Is there a way to disable the auto play video and audio ads that are showing up on the web these days?

A lot of sites have video ads that load and start playing while safari is loading the entire page - slows everythiing down. Also a couple news sites I go to have autoload/play content.  Is there a way to disable these auto loads?

Install the ClickToFlash or ClickToPlugin Safari extension.

Similar Messages

  • Is there a way to disable my premium sond (eq and adio enhancement?

    is there a way to disable my premium sond (eq and adio enhancement? Mine is affecting the sound at all so i'm thinking something has been disabled or something as I know I have used it before and it worked

    Hi,
    Try using Recovery Manager to reinstall your original Audio Driver ( ie Conexant, IDT etc ) - the procedure for using recovery manager to reinstall Software and Drivers is detailed in the relevant document on the link below.
    Recovery Manager - Windows 7
    Recovery Manager - Windows Vista
    After the reinstallation has completed, restart the notebook.
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • Is there a way to transfer photos from a point and shoot camera to a flash drive via the iPad?

    Is there a way to transfer photos from a point and shoot camera to a flash drive via the iPad?

    No.

  • Is there a way to program an ICE (in case of emergency) number that is accessible without unlocking the phone?  Not 911, but a family member in my contacts?

    Is there a way to program an ICE (in case of emergency) number that is accessible without unlocking the phone?  Not 911, but a family member in my contacts?

    you can now set up an Emergency Contact in 'Medical ID' in the Healh app. When someone goes to the lock screen and switched to the Emergency call, they can click on the link Medical ID and then contact your emergency person. It also lists your age, allergies, and illnesses if you need it to.

  • Having read how one might be able to send a video that is too large, it seems that those videos and still pictures that are sent, well at least for me anyway, end up 90 degrees to the horizontal...how do i send a pic, or video that is the right way up???.

    my question relates to the orientation of the videos, and still pictures that are sent via the ipad2...they always seem to be 90 degrees to the horizontal...can anyone suggest how to send them so that they will be the right way up???

    my question relates to the orientation of the videos, and still pictures that are sent via the ipad2...they always seem to be 90 degrees to the horizontal...can anyone suggest how to send them so that they will be the right way up???

  • After years of owning all things Mac, I am finally trying to use iChat, and can't get it to work. I see my buddy, but all I can do is send a message--the video and audio chat icons are gray, as is inviting to a video chat under Buddies.

    After years of owning all things Mac, I am finally trying to use iChat, and can't get it to work. I am using gmail, and I see my buddy (no camera icon next to her name), but all I can do is send a message--the video and audio chat icons are gray, as is inviting to a video chat under Buddies. My buddy has the same problem as I.  We are able to do video chat through gmail, but I had hoped to use iChat.  I am using OS 10.6.8, iChat v. 5.0.3.  What am I missing?

    HI,
    iChat will Video chat to another iChat in a Jabber Buddy List (Google run a Jabber server for GoogleTalk)
    However it will not Video to the Web Page login to iGoogle or the Web Mail Page login.  (where people can Google Chat as it were in a  Web Browser).
    Nor does it video to the Google Talk Stand alone app for PCs or any other Jabber apps on any platform.
    iChat uses a connection Process called SIP (Session Initiation Protocol) which is also used by other VoIP devices.
    Jabber/XMPP invited the Jingle Protocol for Jabber Applications.
    Google have included this in their Standalone app and the Plug-in for Web Browsers on both PCs and Mac (you can get this as a Standalone Plug-in or as part of Chrome)
    More on this here  This article has been changed several time in the recent months.  It now claims a greater involvement by Google in writing the Jingle Library (Although now Google's version does not work with the others)
    This tends to mean that using the web Login to Google to Chat also cannot video chat to other Jabber apps that are using Jingle.
    If your Buddy is using iChat then check the Video Menu has two items to Enable Camera/Video chat and Microphone/Audio chats are ticked.
    In the View Menu the Show Status Items should be ticked (Selecting them toggles the tick and the function On or Off)
    It could be Internet speed but at this stage I would doubt this at this stage.
    10:27 PM      Saturday; January 21, 2012
    Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
      iMac 2.5Ghz 5i 2011 (Lion 10.7.2)
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb (Snow Leopard 10.6.8)
     Mac OS X (10.6.8),
    "Limit the Logs to the Bits above Binary Images."  No, Seriously

  • What should be the quality of video and audio for bandwidth 768KB

    Hello Friends
    We are provoding 768kB bandwidth for our connection. Can any body tell us what should be the quality of video and audio we can set that does not effect frame rate which is 24 FPS.
    thanks in advance.

    Hi Samir
    You could try out the bitrate calculator at http://www.adobe.com/devnet/flash/apps/flv_bitrate_calculator/ . It lets you try various encoding settings to see what fits best for the bandwidth available to you.
    Regards
    Mamata

  • If I do a repair the windows small business server 2011 standard repair console, will I loose the user's and computer's that are currently setup on the server ?

     will I loose the user's and computer's that are currently setup on the server?

    Hi,
    Based on your description, I understand you want to repair SBS 2011 console (please refer to
    the TechNet article:
    Repair the Windows Small Business Server 2011 Standard Console). However, worry about losing users and groups that be created by Windows SBS Console. As far as I know, those will not lose.
    Since, when you create users and groups via SBS console, those are added to Activity Directory.
    The SBS console is a GUI component, which makes it easy to configure and manage your Windows SBS 2011 Standard network. When you repair the SBS console, this component will be affected.
    In view of your concerns, please back up before operation. It will help us to avoid some unexpected
    issue.
    Hope this helps.
    Best regards,
    Justin Gu

  • TS4498 Is it possible to support Logic in 32-bit plug-ins in future updates? How about to make a bridge built in Logic. I would have long ago moved on to a new version of Logic, but I have the equipment (UAD-1 and Liquid Mix), which are not run on the Loq

    Is it possible to support Logic in 32-bit plug-ins in future updates? How about to make a bridge built in Logic. I would have long ago moved on to a new version of Logic, but I have the equipment (UAD-1 and Liquid Mix), which are not run on the Loqic X. So I would suggest to make a bridge in Logic X. As it was in version 9 of the Logic.

    In addition.. Focusrite have stated they will not be releasing a 64bit version of Liquid Mix as they consider it outdated software these days.... even though at one point a limited release beta version had a 64bit AU version included but it was so unstable it was rapidly dropped...
    However the 32bit to 64bit bridge plugin 32 Lives,  states it will handle and 'convert' the Stereo version of Liquid Mix to 64bit but not the Mono version... within LPX
    http://www.soundradix.com/products/32-lives/compatibility
    Finally, like others here, I would be extremely surprised if Apple added 32bit AU support back into LPX..  That '32bit tech' is long dead and gone....in terms of modern DAWs... as it is in other DAWs such as the recent PT versions...

  • I have a clip with synchronized audio. When I trim a section of video it does not trim the audio. How do I trim both video and audio so that the clip remains in sync?

    Why is FCPX not allow me to cut both video and audio tracks at the same time?
    My separate synchronized audio does not trim when I trim the video. They are connected and synchronized.

    fulei wrote:
    The audio track does not edit along with the video. They go out of sync
    Sounds like a different problem than your trim problem in the first post. If your problem is they drift out of sync, we'd need to knoow more about the project and clip properties – including how the audio file you're syncing to was created.
    Russ

  • Is there any way to put a book on itunes and sell it for a higher price than the pricing tiers?

    I am selling my medical textbooks on paper for around $90-100.  When I was in the process of loading the epubs into itunes connect, the pricing tier maxed out at 39.99.  I sell other books in my field selling on itunes for around $180, which is similar to the paper versions.  Is there a way around the pricing tiers.  I have no problem with creating a new title if necessary.
    Thanks

    Correction to first post
    I am selling my medical textbooks on paper for around $90-100. When I was in the process of loading the epubs into itunes connect, the pricing tier maxed out at 39.99. I see other books in my field selling on itunes for around $180, which is similar to the paper versions. Is there a way around the pricing tiers. I have no problem with creating a new title if necessary.
    Thanks

  • Is there a way to put an ICE (In Case of Emergency) entry that is available without unlocking the iPhone?

    I am thinking that it would be a real enhancement (although I hope I would never actually need it) to have an ICE entry that is available without unlocking my phone. I use a passcode on my phone so if I were incapacitated in some way it would be good if emergency responders could get to my ICE entry. Ideally it would also have a place to list meds that I take and any important medical conditions that might be relevant. Obviously, not everyone would want to list this stuff in a way that could be access by unauthorized people, but many (maybe most) people would really benefit from it. For example, if I had high blood pressure and was taking meds for it, that might be sometheng that an EMT or ER Doctor might want to know before treating me. Lots of people wear medical id tags but this would be better, I think.

    You could put an ICE number on your Lock Screen Wallpaper.  The finder could then call that number from another phone.
    I have this on my Lock Screen Wallpaper... "This iPhone belongs to xxxx xxxx.  If found, please call xxx-xxx-xxxx".  I created it using the Notes app, took a screenshot and then selected that as my wallpaper.

  • Picture Frame will not play vidoe, only stills. Is there a way  to enable it to play video?

    Picture Frame will only play the stills in my photo albums, not the video. Is there a way to enable it to do both?

    Yvonne-
    I haven't tried videos on my camera yet.  Do you use the Videos App to play them?  I don't think they will play in the Photos App.
    If yours are in a format that is not in Vazandrew's list, you may need to sync them to your computer and convert them to M4V or MP4 format.  You can use a program like HandBrake to do the conversion.  <HandBrake>  Once converted, you can sync them back to the iPad and they should play.
    This may not meet your needs, but the alternative appears to be getting a different camera.  I don't know of another Video App that might work.
    Fred

  • In my Itunes page the add play list and all other buttons are missing

    In my Itunes the add play list button and all others at the buttom of the page are not visiable hos anyone else run into this problem?

    Hi kirsty1211,
    If you are having issues downloading your purchases to your laptop, you may find the following articles helpful:
    Apple Support: Downloading past purchases from the App Store, iBookstore, and iTunes Store
    http://support.apple.com/kb/HT2519
    iTunes Store: Troubleshooting iTunes Match
    http://support.apple.com/kb/ts4054
    Regards,
    - Brenden

  • Is there a way to drop an image into indesign and then have that file name captioned underneath?

    Hello! I'm looking to help a colleague into streamlining a process. We have to display images full page in an Indesign Document and every time we drop and image onto a page, we then need to edit the caption underneath with the file name. Just wondering if there is a way to automate this process? Any scripts available?

    When you place an image you can turn on the capture function. There are normal and live versions. The normal labeling creates a text as text is, the live version creates a variable which would change if the image or the text in the meta information changes, but it behaves like a single character which causes problems how the text will run in the text frame.
    What is drawn out of the Meta must be set up before in the caption set up option.
    When you drag and drop an image from the finder or from Bridge you can't activate this option.
    BTW I use it a different way which seems to me faster. I assign a shortcut to the labeling command and when I have imported the image, I click this shortcut and in a second step I apply an Object style which will format the text frame including Paragraph style which might be different on a dark or bright photo or upon a graphic.
    Normally I edit all meta information in Adobe Bridge, which is the fastest way to handle it.

Maybe you are looking for

  • Automatic PGA Memory Management in 9i and 10g

    Hi, I read the Doc# 223730.1 for Auto PGA advisory. At one point in the document, there is given a query to calculate percentage of times work areas were executed in optimal, one-pass, or multi-pass mode since start-up. My question is why there is a

  • Compile project from Ant Task

    Hi, I saw that there are some Ant Tasks with the BPM, but couldn't find any task that is able to just compile and generate the .exp file of the proyect. We wanted to implement a continuous integration server that compile all the projects that we have

  • Project Structure Saving

    Dear all; i have a problem when saving projects specially in CJ20N. the entire structure is expanded (WBS's, Networks, Activities, Copmponents,... etc.). and all the data is read before the saving process takes place. So for large customers' projects

  • One Airport Express, Two Computers

    My wife has her own Macbook, and I have my own iMac. We have separate itunes accounts, with home sharing enabled. I have only one Airport Express and it is synced with my iMac. My question is: Can I sync that same Airport Express with my wife's macbo

  • I have 2 iPads and want to change the user I'd on one of them so they are not the same

    How do you get a new Apple ID for one of two ipads