Is there a way to edit the same RAW file in Aperture 3 and then Photoshop CS5?

I recently got Aperture 3.4.5 and its been great for stream-lining my workflow.  But for certain RAW adjustments, like applying a gradient, I want to use Photoshop CS5's RAW editing window.  I don't seem to be able to export the file as a modified CR2 from Aperture to Photoshop CS5.  Is there a way to do this?
And if exporting a modified CR2 from aperture is not possible, what advice can you give me for applying gradients in aperture, or in combinations with photoshop.  Is there a way to open a JPEG or TIFF in the raw editing window by any chance?
Any and all advice welcome.  Cheers!
-Mike

Is there a way to open a JPEG or TIFF in the raw editing window by any chance?
If you open Bridge and go into the Camera Raw Preferences, you will see a section at the bottom where you can set preferences for TIFF handling. Setting the option to 'Automatically open all supported TIFFs' will result in any TIFF file sent from Aperture to Photoshop via 'Edit with Photoshop CS5' function being launched in ACR and allow you to work on the TIFF file.
You then have to open the image in Photoshop with the 'Open' button in ACR and save the file (making sure you have the TIFF file extension set when saving). I haven't used this in a while, but I think it may try to save as a '.tif' file which would not be seen by Aperture when you complete the save (and have a '.tif' file sitting in the Masters folder that has no connection).
This is still not the RAW file - obviously - but will allow you to use the ACR tools on the TIFF file generated by Aperture and return it with those edits if saved correctly in PS CS5.
Message was edited by: CorkyO2 for grammatical errors.

Similar Messages

  • Is there a way to develop the same raw file multiple times, each time keeping the final product?

    I've been working with my NEF raw files.  When I import one into LR I can start developing it right away, which I've done.  I also know that the modifications aren't made to the raw file but kept in an XMP file.  Since the I'm not actually changing the raw file do you know if there is a way to make a secondary edit of the file?
    Here's an example.  Let's say I have a raw file and I want to develop it in color.  Then when I'm all done I want to start over and develop it again and black and white but keep the color one as well.
    I know I can undo all the edits I've made but then I lose all that work too.
    Is there a way to develop an image twice and keep both final products?  I know copying the raw file and renaming it is one crude way but I have to believe there's a better, easier way.

    Yes, you can make a virtual copy at any time.
    If you want the virtual copy to be un-edited after you have done some editing to the "non-virtual copy", you could open the "non-virtual copy" in the Develop Module, click on Reset, create the virtual copy, then undo the Reset operation (click on the last real edit in the History Panel)

  • In Logic 9, is there any way of editing the take folders of, say, 7 different drum tracks at the same time, so that each track has the same changes applied to its takes?

    In Logic 9, is there any way of editing the take folders of, say, 7 different drum tracks at the same time, so that each track has the same changes applied to its takes?

    scottiewade wrote:
    Thanks. I know how to select multiple tracks in the mixer, did that and put on group clutch,
    Hi
    Wrong..
    To assign tracks to a group, click in the dark gray box just above the automation (Read/Write/Off etc) on a channel strip, and select the group number you wish to use. The first tim eyou assign a group, the Group Setting swindow will appear automatically, thereafter you need to click on the group area and choose 'Open Group Settings'.
    Make sure that you have turned off Group Clutch (this disables all Groups)
    Maybe this will help
    http://support.apple.com/kb/VI248
    CCT

  • HT204380 Is there a way of using the same FaceTime account on multiple devices?

    Is there a way of using the same FaceTime account on multiple devices?

    Yes you can use the same Apple ID on multiple devices and FaceTime with each one. You have to associate a different email address on all but one of the devices.
    Lets say you have two iPads and two iPods..... All sharing the same Apple ID. When you set up FaceTime on three of the devices, you have to associate another mail address in Settings>FaceTime>You can be reached for Video calls at>Add Another email address. Add a different email address in that setting and let Apple verify the address.
    After that email address has been verified by Apple (they send you an email to that address so look for it in the inboxes of that email account and follow the instructions in the email), then remove the Apple ID email address on each of those three devices. You can use the primary Apple ID email on the fourth device.
    Obviously, you have to have additional email addresses but you can set up free email accounts with AOL, Yahoo, gmail .... and you can use the email address just for FaceTime if you like.

  • Is there a way to put the same event on multiple icloud calendars?

    Is there a way to put the same calendar entry on multiple calendars?  I have five children and most of them use their iTouch to keep there calendar.   My calendar is on icloud and I'd love it if they could see only their events but I need to see all of them.   Many of the events affect more than one child.

    As follow up to the above question,  I am the person putting items on the calendars.  I am not just trying to see calendars that they are maintaining. 

  • Is there a way to have the same music and playlists on 2 separate iPhones

    Is there a way to have the same music and playlists on 2 separate iPhones

    Yes. Create a New User Account on the Computer for the second iPhone.
    See Here  >  How to Use Multiple iDevices with One Computer
    More Info here...
    https://discussions.apple.com/message/18409815?ac_cid=ha

  • Does anyone know how the cutout filter works and is there a way of achieving the same effect without using filters to get more control over final look?

    does anyone know how the cutout filter works and is there a way of achieving the same effect without using filters to get more control over final look?

    Several ways to get similar results.  Image > Adjustments > Posturize with low values similar to what you'd use n Cutout.  This is the most flexible way I can think of as you keep the image in RGB mode with layers intact.  A more radical approach would be to reduce bit depth using Indexed Colour.  You'll need to experiment with settings, try changing Forced to Primaries, and Matte to Foreground Color.  There's no going back from this route, although you can change the mode back to RGB to re-enable layers, adjustment layers etc.
    A nice thing about the Filter gallery filters is that you can change the layer to a Smart object with all the control that gives you.
    Now if only this forum could filter out bizarre content.

  • HT4314 I have two children each with an itouch.  Is there a way of using the same AppleID but giving them separate game centre "me" users?

    I have two children each with an itouch.  Is there a way of using the same AppleID but giving them separate game centre "me" users?

    See:
    Multiple game center accounts for...: Apple Support Communities

  • Is there a way to edit the context menus in Firefox?

    Is there any way to edit the context menus in Firefox outside of installing an extension, or does anyone know of an extension that does so that is updated regularly? There is one called Menu Editor, but it doesn't look like it's being updated any time soon so I wouldn't imagine it will be compatible with 4.0 any time soon. I just want to edit the order of something to convince me to switch back to Firefox.
    == This happened ==
    Every time Firefox opened

    No, the submit button text is not customizable.

  • Is there any way to edit the standard Firefox context menu for displayed Web pages?

    Is there any way to edit the standard Firefox context menu for displayed Web pages? I frequently want to save a picture appearing on a page. Sometimes I "slip" and hit "Send Image" when I want "Save Image As", and have to sit and wait for a default send-mail page to come up, then close it, fiddling with its "are you sure" dialogs. This is a painful way to handle a slip-up. I basically NEVER want to e-mail an element directly from a page. Is there any way I can just delete "Send Image" from the context menu?

    You can remove entries in the context menu with code in the userChrome.css file
    *http://kb.mozillazine.org/userChrome.css
    Some IDs are listed in this MozillaZine Knowledge Base article:
    *http://kb.mozillazine.org/Chrome_element_names_and_IDs
    To find the ID of others you will have to use the DOM Inspector.
    * https://support.mozilla.org/kb/DOM+Inspector
    * https://developer.mozilla.org/En/DOM_Inspector
    * https://developer.mozilla.org/en/Introduction_to_DOM_Inspector
    * DOM Inspector: https://addons.mozilla.org/firefox/addon/dom-inspector-6622/

  • Two or more users editing the same script file in cq5, is it possible?

    In cq5 is possible two or more users editing the same jsp file? There is a lock system preventing simultaneous editing of the same file?
    Thanks,
    Gabriel

    you really should use eclipse and maven to work with multiple developers. something like [1] will be helpful
    [1] http://www.cqblueprints.com/xwiki/bin/view/Blue+Prints/The+CQ+Project+Maven+Archetype

  • HT5177 How can two people edit the same FCPX file? One company, so both people/computers share the same license. Example: I work on revision A and my boss takes it and makes revision B and gives it back to me using two separate computers.

    How can two people edit the same FCPX file? One company, so both people/computers share the same license. Example: I work on revision A and my boss takes it and makes revision B and gives it back to me using two separate computers.

    Have the project, events and media on one drive which is common to both macs.
    You can download FCP X to both macs using the same Apple ID that it was purchased with.
    Andy

  • Help! Is ther a way to make the pentool in Illustrator will be like in Photoshop pentool?

    Help! Is ther a way to make the pentool in Illustrator will be like in Photoshop pentool?
    I'm a photoshop user but this days i need make some design using illustrator. because of its vector base features.. but the problem is.. i more handy using the pentool in photoshop.. its hard for me to adjust..
    Is ther a way to make like this
    [IMG]http://i50.photobucket.com/albums/f313/henyongisaiah/VectorTypes-01.jpg[/IMG]
    http://s50.photobucket.com/albums/f313/henyongisaiah/?action=view&current=VectorTypes-01.j pg
    when i Add a anchor point, without converting it?
    i like to be automatic just like in photoshop pentool.

    1. Path with straight segment selected.
    2. PenTool: click the segment to add the anchorPoint. If the straight segment has no handles extended, the added anchorPoint will be a corner point. The added anchorPoint is selected.
    3. Click the Convert To Smooth button in the Control Panel. The anchorPoint is converted to Smooth and its handles are auto-extended.
    OR
    3. Press Alt to invoke the convert tool. ClickDrag the just-added AnchorPoint to drag out both its handles to the length desired. If SmartGuides is on, the handles will snap to the segment.
    If a segment is straight and has no extended handles, clicking the segment with the Pen tool adds a corner AnchorPoint with no handles extended.
    If a segment is straight and has either of its handles extended, clicking the segment with the Pen tool adds a Smooth AnchorPoint with both handles extended.
    JET

  • Is there any constrain in using the same order type for MTS and MTO

    Hi,
    i have the constrain to use single production order type .
    Can i use single order type for MTO and MTS.
    is there any constrain in using the same order type for MTS and MTO.
    pls help me.

    Hi,
    There is no constraint or limitation in using the same production order type for MTS and MTO . Settings in requirement class and material master will mainly control whether the flow is MTS or MTO.
    Regards,
    Mrinal

  • Is there any way to off the limitation of file upload?

    Hi
    jdev 11.1.1.5
    Is ther any way to off the limitation of file upload size?
    I want to handle in in my code

    Duplicate of {thread:id=2541076}
    Timo

Maybe you are looking for