Is there a way to insert a clickable hyperlink in the long text of an order
Is there a way to insert a clickable hyperlink in the long text of an order header instead of using the attachment option?
Thank
JAM
Edited by: Jimmy Mendoza on Dec 6, 2010 8:48 PM
hi jimmy,
You can very well add hyper links in the long text ,the long text should be in word format,suppose you want to use www.google.com you can type this and when click on it,it will take you to the website.
Regarding objects sap has not given this facility to add an attachment,for this you can use DMS functionality.
Similar Messages
-
Is there a way to insert a string even if the value has a single quote in it?
Hi,
I have a varchar string like
Name: D'souza
I am getting an error when i am inserting like this.
insert into table (D'souza)
Is there any way to allow inserting the exact value even if it has single quotes attached to it like set define off in oracle ?
Regards
Gautam S
Gautam Sinsert into table values('D''souza')
insert into table values('D'''+'souza')
Try also this one
SET QUOTED_IDENTIFIER { ON | OFF }
http://msdn.microsoft.com/en-us/library/ms174393.aspx -
I can do this in Word, but not Pages. I'm using Pages '09 Version 4.1. Any help would be appreciated.
Thank-you!You can also click at the end of a section and insert a new section from the Sections link on the toolbar.
Basic rule is if you are clicked in the text, then the new section will go after the current section.
If you are not clicked in the text then the new section will be at the end of the document.
A section obviously does not fit inside an existing section.
Peter -
Is there any way to insert a pop up calender and tick boxes into pages on the ipad? And if not if I do it on a mac will the document work on pages on the ipad? I'm trying to set up a document with quick check boxes to tick and a date to choose rather than type? I know it possible to do it on pages on a mac but i haven't been able to find anything on the ipad to create such a thing, and I don't know if it will work on the ipad if I create it on the mac
RGA,
Unfortunately, I do not believe that it is possible for a DAQ board to generate an AI Start Trigger from an analog trigger, but not be triggered itself until it receives a digital trigger.
Spencer S. -
Is there a way to insert a file (such as a PDF or Word doc) into a presentation?
I have a few pdf "highlight sheets" that I'd like learners to be able to access and print out if they'd like, while watching the presentation.
Is there a way to insert a file into the course? (For instance, if they click a certain button, the file would be downloaded to their computer?)
Thanks,
InnaWhile Michael's answer is technically correct, I never advise to use the browse button to locate the file. Doing so puts the link in peril as it typically creates an absolute path leading to the document you wish to link to. So use the button if you must, but before committing the link, ensure you remove any pathing information and leave behind only the document file name.
Cheers... Rick -
Is there a way to insert comments into numbers on an ipad, or an alternative?
Is there a way to insert comments into numbers on an ipad, or an alternative?
If you mean in the iBooks app - tap on Collections in the upper left corner. Then tap New. Name the collection. Tap Done. Then tap the Edit button in the upper right. Tap on the books that you want to move to select them. Tap Move in the upper let corner. Select the newly created collection.
-
Is there a way to insert a reminder in a long list?
Is it really possible that there is no way to insert a new reminder in the Reminders app, only append to the end of the list?
TThanks, but I meant creating new entries. In a long list it is only possible to add at the bottom rather than inserting...
-
Is there a way to insert a Ai graphic into msWord and the graphic text still be searchable in msWord? I would like the text in my Ai graphic to be searchable once the graphic is inserted in msWord. I have tried different Ai exports, but all come into msWord as pictures. Is there a way to keep the Text Layer in my Ai file searchable in msWord.
Which version of Illustrator are you using?
Which version of Word are you using?
What OS?
Do you have a recent version of Acrobat? -
Is there any way to insert a sharp into excel through OLE?
Dear Expert,
Is there any way to insert a sharp into excel through OLE ?If have , Would you please give a sample code?
BR EdwardHi,
Check this link..[OLE2, Excel, WinWord |http://translate.google.com/translate?hl=en&sl=ru&u=http://www.sapnet.ru/] you can find the code snippets. -
Is there a way of inserting symbols into JTextPane?
Hi there folks. Is there a way of inserting symbols like greek letters in a standard way into JTextPane?
use getDocument(). insertString(offs,str, attributes);
str should contain proper unicode chars and attributes must contain proper font family to show the chars.
use StyleConstants.setFontFamily()
regards,
Stas -
Is there a way to insert/update .js files in an .oam after publishing?
I'm working on a rather complex Animate project that utilizes Edge Commons and jQuery UI. I'm using Edge Animate CC 2014 because 2014.1 broke some of that functionality and I was already too far into the project to update the code.
When I'm testing the project via "Preview in Browser" everything works great. But when I publish as either a .oam file or as web, the project is just broken. The interactive elements that depended upon Edge Commons are gone.
I've narrowed the issue down to the three files "index_edge.js", "index_edgeActions.js", and "index_edgePreload.js". If I copy the working files from the Animate project directory and replace the published versions, the web export works. I'm assuming Edge Animate is compressing the code in these files and that is breaking something. However, I need a .oam file so that it can be utilized by the next person in the chain. Is there a way to replace those three files with the 'working' versions within the .oam file?Hi ,
Open your edgeProject/index_edgeActions.js.Replace the following with single line comment. Open in edge animate 2014 and publish again. Published content will work
/*================================================================================
change Q number to match breakers || Q should = breakers +1 to account for 0 value if no BK0 exists
| |
| |
| | DOUBLE CHECK BECAUSE OF BK0
| |
| |
| |
__| |__
================================================================================*/
Like this.
//================================================================================
//change Q number to match breakers || Q should = breakers +1 to account for 0 value if no BK0 exists
// | |
// | |
// | | DOUBLE CHECK BECAUSE OF BK0
// | |
// | |
// | |
// __| |__
//================================================================================ -
Is there a way to insert comments directly into an Illustrator document so that every time you expor
I use Illustrator a lot to create website designs, and pepper the PDFs with comments on how everything should work. Is there a way to have those comments embedded into the AI so that I don't have to enter in the comments every time I export a PDF?
Template are the pre-designed document in which you do the modification as per the need.
this will give you better idea..
http://help.adobe.com/en_US/illustrator/cs/using/WS714a382cdf7d304e7e07d0100196cbc5f-6330a .html
So , you can create a template with the comment on it.
when creating the new file , base it upon the template so that you have the comment already present in the Ai. -
Best way to insert millions of records into the table
Hi,
Performance point of view, I am looking for the suggestion to choose best way to insert millions of records into the table.
Also guide me How to implement in easier way to make better performance.
Thanks,
Orahar.Orahar wrote:
Its Distributed data. No. of clients and N no. of Transaction data fetching from the database based on the different conditions and insert into another transaction table which is like batch process.Sounds contradictory.
If the source data is already in the database, it is centralised.
In that case you ideally do not want the overhead of shipping that data to a client, the client processing it, and the client shipping the results back to the database to be stored (inserted).
It is must faster and more scalable for the client to instruct the database (via a stored proc or package) what to do, and that code (running on the database) to process the data.
For a stored proc, the same principle applies. It is faster for it to instruct the SQL engine what to do (via an INSERT..SELECT statement), then pulling the data from the SQL engine using a cursor fetch loop, and then pushing that data again to the SQL engine using an insert statement.
An INSERT..SELECT can also be done as a direct path insert. This introduces some limitations, but is faster than a normal insert.
If the data processing is too complex for an INSERT..SELECT, then pulling the data into PL/SQL, processing it there, and pushing it back into the database is the next best option. This should be done using bulk processing though in order to optimise the data transfer process between the PL/SQL and SQL engines.
Other performance considerations are the constraints on the insert table, the triggers, the indexes and so on. Make sure that data integrity is guaranteed (e.g. via PKs and FKs), and optimal (e.g. FKs should be indexes on the referenced table). Using triggers - well, that may not be the best approach (like for exampling using a trigger to assign a sequence value when it can be faster done in the insert SQL itself). Personally, I avoid using triggers - I rather have that code residing in a PL/SQL API for manipulating data in that table.
The type of table also plays a role. Make sure that the decision about the table structure, hashed, indexed, partitioned, etc, is the optimal one for the data structure that is to reside in that table. -
RE: Is there a way to have 2 network cards on the samemachine
Sean,
I mean I am always connecting to the nodemgr of the 2nd environment
successfully. Only when I run the client part of the application that I know
is up, I get a response from the Name Server that it is actually the first
IP address.
I checked again. I defenitely have FORTE_NS_ADDRESS set to IP:5004, in my
case, and not the hostname. I don't have FORTE_LOCATIONS set any where. the
NS_ADDRESS for env2 has only 1 IP address associated with it. My Forte
Control Panel on the client, and hence the NS address has only one entry.
I tried going into escript like you said, and the name service still thinks
it is IP1.
Venkat Kodumudi
Price Waterhouse LLP
Internet: [email protected]
Internet2: [email protected]
-----Original Message-----
From: Sean Brown [SMTP:[email protected]]
Sent: Monday, June 22, 1998 1:31 PM
To: Venkat Kodumudi; 'Sean Brown'
Cc: [email protected]
Subject: RE: Is there a way to have 2 network cards on the same
machine
Hmmmm? That is a little odd! Let me rehash what I think you are saying.
You now have two environments each with their own name service with
FORTE_NS_ADDRESS set to a different IP:Port combination. For example you
are doing the steps:
FORTE_NS_ADDRESS=255.255.255.1:5000
start the nodemgr for env 1
FORTE_NS_ADDRESS=255.255.255.2:5000
start the nodemgr for env 2
Now when you start a client you are always getting the address for env 1
back from the nodemgr. I assume you actually mean the name service? Or, do
you mean you are always connecting to the nodemgr & name service for env
1?
If the first scenario is the case and you are connecting to the nodemgr
for
env 2 but getting back IP's for services listening on the card for env 1 I
would ask you what you are setting the FORTE_LOCATIONS value to before you
start each service. If you are not setting it or are using the host name
it
will register using the IP for the primary network card associated with
the
machine name and I am again assuming that this is env 1. You need to set
the FORTE_LOCATIONS variable to 255.255.255.2:0 (based on the steps above)
before starting your services.
If the second scenario is the case I would have you check what the
FORTE_NS_ADDRESS is set to before you start up the client. Once again it
must be the IP:Port combination not host:port combination if you want to
get
anything other than the primary card.
I would also suggest that you do the following. After everything is up
and
running execute the following commands:
escript -fns "ip for env1":port
findsub nameservice
showpart
What you should see is everything currently registered under the name
service. It will have the name and any "locations" (IP and port) that it
is
registered as listening on. I would look for the nodemgr and see where it
has advertised itself. I would then look for any services you expect to
be
registered there and also verify where the have advertised themselves. If
there are multiple locations listed for any one service, the client will
use
the first one in the list.
Do the same for env 2.
Sean
-----Original Message-----
From: Venkat Kodumudi [mailto:[email protected]]
Sent: Monday, June 22, 1998 9:57 AM
To: 'Sean Brown'
Cc: [email protected]
Subject: RE: Is there a way to have 2 network cards on the same machine
I am giving the actual IP address. and not the host name. That is why I
don't understand what is going on.
Venkat Kodumudi
Price Waterhouse LLP
Internet: [email protected]
Internet2: [email protected]
-----Original Message-----
From: Sean Brown [SMTP:[email protected]]
Sent: Monday, June 22, 1998 10:53 AM
To: Venkat Kodumudi; 'Sean Brown'
Cc: [email protected]
Subject: RE: Is there a way to have 2 network cards on the same
machine
Hello Venkat,
I probably should have mentioned this before. Your are correct. Forteis
doing a host lookup if you are providing a name for examplemachine1:5000.
You can bypass the host lookup by using the actual ip dot addressinstead
for example 255.255.255.255:5000. This way you are taking the name
service
out od the picture and Forte will use the address provided.
Sean
-----Original Message-----
From: Venkat Kodumudi [mailto:[email protected]]
Sent: Monday, June 22, 1998 9:27 AM
To: 'Sean Brown'
Cc: [email protected]
Subject: RE: Is there a way to have 2 network cards on the same machine
My requirement is that my second card serves as best case performance
testing piece. This eliminates the network completely. We went one step
ahead and created a new enviromnent for the second card. Whatever I do,
the
nodemgr is returning back the IP address of the first card, even thoughmy
FORTE_NS_ADDRESS does not have the first card in the picture any where.
I think Forte is doing a host look up and returning the first IP address
it
finds, as opposed to returning the IP address specified in theenvironment
variable FORTE_NS_ADDRESS. Is there a way to trick it?
Venkat Kodumudi
Price Waterhouse LLP
Internet: [email protected]
Internet2: [email protected]
-----Original Message-----
From: Sean Brown [SMTP:[email protected]]
Sent: Thursday, June 18, 1998 9:54 AM
To: Venkat Kodumudi
Cc: [email protected]
Subject: RE: Is there a way to have 2 network cards on the same
machine
OK, you ran into one of the issues. That is, if both addresses areknown
to
the client that is trying to contact the partition it will always usethe
first address in FORTE_LOCATIONS. This is because FORTE_LOCATIONS was
designed more as a failover mechanism. So it will always try the
first
address in the list and if it succeeds, there is no reason to move onto
the
second.
Now, the second issue is that there is currently a problem with theclient
failover to the secondary address in FORTE_LOCATIONS. If the firstentry
fails it is supposed to retry on the second entry. Instead, it
retries
the
first entry again. I know that Forte knows about this but I do nothave
a
bug number on it.
With that said, lets look at a possible solution for you. If the real
objective here is to have a back up network card available for fail
over
on
the same machine, or use one card to advertise outside your firewalland
one
to use inside, then you will have to contact Forte to determine whenthe
failover problem will be fixed. But, if the objective is to loadbalance
across the network cards you could have the environment manager listenon
both ports and then alternate your server partitions across both
cards.
For
example:
set FORTE_NS_ADDRESS=card1:5000;card2:5000 and then start up the
environment
manager
set FORTE_LOCATIONS=card1:0 (the 0 in the port causes the OS to pick a
port)
and start partition one
set FORTE_LOCATIONS=card2:0 and start partition two
and so on....
In this scenario the environment manager will be listening on bothcards
but
each server will be listening on only one of the two cards. So if a
request
comes in for partition1 it will go through card one and if it is for
partition two it will go through card two. You could assign your
partitions
to cards based on expected load.
Well, I am done. I hope this helps!
Sean
-----Original Message-----
From: Venkat Kodumudi [mailto:[email protected]]
Sent: Thursday, June 18, 1998 8:06 AM
To: 'Sean Brown'; 'John Jamison'
Cc: [email protected]; Jose Suriol
Subject: RE: Is there a way to have 2 network cards on the samemachine
Sean,
Thanks for your reply. I tried the approach. I was not very specificin
my
question. I do need the ability for server applications to listen and
server
on both the network cards.
I was succesfully able to make the nodemgr listen on both the cardsand
actually serve requests coming in from both the cards. But, followingyour
advise, I took a cautious step with FORTE_LOCATIONS. Here is what I
noticed.
I have an application that has 6 partitions in total. I used
FORTE_LOCATION
to make it listen on 1. Both the cards. 2. Swapped the IP addresses
for
both
cards for this application. 3. One card that I want it to listen on. I
tried
all approaches by exporting the locations variable for just this
application. The nodemgr recieves a request from this pc connected onthe
second card to talk to one of the partitions. The node mgr responds
with
a
proxy - with the ip address and socket number of the first card. The
FORTE_NS_ADDRESS variable looks like this:
IP1:5002;IP2:5002.
Is it possible atall to resolve my problem, without having a seperate
environment?
Thanks
Venkat Kodumudi
Price Waterhouse LLP
Internet: [email protected]
Internet2: [email protected]
-----Original Message-----
From: Sean Brown [SMTP:[email protected]]
Sent: Wednesday, June 17, 1998 10:42 AM
To: 'John Jamison'; Venkat Kodumudi
Cc: [email protected]
Subject: RE: Is there a way to have 2 network cards on the
same
machine
Venkat,
Actually, it is possible for Forte to listen on more than one IP andport
combination. The first reply to your message was correct. If you
set
the
FORTE_NS_ADDRESS to contain multiple entries before starting the
name
service, it will advertise on both. For Forte servers you use the
FORTE_LOCATIONS env variable to get it to advertise on multipleip:port
combinations.
We were doing something very similar with another customer I was at
to
get
around a firewall. I will warn you that there are some issues with
FORTE_LOCATIONS that may keep that portion from working. However,
from
reading your note, it appears that all you need is for the nameservice
to
advertise and listen on multiple ports and that works fine. I justtested
it again for sanity sake and it worked. I ran my test on NT using
Forte
3G2.
Sean
-----Original Message-----
From: [email protected]
[<a href="mailto:[email protected]">mailto:[email protected]]On</a> Behalf Of John Jamison
Sent: Tuesday, June 16, 1998 4:51 PM
To: Venkat Kodumudi
Cc: [email protected]
Subject: Re: Is there a way to have 2 network cards on the samemachine
Venkat,
Technically yes this is possible, though not in Forte. A nameserver
can
only listen on one port.
To implement this scheme you will have to write a proxy service (insome
language
including perhaps forte) which listens on the well-known port on the
second card, reads requests, then forwards them to the realnameservice
(wkp on the first card), and forwards replies back. This is not
trivial, but some firewall toolkit vendors supply stub code to write
application specific proxies.
-J
Venkat Kodumudi wrote:
Folks,
Here is what we would like to do:
We want to have 2 network cards on a unix box - which means I have
2
ip
addresses, and the connection between the two is the unix box and
only
the
unix box. I have a pc connected to the 2nd network card and I want
it
to
connect to the nameserver that is listening on a well known port
on
the
first network card. We don't want to turn IP forwarding between
the
two
cards. We want Forte to address both cards to talk to clients, in
one
environment.
Can this be done? If so how?
Thanks in advance.
Venkat Kodumudi
Price Waterhouse LLP
Internet: [email protected]
Internet2: [email protected]
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive<URL:<a href=
"http://pinehurst.sageit.com/listarchive/">http://pinehurst.sageit.com/listarchive/</a>>
>>>>
John Jamison [email protected]
Vice President and Chief Technology Officer
Sage IT Partners, Inc.
Voice: 415 392-7243 x 306
Fax: 415 391-3899
Internet Enabled Business Change
<a href=
"http://www.sageit.com">http://www.sageit.com</a>
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:<a href=
"http://pinehurst.sageit.com/listarchive/">http://pinehurst.sageit.com/listarchive/</a>>Hello Venkat,
I probably should have mentioned this before. Your are correct. Forte is
doing a host lookup if you are providing a name for example machine1:5000.
You can bypass the host lookup by using the actual ip dot address instead
for example 255.255.255.255:5000. This way you are taking the name service
out od the picture and Forte will use the address provided.
Sean
-----Original Message-----
From: Venkat Kodumudi [mailto:[email protected]]
Sent: Monday, June 22, 1998 9:27 AM
To: 'Sean Brown'
Cc: [email protected]
Subject: RE: Is there a way to have 2 network cards on the same machine
My requirement is that my second card serves as best case performance
testing piece. This eliminates the network completely. We went one step
ahead and created a new enviromnent for the second card. Whatever I do, the
nodemgr is returning back the IP address of the first card, even though my
FORTE_NS_ADDRESS does not have the first card in the picture any where.
I think Forte is doing a host look up and returning the first IP address it
finds, as opposed to returning the IP address specified in the environment
variable FORTE_NS_ADDRESS. Is there a way to trick it?
Venkat Kodumudi
Price Waterhouse LLP
Internet: [email protected]
Internet2: [email protected]
-----Original Message-----
From: Sean Brown [SMTP:[email protected]]
Sent: Thursday, June 18, 1998 9:54 AM
To: Venkat Kodumudi
Cc: [email protected]
Subject: RE: Is there a way to have 2 network cards on the same
machine
OK, you ran into one of the issues. That is, if both addresses are known
to
the client that is trying to contact the partition it will always use the
first address in FORTE_LOCATIONS. This is because FORTE_LOCATIONS was
designed more as a failover mechanism. So it will always try the first
address in the list and if it succeeds, there is no reason to move on to
the
second.
Now, the second issue is that there is currently a problem with the client
failover to the secondary address in FORTE_LOCATIONS. If the first entry
fails it is supposed to retry on the second entry. Instead, it retries
the
first entry again. I know that Forte knows about this but I do not have a
bug number on it.
With that said, lets look at a possible solution for you. If the real
objective here is to have a back up network card available for fail over
on
the same machine, or use one card to advertise outside your firewall and
one
to use inside, then you will have to contact Forte to determine when the
failover problem will be fixed. But, if the objective is to load balance
across the network cards you could have the environment manager listen on
both ports and then alternate your server partitions across both cards.
For
example:
set FORTE_NS_ADDRESS=card1:5000;card2:5000 and then start up the
environment
manager
set FORTE_LOCATIONS=card1:0 (the 0 in the port causes the OS to pick a
port)
and start partition one
set FORTE_LOCATIONS=card2:0 and start partition two
and so on....
In this scenario the environment manager will be listening on both cards
but
each server will be listening on only one of the two cards. So if a
request
comes in for partition1 it will go through card one and if it is for
partition two it will go through card two. You could assign your
partitions
to cards based on expected load.
Well, I am done. I hope this helps!
Sean
-----Original Message-----
From: Venkat Kodumudi [mailto:[email protected]]
Sent: Thursday, June 18, 1998 8:06 AM
To: 'Sean Brown'; 'John Jamison'
Cc: [email protected]; Jose Suriol
Subject: RE: Is there a way to have 2 network cards on the same machine
Sean,
Thanks for your reply. I tried the approach. I was not very specific in
my
question. I do need the ability for server applications to listen and
server
on both the network cards.
I was succesfully able to make the nodemgr listen on both the cards and
actually serve requests coming in from both the cards. But, following your
advise, I took a cautious step with FORTE_LOCATIONS. Here is what I
noticed.
I have an application that has 6 partitions in total. I used
FORTE_LOCATION
to make it listen on 1. Both the cards. 2. Swapped the IP addresses for
both
cards for this application. 3. One card that I want it to listen on. I
tried
all approaches by exporting the locations variable for just this
application. The nodemgr recieves a request from this pc connected on the
second card to talk to one of the partitions. The node mgr responds with a
proxy - with the ip address and socket number of the first card. The
FORTE_NS_ADDRESS variable looks like this:
IP1:5002;IP2:5002.
Is it possible atall to resolve my problem, without having a seperate
environment?
Thanks
Venkat Kodumudi
Price Waterhouse LLP
Internet: [email protected]
Internet2: [email protected]
-----Original Message-----
From: Sean Brown [SMTP:[email protected]]
Sent: Wednesday, June 17, 1998 10:42 AM
To: 'John Jamison'; Venkat Kodumudi
Cc: [email protected]
Subject: RE: Is there a way to have 2 network cards on the same
machine
Venkat,
Actually, it is possible for Forte to listen on more than one IP andport
combination. The first reply to your message was correct. If you setthe
FORTE_NS_ADDRESS to contain multiple entries before starting the name
service, it will advertise on both. For Forte servers you use the
FORTE_LOCATIONS env variable to get it to advertise on multiple ip:port
combinations.
We were doing something very similar with another customer I was at toget
around a firewall. I will warn you that there are some issues with
FORTE_LOCATIONS that may keep that portion from working. However, from
reading your note, it appears that all you need is for the name serviceto
advertise and listen on multiple ports and that works fine. I justtested
it again for sanity sake and it worked. I ran my test on NT using Forte
3G2.
Sean
-----Original Message-----
From: [email protected]
[<a href="mailto:[email protected]">mailto:[email protected]]On</a> Behalf Of John Jamison
Sent: Tuesday, June 16, 1998 4:51 PM
To: Venkat Kodumudi
Cc: [email protected]
Subject: Re: Is there a way to have 2 network cards on the same machine
Venkat,
Technically yes this is possible, though not in Forte. A name server
can
only listen on one port.
To implement this scheme you will have to write a proxy service (in some
language
including perhaps forte) which listens on the well-known port on the
second card, reads requests, then forwards them to the real nameservice
(wkp on the first card), and forwards replies back. This is not
trivial, but some firewall toolkit vendors supply stub code to write
application specific proxies.
-J
Venkat Kodumudi wrote:
Folks,
Here is what we would like to do:
We want to have 2 network cards on a unix box - which means I have 2ip
addresses, and the connection between the two is the unix box and onlythe
unix box. I have a pc connected to the 2nd network card and I want it
to
connect to the nameserver that is listening on a well known port onthe
first network card. We don't want to turn IP forwarding between thetwo
cards. We want Forte to address both cards to talk to clients, in one
environment.
Can this be done? If so how?
Thanks in advance.
Venkat Kodumudi
Price Waterhouse LLP
Internet: [email protected]
Internet2: [email protected]
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive<URL:<a href=
"http://pinehurst.sageit.com/listarchive/">http://pinehurst.sageit.com/listarchive/</a>>
>>
John Jamison [email protected]
Vice President and Chief Technology Officer
Sage IT Partners, Inc.
Voice: 415 392-7243 x 306
Fax: 415 391-3899
Internet Enabled Business Change
<a href="http://www.sageit.com">http://www.sageit.com</a>
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:<a href=
"http://pinehurst.sageit.com/listarchive/">http://pinehurst.sageit.com/listarchive/</a>> -
Is there a way of putting firefox bookmarks folder on the dock
Is there a way of putting firefox bookmarks folder on the dock. not just one bookmark. i have done that. but i want all of them in stack or something.. similar to how windows did it in the start menu. its annoying that you have to open firefox first to access your links.
i got my first imac yesterday and loving it!!! albeit the text is a bit small but i have found the zoom!
thanks in advancePerhaps you don't know how to bring icons into the Firefox Toolbar. You can put many things up there, including Bookmarks. You can also remove an icon or rearrange the order of icons.
From View>Toolbars>Customize
Here is the Bookmarks icon (next to the History icon) from which you can open all your bookmarks directly. And if you can remember a keyword, it will find that one, or any others that come up with that keyword. It's really quite convenient to use and will stay updated with any new bookmarks that are added.
This is showing the Bookmarks open, which can be closed by clickng on the small x.
Maybe you are looking for
-
Ok so every time I open iTunes and connect my iPod video it comes up with a error saying "The software required for communicating with the iPod is not installed correctly. Please reinstall iTunes to install the iPod's software." I used the guide abou
-
Got an error while import script run in command prompt in R12
hi ' i am running the below script in command prompt in R12, but it will give an error that error name: 'import' is not recognized as internal or external command, operable program or batch file. import C:\JDeveloper10g\jdevhome\jdev\myprojects\flsm\
-
WIA error in Photoshop Elements 9
Hi there, I just started using PSE 9 on my new laptop with Windows 8.1. I wanted to scan an item with 'import using WIA' in PSE 9 editor, using my scanner/printer (combi device: Canon MP540). It doesn't work. I can use PSE, that works fine. I tried t
-
How to show number of times as output?
i have a table books_issue_details. I would like to show as output books table: book_id,book_name,author_name,etc.. book_issue_details columns book_id,issue_id,student_id,issue_date output: title 1 has been issued o times title 2 has been issued 4 ti
-
How to output header info. by using DMEE?
Hi, When I am using DMEE to output payment file, I need to put a header info. before the itemlized transactions. For bank like Citibank, only need each transaction lines, so no header need to put. But some bank, need a header info. in front of the it