Is there a way to force color management ON in Flash Player 10

Here's my problem:
I have a wide gamut display (calibrated and profiled) and
with a wide gamut display, it is very important to have web
browsing (and ideally everything else) fully color managed, because
unmanaged colors get displayed horribly wrong.
Firefox 3 supports full end-to-end color management (when
switched on). It even wisely assumes sRGB for CSS color values and
untagged images. But of course, Firefox 3 can't control Flash
rendering and this makes it impossible to view web pages that
contain Flash with correct (or even near-correct) colors.
So is there a way to force Flash Player 10's color management
ON by default? I know it is probably not a good idea in many cases,
but in my case, it would work a lot better than having if off by
default.
I'm using Mac OS X 10.5.5.

The website may alter its page display based on the browser ID that is transmitted to the site from your browser. Some browsers on the iPad like iCab allow you change the browser ID to something desktop-oriented. Safari does not provide this capability.

Similar Messages

  • Color Management in Adobe Flash Player

    Is there any way to enable color management in Adobe Flash Player? I want to see color-managed-video on some sites that use Flash Player (like YouTube). I've looking for the solution anywhere, but happened not to found one. Any help would be appreciated.

    It looks like this is driven by the content and might be browser dependent - http://www.adobe.com/devnet/flash/quickstart/color_correction_as3.html
    However, I'd try disabling hardware acceleration to see if that makes a difference.  I wouldn't be surprised if using the GPU altered the way this works.
    How do I disable or enable hardware acceleration?

  • Is there any way to repair (re-install) the internal flash player for IE10?

    Hi eveyone,
    In short;
    been running Win 8 Pro 64-bit for a couple of days now. Decided it was time to try out some software so installed  a trial of Fix It Utilities Professional (bad decision).
    Installed it, played around for a bit and after a while I came up with the brilliant idea of running a registry clean/fix (insert facepalm) and some overall clean-up, just curious
    to seel the results.
    Being stupid and feeling lazy, cleaned everything and didn't create a backup. Everything seemed fine afterwards. Only the internal flash player for IE 10 dissapeared
    from the Add-ons list, hence the plugin itself stopped working.I've tried everything I think I've tried all the help options I could find on the Adobe site, but nothing seems to work (un-install tool,
    delete files and folders, IE's security settings back to default, checked ActiveX status and permissons, reset all data and settings for IE10 etc) Something must have been modified in the registry
    but I'm just unable to locate the problem. I also installed the latest beta for Chrome and that's working like a charm, no problems at all and the performance is great.
    So this is the error I receive:
    I'm kinda stuck now; the installer won't let me installl it because IE has a built in plugin, but it's not working in IE. It's not even visible in the add-on menu.
    I know it was a pretty stupid thing to do, but I still hope someone here knows what to do. I;m kinda running out of ideas/options (not going to edit the registry myself, because you can
    bet your money this will only have a negative outcome
    thanks in advance!
    edit
    the last thing I can think of is that OpenOffice and Windows Live Messenger also use flash, if i'm correct. E.g. in the OpenOffice folder there is a flash.dll file. Could these files be of real
    influence?
    ill copy all the current flash files and keys/values, seems the only way to clear thing ups a bit

    No, you can ask questions, but you'll have to wait until someone shows up who knows the answer.
    I do not have Windows 8 / IE10, so I don't know anything about it.
    You may have to wait until US daytime; maybe someone from the Adobe staff knows the answer.  But you may be better off asking in a IE10 forum.
    Meanwhile check if you can find any relevant information in http://wwwimages.adobe.com/www.adobe.com/content/dam/Adobe/en/devnet/flashplayer/pdfs/flas h_player_windows8_admin_guide.pdf

  • Is there a way to increase the video buffer for Flash Player 9?

    Does anyone know if it's possible to increase the buffer
    capacity for Flash Player 9? I'm living out in the boondocks for a
    while and am jonesing for Comedy Central videos. I just subscribed
    to a DSL provider in a rural setting but it's a little too far from
    the hub and the data transfer rate is slow. The Flash Player
    application appears to only buffer a minute of video. Currently I
    click the pause button while a selected video is playing and then
    wait for the data to buffer. Unfortunately, the data transfer is
    stopped after a minutes worth of video is loaded. Any
    suggestions?

    There's no way to do it on the client side. That can only be
    controlled by the developer of the content..

  • I am having problems with certain websites that require adobe flash player because of the restrictions that apple has put in place. Is there a way to get to sites that require flash player?

    I am having problems with certain websits that require adobe flash player

    Please don't start the 1 millionth thread on this subject, which has been answered over and over and over and over and over and over and over.........Use the search bar and type flash and you'll see thousands of posts on this.

  • Is there a way to force a new session so my "on new session" code will run?

    I'm using apex.oracle.com and I find values of application (global) and page items persisting across logins.
    I didn't expect that? I thought they would go away when I logged out of APEX. But I can change the values, logout, and log back in to the same values. And when I login and start an application, it's not running my "shared components > application processes" initialization code which is set "on new session".
    I thought each login would be a distinct new session with it's distinct set of items. (see definition below)
    So when I run an application, is there a way to force a new session so my "on new session" code will run?
    >
    What Is a Session?
    A session is a logical construct that establishes persistence (or stateful behavior) across page views. Each session is assigned a unique identifier. The Application Express engine uses this identifier (or session ID) to store and retrieve an application's working set of data (or session state) before and after each page view.
    Because sessions are entirely independent of one another, any number of sessions can exist in the database at the same time. Also, because sessions persist in the database until purged by an administrator, a user can return to an old session and continue running an application long after first launching it. A user can also run multiple instances of an application simultaneously in different browser sessions.
    Sessions are logically and physically distinct from Oracle database sessions used to service page requests. A user runs an application in a single Oracle Application Express session from log in to log out with a typical duration measured in minutes or hours. Each page requested during that session results in the Application Express engine creating or reusing an Oracle database session to access database resources. Often these database sessions last just a fraction of a second.
    >
    Thanks -- Howard

    I cleaned up the copy of the Select List code in APEX 4.1.xxx which was not operating correctly before. Now it matches what I have in APEX 4.2.yyyy. And, drum roll please, the select list seemingly works fine there (4.1) as well. But now, the initialization code--which was working fine(!)--FAILS in 4.1!
    <font size="3"><font color="red">•<font face="courier new">
    Okay. Maybe this will help. 1) I logged in. Ran the login page but did not login. Opened the "session" window and wrote down the session ID. Logged out and back in. 2) Ran the login page but did not login. Opened the "session" window and .... it has the same session ID? 3) <b>So the session is persisting across logins!! How is that possible?</b>
    (More) When I log into 3 different applications, I get a different session ID for each but repeated logins always give the same session ID for any given session. </font>

  • Is there a way to force rotobrush in CS5.5 AfterEffects to a specific contour that the automatic edg

    Is there a way to force rotobrush in CS5.5 AfterEffects to a specific contour that the automatic edge finder will not recognise? Such as a light color car moving in front of a light color building.*

    > Now Adobe, listen up.
    You can submit feature requests (and bug reports) here: http://www.adobe.com/go/wish
    More on feedback for After Effects: http://adobe.ly/93d6NF

  • Is there a way to force a program closed on a Mac Pro?

    Is there a way to force a program to close like you can using the Task Manager in Windows?
    I have Motion 5 that seems to lock up showing the spinning wheel like it thinks like it is doing something in the background.  Unfortunately, It happens when I haven't tried to do anything.  It seems to go on for ever.  The only way I've been able to get out of it if to reboot the computer but I lose all my work in doing so.

    Apple menu > Force Quit...

  • Is there any way to force time machine to keep retrying after disk i/o error?

    a little background to my problem:
    i've had a hard drive problem previously, and i managed get all the data off of my mac by trying and retrying to access the same files and also from my working time machine backup. after zeroing out and reformatting my drive and doing a clean install of Mavericks i had everything back up running no problems.
    recently, my macbook pro would be stuck and slow in recently imported iphoto pics so i figured my hard drive is really failing this time around
    i try to get a time machine backup to save what i can, but after a couple of tries time machine would just stop backing up and in console i would see a disk i/o error.
    is there any way to force time machine to keep trying to backup through the disk i/o error so i can save what i can before getting a new drive?
    edit: a little more info, i know i have a harddrive error from looking at the console, but when i do a verify disk in disk utility it comes up clean and even after doing a disk repair it comes up clean i still see disk i/o errors in the console.

    See:
    *http://kb.mozillazine.org/Preferences_not_saved
    Thee can also be a problem with the file(s) that store the extensions registry.
    Delete the files extensions.* (extensions.sqlite, extensions.rdf, extensions.cache, extensions.ini) and compatibility.ini in the Firefox [[Profiles|profile folder]] to reset the extensions registry.<br />
    New files will be created when required.
    See "Corrupt extension files":
    * http://kb.mozillazine.org/Unable_to_install_themes_or_extensions
    If you see disabled, not compatible, extensions in "Tools > Add-ons > Extensions" then click the Tools button at the left side of the Search Bar (or click the "Find Updates" button in older Firefox versions) to do a compatibility check or see if there is an update.

  • Is there any way to force iPhoto to present faces by folder for identification rather than randomly?  Would provide better context for identification especially if a huge number of images is involved.

    Before I commit the time and energy required to load and tag faces in 25,000 images within iPhoto, I need some questions answered;
    Is there any way to force iPhoto to present faces by folder for tagging rather than randomly?  When so many images need tagging, over many years, the context of a folder helps with the identification. The work around is to load the images into iPhoto one folder at a time and do the tagging then.
    How do I get iPhoto to present the tagged faces by last name rather than first name? When so many faces will be identified, it is much easier to find people by surname, particularly when I share the library within the family. The work around is to enter names as last name and first name.  Being able to toggle the sort is much more desireable.
    Is there a way to export a portion of the library including faces?  I want to pass on portions of this huge 125 GB library to my family members.
    Since my family members will need an Apple computer to view the images and faces, they will likely have their own photo library.  So is there any way to combine two libraries and merge the faces?
    About 2/3 of my images have been scanned, so the date of creation is the scanned date rather than the date the photo was taken.  Will this mess up any sequencing or the retrieval of faces?

    If I want to carve off part of a library, I presume the way to do this is to make a copy of the library using PLM then go into iPhoto and delete what I don't want.  The result is the carved off portion.
    You don't need Library Manager to delete the portion you don't want.
    As a general rule: when deleting photos do them in batches of about 100 at a time. iPhoto can baulk at trashing large numbers at one go.
    If I want to merge two libraries, PLM implies that it will do this but will the Faces be merged too?
    I believe so.

  • Is there any way to force Firefox to remember passwords?

    As many have complained about, there is a growing trend for websites to prevent browsers, including Firefox, from remembering passwords. This is absolutely infuriating. Like most people, I have on the order of 100 passwords, and thanks to idiotic, overzealous IT guys who need to justify their own jobs, we are forced to constantly change them to ludicrous, impossible-to-remember combinations of symbols and numbers. (Does anybody really get their accounts stolen because some hacker sits down and tries to guess their password? Somehow I find that very, very hard to believe.)
    First world problems, I know. My question though is simple: is there any way to force Firefox to remember passwords? Perhaps an add-on or external program of some kind? I know there are password manager programs, but the last time I checked, those were all but worthless and didn't work as well as the built-in Firefox support for remembering passwords. Thanks for any help.

    hello andrew, yes you can either [https://addons.mozilla.org/firefox/addon/remember-passwords/ install an addon] or [https://www.squarefree.com/bookmarklets/forms.html#remember_password use a bookmarklet] to circumvent this restriction.
    in an upcoming version of firefox, this functionality will also be built-in directly into the browser: http://www.ghacks.net/2013/12/24/firefox-29-save-fill-autocompleteoff-passwords/

  • Is there a way I can view/manage devices linked to my iCloud account?

    Is there a way I can view/manage devices linked to my iCloud account? I know how to view the devices linked to my iTunes account, but I am not sure if this is possible to see with an iCloud account.

    You can't, except by seeing if they are using services associated with the account.  You could, for example, launch Find My iPhone on iCloud.com to see what devices appear (which obviously wouldn't show devices not using Find My iPhone).  Similarly, you could go to Settings>iCloud>Storage & Backup>Manage Storage to see what devices appear on the Backups list (which won't show devices not using iCloud backup).

  • Is there a way to force "desktop view" on my iPad 1 when using Safari?

    Google, in their control frenzy, has now changed iGoogle to default to Tablet view on iPads. Why??? Here is one solution but it does not use Safari:
    Question:
    Is there a secret to getting the old igoogle homepage back, or is it gone for good on the iPad 2?  I still have the homepage on my Mac, so the problem is just with the iPad.  Any help anybody can give to get the home page back would be greatly appreciated.
    Answer:This issue is with the Tablet view. You can switch to Classic view at the bottom, but as soon as you type anything in the url bar you get reverted to Tablet. I have the Atomic Browser installed on my iPad and have set it to identify itself as a desktop. iGoogle loads fine on that. I am not aware of any such setting for Safari on the iPad.
    Google fails to understand that we do not need sub featured pages for our tablets. Tablets work fine with the desktop versions. They have probably concluded that iGoogle pages are too busy for tablets and so have disabled it. Tablet search has been significantly degraded by Goggle with elimination of the pinch and zoom and cached features. It should be possible to make a sticky setting change to Classic view on tablets. Most other settings stick, but not the Classic view. I dont think Google get it anymore.
    Is there a way to force Safari ,on an iPad, to do this?

    The website may alter its page display based on the browser ID that is transmitted to the site from your browser. Some browsers on the iPad like iCab allow you change the browser ID to something desktop-oriented. Safari does not provide this capability.

  • Is there a way to "force" an EFI update?

    Hi all
    I have the Macbook 5,1 with 4GB of RAM. I read [over at OWC|http://blog.macsales.com/9102-secret-firmware-lets-late-08-macbooks-use-8gb ] that this computer supports 8GB provided it has the "updated" version of the MB51.007D.B03 Boot ROM. I would be interested in installing 8GB to extend the life of the computer. It runs really well and is a gem.
    As I understand OWC's text, Apple re-wrote the MB51.007D.B03 to allow addressing memory up to 8GB *but didn't change the version number*. My computer has MB51.007D.B03 but I don't know when this Boot ROM was installed because I bought the computer used in 2010.
    When I try to install the EFI update which OWC links to the computer simply says that it is installed and that it cannot be applied.
    As I live in Europe, it's a bit of a gamble for me to order the OWC RAM upgrade pack without knowing if it will actually work on my Macbook.
    So here are my questions:
    Would the message I get mean that I have the "updated" version of MB51.007D.B03 or would such a message come up also if I have the "old" version of MB51.007D.B03 installed (for instance, would the computer verify some sort of file checksum that differs between the two versions of MB51.007D.B03)?
    Is there a way to "force" install of the MB51.007D.B03 which is on Apple's site (which presumably is the latest version) to ensure that I have the latest version installed so that I can safely order the OWC upgrade pack?
    Thanks for any insight,
    /p

    Both ports having different IP's on the same network is not a recommended configuration. If you're trying to increase network bandwidth instead of multi-home, then the proper way to do it is to port-channel. Your switch will need to support bonded interfaces too.
    If you must do it the way you have it set, then you can insert a static route so certain specific destinations are routed through that card. The correct way to do it is with two route statements. Assuming your IP assignments as above, your destination is 192.168.4.15, and you always want to go through the .10 interface, you would add:
    route add -host 192.168.4.15 10.1.4.10
    I haven't tested this so I might have the syntax slightly wrong. The first approach (bonding the two ports) is a much better solution.

  • Is there a way to force applications to use window opening (and closing) animations?

    I'm not a big fan of the fact that most of the time, when windows open, they don't display any sort of animation, and pretty much nothing has a closing animation.
    Is there any way to force all apps to use some sort of animations, and also, is there a way to enable window closing animations?
    It just kind of bothers me, probably because of that fact that I just abandoned Windows 8 for OS X.

    Hack using spell checker's smart quote feature:
    If the document doesn't use double quotes...
    Edit > Find/Change:
    Change all ( to "
    Change all ) to "
    Those are straight quotes.
    Edit > Spell Check:
    On all instances with "string", click [Correct]
    On all instances with "string, type in (string) and click [Correct].
    Edit > Find/Change:
    Change all \` to (
    Change all \' to )
    Those are left and right double curly quotes.
    Yes, you have to hit each instance, but it will be click-to-continue except on mismatch.

Maybe you are looking for

  • Infopath takes forever to open DESIGN

    Hello, I had an infopath which was 540KB and I add 3 more views to it which bumped it up to 767KB. Now, after i saved and closed the form and reopen it, it takes about 10 mins for the design to open. Any suggestions why this happens? I have 16 views

  • Electronic payments thru House Bank

    Dear Experts, Pl advise solution for the below problem. In case of vendors common to say New york and Houston , separate house banks can not be maintained in vendor master. Thus, everytime house bank needs to be changed by New york and Houston accoun

  • Isolate 2 companies on one server

    Hi All I want to isolate 2 companies on one server. Please advice if that is possible in SBO. I have tried using system landscape directory but could not found the solution.It creates database user but where does it ask during installation or login?

  • ISE Post Setup IP Address Change (is it possible?)

    I've run across an odd problem.  I have a fresh test ISE (on VMware) installation up and running in my lab.  After a few days I realized I needed to alter the IP address of the test ISE.  I've been through the admin guides and forum posts, but there

  • IMac G5 screen goes black and fan gets loud...?

    This has never happened before... Randomly tonight while on my iMac the screen shut off. The computer was still running, but my screen was completely black like it was off, and the fan got really loud. I turned it off then back on each time it happen