Is there a way to access the web-based setup for my router if I cannot access the internet?

Okay, I need to change the ip address settings on my router. I have a WRT54G Wireless router. I cannot access the internet on my computer connected to the router, and do not know how to change the router settings without accessing the web-based setup page. So, back to my question. Is there a way to access this page if I cannot connect to the internet?

On the back of the router is a small reset switch. Using a paper clip or other small item, press the switch in and hold it for a few seconds. This will reset the router to the default IP address of 192.168.1.1. Enter that address in your web browser, and be sure your computer is attached to the router by an Ethernet cable. Don't attempt to do this using the wireless connection.
Once you have reached the web configuration utility you can change the DHCP settings.
To give your PC a static IP address you will need to open your network connections panel and, assuming your using Windows XP, make the changes from dynamic IP to static there.

Similar Messages

Is there a way to develop an HTML based extension for Dreamweaver like ones for PS or AI?

Is there a way to develop an HTML based extension for Dreamweaver like ones for PS or AI? I mean like extension produced by Extesion Builder 3.

Snippets is a good idea. But you can also do this with a template. Each time you use FILE | New > Page from Template, as you would to create a new child page, you have the option to enable or disable an option called "Update page when template changes". If that option is DISABLED (i.e., unchecked), then the child page will be created but with NO TEMPLATE MARKUP (i.e., no editable/non-editable regions)! Seems that's exactly what you want, no?

Is there a way to add an alternate purchase form for a catalog or product, so that the autoresponder for that catalog or product can be customized?

I have a client who wants to offer an ebook with an online exam form. I'll create a secure zone for the exam form.
She wants 3 sales opportunities:
Buy the ebook
Buy the same ebook and include access to the exam form as an upgrade option, possibly post-purchase via link in the ebook to paid subscription zone
Buy the same ebook together with access to the exam form, modifiying a custom purchase form autoresponder to contain a link to a different (free) secure zone?
Is there a way to create an alternate purchase form inside the ecommerce catalog system, so that I can customize the autoresponder to contain a get-login link to a subscription zone?
I'm trying to solve this with as few secure zones as possible. Does anyone have any better, more creative, cost-effective and elegant ideas for solving this?
Thanks for any thoughts or info.

Hi
Thanks for your guidance
This has opened up my mind , I now I find I am totally distracted from
the CP project I should be working on.
So I find I have two further problems or maybe they are questions
I could not find a Tutorial on Scripting is it in Further tutorials ,
because for some reason my computer although connected to the internet
will not open anything just a message to say I need an internet
conection; this will be an internal IT issue.
Secondly exploring the help I tried the
Create static widgets
Select File > New > Widget in Flash.
In the Create New Widget dialog box, do the following:
In the Widget menu, select Static.
In the ActionScript Version menu, select the ActionScript version that
you plan to use when writing the widget code in Flash.
Click OK.
In Flash, right-click the Actions layer in the Timeline, and select
Actions.
The Actions panel appears with the template code for the static widget.
Customize this code to create your widget.
New project startup
You can see the option is greyed out for me!
Inside a Project - Same thing
What have I not understood
Totally unrelated issue
The company has bought 2 copies of ADOBE ELEARNING SUITE would you
believe after 3 weeks I still do not have an activation code ADOBE say
they are having problems with their system
Kind regards
Ashley Galloway
International Training & eLearning Manager
Message was edited by: Captiv8r - Removed personal information and company disclaimer that had apparently been automatically added during an E-Mail reply.

Error when accessing the web-based portal for SQL Azure

Hi,
when trying to access SQL azure management portal, the following error is thrown:
[MoreThanOneMatch]
Arguments:
Debugging resource strings are unavailable. Often the key and arguments provide sufficient information to diagnose the problem. See
http://go.microsoft.com/fwlink/?linkid=106663&Version=5.1.30214.00&File=System.Core.dll&Key=MoreThanOneMatch -
Looking at the site in question, the problem seems to be Silverlight related. However, I am unable to debug as suggested since the server is located on Microsoft premises. To rule out a wrong password, I did a reset and ruled out typos by copying username
and password into the field. Furthermore since its not a production database, all IPv4 addresses (range 0.0.0.0-255.255.255.255) are allowed to access the database, so the problem should not be related to ip-based access restrictions. Is this a bug
in the web interface or is the problem sitting in front of the screen?
Regards,
Chris

Hello,
I also meet this issue when connect to SQL database without specify database on the login page. But the error disappear when I specify the database name in the database section, for example, master.It may be a bug in Management Portal of SQL Database.
Regards,
Fanny Liu
If you have any feedback on our support, please click here.
Fanny Liu
TechNet Community Support

Need access the E1000's web-based setup page.

I have a Linksys E1000 wireless router, and I seem to have either written down the password incorrectly or am using the wrong one. Regardless, I can not access the web-based setup for the router. Is there anyway to reset the username and password for it?
Solved!
Go to Solution.

Yes, there is. You'll have to reset the router back to defaults, which will reset the password back to the default password for your router. Unfortunately , you'll also have to reconfigure the settings, since all settings go back to factory default. Just hold press the recessed "reset" button for your router for about 30 seconds, then release it. After the router has re-initialized itself, you'll be able to log in to the web GUI again with the default password.

WRE54G Web Based Setup in-accessible

I just got my WRE54G set up with my wireless network, using a WRT54G v5 for my main connection. After everything was set up and running, I went to the web-based setup for the expander and changed the password from the default. When the page tried to reload, it said "The connection to the server was reset while the page was loading." Repeated attempts to access the web-based setup give the same problem. I'm hoping I don't have to reset the expander and start all over, and was wondering if anyone has experienced this issue.
If it matters, the expander is running the firmware it came with, updating that was the next thing on the list after I changed the password, but I haven't been able to connect again to fix it.

Have you changed the ip address of the range expander ? If yes, then give the static ip to the computer
Click on the Start button >>> Settings >>> Control Panel >>>Network Connections- Right click on the icon for Local area connection and go to properties- On the 'General' tab select 'Internet Protocol TCP/IP' and click on the Properties button- Select 'Use the following IP address'- Provide IP Address - 192.168.1.5, Subnet Mask - 255.255.255.0, Default Gateway - 192.168.1.240(default ip address of range expander)- >>Click on Ok button to Save and Click on "Close" on main Properties window.
Then try to open the setup page of Range Expander.

E1000 won't connect to Cisco Connect or the Web based set up

My router is working fine but I cannot connect to Cisco Connect or the web based advanced features now. I know I broke the cardinal rule by using advanced set up so that explains why Cisco connect won't work. But I can't figure out why I can't connect to the advanced web based utility now. Who made the decision to put some features in cisco connect but not include those features in advanced settings? And then if you use advanced settings cisco connect no longer works. This is such a turn off I'm actually thinking about returning the thing to Best Buy. That's like saying "if you open the hood of your car and touch anything parts of your car will no longer function". I call support and they repeat what they read on paper "reset the router and start over and don't use advanced settings". What a pain in the &^%$.

I've reinstalled the router again and just switched the ssid and password where it was before so all the devices in our home can connect. I first shut down the guest account using Cisco Connect (which is the only place you can control the guest account) and now I just use the advanced settings. So of course Cisco connect no longer works. I've got a strong signal all over our home. No disconnection issues at all. But this software design that puts some features in one part and other features in advanced and then shuts down cisco connect if you use advanced is insane. If I knew cisco was planning a firmware upgrade to give the advanced mode everything cisco connect has and more then I'd keep this thing. For the life of me I cannot understand why any software engineer would come up with such a design as this. And quite honestly I tried to play by their goofy rules of not using advanced settings and cisco connect died after about 4 uses. Never would connect again. Just said call support (in India) and after telling your life's story to someone simply being told to hit the reset button, power off and start the process all over again. If anyone at Cisco reads this stuff I think I have a legitimate complaint. Why on earth would you put features in Cisco Connect that aren't in advanced and why would you stop running Cisco connect just because I hard coded some mac addresses in advanced mode? I would love to know the logic behine such a crazy implementation of software.

E3000 guest network web-based setup

I replaced an old router with E3000. Since I already had a number of clients connected, I used the web-based setup program to duplicate the old routers configuration. Now it seems there's no easy way to manage (rename, e.g.) the guest network from the web-based setup program. To use Linksys Connect, I need to go back to square one on the router and redo the whole network setup by resetting the router to its factory defaults and then doing everything thru Linksys Connect. Is there some way to get at guest settings thru web-based setup?
Thanks

Right. I went ahead and set it up using the built-in menus. I set the SSID to something new, passowrds, etc. Only after I had everything running did I turn to the guest network. It is now called ROUTER-GUEST (not related to my SSID, btw) and has an unknown password. So it appears that if I want to use the guest network, I must do the whole thing over from square one. Just brilliant to have the menus built in to the router be unable to access some of the features that are available in it.

WES610N Web-Based Setup

The WES610N bridge seems to work fine, but I cannot get into the web-based setup. I have tried using it directly through my laptop, as the instructions show, then through an Asus RT-53N as a router. I did have the 610 connected to my laptop's ethernet socket, where it provided internet through the Asus RT-53N wireless router just fine, but when I tried to access the setup, again, it would not work. Next, I tried it through a desktop and Linksys RVS4000, again . . . nothing. Any ideas? I would like to check the firmware and see what else is in the menu. Thanks in advance for any advice.

Hi there. You can try to connect the WES610N to your laptop again. Check the lan ip address it is getting. By default it has a static lan ip of 169.254.1.250. Try to access that or better ping it first. Once you get the setup page of the device then from there you can configure the ip address that is of course in range of your router. Please check below the links I found from Cisco's kb site:
http://www6.nohold.net/Cisco2/ukp.aspx?pid=80&vw=1&articleid=17593
http://www6.nohold.net/Cisco2/ukp.aspx?vw=1&docid=1bcf60b1339146e0b48e888769a3e376_Linksys_WES610N_f...

Web-Based Setup, not working

Hello...
When I go to the Web-based setup...wireless/security..
nothing is available.
I can't change the keyphrase, or security type WEP WPA andy such darned thing.
It's just not there 90% of the time.
Then once in a blue moon it shows up.
Upgraded all the firmware and such, factory default and the likes.
It used to work at one time. If I could just drive there or contact the wizard of OZ maybe something might happen.
help.
Thank you
Message Edited by crazygirl on 04-06-2008 06:47 AM

I totally lost my internet connection via the router WRT54GS V6
I am connected directly into the computer from my cable modem.
I have tried everything. Upgarded firmware, factory default reset, setting the software again and again.
When I run Easylink Advisor it always reads, no internet...like I said the modem is working when plugged directly into my computer.
All proper lights are working on the router and modem.
Could the router be just be broken?
It seems to be getting worse and worse.
help please.

WPA Security, Crashing OS, Locked out of Web-Based Setup Page. AAAaaarrrrrrgggg!

I tried several times to enable WPA security on my WMP54GS router by using the "Secure Easy Setup" button in the Wireless Network Monitor Panel. I pressed the lighted Cisco logo on the router as directed, I clicked on the "next" button on screen, and Windows crashed. (That is, my system rebooted and Windows reported that it had recovered from a serious error.) I am running XP. I also tried to enable security using the router’s web-based setup page. I followed the instructions, and a new web screen appeared stating "error on page." I tried again to enable security using the web-based setup page, but now it won't let me in using the default password (admin). I tried resetting the router by pressing the reset button for 30 seconds, but I still cannot access the web-based setup page. Sooooooo, I'm out of ideas. Can anyone help?
Thanks.

Hi
When configuring your wireless settings, use a wired computer and not a wireless computer. Because it will not be able to apply the new settings. Its like trying to troubleshoot a automobile malfunction while you are driving the car itself.
Just helping out...
"Success usually comes to those who are too busy looking for it"

WRT54G V8 Can't connect to web based setup page?

Earlier I reset my router and was able to use 192.168.1.1 to visit the web based setup page while trying to re-establish a home network now that I have a new computer using Windows 7 which can not use the easylink advisor. I was able to get on the page to update my SSID and WEP key. But when my wireless devices were still having problems connecting to the internet I tried to go back to the page and found that I can't get it to connect, though my desktop is able to connect to other internet sites just fine.
Does anyone know what i can be doing wrong? I am using Verizon DSL. I was able to ping the router and all tests showed that it was connected fine, yet I still cannot get on the setup page and my laptop still can't connect to the network. I have tried resetting the router again, and still nothing. And yes, I have gone through numerous power cycles. I also tried going though the network map on my computer, but the computer says it was unable to create a map for it even though at the time I had it listed as a Home network.
Message Edited by TaiShan on 01-03-2010 07:06 PM
Solved!
Go to Solution.

Wireless connections to 192.168.1.1 often fail. When accessing the router setup pages, always use a computer that is wired to the WRT54G.
If the above does not solve your problem, then here are my other tips for viewing the router setup pages:
You do not need an Internet connection. The router's "web pages" are built into the router.
Use Internet Explorer, it usually works.
JavaScript must be enabled.
Use a computer that is wired to the router.
In the non-working computer, temporarily turn off your software firewall.
Point your browser to 192.168.1.1 , then login to your router. Your user name should be left blank. Your password is "admin" (with no quotes), unless you changed it.
If you are using Zone Alarm, right click on the ZA icon in the system tray (lower right corner of screen) and then click "Shutdown ZoneAlarm", and see if this fixes your problem. If this does not work, try the following with Zone Alarm: Open the ZAISS control center, go to Privacy, then temporarily turn off Ad Blocking and Cookie Control, and see if that fixes your problem.
Some Zone Alarm users have reported that adding 192.168.1.1 to their list of "trusted" addresses fixed the problem. This trick might also work with other firewalls.
If you are using Noton Internet Security with the Add-on Pack, be sure to turn off the Pop-up Blocker, and the Ad blocker. Some users have reported that they needed to uninstall the entire Norton Add-on Pack.
If you cannot get anything at 192.168.1.1 then perhaps this is not your router's address. Go to "Start" > All Programs > Accessories > Command Prompt.
A black DOS box will appear. Type in "ipconfig" (with no quotes), then hit the Enter key. Look at the "Default Gateway". Is it 192.168.1.1 ? Point your browser to the "Default Gateway", then login to your router.
If the above fails, disconnect your modem from the router, and try again. If this corrects your problem, then most likely you have a "modem-router" rather than an ordinary modem. Report back with this problem, and also state the make and exact model number of your modem (not the router).
If all of the above fails, power down your entire system, unplug it from the wall, wait one minute, then power up and try again.
If all of the above tips fail, then reset the router to factory defaults: Power down the router and disconnect all wires from it. Wait one minute. Power up the router, allow it to fully boot (1-2 minutes), then press and hold the reset button for 30 seconds, then release the button and allow the router to reset and reboot ( 2-3 minutes). Power down router. Wait one minute. Connect one computer, by wire, to a LAN port on the router. Boot up system. The router should work, but you will need to setup your router again from scratch. If you saved a router configuration file, DO NOT use it.
If you still have trouble, then you need to download and install (or re-install) the latest firmware for your router. After the firmware upgrade, you must reset the router to factory defaults, then setup the router again from scratch. If you saved a router configuration file, DO NOT use it.
Message Edited by toomanydonuts on 01-03-2010 10:54 PM

Web Based Setup / Not loading properly

I'm having a problem with my WRT54G V6 (wireless router). It happened few times since i got this router. (A friend of mine also have a wireless router from Linksys, i don't know the model).
We both have the same problem:
- After running for a while, the router doesn't seems to work anymore. I can't access any web page or other things, so i come to my desktop (WIRED) to the router, try to access the Web Based Setup page, and it BARELY LOAD! The HTML page is sloppy, like if it never finish to load or even worse: all tabs have different font size and colors.
- When it happen, i have no choice to remove the power cable, then put it back and everything get back to normal.
What could cause that?
I've upgraded the firmware many times (even did it this morning with v1.02.0, but i'm sure i'll have the same problem again and again).
My router is not submitted to power fluctuation, it's plugged to an UPS.
THANKS!

Hi… Reduce the MTU on this router to 1365. If you re-flash or upgrade the firmware make sure you reset this router to factory default settings and reconfigure it.

How to get the command line interface for WRT160NL router

hi,
How can I get the command line interface for WRT160NL router. please suggest.

If you’re trying to access the web-based interface of your router, just use its default IP address (192.168.1.1). The Username is left blank and the Password is "admin". Here’s a quick link on how to do that.

Cannot logg in into router web-based setup

Ive tried installing my WRT54GS router with LELA but it says that it cannot detect my router, so I tried to configure on the web-base setup and when I try to go in the page it says that it cant find that page. If any one knows how to logg in into the router in a different way please let me know.

try few more settings ... disconnect the Mode from the router ... Reset the router fro few seconds ... make sure that while holding the Reset button the Power light should be blinking ....hold it for few seconds .... unplug -replug the power cable & release the reset .... Check the Ip address as i mentioned in earlier post .... disable all firewall for few minutes ... try to ping the Ip address 192.168.1.1 ...if getting replies .... try going online ....

Is there a way to access the web-based setup for my router if I cannot access the internet?

Similar Messages

Maybe you are looking for