help would be appreciated!

Highlight it and then right click, select Copy. then go to the new email you are writing and place the cursor in the TO field and right click, select Paste.

Problems copying and pasting a head from one photo onto a body of another photo

I used the magnetic lasso tool in PSE8 to trace around the head
and then copied it from the edit menu. Opened the new photo with the
body I wanted and pasted the head into the photo. Instead of just the head, a
white margin was around the head and it covered up part
of the shoulders on the body and background of the picture.
How do I just copy the head without the added white margin around it? My last
PSE version was 3 so 8 is a big jump for me.

Hi,
Select the head via any ool and create a layer via copy from right click.
Now open the destination image and drag this layer to that image and move around it using the move tool. It works fine on me. If this doesnot fix the issue, please let me know the exact steps.
~V

The MacBook Pro will not allow me to cut-and-paste to and from or to click-and-drag to the external drive. I can copy-and-paste, but then I must send the original to the trash, which doubles the time and effort. Is there any way to cut-and-paste?

I have recently switched from a PC to a MacBook Pro.
I have a large number of documents and photographs on a multiterrabite external drive, backed up on a second multiterrabite external drive.
Both external drives are formatted for MacIntosh. This has been verified by agents at an Apple store and also at Best Buy in two different cities.
This is the problem:
The MacBook Pro will not allow me to cut-and-paste to and from or to click-and-drag to the external drive. I can copy-and-paste, but then I must send the original to the trash, which doubles the time and effort. Is there any way to cut-and-paste?
Also, the MacBook Pro will not allow me to rename multiple documents or photographs. I can click-and-rename a single one, but this is impossibly time consuming. I can batch-rename in iPhoto, but when I transfer the photographs to the external drive, the rename does not transfer.
I’m reduced to using my wife’s Toshiba to cut-and-past, rename, and transfer documents. It works perfectly. Is there any way to do this on the MacBook Pro?
Thanks!
Roderick Guerry
[email protected]

Roderick Guerry wrote:
The MacBook Pro will not allow me to cut-and-paste to and from or to click-and-drag to the external drive. I can copy-and-paste, but then I must send the original to the trash, which doubles the time and effort. Is there any way to cut-and-paste?
No, this is a philosophical difference between Apple and Microsoft. Apple believes that it's dangerous to cut a file in case the user never pastes it; in that case the file is lost. Microsoft seems to not have this problem (if I remember Windows correctly) because they don't delete the originating file if it's cut but never pasted.
Even though Macs have a lot of keyboard shortcuts, philosophically Macs have traditionally been mouse-first. This applies to file copy operations. In your case, what a Mac user would do is open the source window, open the destination window (on your second drive), and then Command-drag the selected files from the source to destination window. This is because a normal drag would leave the originals behind, while adding the Command modifier key tells OS X that this is a Move, not a Copy, so don't leave the originals behind.
(In addition there are different rules for drag-copying within the same volume or between different volumes. If you drag between two folders on the same volume, the files are moved. If you drag between different volumes, the files are copied unless you hold down Command to delete the copies on the source volume.)
Roderick Guerry wrote:
Also, the MacBook Pro will not allow me to rename multiple documents or photographs. I can click-and-rename a single one, but this is impossibly time consuming. I can batch-rename in iPhoto, but when I transfer the photographs to the external drive, the rename does not transfer.
Two problems in this case. First, batch file renaming is not built into OS X unless you build something with Automator. However, there are many utilities that can do batch file renaming which you can find at macupdate.com or on the App Store. Since I work with media I often batch rename using one of the media managers I have lying around like Media Pro or Adobe Bridge (comes with Photoshop).
iPhoto is a database front end designed to shield the file system from the consumer and let them concentrate on creativity and sharing. As such it is often a poor choice for managing files directly. When you "transferred the photographs" chances are you moved the originals, not the ones iPhoto edited which are stored in a hidden folder.
Roderick Guerry wrote:
I’m reduced to using my wife’s Toshiba to cut-and-past, rename, and transfer documents. It works perfectly. Is there any way to do this on the MacBook Pro?
There will not be a way to do it exactly like Windows. As described above, there are ways to do it "the Mac way." If it is possible to remove judgment on which way is "better" you might find the Mac way to be acceptable, but of course sometimes we simply prefer what we're used to.

Is there any way how i can download and run Window based games, with out installing Windows-thus Bootcamp? and if so, is it free?

is there any way how i can download and run Window based games, with out installing Windows-thus Bootcamp? and if so, is it free?

No, you must install Windows to run Windows software. You do not need to use Boot Camp (yes, it's free because it comes with OS X.)
Windows on Intel Macs
There are presently several alternatives for running Windows on Intel Macs.
Install the Apple Boot Camp software. Purchase Windows XP w/Service Pak2, Vista, or Windows 7. Follow instructions in the Boot Camp documentation on installation of Boot Camp, creating Driver CD, and installing Windows. Boot Camp enables you to boot the computer into OS X or Windows.
Parallels Desktop for Mac and Windows XP, Vista Business, Vista Ultimate, or Windows 7. Parallels is software virtualization that enables running Windows concurrently with OS X.
VM Fusionand Windows XP, Vista Business, Vista Ultimate, or Windows 7. VM Fusion is software virtualization that enables running Windows concurrently with OS X.
CrossOver which enables running many Windows applications without having to install Windows. The Windows applications can run concurrently with OS X.
VirtualBox is a new Open Source freeware virtual machine such as VM Fusion and Parallels that was developed by Solaris. It is not as fully developed for the Mac as Parallels and VM Fusion.
Note that Parallels and VM Fusion can also run other operating systems such as Linux, Unix, OS/2, Solaris, etc. There are performance differences between dual-boot systems and virtualization. The latter tend to be a little slower (not much) and do not provide the video performance of the dual-boot system. See MacTech.com's Virtualization Benchmarking for comparisons of Boot Camp, Parallels, and VM Fusion. Boot Camp is only available with Leopard or Snow Leopard. Except for Crossover and a couple of similar alternatives like DarWine you must have a valid installer disc for Windows.
You must also have an internal optical drive for installing Windows. Windows cannot be installed from an external optical drive.

Applications that can copy and paste between Keynote?

I am looking for both graphic and web appliations that can copy and paste scalable elements between it and Keynote. I create a lot of graphics in Keynote and I am hoping to find editors that can handle those elements. I already own PowerPoint, and it does an OK job. I you have any suggestions, I would like to here it.

Shapes created in PowerPoint can be placed on to a Keynote slide using copy and Paste.
Illustrator is the number one vector application and Illustrator files can drag and drop on to the slide.
The HTML export from Keynote as you have discovered, is only designed to make simple HTML slide shows
see some free applications here:
Free vector apps

HT2506 hi i can't seem to copy and paste pdf files from preview to a microsoft word document. it always comes up with nonsense characters in the word document. how do i fix this? thanks in advance

hi i can't seem to copy and paste pdf files from preview to a microsoft word document. it always comes up with nonsense characters in the word document. how do i fix this? thanks in advance

Hi,
The quickest way to do this (tested with OS 10.8.2, MS Word 2011) is in one line:
tell application "Microsoft Word" to close every document whose name begins with "book"
The reason why your script doesn't work is that you aren't specifying to Word which document you want it to close.
So, changing one line ought to do it:
close document incrementvalue -- instead of "close document"
But... when you close a document, you change the document count. Document 2 becomes document 1, document 3 becomes document 2 etc. So eventually you'd get a message saying "The object you are trying to access doesn't exist".
Because of this, if you want to do it in a repeat loop, you have to work backwards:
tell application "Microsoft Word"
set doc_count to count documents
repeat with x from doc_count to 1 by -1
if name of document x begins with "book" then close document x
end repeat
end tell
Hope this helps.

How can I use the "Copy and paste" tool in order get stamps in the same position in different pages (Acrobat XI for PC)?

With Acrobat 6.0 I was able to copy a stamp in the same position (I mean "exactly" the same one) of different pages just by using the "copy/past" tool.
Now I am using Acrobat XI and it seems like it is not possible anymore: I am copying a stamp and I am trying to past it in anoter page, but it appears in the center of the page (or wherever it wants to...).
Does anyone have a solution?
Thanks in advance.

Thank you very much. I'll be waiting for you message.
Messaggio originale----
Da: [email protected]
Data: 26/01/2015 17.56
A: "Umberto Gangi"<[email protected]>
Ogg: How can I use the "Copy and paste" tool in order get stamps in the same position in different pages (Acrobat XI for PC)?
    How can I use the "Copy and paste" tool in order get stamps in the same position in different pages (Acrobat XI for PC)?
    created by Gilad D (try67) in Creating, Editing & Exporting PDFs - View the full discussion
Well, I was in the same situation so I've developed a tool that allows one to do it. I will send you some additional information about it in a private message.
     If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7132586#7132586 and clicking ‘Correct’ below the answer
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7132586#7132586
     To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following"
     Start a new discussion in Creating, Editing & Exporting PDFs by email or at Adobe Community
For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.

I want to copy and past 58 links from my IE favorites into the bookmarks toolbar...not one at a time. where's the folder i can copy these too?

i want to copy and past 58 links from my IE favorites into the bookmarks toolbar...not one at a time. where's the folder i can copy these too?
== This happened ==
Not sure how often
== i want to copy and past 58 links from my IE favorites into the bookmarks toolbar...not one at a time. where's the folder i can copy these too?

Firefox doesn't store the bookmarks as separate files in a folder, but uses a sqlite database file with the name places.sqlite.
You will have to export those favorites in IE to an HTML file and import that file in Firefox.
Bookmarks > Organize Bookmarks > Import & Backup > Import HTML : "From File"
See http://kb.mozillazine.org/Backing_up_and_restoring_bookmarks_-_Firefox

I am trying to copy and paste a story from a blog. I can only view the first page on the Pages app. How do I see the rest of the pages?

I am trying to copy and paste a story from a blog. I can only view the first page on the Pages app. How do I see the rest of the pages?

Thank you. That helped in the first step. I was able to copy text onto multiple pages.
Now I can't get the pictures to copy. How do I get my pictures to copy?
Also once the blog page is on pages, how do i make changes to it?
This my story and the page I am trying to copy.
http://www.city-data.com/forum/tennessee/359683-going-off-grid-east-tennessee.ht ml
Thanks so much
Lisa(writing) and Mike trying to get it right.

Is there a way that you can copy and paste blade effects from one clip to the other so that the cuts are an exact duplicate of each other?

Similar Messages

Maybe you are looking for