Is there a way to adjust the bass and treble on my iMac Power PC sound system?

Is there a way to adjust the bass and treble on my iMac Power PC G5 sound system? It has a lot of volume (more than my JBL speakers).

No, but iTunes has an Equaliser that enables you to do that.

Similar Messages

  • Adjust the bass and treble

    Hi,
    I'm trying to adjust the bass and treble so that when I hear my Web Radio in Streaming I will adjust the bass and trebles.
    I can do it very well with a file. But how to perform it with the streaming radio ?
    Thanks in advance

    Did anyone ever answer this???? I'm having the same issue but on my ipad mini...

  • Is there a way to adjust the left/right output?

    Is there a way to adjust the left/right output on the iPod?
    Mine seems to push a little harder on the left side no matter which
    ear devices I use.  My hearing in my right ear is a little weaker,
    so I'm hearing mostly just the left side instead of an equal balance.
    My best earphones don't fit the same way when reversed, so they don't
    sound anywhere near the way they should.  You know the drill-- no
    fit, no seal, no bass... no good.
    And, yes, I know I can make a crossed connector cable...
    Thanks for responding.

    using the 30 pin connector means it bypass the volume switch so you can't adjust the volume, see adjust the EQ setting helps. Otherwise you have to add the switch (a pre-amp etc) in between the iPod and your device

  • In garage band lessons the sustain gets more pronounced is there a way to adjust the sustain

    In garage band lessons the sustain seems to increase is there a way to adjust the sustain

    wswilkinson ... sorry for the slow get back, my dance card has been full.
    I've used 3rd party loops or samples. Myself I don't care for them because for me they seem to "lead" me in a direction. The loops direction .... maybe not how I started the song. So I haven't saved many loops into GB. When I did I had just "read how to" . ... then fumbled through it. So I can find those by searching for the names of them.
    Even if I haven't saved many I think I understand how GB goes things.... but could be wrong.
    GB has dozens & dozens of loops. Broken up in many groups. Country , Rock , World , yada yada .... Lots !! If you hit say "World" you'll find dozens of loops of ALL types. Drums, horns , keyboards , etc. But they are all mixed together.... if you just hit "World". So I have to test drive most sounds to hear what they are if I don't know what they are. GB breaks "World into different sounds too .... Bass , etc if you hit those. How did they get that way is what you want to .... Did GB just do it ??  Heck if I know .... One of the best places on GB info is
    http://www.bulletsandbones.com/BBPages/Stuph/MusicianStuph.html  so check here and please lets us know what you find out.
    My thought is make a folder like I said ... named what you want . "My Loops"   ( meaning they didn't come with GB " ) Break everything up into sub folders ... which I guess you may save/add  to as you go a long. When you're done add that to GB's loops. Then look to see if "your" loops have been mixed into GB with you "only" adding the  "My Loops" folder with it Sub groups .. You can always delete something if it doesn't work as you wish ... "ponder things " and try again.
    Never have fear to jack around with things !! It's not screwed your life up yet ... Close GB & DON'T Save It if you're not happy ...
    Peace & Good luck

  • Is there a way to adjust the settings on launchpad so that when I swipe into it all the open apps/pages are fully separated (like in exposé) so that I can fully view all of them simultaneously?

    Hi Apple community,
    This is my first go at this so be kind,
    My question concerns launchpad. Coming from Snow Leopard I had been using spaces. I like to keep certain bundles of programs on separate desktops, for example all word processing related tasks in one place. I have set up the equivalent on Yosemite.
    My problem is concerns the loss of exposé. Now I know when you swipe into launch pad you get a very similar effect but the issue I am having concerns the "zoom out" effect when you swipe into launchpad. With exposé all open apps/pages etc would be fully exposed - in my case several (sometimes as many as 9 word documents). What I am running into is when I do this in / into launch pad the "pile" of docs is exposed but they are still overlapping so I can't get a good look at which is which and visually identify where I want to navigate to.
    My question is this; Is there a way to adjust the settings on launchpad so that when I swipe into it all the open apps/pages are fully separated (like in exposé) so that I can fully view all of them simultaneously? If so, instructions on how to do so would be greatly appreciated. Any alternative suggestions to doing this outside of launchpad are also welcome. If there is an exposé app for example, I would be quite willing to go that route.
    My main concern is being able to quickly (ie a touchpad gesture) expand all the open pages so I can bounce between them.
    Much thanks from a loyal Apple friend.

    Hey Eric,
    Thanks for taking the time. Unfortunately no that does not solve it. Same as swipe it will get me there and it will show separate programs spaced out. The issue I am having is that all my open word files are bunched up in a pile on top of each other. I can see the edges of each one but I want them to be separated from each other enough that I can visually identify what file is what.
    Again, thanks for trying, it is appreciated.

  • __ Is there a way to adjust the key commands for switching channels in curves?

    __ Is there a way to adjust the key commands for switching channels in curves?
    By that I mean <command> + 1 for cyan, <command> + 2 for magenta etc. like Photoshop CS3 rather than <option> + 3 for cyan etc.
    There's gotta be a way under Edit --> Keyboard Shortcuts - but I can't find it!
    Thanks,
    Hugh

    Hi,
    You can find the CS4 plug-in here:
    http://blogs.adobe.com/jnack/files/Use_Old_Shortcuts.zip
    It's inline in tis post with some more background info:
    http://blogs.adobe.com/jnack/2010/05/use_legacy_shortcuts_option_in_cs5.html
    regards,
    steve

  • Is there a way to adjust the intensity of the camera's flash on the iPhone5?

    The flash on my iPhone5 is so strong it overexposes the subjects in my photos, especially people. Is there a way to adjust the intensity of the flash?

    NO

  • Is there a way to adjust the sensitivity of the LG Extravert phone keypad?

    having trouble with the keypad entering several of the same letters at the same time.  Is there a way to adjust the sensitivity?

        Hi Whitehouse,
    When the physical keys are entering a letter twice, it will definitely be something with the hardware. Can you verify that the keys appearing twice aren't getting stuck when pressed? You should be able to feel the key returning when the pressure of the finger comes off. If they're getting stuck, please check the charging port and headset jack for corrosion and any other damage to the phone. If the phone is under warranty it may require a replacement. Please keep us posted.
    Thank you,
    MariaC_VZW
    Please follow us on Twitter @VZWSupport

  • Is there a way to adjust the font size in the digital signature?

    The attributes, of Name, Date, Location, Reason, Distinguished Name, etc. Is there a way to adjust the size of the font and the display?
    Thank you.
    Chunkee

    Hi Chunkee,
    I know it's not what you want to hear, but the answer is no. You can change the font, but not the font size because Acrobat will try to fill the signature field using dynamic sizing. I've found that id the default Helvetica is too big you can experiment with different fonts as they have different proportions and will come out different sizes.
    Steve

  • Is there a way to adjust the thickness of a WebView's scrollbars?

    Hello,
    Is there a way to adjust the thickness of a WebView's scrollbars?
    I tried the solutions mentioned here ScrollPane scrollbar size
    But they don't seem to work for WebView scrollbars.
    Thanks.

    NO

  • Is there a way to adjust the frame length when using a FFT

    Is there a way to adjust the frame length when using a FFT?
    Thanks,
    David

    I thought that to have a longer frame rate you just need to have a longer sample set.

  • Is there a way to adjust the SIZE of artwork (movies, music, etc) there used to be a "slider"

    Is there a way to adjust the SIZE of artowrk (movies, albums, etc)?

    .02,
    See two views below.  Are we talking about the same thing:

  • Is there a way to adjust the color of the Finders file labels?

    is there a way to adjust the color of the Finders file labels?

    Apple has never been good with themes or finder preferences or anything like that. From a marketing and business point of view in the past I would guess they think consistency and therefore exerted brand loyalty outweighs customization, and anyone who really wants to get their own experience will be on linux anyways.
    Nowadays coverflow, expose, smartfolders, aliases and spotlight reduce the need to differentiate between multiple files on the system by a seperate indicator and a colour.

  • Is there a way to "mix" the nodes and leaves of the tree so if they are at the same level, they will display in a specified order.

    Is there a way to "mix" the nodes and leaves of the tree so that even if they are at the same level (1,2,3...), they will display in a specified order (via sort sequence, alphabetical, etc.).
    History:
    We are using the Tree UI element to display/manage a material bom interface. We seem to be running into an issue with displaying the nodes/leaves of the tree.. regardless of the order that the context is built (which is currently the order of the exploded BOM from from CS_BOM_EXPL_MAT_V2), the bom is displayed with the nested boms at the top of each level and the single materials below them. For example. If  TK1 contains Material1, Material2, Material3, Kit1(containing component1, comp2, comp3), Material4, Kit2(containing comp4, comp5, comp6), and Material5 (in this order), the tree will display with the A level node as TK1, the next node as Kit1 (with its subleaves of comp1,comp2,comp3), Kit2(with subleaves of comp4,comp5,comp6), THEN Material1, material2, material3, material4, material5.  Our users are adamant about the items displaying in the correct order (which should be alphabetical based on the description for one report and by location for purposes of inventory for another). I've searched but not been able to locate a similar question. If I've missed it, please point me in the right direction. The users want the tree,  not a "tree" table.  This is our first attempt at the tree, so maybe we're missing something basic?
    TK1
    -Mat1
    -Mat2
    -Mat3
    -Kit1
    --Comp1
    --Comp2
    --Comp3
    -Mat4
    -Kit2
    --Comp4
    --comp5
    --comp6
    -Material5
    displays as
    TK1
    -Kit1
    --Comp1
    --Comp2
    --Comp3
    -Kit2
    --Comp4
    --Comp5
    --Comp6
    -Mat1
    -Mat2
    -Mat3
    -Mat4
    -Mat5

    co-workers said example picture is misleading.. we can make the order work if everything is a "folder" but not a mix of "folders" and "files" (if making a visual reference to the windows browser). i.e - a file is represented as an empty folder.
    TK1    
    . Mat1
    . Mat2
    . mat3
    > kit1   
    .. comp1
    .. comp2
    .. comp3
    . mat4
    > kit2
    .. comp4
    .. comp5
    .. comp6
    . mat5
    displays at
    TK1
    > kit1
    .. comp1
    .. comp2
    .. comp3
    > kit2
    .. comp4
    .. comp5
    .. comp6
    . mat1
    . mat2
    . mat3
    . mat4
    . mat5
    we can make it work if everything is a folder. This is our current workaround.
    TK1
    > mat1
    > mat2
    > mat3
    v kit1 (when expanded)
    .. comp1
    .. comp2
    .. comp3
    > mat4
    > kit2 (when not expanded)
    > mat5

  • Is there a way to display the date and time on my officejet 6500

    HP Officejet 6500a Plus Windows XP_ Is there a way to display the date and time on the display of my printer

    Are you referring to the Date and Time some cameras put right on the image?  If so there is nothing really good in iPhoto to do this. You could try the Retouch tool and see how that looks but I think you will need something more precise and powerful, like the clone tool in Aperture.
    Also something like PhotoShop or GIMP - The GNU Image Manipulation Program (free) should do what you want also.
    If your asking about some other date post back.
    regards

Maybe you are looking for

  • How to use Results from Another Query for SAP BW universes

    Hi Everyone, I have two SAP BI universes.In my First universe I have Sales Doc no (dimension) and Orderqty (Measure) and in my second universe I have Sales Doc no(Dimension) and BillQty (Measure). Here in my first dataprovider I have 1200 rows of dat

  • How to stop even administrator from coping any folder for example "c:\TempFolder" and its files in windows.

    Hi Guys I wanted to restrict windows users on desktop machines from coping folders and its files which my web services are pushing for trial purpose. i tried doing it through power shell but administrator of desktop can change the ACL permissions and

  • Multiple IDOCs from one Flat file

    HI Gurus, Sender file is of such format Header1,Item1 details Header1,Item2 Details Header2, Item1 Details Header2,item2 Details Header3, Item1 Details I need to map this file format to IDOC strucutre, In Header there is a filed which is the Key valu

  • Email adress used to send the password after a password reset

    Hi, I finally got the ampassword webapp to email the new password. Now emails are being sent by a Lotus Notes server. This server is reached thanks to sendmail. I'd like to know where I can configure the email address of the sender of the mail Thanks

  • TAXINJ Error

    Gurus, I am using TAXINJ.I have entered the tax code in PO.When i click on invoice,i am abl to ee the calculation of duties.But when i try to see the print preview the system is throwing a error msg Tax code  in procedure TAXINJ is invalid