Is there a way to add a folder to my ipad

hi can i add a folder to put all my read or finished with emails, cant seem to be able to.
anyone know, i have an imac and that does it no probs but dont seem to have the option on my ipad ????

Cannot believe the so called experts do not know how to add a Folder in iPad Mail. Yes if yours is a POP account you cannot do it in your main acoount. But if you go into your mail folder where all your Mailboxes are under the Accounts list at the bottom is a list of any accounts you have. One of them should be iCloud, this is an IMAP account. Click on iCloud, and the Folder that opens has an edit button at the top, click on that and at the bottom it has a New Mailbox button, select that and it allows you to add a Folder and name it what you like, you can do this as many times as you want. After that you can select any email you receive, select edit, at the bottom there are three options, one is Move, select that and you can move the email to the folder of your choice, Remember these Folders will be in the iCloud Account.

Similar Messages

  • Is there a way to add multiple folder locations to my pictures folder?

    I have a USB hard drive with a lot of photos on it.  Rather than copy them all to my mac mini hard drive and chew up a lot of space there I'd like to add it as another source to the pictures folder.  Is there a way to do this?

    You can create an Alias to the external drives folder where you have your other images stored.
    http://support.apple.com/kb/TA26514
    Although the article isn't being updated it is still the same for Mt Lion.
    Then you could add that folder to the Finder Sidebar area by just Dragging it to the Sidebar.

  • Is there a way to add mail folder using msn

    Hi all
    Just wondering if there is a way to add mail folders to store stuff -I am using msn
    Thanx

    Not unless you access the account as an Exchange account, which can be done via webmail access with the account using a browser.

  • Is there a way to add photos to the iPad without replacing the ones already loaded?  I am trying to add photos from a folder on a computer that does not contain the other iPad photos.

    Is there a way to ADD photos to my iPad without replacing the ones already there?  I am trying to add photos from a computer that does not contain photos already synced to the device.

    You can use a USB flash drive & the camera connection kit.
    Plug the USB flash drive into your computer & create a new folder titled DCIM. Then put your movie/photo files into the folder. The files must have a filename with exactly 8 characters long (no spaces) plus the file extension (i.e., my-movie.mov; DSCN0164.jpg).
    Now plug the flash drive into the iPad using the camera connection kit. Open the Photos app, the movie/photo files should appear & you can import. (You can not export using the camera connection kit.)
    Secrets of the iPad Camera Connection Kit
    http://howto.cnet.com/8301-11310_39-57401068-285/secrets-of-the-ipad-camera-conn ection-kit/
     Cheers, Tom

  • Is there a way to add a password to a certain folder?

    Is there a way to add a password to a certain folder on a mac?

    Use the Disk Utility in the /Applications/Utilities/ folder to create an encrypted disk image without putting the password in the keychain.
    (60536)

  • When I upload any photos from iphoto or a folder it overwrites all the existing photos. is there a way to add to the existing library without deleting what's already in the library?

    When I upload photos from iphoto or any other folder it overwrites all the existing photos in my ipad. is there a way to add to the existing library without deleting what's already in the library?

    No, apart from using the emailing them, to yourself or using a third-party app such as Simple Transfer (in which case the photos will only go into the Saved Photos/Camera Roll album) or the camera connection kit (Imported album). You need to sync all the photos that you want on the iPad in one go, as only the contents of the most recent sync remains on the iPad - not including photos in a sync is how you delete them from the iPad

  • Is there a way to add other transactions to Applications in BDT menu?

    Hi Masters!
    I'm trying to learn how BDT works. I'm trying to use it to make my own checks in some standard fields. So far I'm able to call my own function at 'View'->Further Checks. It's working fine.
    But my problem is:
    At the BDT menu (BUPT) there is only one Application (Maintain Business Partner - transaction BP). But I want to check the fields (Tax Numbers) in another transaction (BBPMAININT).
    Does this mean that I can only use the BDT controls in this transaction? (It seems to be so; I couldn’t get into my function with BBPMAININT)
    Is there a way to add other transactions to the 'Application' folder, so I can manipulate the fields, views or screens? If there is please tell me how... I checked the documentation but couldn’t figure out...
    Do you have any other ideas of how to make my validations with the standard field (withou changing the standad code)? (NOTE: there is no BADI to do this).
    Thanks in advance,
    José Omar

    Write a custom carousel.  Usually carousel components are just ULs that use something like jQuery to rotate through the LIs.  The foundation carousel component is really just designed for some specific use cases.  Generally I would just recommend rolling your own.

  • HT2513 why are the holidays not on my iCal?  Is there a way to add holidays without doing it manually?

    Is there a way to add holidays to iCal without doing it manually?

    bandmomma,
    Click on this link: https://p13-calendars.icloud.com/holiday/US_en.ics and it will download a file named US_en.ics to your downloads folder.
    Double-click on the file and you will be offered the opportunity to add a calendar to iCal. Just be sure to create a "New Calendar." Don't import into an existing calendar.

  • Is there a way to add an auto fill on name and address

    I have a document, and it has multiple places where they have to put their name and address. Is there a way to add an auto fill so they do not have to type it so many times

    there is no auto save feature.
    if your work was with audio recordings, you might be able to rescue the audio fils themselves. ctrl-click the project, select Show Contents, and open the media folder. if the fiels are there, drop them into a the timeline of a new project

  • I create a birthday calendar in iCal and then click on it in iphoto at the begining of the calendar project each year.  Some how the birthday did not populate the photo calendar.  Is there a way to add the birthday iCal calendar into the calendar project?

    I created a birthday calendar to use in iphoto for calendar.  When a new calendar project is started each year, I click on it in.  Some how the birthday did not populate the photo calendar this year.  The photo calendar is almost complete.  Is there a way to add the birthday iCal calendar into the calendar project? I would prefer not to start over.

    Hi,
    If you first select the calendar on the left, so that its background is highlighted blue/grey, when you make a new events they should be added to that calendar.
    Best wishes
    John M

  • Is there a way to add two windows in the same window?

    is there a way to add two windows in the same window?

    what do you mean by your first use of the word "window"? do you mean a visible frame? a section of the gui that the user doesnt see?
    or perhaps you mean you want to add multiple tabs to a single window, so that switching between tabs shows different windows?

  • Is there a way to add to the existing values in a container when a LabVIEW prototype (cluster) changes?

    Is there a way to add to the existing values in a container when a LabVIEW prototype (cluster) changes?
    I have a cluster with 90 values..  ninety!  yes that many.
    Change one bloody value and the prototype changes in the TestStand step...  Reload the prototype and guess what happens??!!??
    All the bloody values get reset to defaults!  AAAAAAAAAAAAAARRRRRRRRRRRRRRRRRRGGGGGGGGGGGGGGGGGHHHHHHHHHHHH!
    If it was in one place, I could survive the ordeal.  But I have to change bloody prototypes in many places!!!!
    more AAAAAAAAAAARRRRRRRRRRRGGGGGGGGGGGHHHHHHHHHHHHHH!!!!!!!!!!!!!!!!!!!!!!
    I can't even copy the bloody values!!!!!!!  AAAAAAAAAAAARRRRRRRRRRRRRRGGGGGGGGGGGHHHHHHHHHHHH!!!!!!!!!!!!!!!!!!
    Are there any tricks that I am not aware of, or have forgotten over the years, or...  ...   something??!!??!???!!
    If there are none, I will have to post an improvement to TestStand..  I should mention I am using an older version (4.1).

    Hmmmmmmmmmmmmmmmm,
    I am not not very famous with LV and its cluster types.
    So no idea if this works (it works for DataTypes updates very well and a LV cluster is Data Type so.... maybe)
    Make a copy of the step that has to be modified to an new sequencefile. 
    Make modifications the in the copy.
    Now you should have the same DataType Name but other contents in the container. Save it.
    Normally there should be a message box that tells you that version has been incremented. - Accept it.
    Set in StationOptions-File "Allow Automatic ...." to Never.
    Open original sequencefile. Now the there must be a type conflict. Accept/Apply to all  "Use Current Loaded.."
    You have updated the type.....
    Hope this worked,
    Juergen
    =s=i=g=n=a=t=u=r=e= Click on the Star and see what happens :-) =s=i=g=n=a=t=u=r=e=

  • Is there some way to add multiple addresses to an email I am sending that doesn't close the contact list after I click on an address?  This necessitates constantly going back to click the + sign to add each address separately.

    Is there some way to add multiple addresses to an email I am sending that doesn't close the contact list after I click on an address?  This necessitates constantly going back to click the + sign to add each address separately.  Is there some way I can open the contact list, click on all of the individual addresses to which I want to send the email without the list closing between each address entry, and have all of my address entries be listed to the email at one time?  Something like it works in Gmail.  I do not want to use set lists, I want to enter different addresses each time I send an email.  And I am a very slow typist, so I don't want to type the first few letters of each recipient's name.  It is much faster for me to just click on the e-mail addresses in the list as a group.  It doesn't make any sense to me to have to reopen the contact list for each address, when it should be so easy to click on all of the addresses I want at one time and then click once to add them all to the email as a group.  If there is a solution to this, please tell me.  Thanks.

    Vatlily,
    Try this:
    1. Select Mail>File>New Message.
    2. Select Mail>Window>Address Panel.
    3. Use (command+click) on the desired addressees in the Address Panel to create the list.
    4. Click "To:" on the top left of the Address Panel.
    The group that you selected will be added to the "To" field in your New Message.

  • Is there a way to download a folder or all the contents of a folder?

    Is there a way to download a folder or all the contents in a folder? I uploaded all the photos into my Creative Cloud but now I am out of the office and working on another computer so I need all those images so I can create a DVD Slide show for A&M. I need all the images, over 100 of them. Is there a way I can download this entire folder or at least all the images in the folder at one time? All I can find for download is to download each image separately one at a time. I can't even select them all and say download every image selected. I don't want to sit here for hours downloading one image at a time, that's just ridiculous.
    Help Please!

    Ken,
    Just wanted let you know the answer was not helpful but it was correct. Thank you for your time in answering me.

  • Is there a way to add/delete words from the predictive text ?

    Is there a way to add/delete words from the predictive text options that my iPhone is giving me? I'm using an iPhone 6 Plus with iOS 8.
    There are specific words that are popping up in the area right above the keyboard where it displays 3 word suggestions to choose from. This area seems to suggest words that I have typed before, I'd like to remove these words. Default seems to select the word in the center and when I'm typing fast on occasion it will recommend and select words that I don't need to use.
    Any help would be appreciated.

    999753 wrote:
    I know in 10g delete is added but in 9i i can only work with UPSERT( update, insert)
    is there a way to add delete into 9i MERGE? or somehow encapsulate it?
    Thank youI would suggest upgrading to a supported version of the database. 9i has been unsupported for many many years now.
    And to answer your question... to the best of my knowledge, there is no workaround. It works as it works.

Maybe you are looking for