Is there a way to find out my Apple Care serial?

Firstly, I'm new here so if this is in the wrong section then I apologise now
I recieved my MacBook Pro 13" in September '10 for my 18th Birthday off my Dad. My Dad says he remembers buying Apple Care for my MacBook but because I was an Apple N00b back then I didnt realise that I had to register it online with the code from the box, and my Dad is not sure where the Apple Care box is or if he even has it anymore!! Is there anyway to check if he did buy Apple Care without having to turn the house upside down and find the receipt? And if so is there anyway to locate that serial?
I have logged onto both my Apple account and my Dad's and neither of us of have the Mac registered.
If I went into an Apple Store with my Mac would they be able to tell me?
Any help or advice on this would be great, so thanks in advance!
Kieran.

Another option: Apple Customer Relations 1-800-767-2775

Similar Messages

HT5787 What do I do if my iPod was stolen and I checked my support profile and when I entered the serial # I got a message saying it has been registered to another Apple ID? Is there a way to find out that Apple ID so that we can locate the iPod?

What should I do if my iPod has been stolen and when I checked my support profile and entered my serial # and I received a message that the serial # had been registered to another Apple ID account? Is there a way to find out the Apple ID that it was registered to? I have already checked find my iPod and it shows my iPod is offline. I have already filed a police report.

No, sorry, there is no way you can get that information. The police perhaps could, but it would probably require a court order and it's unlikely the police will go to those lengths unless they have reason to believe that this theft was not an isolated instance and hence worth more of their time than the single theft of an iPod.
Even if they got the ID, it may well just be yours. Apple's registration database often contains such errors; I get the same message for some of my devices when I know I registered them to my Apple ID and the devices are all still right here.
Regards.

Is there a way of finding out what has been accessed on my MacBook Pro whilst in the possession of an apple authorised service centre?

Hi Guys,
I'm a bit new to this discussion group thing although I've been using Macintosh computers for many years (showing my age).
I handed my MacBook Pro to be repaired at an authorised apple service centre. When I handed it in they said they needed to keep hold of it to run some diagnostics and requested my password. I've owned various models of mac for the the past 17 years and this is the first hardware problem I have encountered, hence I have never bothered to set up user accounts.
As I live in quite a remote part of Sweden I am paranoid that some untrusted technician is going to make a copy of my music (11,000 tracks) or share some of my personal information (scanned copies of my birth certificate, passport, certificates, photos, etc.) on the web. Is there a way of finding out what activity has taken place whilst they've had it in their possession?
I appreciate any advice you guys can offer.
Thanks!
PS: I've already thought about the 'recently opened' menu and The machine in question is a MacBook Pro 17" (2011) running OS X 10.6.8 (need Rosetta).

I am paranoid that some untrusted technician is going to make a copy of my music (11,000 tracks) or share some of my personal information (scanned copies of my birth certificate, passport, certificates, photos, etc.) on the web.
If you put your info into the computer and hand it to another, you have to assume they will copy everything.
Why are you putting scanned copies of valuable identity information into a computer than can be hacked, stolen, lost or compromised by a dirty tech?
Have you lost your mind?
Is there a way of finding out what activity has taken place whilst they've had it in their possession?
No. The tech would just deny it if he did, or tell the truth which the answer would be "NO" in either case.
The employer won't ask that sort of questions without solid proof, less they make a enemy of the employee and/or risk being sued for defamation of character.
It's not like they bother to have a team of people watching over his shoulder that he doesn't stick a USB thumb drive of your data into his pocket to take home.
I am paranoid that some untrusted technician is going to make a copy of my music (11,000 tracks)
If it's iTunes music, it has your personal ID embedded into the song files. Most IT techs know this though.
I appreciate any advice you guys can offer.
Too late now, all you can do is not worry about it.
Take your personal info out of the machine and if you need it, burn cd/dvd copies, a few USB thumb drives, Iron Keys or self encrypting external storage drives with key and/or keypad.

Is there a way of finding out what lists in sharepoint are being looked up for document templates etc

Hi,
I am currently in the middle of setting up SharePoint sites and have come across many lists that have not been updated for a while. I am wondering is there a way of finding out what lists are being used and what lists aren't being used for example I would
like to find out if a list is being used for a look up.
Josh
J Burns

I don't think there any such option available OOTB, however you can use PowerShell to get such information e.g.
$web = Get-SPWeb http://localhost
$f = $web.Lists["Contact"].Fields["Customer"]
$f.ListsFieldUsedIn()
$web.Dispose()
Check this link: http://sharepoint.stackexchange.com/questions/45574/is-a-list-being-used-as-a-lookup-for-some-web-part-in-the-site-collection
Mark ANSWER if this reply resolves your query, If helpful then VOTE HELPFUL
INSQLSERVER.COM
Mohammad Nizamuddin

Is there a way of finding out how many active hours you've worked on a Premiere project?

If not, it'd be a very cool addition for Adobe to implement... so you know exactly how many hours a project is taking (and how much to charge clients etc.) Obviously we're all prone to leaving Premiere on and wandering away, so I guess it would need to be able to differentiate between active and non-active time...

Is there a way of finding out how many active hours you've worked on a Premiere project?
There are two things a client get's billed for, my time, and my computer's time. If either one of us are working on a project, the client get's billed. Even if Adobe spent (wasted?) time on adding such a feature, they'd never be able to include any time I've spent working on the project with PP closed, so this feature would have very, very, VERY limited usefulness.
The method suggested by the images is still the best way.

Is there a way to find out details about, who approved the RMA on system using front end or back end?

Is there a way to find out details about, who approved the RMA on system using front end or back end?

But is there a way (simple or not-so-simple) to find
out EVERY SINGLE FILE that's referenced on a
timeline? (I have lots of stuff imported into the
project that I know isn't used on any timeline, but
I'm afraid of moving or deleting things for fear of
never finding it again.)
I'd love to get some sort of "printout" (a list or
something) of every single file.
There is, go to browser and cntrl click on any one of the columns,
and select - show/source. A new column named "source" will pop up and will show where everything "lives". Click on the header at the top and it will justify the column as well. You'll notice this won't show anything for your seq.'s. of course, but will show stills/audio/motion files...
Once you have the new column, you can drag it next to the "name" column and get a grab of it and print it if you like, or whatever.
If you want to do this for just 1 seq., then can create a new bin and double click it to open it. Cntrl-A (select all) in your main seq. and just drag all into the new bin. You will see only what's in that seq. with the "source" column right next to it.
From what I've read, you seem to get the MM thing and it's obviously what you'll need to do to archive as the guys said. But what your missing is a file path system to where everything resides.
Hope this helps and that I've read you properly,
Peace
P-Book 1.5, 17" 2gsRAM Mac OS X (10.4.4) FCStudio

HT4972 2nd generation ipod touch is pretty much no good anymore? It is not able to upgrade to iOS5.1 and so will not work with many of the Apps now available in the App store. Is there any way to find out which apps will work with 2nd generat

2nd generation ipod touch is pretty much no good anymore? It is not able to upgrade to iOS5.1 and so will not work with many Apps in the iTunes store? Is there a way to find out if the App will work before you download?

Look to the app developer to provide that information when browsing the iTunes Store.
The iPod Touch still works, so what's your problem with it? It still works with older apps, it still does what it's intended to do.
If you aren't happy then sell it and buy a new one.

Is there a way to find out, whether the student or the full version is currently installed?

Hi everyone!
First of all: Merry Christmas!
A longer text with some background information is following. My question will be at the bottom.
My computer is a good boy and it didn't disappoint me for quite a while now.
I had once installed the student version (german) of CS3 extended on this one.
Then, after having removed the student version some time later when needed, I have re-installed the full version.
This time, however, it was in english and it wasn't the extended version either.
After the software has accepted my serial id, I was quite content. It felt much better in english and I was able to use photoshop to the fullest once again.
Today, I have gotten my hands on the upgrade version to CS5 (again in english and not extended, but that's all I need).
After the installation guide has told me, that there are no programmes installed which are compatible to the upgrade, I was confused.
I have realised that my current CS3 version was still the extended one, even though it was in english and it wasn't the student version either (at least, that's what I believe, because there were no "activate"/"deactivate" buttons in the help menu where it used to be in the german student version before).
So while doing an upgrade to CS5, I had to chose CS3 extended from the list and had to type in the old student's version serial number.
Nothing else worked, even though I've tried to chose the CS3 version in combination with the other serial number, which belong to the full version both.
Now to my question:
Is there a way to find out, whether the student or the full version is currently installed?
(Other than looking at the box of course, that would be quite trivial. I am worried if the installation guide hasn't removed all components thoroughly.)
Thanks in advance,
Happy holidays,
Jeff

Thanks for the reply!
That's what I thought as well. However, that wasn't the case. Whether it's the educational or the full version, both splash screens looked the same.
At least for the CS3 version.I know how I was quite confused about that in the past when I'd realised that.
The CS5 splash screen didn't say anything about a student version, but I was able to deactivate the application. I thought this was possible for the student version only.
I've tried using the adobe clean program like suggested, but that didn't work either. The installation guide of CS5 still didn't bother asking for an older version.
I.e.: It still used the educational serial number from before.
After reinstalling windows on my pc, the installation guide finally wanted to know about my CS3 again.
However, it told me, that the serial number of the full version in combination with CS3 is not valid. Just like it did before.
Maybe it's because the full version was made in the USA and the CS5 upgrade version was made in Austria - Ireland?
That would be really frustrating.

Is there a way to find out where iMessages are being sent from? I've received messages from an unknown email that are offensive and considered to be harassment.

Is there a way to find out where iMessages are coming from? I've contacted security personnel at my school and I'm brig harassed. I just want it to stop.

'''Here is an update to my former response.'''
Here is a safe way to look at an email which you think is suspicious:
* right click on the message and select 'Save As'
* the file name will be the email subject followed by an extension of .eml
* store it in a folder you can find easily, such as your Documents
* using your file explorer, right click on the file name and open it with Notepad or a similar text editor (NOT Thunderbird!)
* even though the format is not easy to read, you should be able to see who sent it to you, and also read the message text.
Since you are looking at the message in a text editor, there is no chance a link can activate something bad. I have used this method many times, and have found several spoofs of email names of my friends.

OIM11g: Is there a way to find out what method is used to create user

Hello,
I have a user pre-create event handler that gets called every time a user is created in OIM. In here, is there any way to find out if the user is created by self-service request, admin, or by an external client that used UserManager API? How can the Orchestration parameter be used to get this information?
Thanks

Once you have closed the file, the history in the palette is gone.

HT5244 Is there any way to find out after(!) running die Update, if i have been infected?

Is there any way to find out after(!) running die Update, if i have been infected?

Run any one of these tools: http://reviews.cnet.com/8301-13727_7-57413811-263/flashback-malware-removal-tool -roundup/
Or you can check manually: http://reviews.cnet.com/8301-13727_7-57410096-263/how-to-remove-the-flashback-ma lware-from-os-x/

Is there any way to find out where a standard text is used?

Is there any way to find out where a standard text is used?
We can see the text from SO10, but i want to find out where it is used.

HI
juct check out this thread
How to find Standard Text
a similar query is answered here
hope this helps
regards
Aakash Banga

Is there a way to find out how much data was used over the lifetime of my phone (cumulative cellular and wifi)?

Is there a way to find out how much data was used over the lifetime of my phone (cumulative cellular and wifi)?
I was just curious

Given that the phone doesn't track how much data is used over WiFi, no. And cellular data usage can be reset.

Is there a way to find out how much storage I have used on my iphone4s?

I am new to icloud and want to back up my phone but it is saying I have too much data to back up to the free 5.0GB. I can purchase more but note sure how much I will need. Is there a way to find out how much storage my phone is currently using?

Go to Settings - General - Usage, and you will see a breakdown of all your apps along with how much space they are using.
My guess is that you have a lot of pictures that should probably be exported to your PC/Mac to free up your space. 5GB is a lot for one phone, you should be able to get by without buying more storage if you do a little housecleaning first.

Is there any way to find out what brush is applied to a path?

I'm trying to write a script: select some paths, run the script, then each path that has a brush applied to it is changed to use a random brush whose name is sufficiently similar to its current brush. The application is pretty obvious - draw a bunch of lines in, say, 'ragged marker 1', then give it some extra liveliness by having five or six 'ragged marker' brushes that get randomly chosen.
The problem I'm running against is that as far as I can tell, Illustrator only lets Javascript set what brush an object is using with brush.applyTo (artItem), but I can't seem to find any way to find out what path a brush is currently using via JS.
Am I just not looking in the right place of the Javascript reference, or is this really a thing that only has a setter, with no corresponding getter?

Just like you said earlier
3. Re: Is there any way to find out what brush is applied to a path?
imagecollection Apr 7, 2015 6:01 PM (in response to Silly-V)
The skill of scripting in Illustrator is to (due to necessity) find the most difficult way to achieve the simplest of tasks...
so to retort I say this;
“I suppose it is tempting, if the only tool you have is a hammer, to treat everything as if it were a nail.”
― Abraham Maslow, Toward a Psychology of Being

Is there a way to find out my Apple Care serial?

Similar Messages

Maybe you are looking for