Is there a way to automatically update events in the Outlook 2010 calendar when adding events in the iCloud calendar in Outlook 2010?

I am using Windows 7 and Outlook 2010. I have synced my Outlook calendar with my iPhone using the iCloud Control Panel. This is great, but when I add an event in the iCloud calendar in Outlook 2010 and subsequently send out invitations to the event, I get the following error:
"This meeting is not in the Calendar folder for this account. Responses to this meeting will not be tallied. Do you want to send anyway?"
I select "Yes" and the invite goes out. However, when invitees receive the email invitation, there should be 2 emails - one from Outlook and one from iCloud. The iCloud invite does not always come through. If the invitee responds to the Outlook email invite, it does not show up on the iCloud Calendar.
Is there a reason that the iCloud email is not always sent or is there a way to some how update the Windows Outlook Calendar when adding events in the iCloud Calendar through Outlook?

I have just discovered this problem as well.
Very annoying!
Now all off my meetings entered in Outlook on my desktop PC are not syncing with my ipad and iphone.
If I had known this would have happened I would never have downloaded Version 2.0 of the icloud control panel.
Does anyone know how I can get the earlier version back?

Similar Messages

Is there any way to automatically update not on cellular

Is there any way to automatically update not on cellular but on wifi like on android? I am wanting to leave update automatically on but not cellular for updates but I need cellular for iTunes match. It seams that there is no choice for wifi when available. I went through a ton of data with app updates on cellular.

Hi All updates since ios 7 can be done over Wifi I have not used a pc for updates or anything for over a year Go to settings turn cellular data off that will restrict all data to Wifi Cheers Brian

Is there a way to automatically add another of the same page while a form is being filled?

Is there a way to automatically add another of the same page while a form is being filled?
I have a two-page form of which the second page is essentially a spreadsheet analog. Often, there is need for for more lines than are available on the page. Is there a way in which to add another or even multiple copies of the second page?
Thanks ahead...
TG

You can do that with a dynamic XFA form created in LiveCycle Designer, which comes with Acrobat Pro for Windows. For more information, you can ask over at the LiveCycle Designer forum.

I recently upgraded to an iPhone 5 and I have this synced with my previous iCloud account. My problem is my old iPhone 4 is taking up 2.5 GB of space in the cloud. Is there a way to delete this iphone from the icloud so I can free up space?

I recently upgraded to an iPhone 5 and I have this synced with my previous iCloud account. My problem is my old iPhone 4 is taking up 2.5 GB of space in the cloud. Is there a way to delete this iphone from the icloud so I can free up space as it is not needed anymore?

Welcome to the Apple Community.
Assuming you have finished with your old backup.....
You can see what your iCloud storage is used for and delete any unwanted content at settings > iCloud > backup & storage > manage......

HT4759 Is there any way to find an iphone if the icloud isn't turned on?

Is there any way to find an iphone is the icloud isn't turned on?

Only by physically looking for it, or calling it and listening.

Is there a way to keep files out of the iCloud?

Is there a way to keep files out of the iCloud?

When you save them just make sure you save them to your Mac and not iCloud. For those that already exist, you can move them from iCloud by dragging and dropping them to somewhere else on your Mac. To see all the files in iCloud choose file > open in either pages or numbers.

Is there a way to mass update or replace the SPM Firefighter IDs table?

We are upgrading from GRC 5.2 to 5.3. In 5.3 FF/SPM has added an Owners field to the FF ID table (/virsa/zffusers), which is apparently a required field because I keep getting a "Invalid Firefighter ID Owner" error when I try to look at the table.
Is there a way to mass update, or perhaps import/replace, this table? I am having problems trying to update this table thru the FF table screen. When I go to save my changes, it will return the above error because not all of the FFID records have an assignment in this new Owners field. We have over 160 FFIDs, so I can't change all of the records at the same time. I can only get about 20 per screen and it will return that error again when I try to page forward.
Thanks.

Hi Bob,
that is perfectly possible - did it a few times already.
Export the table from within Firefighter, download the owners table (sorry, need to look up the name tomorrow - but you can't miss it), then add the owners through an Excel vlookup. Then re-import the table in Firefighter, and you're ste.
I'm at home right now - if you have difficulties getting this done shoot me a message tomorrow and I'll send you more details.
Frank.

Is there a way to dynamically update date in the file comments every time I save the file?

My files starts with comments on who has created them and such.
I want to update the datefield where it says it was last modified. It would be very tiresome to update it manually every time, and I am looking for a easier way.
Of course I can always check in SVN when someone did an update, but I would like to see it in the files as well.
Could anyone point out if there already is a working solution for this or if I have to hack it myself?
/Thanks

More breadcrumbs on Subversion keywork substitution.

Is there a way to automatically add a page to my current form when the user marks the check box?

I have an existing expense report form that I created using Adobe Pro's Form Tools. The user enters all the appropriate information (ie, vendor, amount, business justification, etc.) and then it calculates all the expenses at the bottom.
I have added a box next to each line item to be checked by the user in the case that they have an expense with a missing receipt.
Is there a way to have a pre-existing missing receipt form, be added at the end of the expense report, each time the user marks one of these missing receipt check boxes?
If so, is there a way to have all the expense line item data automatically fill in the information on the added missing receipt form?
I am using Adobe Pro's Form tool rather than Livecycle because it is compatible with my IPAD.
Thanks,

One word: Templates
For more information, see: page: http://livedocs.adobe.com/acrobat_sdk/9.1/Acrobat9_1_HTMLHelp/JS_Dev_Templates.80.1.html
Unfortunately, templates don't work with Reader either, unless the document is Reader-enabled with LiveCycle Reader Extensions.

Is there a way to automatically mute sound during the night?

Hello,
My 77-year old mother doesn't sleep very well and awakes evey time her Mac plays an incoming-email sound. She tries hard to turn off the sound before she goes to bed, but often forgets to do so.
I wonder if there is a way (apart from sleep or shutdown) that automatically mutes the sound from let's say 23:00 until 08:00. A command, that can be issued from Terminal.app would be fine too, I could run that from cron.
Kind regards,
Adam.
12 PBook G4 Mac OS X (10.4.8)
12 PBook G4 Mac OS X (10.4.7)

you can do that also with automator workflows, there is an action called "set computer volume", you create two workflows, the firs turn off the volume, the second turn it on. Then you can schedule them with cronnix.
hope this post can help you.

When I reload a page(or window) is there a way to automatically go back to the previous "window section" (not the upper left corner)?

I use the "reload every" add-on. It works great. The problem I am trying to solve is to keep from having to scroll down and slide right after every reload to get to the position I was in previously. In my case it is a chart of stocks on the move that I am reloading often, which is located in the middle of a page.
Is there another add-on that will solve my problem?
Thank you!

If that section has an ID or NAME attribute then you can add that to the URL (#anchor) that you want to reload.
See View > Page Source
https://support.mozilla.com/en-US/questions/774792#answer-128100

HT4489 Is there a way to import my contacts to the icloud from my pc-based Outlook Contacts?

I get an error message when I downloaded the vcard and then tried to import into iCloud.

If you deleted them and they are not in the trash can, and you did not back them up before you deleted them they are gone.

Elements 13 : 1. Is there a way to stop the automatic proposal for exemption? 2. Is there any way or an update for the manipulation of the color curves like in Gimp or Paintshop?

Elements 13 : 1. Is there a way to stop the automatic proposal for exemption?
                       2. Is there any way or an update for the manipulation of the color
                           curves like in Gimp or Paintshop?
                                                    Dankeschön für jede Antwort die weiter hilft!!

Hey Rich,
It is true that you cannot add more than 250 plots to a 2d-axis graph in the REPORT. One work around is to have the graphs stacked on top of each other and plot 250 to one graph and 250 more to another graph. I am including a TDR (you have to unzip it) file that has 12 2d-axis stacked on top of each other. Most of the properties have been made invisible through the graph properties. You can still see the legends however. One caveat to this is that you will have issues accessing the different graphs. You have to do it from a VBScript. The following line of code worked for me:
Call GraphObjOpen("2DAxis" + Str(NewAxis))
Where NewAxis is a variable that defines which graph I want to look at. You would of course have to loop through the graphs as you add data.
Cheers,
jigg
CTA, CLA
teststandhelp.com
~Will work for kudos and/or BBQ~
Attachments:
12PlotStack.zip ‏12 KB

When downloading iTunes onto a new computer, is there any way to automatically import old music files? Last time I got a new computer I didn't have to use an external drive to update my music library.

When downloading iTunes onto a new computer, is there any way to automatically important songs from your previous computer? I recently cracked the screen on my computer and cannot access any files. Last time I got a new computer my iTunes media files automatically appeared in my iTunes when I downloaded it, and I did not have to use my external drive. Is this still possible?

If your backup copy of the old computer was not stolen, then use it to put everything back.

I have an old MacBook (Mac OSX 10.5.8) with iPhoto '08. Is there any way to back up not only the photos, but the way I have organized them into events and labeled them?

I have an old MacBook (Mac OSX 10.5.8) with iPhoto '08. Is there any way to back up not only the photos, but the way I have organized them into events and labeled them?

Yes. Back up the Library.
Most Simple Back Up:
Drag the iPhoto Library from your Pictures Folder to another Disk. This will make a copy on that disk.
Slightly more complex: Use an app that will do incremental back ups. This is a very good way to work. The first time you run the back up the app will make a complete copy of the Library. Thereafter it will update the back up with the changes you have made. That makes subsequent back ups much faster. Many of these apps also have scheduling capabilities: So set it up and it will do the back up automatically.
Example of such apps: Chronosync - but there are many others. Search on MacUpdate or the App Store

Is there a way to automatically update events in the Outlook 2010 calendar when adding events in the iCloud calendar in Outlook 2010?

Similar Messages

Maybe you are looking for