Is there a way to find out where iMessages are being sent from? I've received messages from an unknown email that are offensive and considered to be harassment.

Is there a way to find out where iMessages are coming from? I've contacted security personnel at my school and I'm brig harassed. I just want it to stop.

'''Here is an update to my former response.'''
Here is a safe way to look at an email which you think is suspicious:
* right click on the message and select 'Save As'
* the file name will be the email subject followed by an extension of .eml
* store it in a folder you can find easily, such as your Documents
* using your file explorer, right click on the file name and open it with Notepad or a similar text editor (NOT Thunderbird!)
* even though the format is not easy to read, you should be able to see who sent it to you, and also read the message text.
Since you are looking at the message in a text editor, there is no chance a link can activate something bad. I have used this method many times, and have found several spoofs of email names of my friends.

Similar Messages

  • Is there any way to find out where a standard text is used?

    Is there any way to find out where a standard text is used?
    We can see the text from SO10, but i want to find out where it is used.

    HI
    juct check out this thread
    How to find Standard Text
    a similar query is answered here
    hope this helps
    regards
    Aakash Banga

  • It's There a way to find out where my new phone is?

    I ordered new phone, is there any way to track where it is? It shouldn't be here for another few days but just  wanted to see what state it is in. Thanks if anyone knows or doesn't.

    You should have a confirmation email or text when the phone ships and should have a tracking number within.

  • Is there a way of finding out where my iPod was last synchronized?

    Hi,
    Basically i lost my ipod touch and i was wondering whether or not it was possible to track down the last device it had been synchronized to with the h

    If you mean as a wayof finding out if someone found the iPOd and then connect to internet/their computer the answer is no.  If they backed up to your computer you can go to the Summary pane for the iPod in iTunes and look at the date of the backup if yu backup up to iCloud.  If you back up to the computer you might have to go to iTunes>Prefeenceds>Devices to see the backup date.
    Apple will not help with anything regarding a lost or stolen iPod.

  • Is there any way to find out "Where am I" after a Field has been clicked?

    My question refers to the "Mouse Up" JS which are so frequently associated with a Field.
    I tried this code:
    console.println(this.rect);
    and the output was: "undefined".
    I then tried this:
    console.println(this);
    and the output was: [object Doc]
    so, I guess I am making progress, but I am too high on the object hierachy.
    What I need is the rect or the name, or some way to determine which of the many fields with identical code has been clicked.
    That kind of generalization (same code in many fields) sure saves a lot of time and coding.
    TIA,
    -Ramon

    As noted you can use the 'event' object's 'rect' property to get the quads, corner' points of the field that you clicked on. You can also access other event properites in the same way like 'event.target.name', 'event.targetName', or 'event.type' for example. Using the 'join()' method can provide a clearer listing of the quads for for the event, console.println(event.target.rect.join(", "));'

  • Any way to find out where the tablespace being used during a timeframe

    Hi All,
    I have a very generic question:
    We have a daily report for tablespaces info in our production env. In has 30.97% free space in a tablespace on 6/27/2009. On 6/28/2009 it reported only has 1.53% free. I would like to know which segments all the space went during this time period. I looked in the dba_extents but could not see any time related info which tells me when the extents be allocated. Can anybody share this info with me?
    Thanks a lot for your help in advance!
    Shirley

    What version of Oracle? What edition? Are you licensed to use AWR functionality?
    If you are on 10.1 or later, use the enterprise edition, and are licensed to use AWR (which generally requires the Diagnostics & Tuning pack), you should be able to query DBA_HIST_SEG_STAT (the SPACE_ALLOCATED_TOTAL and DELTA columns as well as the SPACEUSED_TOTAL and _DELTA columns).
    Justin
    Edited by: Justin Cave on Jun 29, 2009 12:36 PM

  • Is there a way to find out which PLD is tied to which BP code

    Hi, is there a way to find out which PLD is tied to which BP code?
    Maybe in the DB table that stores the PLD?
    Thanks.

    Hi Joyce,
    Try this query
    Select
                    T1.Name [Document],
                    T2.DocName [Layout],
                    Case
                                    When  T0.CardCode in (Select CardCode from OCRD)
                                    Then T0.CardCode
                                    Else ''/* will be blank when not assign to a specific BP*/
                                    End [Business Partner],
                    Case
                                    When USERID in (Select Internal_K from OUSR)
                                    Then (Select U_Name FROM OUSR Where Internal_K = T0.UserId)
                                    Else ''/* Will be blank when not assign to a specific user*/
                                    End [User]
               from
                    RDFL T0
                    inner Join
                    RTYP T1 on
                    DoumntDode = Code
                    inner join
                    RDOC T2 on
                    T2.DocCode = T0.DfltReport
    Regards,
    Bala
    Edited by: Balakumar Viswanathan on May 4, 2011 8:27 AM

  • My iPhone 4 is chewing through power and data, is there any way to find out if an app is causing this?

    My iPhone 4 is chewing through power and data, is there any way to find out if an app is causing this?

    call them, tell them you NEED a new battery installed, and they need to tell you when they can do it.  That is their job to help you! Give pushback if necessary.

  • Any way to find out where most of the memory is being taken up?

    I've got a G4 Tower with the latest 10.5 OS. I have an 80 GB drive, with 19 GB remaining.
    Single clicking on Mac HD, then "apple i" shows me this.
    Is there any way to find out more specifically where most of the memory is being taken up?
    Say, what folders are the biggest in size, and where they are? I'd like to delete any unwanted crap if i could...
    Thanks.

    Photecs wrote:
    I've got a G4 Tower with the latest 10.5 OS. I have an 80 GB drive, with 19 GB remaining.
    Single clicking on Mac HD, then "apple i" shows me this.
    Is there any way to find out more specifically where most of the memory is being taken up?
    It's not memory, it's disk space which is a different thing.
    you can figure out what's taking all the space using 3rd party tools like [Whatsize|http://whatsize.en.softonic.com/mac], [Omindisksweeper|http://www.omnigroup.com/applications/omnidisksweeper>, [Disk Inventory X|http://www.derlien.com> or [Grandperspective|http://sourceforge.net/projects/grandperspectiv>. there is also a terminal method described on [this page|http://homepage.mac.com/francines/articles/TigerMisc.html].
    Say, what folders are the biggest in size, and where they are? I'd like to delete any unwanted crap if i could...
    Thanks.

  • Is there a way to find out details about, who approved the RMA on system using front end or back end?

    Is there a way to find out details about, who approved the RMA on system using front end or back end?

    But is there a way (simple or not-so-simple) to find
    out EVERY SINGLE FILE that's referenced on a
    timeline? (I have lots of stuff imported into the
    project that I know isn't used on any timeline, but
    I'm afraid of moving or deleting things for fear of
    never finding it again.)
    I'd love to get some sort of "printout" (a list or
    something) of every single file.
    There is, go to browser and cntrl click on any one of the columns,
    and select - show/source. A new column named "source" will pop up and will show where everything "lives". Click on the header at the top and it will justify the column as well. You'll notice this won't show anything for your seq.'s. of course, but will show stills/audio/motion files...
    Once you have the new column, you can drag it next to the "name" column and get a grab of it and print it if you like, or whatever.
    If you want to do this for just 1 seq., then can create a new bin and double click it to open it. Cntrl-A (select all) in your main seq. and just drag all into the new bin. You will see only what's in that seq. with the "source" column right next to it.
    From what I've read, you seem to get the MM thing and it's obviously what you'll need to do to archive as the guys said. But what your missing is a file path system to where everything resides.
    Hope this helps and that I've read you properly,
    Peace
    P-Book 1.5, 17" 2gsRAM   Mac OS X (10.4.4)   FCStudio

  • Is there a way to find out, whether the student or the full version is currently installed?

    Hi everyone!
    First of all: Merry Christmas!
    A longer text with some background information is following. My question will be at the bottom.
    My computer is a good boy and it didn't disappoint me for quite a while now.
    I had once installed the student version (german) of CS3 extended on this one.
    Then, after having removed the student version some time later when needed, I have re-installed the full version.
    This time, however, it was in english and it wasn't the extended version either.
    After the software has accepted my serial id, I was quite content. It felt much better in english and I was able to use photoshop to the fullest once again.
    Today, I have gotten my hands on the upgrade version to CS5 (again in english and not extended, but that's all I need).
    After the installation guide has told me, that there are no programmes installed which are compatible to the upgrade, I was confused.
    I have realised that my current CS3 version was still the extended one, even though it was in english and it wasn't the student version either (at least, that's what I believe, because there were no "activate"/"deactivate" buttons in the help menu where it used to be in the german student version before).
    So while doing an upgrade to CS5, I had to chose CS3 extended from the list and had to type in the old student's version serial number.
    Nothing else worked, even though I've tried to chose the CS3 version in combination with the other serial number, which belong to the full version both.
    Now to my question:
    Is there a way to find out, whether the student or the full version is currently installed?
    (Other than looking at the box of course, that would be quite trivial. I am worried if the installation guide hasn't removed all components thoroughly.)
    Thanks in advance,
    Happy holidays,
    Jeff

    Thanks for the reply!
    That's what I thought as well. However, that wasn't the case. Whether it's the educational or the full version, both splash screens looked the same.
    At least for the CS3 version.I know how I was quite confused about that in the past when I'd realised that.
    The CS5 splash screen didn't say anything about a student version, but I was able to deactivate the application. I thought this was possible for the student version only.
    I've tried using the adobe clean program like suggested, but that didn't work either. The installation guide of CS5 still didn't bother asking for an older version.
    I.e.: It still used the educational serial number from before.
    After reinstalling windows on my pc, the installation guide finally wanted to know about my CS3 again.
    However, it told me, that the serial number of the full version in combination with CS3 is not valid. Just like it did before.
    Maybe it's because the full version was made in the USA and the CS5 upgrade version was made in Austria - Ireland?
    That would be really frustrating.

  • TS2446 Is there a way to find out what your security question answer is?

    Is there a way to find out what your security question answer is?

    Amazing,  I can't find out what app on my phone just ran 388mb of data xfer at 2:44am yesterday while I'm sound asleep yet the LE types can subpoena and search warrant anything I do online and with who and for how long.  Verizon list who I receive phone calls from and make calls to and from where I receive messages and to whom/where I text but can't tell me squat about something that is eating up band width.  I'm sure it's probably some app that is running in the background on my phone. I've just got to figure out what it is and kill it.  I want to drop (cause I don't use it, it's slower than a dial up 1200bps modem)my data plans and save about $50 a month.

  • Is there a way to find out which project using the record Z_student by sql

    Is there a way to find out which project using the record Z_student by sql
    use Find in in Application Designer is time consumer

    Try following SQL
    with all credits to the original poster of the greater portion of this sql
    http://srini-peoplesoft.blogspot.co.uk/2012/05/find-in-text-sql.html
    select projectname  from psprojectitem
    where (objectvalue1,objectvalue2,objectvalue3) in
    With Srch As
    Select Str, SubStr(Max(HexStr),3) Srch_Str
    From
    Select RNum, Str, Hexcode, Sys_connect_by_path(HexCode, '00') HexStr
    From (
    Select RNum, Str, Chr(Floor(Mod(Code/16, 16))
               + Decode(Floor(Floor(Mod(Code/16, 16))/10), 0, 48, 55)) ||
           Chr(Mod(Code, 16)
               + Decode(Floor(Mod(Code, 16)/10), 0, 48, 55)) HexCode
    From (        
    Select RNum, Str, Ascii(Substr(Str, RNum, 1)) Code
      From (Select Rownum RNum From Dual Connect By Level <= Length(:Str)),
           (Select :Str Str From Dual
            Union
            Select Upper(:Str) From Dual
            Union
            Select Lower(:Str) From Dual
            Union
            Select InitCap(:Str) From Dual
    Start With RNum = 1 Connect By Prior RNum = RNum - 1 And Prior Str = Str
    Group By Str
    select
    objectvalue1,objectvalue2,objectvalue3
    from pspcmprog p, srch
    where dbms_lob.instr(progtxt, srch_str)  > 0
    );

  • N97... is there a way to find out if it's network ...

    I know, not the best idea to buy these products on ebay, but I'm afraid I've done it and now looking for any advice anybody can give!
    First of all the seller told me it was unlocked and had his location down as Ireland, which is where I'm based.  I therefore presumed it had been checked on Irish networks.
    However when the phone arrived it had come from Poland and was made in China.
    When I insert my sim and switch it on it just says "insert sim".  I'm wondering if this is because it's locked or a fault in the phone.  The seller insists he had tried it and it was unlocked.  Of course, I now realise he would have tried it in Poland, not a whole lot of use to me.
    Is there a way of finding out which network it is locked to?  Or even if the phone is a genuine nokia product.
    Any advice appreciated!  

    If the games come up in Chinese script then I'm SURE you have bought a Fake. I bought a Fake phone on ebay from a seller in Ireland about a year ago.
    I didnt bother with paypal to start, I sent him an email :-
    "I have recieved the phone and suspected it was a fake copy. I have taken it to my local Nokia Store and a branch of Phones4you. Both shops confirmed it is a fake, they went to the trouble of comparing to the real thing in the shop.
    I have done my research:
    My local Trading Standards Office
    address
    telephone
    website
    email
    Your local Trading Standards Office
    address
    telephone
    website
    email
    I am sorry if you too have been conned but I will pursue you through Trading Standards, the Police & Paypal.
    Please send me money back within 2 days or I will contact all 3 agencies without delay. Give me a refund and that will be the end of it"
    That worked, I got my money back, He did ask me to return the phone, I sent it to trading standards.
    George
    De Criminalised 0570817: RM-505_EMEA_EURO_QW1 Black on Vodafone

  • Is there any way to find out wn was a table deleted apart from using audit

    Is there any way to find out wn was a table deleted apart from using audit
    Oracle version 9.2.0.7

    SQL> SHOW USER
    USER is "SCOTT"
    SQL> CREATE TABLE test_delete AS SELECT * FROM emp;
    Table created.
    SQL> DELETE FROM test_delete;
    14 rows deleted.
    SQL> COMMIT;
    Commit complete.
    SQL> conn sys@orclsb as sysdba
    Enter password: ******
    Connected.
    SQL> ALTER SESSION SET nls_date_format='DD-MON-RRRR HH24:MI:SS';
    Session altered.
    SQL> BEGIN
      2     DBMS_LOGMNR.START_LOGMNR (
      3           starttime => '02-FEB-2011 17:51:00',
      4           endtime   => '02-FEB-2011 17:54:00',
      5           options   => dbms_logmnr.DICT_FROM_ONLINE_CATALOG+
      6                        dbms_logmnr.continuous_mine +
      7                        dbms_logmnr.no_sql_delimiter +
      8                        dbms_logmnr.print_pretty_sql
      9                                  );
    10  END;
    11  /
    PL/SQL procedure successfully completed.
    SQL> set line 10000
    SQL> SELECT scn ,timestamp
      2         ,commit_timestamp, username
      3  FROM v$logmnr_contents
      4  WHERE
      5   username = 'SCOTT'
      6  AND  TABLE_NAME='TEST_DELETE';
           SCN TIMESTAMP            COMMIT_TIMESTAMP     USERNAME
       2309736 02-FEB-2011 17:53:20                      SCOTT
       2309739 02-FEB-2011 17:53:20                      SCOTT
       2309769 02-FEB-2011 17:53:59                      SCOTT
       2309774 02-FEB-2011 17:53:59                      SCOTT
       2309774 02-FEB-2011 17:53:59                      SCOTT
       2309774 02-FEB-2011 17:53:59                      SCOTT
       2309774 02-FEB-2011 17:53:59                      SCOTT
       2309774 02-FEB-2011 17:53:59                      SCOTT
       2309774 02-FEB-2011 17:53:59                      SCOTT
       2309774 02-FEB-2011 17:53:59                      SCOTT
       2309774 02-FEB-2011 17:53:59                      SCOTT
           SCN TIMESTAMP            COMMIT_TIMESTAMP     USERNAME
       2309774 02-FEB-2011 17:53:59                      SCOTT
       2309774 02-FEB-2011 17:53:59                      SCOTT
       2309774 02-FEB-2011 17:53:59                      SCOTT
       2309774 02-FEB-2011 17:53:59                      SCOTT
       2309774 02-FEB-2011 17:53:59                      SCOTT
       2309774 02-FEB-2011 17:53:59                      SCOTT
    17 rows selected.
    SQL>

Maybe you are looking for