Is there a way to create multiple BQY output to one of the Job File ?

Hello,
I am using EPM11.1.2.3.501 version.
BQY report due to the large amount of data, it is difficult to use a WebClient.
So will share on a quarterly basis.
However,
If modifications are to occur,There are difficulties must modify each file.
For example,
Register 2014 1Q, 2014 2Q, 2014 3Q, 2014 4Q BQY Job file.
When you run the job, the output of the job file is created.
If the job file is changed, you must modify all four files.
This will be only grow ations.
Is there a way to create multiple BQY output to one of the Job File ??
Please help me.
Thanks

It is not possible to have multiple BQY outpu into a job file.
Thanks,
KK

Similar Messages

Is there a way to create multiple map tile layers at once?

Hello experts,
I have a small problem. It's mainly a matter of saving some time. I need to create 51 map tile layers in mapviewer, and I would like to this this at one time. I can go to the admin console-->Management-->Manage Map Tile Layers-->Create, and then I can create one at a time. But it really would be nice to create them all at once!
I tried using the XML mode interface, and I can use the following code to create one map tile layer:
<?xml version="1.0" standalone="yes"?>
<map_tile_server_admin_request>
<create_map_tile_layer data_source="xxxx">
    <map_tile_layer
        name="FOUNDATION"
        http_header_expires="168"
        image_format="PNG">
      <internal_map_source base_map="FOUNDATION"/>
      <tile_storage root_path="/scratch/tilecache" />
      <coordinate_system
          srid="8265"
          minX="-180" maxX="180" minY="-90" maxY="90"/>
      <tile_image width="250" height="250" />
      <zoom_levels levels="10" min_scale="5000" max_scale="10000000">
      </zoom_levels>
    </map_tile_layer>
</create_map_tile_layer>
</map_tile_server_admin_request> And it creates one layer. But when I try this:
<?xml version="1.0" standalone="yes"?>
<map_tile_server_admin_request>
<create_map_tile_layer data_source="xxxx">
    <map_tile_layer
        name="FOUNDATION"
        http_header_expires="168"
        image_format="PNG">
      <internal_map_source base_map="FOUNDATION"/>
      <tile_storage root_path="/scratch/tilecache" />
      <coordinate_system
          srid="8265"
          minX="-180" maxX="180" minY="-90" maxY="90"/>
      <tile_image width="250" height="250" />
      <zoom_levels levels="10" min_scale="5000" max_scale="10000000">
      </zoom_levels>
    </map_tile_layer>
</create_map_tile_layer>
<create_map_tile_layer data_source="xxxx">
    <map_tile_layer
        name="FOUNDATION_WY"
        http_header_expires="168"
        image_format="PNG">
      <internal_map_source base_map="FOUNDATION_WY"/>
      <tile_storage root_path="/scratch/tilecache" />
      <coordinate_system
          srid="8265"
          minX="-180" maxX="180" minY="-90" maxY="90"/>
      <tile_image width="250" height="250" />
      <zoom_levels levels="10" min_scale="5000" max_scale="10000000">
      </zoom_levels>
    </map_tile_layer>
</create_map_tile_layer>
</map_tile_server_admin_request>...it creates only the first map tile layer in my xml request.
Is there any way to create multiple map tile layers at once?
Thank you!
John

Michael,
It looks like you are right! Thank you for your help.
I still have a small concern. I looked at the documentation and it reads,
"The configuration settings for a cache instance are stored in the USER_SDO_CACHED_MAPS metadata view. You should normally not manipulate this view directly, but should instead use the MapViewer administration tool, which uses this view to configure map cache instances."
But, I tried inserting records into USER_SDO_CACHED_MAPS and it works, and I can't really see any reason not to directly insert records into this table, so...
Perhaps that warning is there simply because potentially you could screw things up tinkering with the table directly.
Cheers!
John

Is there any way to create multiple users in a single shot in oracle db

Can Any one tell me, is there any way to create multiple users in a single shot in oracle database.

Hello Nunhum,
I guess this was not my question.. This is not what I m asking.. I know there is not a single sql statement in oracle ,which could create multiusers alike UNIX/LINUX(OS LEVEL), Whatever you have written..is simple creating them one by one.
What I am expecting is to have PL/SQL statement which could help us in this regard.

HT1918 Is there a way to consolidate multiple Apple IDs into one if they are all issued to the same persons(s)?

Is there a way to consolidate multiple Apple IDs into one if they are all issued to the same persons(s)?

No. Unfortunately, you can't combine Apple IDs togetehr, even if you own them all.

Is there a way to create an email alert in iCal on the iPhone (as it's possible to do on the laptop)?

Is there a way to create an email alert in iCal on the iPhone (as it's possible to do on the laptop)?

Nope.
You might be able to find another calendar app that can do that in the App Store.
And, you can always leave Apple feedback here -> Apple - iPhone - Feedback

Is there any way to create admin role only for one resource.

Hi all,
I am trying to create an admin role with 'update user' capability. But I want to restrict the user(with the admin role) to be able to update a user's attribute only for one resource, The user(with the admin role) should not be able to update the attributes of the other resources which a user have.
Is there any way to create admin role only for one resource?
I customized the tabbed user form to show only one resource attribute (deleting the missing fields and adding my tab for the resource) and then assigned this new User Form to the user(with the admin role) in security tab.
It works fine. But the problem is that if any user(with the admin role) is also admin of some other resource then he/she will not be able to view the other resource attributes.
Please suggest,
thanks

The loop function always repeats the same region so of course the fade is also copied. So option+drag the original region to make a (non clone) copy, fade the first region and loop the second one (which you just copied).

Is there a way to move multiple Calendar items from one date to another?

Hello. I have far too many Calendar items every day in my iCal. Until I finally pare them down to a reasonable level, I need to "reschedule" all of my unfinished ToDo items and reminders, to another day, later in the week.
There doesn't seem to be any "Select All" feature available.
Is there a way to move multiple Calendar items from one date to another?
Thanks in advance!

Still no ideas? Apple, please come up with a fix. Thanks.

Is there a way to send multiple pdf's in one email from iBooks? I have several that I've saved that I need to send to one person. If it can't be done directly, is there a work around?

Is there a way to send multiple PDF documents from iBooks in one email? I have several that need to be sent to one person and can't figure out how to send more than one at a time. If you can't, is there a workaround?

Warehouse that PDF on your own server, then link to it from your book.
Ken

SCOM 2012 - Is there a way to create a class/target/group based on the presence of a folder?

I need to create monitor(s) for an application, but the application services are different on all the servers. Usually I would find a application service that is common among all the servers I want to monitor to create the target,
but this does not exist. There are no common services for this application. However, every server does have a common folder in the Program Files on the C: drive (i.e. "xyz" folder exist on every server for the application).
Is there a way to create a target based on a folder in the Programs Folder?

Please refer to the following, which is quite exactly fit your requirement.
http://msdn.microsoft.com/en-us/library/bb437613.aspx
Roger

Is there a way to acknowledge multiple ical notifications at one time?

I turned on an iBook I haven't used is almost 2 years. ical popped up reminders from two years ago. Is there a way to acknowledge these reminders all at one time?

Filter the mail based on mail addressed "To: (Your email address). The action is to send it to the "trash " folder. In effect, the trash folder automatically becomes your Inbox. Save what you want by moving items from trash. Then touch "edit" "delete all".

Is there a way to create multiple New Tabs pages and name them?

This feature is great but I would like to be able to create multiple new tabs pages and label them. This would be more useful than tabs groups that all load at once.

No that is (currently) not possible.
It will be possible in future Firefox version to specify the number of rows and columns.
*[https://bugzilla.mozilla.org/show_bug.cgi?id=752841 bug 752841] - [New Tab Page] make the number of tabs adjustable
<i>([https://bugzilla.mozilla.org/page.cgi?id=etiquette.html please do not comment in bug reports])</i>

Is there a way to embed multiple javafx components to one html

Hi All,
I have created a javafx component which is similar to the speed meter. Currently I have now embedded one instance of that speed meter. But I tried to put another one as the same but it didn't work where only one instance worked. Is there any way to resolve this issue to have multiple instance of it or are there any alternatives. Please guide me on this to put multiple instance of the same jar or any other good alternative solution.
Thanks in Advance
cheers
Maha

Still no ideas? Apple, please come up with a fix. Thanks.

Is there a way to create an endless loop of one playlist?

I have a playlist where I would like to create an endless loop. Is there a way to accomplish this task? Software Version 1.2.
Someplace I read about going into Settings and down to "repeat" and selecting "all." The settings on my iPod Nano does not show "repeat" in the Settings.

Start your playlist and tap on the screen while the song is playing. Tap on the repeat symbol showing on the screen then select the repeat list symbol on the left hand side.
http://manuals.info.apple.com/en_US/iPod_nano_6thgen_User_Guide.pdf
Message was edited by: deggie

Is there a way to create a virtual network using C# and the Azure SDK/API?

I don't see a clear way to create an Azure Virtual Network using the SDK.
I have all the methods to create the virtual network configuration, but no way to submit it:
IList<string> VirtualNetworkAddressPrefixes = new List<string>();
IList<string> LocalNetworkAddressPrefixes = new List<string>();
IList<NetworkListResponse.DnsServer> DNSServers = new List<NetworkListResponse.DnsServer>();
IList<NetworkListResponse.Subnet> Subnets = new List<NetworkListResponse.Subnet>();
NetworkListResponse.Gateway Gateway = new NetworkListResponse.Gateway();
IList<NetworkListResponse.LocalNetworkSite> LocalSites = new List<NetworkListResponse.LocalNetworkSite>();
IList<NetworkListResponse.Connection> Connections = new List<NetworkListResponse.Connection>();
VirtualNetworkAddressPrefixes.Add("a.b.c.d/cidr");
DNSServers.Add(new NetworkListResponse.DnsServer() { Name = "TestDNS1", Address = "a.b.c.d" });
Subnets.Add(new NetworkListResponse.Subnet() { Name = "Subnet-1", AddressPrefix = "a.b.c.d/cidr" });
Subnets.Add(new NetworkListResponse.Subnet() { Name = "GatewaySubnet", AddressPrefix = "a.b.c.d/cidr" });
Connections.Add(new NetworkListResponse.Connection() { Type = LocalNetworkConnectionType.IPSecurity });
LocalNetworkAddressPrefixes.Add("a.b.c.d/cidr");
LocalSites.Add(new NetworkListResponse.LocalNetworkSite()
Name = "On-Prem",
Connections = Connections,
VpnGatewayAddress = "a.b.c.d",
AddressSpace = new NetworkListResponse.AddressSpace() { AddressPrefixes = LocalNetworkAddressPrefixes }
Gateway.Sites = LocalSites;
Gateway.Profile = GatewayProfile.ExtraLarge;
NetworkManagementClient netMgmtClient = new NetworkManagementClient(CloudCredentials);
NetworkListResponse netlistresp = GlobalSettings.mainWindow.netMgmtClient.Networks.List();
netlistresp.VirtualNetworkSites
.Add(new NetworkListResponse.VirtualNetworkSite()
Name = "TestVirtualNetwork",
AddressSpace = new NetworkListResponse.AddressSpace() { AddressPrefixes = VirtualNetworkAddressPrefixes },
DnsServers = DNSServers,
Subnets = Subnets,
AffinityGroup = "East US",
Gateway = Gateway,
Label = "LabelValue"
I have also created the entire XML response and sent it to the NetworkManagementClient -> Networks.SetConfiguration() method, but it appears this command expects the virtual network to already be in existence. If anyone could give guidance, it would be
appreciated.

Hi,
As discuss above , we have to create the XML response ,before that first you have to
GetConfiguration() details of existing virtual network.
string.format("@<NetworkConfiguration xmlns:xsd='http://www.w3.org/2001/XMLSchema' xmlns:xsi='http://www.w3.org/2001/XMLSchema-instance' xmlns='http://schemas.microsoft.com/ServiceHosting/2011/07/NetworkConfiguration'>
<VirtualNetworkConfiguration>
<Dns />
<VirtualNetworkSites>
<VirtualNetworkSite name=""{0}"" Location=""{1}"">
<AddressSpace>
<AddressPrefix>10.0.0.0/8</AddressPrefix>
</AddressSpace>
<Subnets>
<Subnet name=""Subnet-2"">
<AddressPrefix>10.0.0.0/11</AddressPrefix>
</Subnet>
</Subnets>
</VirtualNetworkSite>",Networkname,location)+(@"<VirtualNetworkSite name=""demodsf1"" Location=""West Europe"">
<AddressSpace>
<AddressPrefix>10.0.0.0/8</AddressPrefix>
</AddressSpace>
<Subnets>
<Subnet name=""Subnet-1"">
<AddressPrefix>10.0.0.0/11</AddressPrefix>
</Subnet>
</Subnets>
</VirtualNetworkSite> </VirtualNetworkSites>
</VirtualNetworkConfiguration>
</NetworkConfiguration>")
you have to append the node for existing node with new values , i got it its adding new virtual network
Best regards,

Is there a way to create a iTunes U feed using .pdf or .epub files using a Podcast Producer 2 backend?

I'm in the process of creating an iTunes U site for my university. We are in the process of activating an Xserve running Snow Leopard and Podcast Producer 2 to server as a backend and trying to figure out how to create various workflows and feeds for populating both the Public SIte Manager "public site" and the authenticated "private site". So far, I have not found any information regrading how to upload .pdfs or .epub documents using Podcast Composer or Podcast Capture. Is this possible?

WorMzy wrote:
It depends where you extract the file to. If you extract it to your home directory so you can examine it's content, there's no problem -- it's just a static file. If you're extracting it over the existing file (in this case /etc/fstab), then you may end up screwing up permissions/ownership.
I've not experimented with redirection enough to know whether the original file's permissions are preserved.
maybe a chmod fix if needed?
So I am having a problem because it keeps saying fstab might be a file and when I query I do not see the package /file. So help me understand by this similar question.
This works fine.
# pacman -S iw wpa_supplicant
but using query does not find any package that resembles iw wpa_supplicant
# pacman -Q
Nothing in the list resembles the package above. It seems to me I just do not understand repositories (I think that is what these are called).
Is there a good link or article that can clear this up? Also... how can I find out how to query files that contain certain characters in the package name such as lib* or *lib*?

Is there a way to create multiple BQY output to one of the Job File ?

Similar Messages

Maybe you are looking for