Is there a way to change 'Find in page' to put the focus back at the bottom of the page? (FF 12.0)

With the update to Firefox 12, using the 'Find in page' feature now centers results on the page (see https://bugzilla.mozilla.org/show_bug.cgi?id=171237 for specifics). I checked the about:config page and I don't see anything that would change this back to the prior behaviour. I find myself struggling at time to find the highlighted text now, whereas before I knew exactly where to expect it on the page.
Is there any way to go back to this earlier behaviour without having to revert to an earlier version?

It's not uncommon for add-on authors to find ways to undo changes to Firefox after a new release. Without an add-on, I ''suspect'' there's no easy way to get at this.

Similar Messages

Some PDF files and other emails do not display the whole page. Is there a way to change that?

Some PDF files and other emails do not display the whole page. Is there a way to change that?

If an app does not behave as expected, try closing the app completely and reboot the iPad. It appears as though you have the original iPad. It helps if you list your iPad model and the iOS that you are running.
Tap the home button once. Then tap the home button twice and the recents tray will appear at the bottom of the screen. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner of the app that you want to close. Tap the home button twice.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

HT5275 When I download an attachment, it doesn't open in a new window. It goes to my finder, but I must click on an email attachment at least 3 times in order to find it there. Is there a way to change the preferences to simply open attachment in a new

When I download an attachment, it doesn't open in a new window. It goes to my finder, but I must click on an email attachment at least 3 times in order to find it there. Is there a way to change the preferences to simply open attachment in a new window?

http://www.apple.com/feedback/kaywerty wrote:
A rather long winded way of asking if anybody knows if it's possible to have multi-windows open
It's not possible.
Suggestions here -> Apple Product feedback

Is there a way to change the color of the Bezier Curves and points to a different color other than black I find it perplexing while setting points and curves working on a photo that needs to be separated from it's background for placement on transparent

Is there a way to change the color of the Bezier Curves and points to a different color other than black I find it perplexing while setting points and curves working on a photo that needs to be separated from it's background for placement on transparent backgrounds. Any thoughts?

Yes. Well, sort of: instead of a "path", set the pen tool to "shape" in the tool properties. Then set the fill colour to transparent, and the stroke colour to the colour you want. You can also set the stroke width.
Not perfect, but at least you can see the path more clearly - the anchor points and handles still remain the default colour. Open the path panel, and right-mouse click the path shape to create a selection based on that shape. The Paths panel menu also allows you to create work paths based on that shape.
Unfortunately when you try to move the handles the black thin outline appears again until you release the mouse button.
This is one of several things that works better in Photoline: in Photoline, once the path is set to a specific colour, editing the path uses the actual colour and stroke width. which is extremely handy for creating path based selection with awkward background colours and/or a high resolution screen. In Photoline the handles and bezier points are also much, much larger, which makes it rather simpler to work with as well - especially on a higher resolution screen. And when selected the handles and points are a clear red with a black outline - again easier to spot and identify. I just works better, in my opinion.

Is there a way to change the alert tone for the find my iphone app?

Is there a way to change the alert tone for the find my iphone app? The one they use from the factory is terrible! I tried it out and could hardly hear it from 5 feet away!

Welcome to the Apple community.
Unfortunately, so far as I am aware you cannot change this tone. I must admit I don't fully understand your problem, I've tried it myself and can hear it from some distance away.

My iPhone 4S is passcode locked. Is there a way to use Find My iPhone to remotely change the Passcode Lock number?

My iPhone 4S is passcode locked. Is there a way to use Find My iPhone to remotely change the Passcode Lock number?
Thanks for any advice.

You cannot remotely undo a remote lock nor remotely unlock it.

I'm on FCPX 10.1.1. Is there a way to change the speed of a keyframe effect? I have still images zooming onto the storyline, but I can't find any way to speed up or slow down the zoom time. Any help would be greatly appreciated.

Is there a way to change the speed of a keyframe zoom effect on still photos? Clip duration doesn't seem to change the zoom speed at all. Any help would be greatly appreciated

Open the video animation (Control-v). In transform>All click and drag the X and Y keyframes (which should be together) – left to speed up the scale change and right to slow it down . It may take a little practice to get this to work (I seldom get it right the first try).
You could do this individually for each clip, or you wanted to adjust multiple clips you can copy and paste attributes to your other other clips.
Russ

Is there a way to change the standard email message?

Hi,
I'd rather not have the message "Russ Conte has invited you to ..." as the message that is sent out for each invitation. Is there a way to change that without having to go in and change every single time it is used? Is there a preference for the text that is used, so I can edit it to be what I want?
I'm using iCal 2.0.5
Mac OS X 10.4.11
MacBook Pro 2.33 GHZ, 2 MB RAM
Any help or advice is most appreciated.
Thanks,
Russ Conte

At your own risk ...
Ctrl-click on the iCal.app file in Applications and select Show Package Contents. Locate the English.lproj folder in the Resources folder of the Contents. Find file ITIP.strings and make a duplicate (so we can restore if things go badly). Open ITIP.strings with a text editor (BBEdit, TextEdit or whatever you use yourself). Scroll down to find
/* Mail body when sending an invitation to an event (IP 56) */
"%@ has invited you to the iCal event: %@, scheduled for %@ at %@ (%@). To accept or decline this invitation, click the link below.\n" = "%@ has invited you to the iCal event: %@, scheduled for %@ at %@ (%@). To accept or decline this invitation, click the link below.\n";
The text that is used (and that you can change) is the text to the right of the "=". You may need to restart iCal after saving any changes. It is quite possible that your changes, if they work, will not survive software updates.
AK

Is there a way to change the addresses used in an existing iMessage thread?

This is kind of a multi-part question. Let me describe my scenario.
I have many iMessage threads with other iPhone users where the "reply" addresses for one or both ends are the phone *numbers* instead of AppleID email addresses. (This could be due to a number of factors... either they had their "Start new conversations from" address set to their phone number, and/or they started a new conversation with me sending it to my phone number. How it *got* that way doesn't really matter). I want to be able to change the addresses of the conversation to AppleID's (so that I'll still get messages when I change SIM cards, among other reasons).
With iOS 8's new ability to add/remove people from conversations, I thought I would be able to add the AppleID address and remove the phone number address, but there are two problems with that: 1) iOS 8 seems to only allow this for conversations which began as multi-person conversations, and 2) it doesn't seem to want to let you add addresses for people who are already recipients via another address (in other words, if Alice is already on the conversation via her phone number, I can't add her AppleID to the conversation). I guess I could remove the person first, and then re-add them with the other address... but I'd feel safer if I could add the next one before removing the first one.
I know I could just tell the other person to delete our thread and start a new one, but I don't want to lose all of our dialogue and pictures (and I don't want to have to manually save it).
So, the questions:
Is there a way to change the address my counterparty is sending to when they make further replies to our conversation?
Is there a way to change the address I send to when I make further replies to the conversation?
Is there a way to change the default address to use when trying to send someone an iMessage? (What I'm after here is a way to craft my "contact" entry in people's phones so that, when they try to send a message to me and start typing my name, my preferred address comes up on top).
As it looks like the only way to do this might be to use iOS 8's method of adding/removing recipients, is there a way of converting a two-person conversation into a multi-person one?

I think I may have solved it, actually. I find that if I switch the timecode to NDF in the source viewer, it seems to work. I have tried it on three clips and they have sync'd without problems. Hopefully this will continue to be the case.

Apple Mail, is there a way to change the default time-out?

This has been puzzling me for some time and I have not found a solution. The problem which I also posted in the Mail forum (though I think that if there is a positive answer it will come through here) is as follows:
I have an email account with on my company's mail server which is actually a Novell Netware server with a POP3 service. When using mail to send mail, I have no problems. When using mail to recieve mail, well, sometimes it gets the mail, and sometimes it does not. Usually, I can recieve mail for two or three weeks then it just stops working. No changes to my system, no updates or anything, I recieve email at one point in the day and then 15 minutes later - nothing. In the Activity Monitor, I see "Connecting to ..." then "Sending Password" then "Checking for Messages", then (after a while) it beeps as if it did not find any messages to download (no error!).
Some weeks later, after suffering with webmail, suddenly, it works again. This usually coincides with maintenance on the server, but not always. It also seems to correspond with a general improvement of the server performance. But eventually, the cycle starts over again with mail suddenly not able to find any new messages for that account.
I use dial-up at home, ethernet LAN at work, and DSL at our satellite offices. When it works on one it works on all. Also note that my other email accounts (not in any way connected to my company) work as they should at all times and in each setting.
Is it possible that mail simply times out before the messages are discovered. The Novell server used for mail is by no means known for its performance. If so, is there anyway to change the default timeout in mail for "Checking for Messages"?
Things I have tried:
I have dumped the "MessageUidsAlreadyDownloaded" and "MessageUidsAlreadyDownloaded2" files to no avail.
I have changed computers (I recently upgraded from a ti400), reinstalled the OS, upgraded from 10.2.8 to 10.3.x to 10.4.3, and removed and recreated the mail account (multiple times), all to no avail.
Based on the above observations, I feel that it may be that "Mail's" "Get-mail" function is timing out before new messages are discovered on a very slow server. Is there any way to change the default time-out to evaluate this hypothesis?
Any help would be appreciated.
Kraig

I already thought of that one. I deleted my account from there. But it didn't default to the other one. It just told me I needed to add an account. Thanks tho

My ipod touch has a old email account associated with itunes. I don't remember the password to the old account and when I enter my birthdate it locks up the ipod - is there a way to change my ipod through my computer

My ipod touch has an old email account assoicated with itunes. I no longer remember the password associated with this email and since it is gone I can't retrieve password by sending to email account. When I try to retrieve by hints it locks up when i enter birth month and day. Is there a way to change my Ipod through my computer? I have searched and can't find it. Thanks

How to reset the password and other items are here.
\Frequently Asked Questions About Apple ID
http://support.apple.com/kb/he37 You can do it through a computer. After resetting the password and other stuff, on the iPod go to Settings>Store and sign out of the account and then sign back in.

Is there a way to change the Windows Update service startup type on Windows Server 2012 R2?

We have a number of newly built 2012 R2 servers that we have HP Operations Manager agent running on that monitors the status of several services and reports if they are "stopped". One of these services is Windows Update. Every day we
get at least one alert saying:
"Service "Windows Update" is not started. Current state is stopped"
Checking the event logs shows that the Windows Update service stops, then a while later it just starts again. Not an error, just an information event.
In Windows 2012 R2 the Windows Update service is set to "Automatic (Trigger Start)", where in previous versions we run (2012/2008R2) it would be set to just "Automatic" or "Automatic (Delayed Start)"
I have come to understand that this behaviour is normal for Windows 2012 R2, and that Trigger Start services by design stop themselves after a period of inactivity. I was unable to find any info on how this works. Our client would like this to
be changed and the Windows Update service stay running all the time, understanding that this impacts performance.
Is there a way to change the Windows Update service in Server 2012 R2 to the old Automatic startup behaviour so that it stays running all the time instead of stopping and starting periodicall? There is no option to do this via the services mmc
gui.
So far I have tried:
Removing the Triggers using the command: sc triggerinfo wuauserv delete
This works temporarily, the service then shows as just Automatic in the services console, however if you restart the server or restart the service it goes right back to being Automatic (Trigger Start).
Any kind of help would be appreciated.

This one might help.
Allow configuration of Automatic Updates in Windows 8 and Windows Server 2012
Regards, Dave Patrick ....
Microsoft Certified Professional
Microsoft MVP [Windows]
Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.

Is there a way to change the duration of a group of selected clips all at once?

Hi all,
I'm working with good old Premiere 6 on Windows 7.
Is there a way to change the duration of a group of selected clips all at once? If I have a large group of clips in my timeline that are all the same duration, once I've selected them all in a group, can I somehow change the frame number duration of all the clips at the same time?
I've found other things that can be done to a group of clips at the same time, but I can't find a way to change the duration of a group of selected clips.
Thanks,
digi

Thanks Jim and Bill,
In my efforts to work around the problems with the distortion and horizontal interlace lines that come when using the Motion Settings, I'm doing stop frame animation with hundreds and hundreds of layers in PSDs in multiple files placed in hundreds of one, four and six frame sections in Premiere, so if I find that I need to change the number of frames per clip in hundreds of consecutive clips (not actual duration of speed changes), then I need to pull out the right side of hundreds of frames after first moving them apart enough to allow for changing them if I'm making them longer.
These animations are different from the rotating reel animations in that they are for laterally moving subjects that are long streams of moving graphics and photos.
I read about "clip nesting", but I think that only applies to clips or groups of clips that are the same, whereas my clips are each from different imported layers times 125 or so, consecutively placed one after another to create the laterally moving stop frame animation.
Now I've tried johnbmx4christ's alternate method of creating rotations that was just posted on the other thread about the rotation distortion, but that method results in the same oblong distortion and messed up looking horizontal interlace lines.
What a can of worms.
Thanks,
digi

Is there a way to change info on multiple contacts simultaniously?

Greetings.
I have a group that has 50 contacts in it. Each contact has name, company, and email address. Is there a way to add address, city, state in the address fields to all contact all at once, or is this something that has to be done with each individual contact?
I'm hoping there is a way to automate this. I have about 400 groups, with lots of contacts that I'd like to update with address info if it's not a nightmare.
Thanks.
Jonathan

So outside of learning how to use automator or start learning scripting, theres no way of doing this?
So if you have 200 people in a group at the same company and the company changes it's name or address you have to manually go in and change each individual card entry?
There has to be some find/change thing.
Anyone else?
Thanks.
Jonathan

The new dark gray background of the firefox 6, is there a way to make it white again? It dark gray back makes it hard to view. PLEASE Help, or can get back to Firefox 5? Otherwise I have to change to safari. Can not stand the dark background!!

I have been a firefox user for quite a while and have loved it. I can't even count how many people I convinced to switch from boring old Explorer to Firefox, but after this latest update, I got so frustrated I uninstalled it. I just reinstalled it again in the hopes that you guys had "corrected" the background issue, only to be disappointed. I would love to continue using firefox, but find it very difficult to deal with the "new look" which puts a dark gray background on previously white background making visually unappealing and hard to read. Please tell me if there is way to change that or a way to go back to previous version, otherwise I will have sadly move to safari or chrome or heavens forbid explorer! Thanks.
Naya

Firefox 4 requires at least OS X 10.5 and an Intel Mac.
* http://www.mozilla.com/firefox/4.0/system-requirements/
For Mac OS X 10.4.11 or Mac OS X 10.5.8 you can look at:
* http://www.floodgap.com/software/tenfourfox/
Firefox 3.6.x can be found here:
* http://www.mozilla.com/en-US/firefox/all-older.html

Is there a way to change 'Find in page' to put the focus back at the bottom of the page? (FF 12.0)

Similar Messages

Maybe you are looking for