Is there a way to know from you iBooks apple id number how old it is?

is there a systsem that tells you how old you ibook is using your compurter id number?

Hi WOZ,
Well, there is a way that takes a little bit longer, but its almost full proof. The older Apple computers use what they Gestalt IDs, but newer ones don't. The newer computers like the iBook use Machine IDs, like PowerBook6,7 (iBook G4 Mid 2005). Now the way to find the Machine ID on your computer is to go to /Applications/Utlities/System Profiler and look under Hardware. You should see under Machine Model (for the iBook) PowerBook,. You can find more Machine IDs and Gestalt IDs at The Apple Museum.
I hope that helps,
Jon
PS I'd rather look them up this way instead of downloading software. TinkerTool is for getting access to more preferences, thats not really what you want.

Similar Messages

  • Is there a way to know if you have some type of virus on your iPad? My iPad wont let me open any app

    My iPad will not open any app or let me on the Internet. Could I have a virus?

    There is no virus that affects an iPad or iOS unless you are
    jailbroken - in that case you are on your own.
    Reset the iPad by holding the home button and the on/off button
    at the same time until the Apple logo appears and then let both
    go. No data will be affected.
    If that does not resolve the problem, connect the iPad to the
    computer you normally sync with and use iTunes on that computer
    to restore the iPad - first from backup and if necessary as a new
    iPad.

  • Is there a way to know from what site and/or  what link a site came from.

    I want to use the same site and code but depending on fronm what link the site was created I want to forward to sit A.jsp respectiveley site B.jsp.
    How can I check this.
    Thanks

    the normal way is to use the Referer header (that's the right spelling, even though it's not spelled right), but that's not guaranteed. If it's within your app, passing it is the safer bet.

  • Is there a way to know how many minutes left from ...

    Is there a way to know how many minutes left from your subscription from the Skype phone app??
    Thanks!

    Hi, Konfuzed,
    Thanks for your inquiry. The Skype Mobile apps look a bit different.  In order for the Skype Community to help you, some more information would be helpful:
    - Hardware you use (phone/tablet brand and model)
    - Its operating system (version and updates installed)
    - Skype version used
    Thanks in advance.
    - Skype Community Moderation Team
    Was your question answered? Please click on the Accept as a Solution link so everyone can quickly find what works! Like a post or want to say, "Thank You" - ?? Click on the Kudos button!
    Trustworthy information: Brian Krebs: 3 Basic Rules for Online Safety and Consumer Reports: Guide to Internet Security Online Safety Tip: Change your passwords often!

  • There any way to know where my ipad, because it was stolen? and do not use iCloud? besides not remember if you have installed any applications to track it?

    there any way to know where my ipad, because it was stolen? and do not use iCloud? besides not remember if you have installed any applications to track it?

    If you did not set up Find My iPad, then there is no way to track it. Contact the police and change any passwords for any online accounts you may have used from your iPad (the iTunes Store, for instance). 
    Regards.

  • Is there any way to know the T-code from the screen?

    Hi friemds,
    it s a general question. but I found relavant for posting here.
    I saw our group friens giving some T-codes for spro functions (eg: SNRO, M/06), bbut how to know the transaction from path. i.e. If I go to condition types screen, there I could not see any transaction. is there any way to know the T-code from the screen?

    Hi,
    Listed here are the various ways you can find the list of transaction codes and their usage:
    Use transaction SE11 - ABAP Dictionary:
    Fill in the Database table name and click the Display button.
    - TSTC   table will contain all the Tcodes and
    - TSTCT table will contain all the Tcodes with Texts.
    Once you entered the screen, click in Top Menu - Utilities - Table contents - Display
    If you want to display all the transaction code (total - 57,048) you have to change the Fields: Maximum number of hits to 99999 (default 500).
    or
    Simply goto transaction SM01, although this tcode is to Lock/Unlock any transaction code, you can also view all the tcode available in the R/3 system from here.
    or
    Goto transaction SE93
    There are two ways where you can find the list of transaction codes in SE93.
    Method 1:
    You must be familiar with the starting characters strings for each of the R/3 application modules.
    Assuming you know that most Materials Management transaction codes start with MM.
    In the Fields: Transaction code, type in MM* and press the function key F4
    The list of transaction code starting with MM will be displayed.
    Method 2:
    On the Top Menu, click Utilities - Find - Execute and the first 500 transaction will be display.
    If want to display all the tcodes, make sure you remembered to change the Fields: Maximum no. of hits right at the bottom of the screen.
    I know a particular T Code and can enter and work on it.  How do I know what is the menu path for that T Code?
    Enter Search_SAP_Menu in the command box and when the pop box appears enter, the Tcode and it will give the nodes and menu path. 
    This is helpful only in case of SAP Menu not in case of SPRO - ie IMG.....
    Reward if Helpful,
    Regards,
    Archit.

  • Lost my iphone dont know my IMEI number tried to get it from ituens about and clicking the Control key but there is one imei and i have 2 phones backed up on my ituens is there a way to know which one is the right one?

    Lost my iphone dont know my IMEI number tried to get it from itunesby clicking about and the Control key but there is one imei and i have 2 phones backed up on my itunes is there a way to know which one is the right one? and is there another way to find my phone and its offline so i cant use find my phone! Help

    Other ways? Check the box? Call your carrier?

  • Is there any way to recover photos you have deleted from iphoto trash?????

    Is there any way to recover photos you have deleted from iphoto trash;ie  emptied trash..

    Depends on the version of iPhoto - some details would help us help you
    If you have iPhoto '11 then the photos go from the iPhoto trash to the system trash and you can recover them there and import backinto iPhoto
    Otherwise you you are looking at data recovery software like file salvage http://subrosasoft.com/software/filesalvage or a data recovery service
    LN

  • Is there any way to know/capture my_work_station_PC_name from SAP/SE38?

    Hi Experts,
    Is there any way to know/capture my_work_station_PC_name from SAP/SE38?
    If so, pls. let me know it.
    thanq

    thanq
    I got the Computer name by using the FM POC_GET_COMPUTER_NAME.
    But, I did not get it by using ur suggested Method.
    But, I got the IP address, by using u suggested METHOD(but, am not llooking for it)
    So, pls. just curious that, if ur time permits, pls. let me know that, How to code/use the suggested METHOD of COMPUTER NAME in my SE38 z_prog. I mean, sample code, roghly.
    thanq

  • Is there any way to know data is read from tape and written to disk

    is there any way to know data is read from tape and written to disk

    784786 wrote:
    Just asked because I am doing restoration, I see files read from tape and then restored, but can't find them physically there.
    Is there any way I can find it.What kind of restoration? What kind of files?
    The usual "no information" question is of the form "My car won't start. Tell me how to fix it"
    Yours is a bit different - "I tried to fix my car. Tell me how to know it's fixed".

  • Is there any way to stream FROM my Apple TV TO my iPad?

    Is there any way to stream FROM my Apple TV TO my iPad? I know I can stream from the pad to the TV, but I haven't seen anything that lets me do it vice-versa. I want to stream while my computer is off/asleep. I don't want to keep my computer awake all the time simply to be prepared for the random moment when I want to watch a movie but I'm not in a position to go turn on my computer and turn on iTunes. If my Apple TV could stream the movies and music, that would suit my needs, but it looks like that feature isn't available. Does anyone know how to work around it using either Apple or 3rd-party software/hardware?

    You can use Apples Remote app to stream any macs iTunes library to ATV1 but only second gen ATV,s are capable of streaming direct from iOS devices.

  • Is there any way to know when an app is going to be discontinued?

    I purchased an app around eight months ago for $13. I forgot about it until I was reloading apps onto my new IPad. When I went to find it, it was no longer in the app store at all. I contacted the support people who told me that since it was "so long ago" there was no recourse.  So does that mean that any time you purchase an app it could disappear at any moment? Is there any way to know in advance that this will happen?  Never mind that it stinks to spend that amount of money and then have nothing to look back at.
    Additionally, I have had trouble reloading apps that I have paid for as an "in app purchase".  What is the deal with that?  Is that information not stored like buying an app outright?
    Thanks
    DTC

    Apple constantly reminds folks to backup their content. Apple warns folks all of the times that content may not always be available in the iTunes or Mac App Stores and most folks ignore the warnings or cannot be bothered to read them. No, unless the developer warns you that they are with drawing an app from one of the stores, there is no way to know in advance that an app may no longer be available.
    http://support.apple.com/kb/ht4009

  • Do I have to buy Lion or snow lepoard or is there a way to updated from OS X 10.4.11?? I have a new ipod that will not work without the ne itunes, but the new itunes will not install without a newer vesion of Max OS X. Help please :)

    Do I have to buy Lion or snow lepoard or is there a way to updated from OS X 10.4.11?? I have a new ipod that will not work without the ne itunes, but the new itunes will not install without a newer vesion of Max OS X. Help please

    Need to know your Mac model. If it's a PowerPC, the max OS is Leopard 10.5.x. If it's an Intel procesor, you can upgrade to Snow Leopard (for $29) & later to Lion.
    *Mac OS X 10.5 Leopard installation system requirements*
    http://support.apple.com/kb/TA24950
    Leopard is no longer available at the Apple Store *but may be available by calling Apple Phone Sales @ 1-800-MY-APPLE (1-800-692-7753)*.
    Installing Mac OS X 10.5 Leopard
    http://support.apple.com/kb/HT1544
    Mac OS X 10.5 Leopard Installation and Setup Guide
    http://manuals.info.apple.com/en/leopard_install-setup.pdf
    After you install the base 10.5, download & install the 10.5.8 combo update at http://support.apple.com/downloads/Mac_OS_X_10_5_8_Combo_Update
     Cheers, Tom

  • The best way to know if you a  data  in a table

    hello
    I have a doubt what 's the best way to know if you have a value in a table .For example I have a table called Vehicle , that have two rows id and name . Well I want to know before do somthing if the vehicle with mane '11111', exist or not .
    Nowadays i do this operation with a : select count ( id ) into num from vehicle;
    This is the best way ???
    THANKS

    Hello
    Well here's an alternative that may help in your situation. The idea is that you put all of your values that you will be testing for the existence of, in a collection. Then use INTERSECT to find out which of those are already present in the table.
    It may well turn out to be completely useless, but I'm trying to avoid working on what I am supposed to be working on, and I thought I'd try it out ;-)
    CREATE TABLE dt_test_vehicle(veh_name     VARCHAR2(20));
    INSERT INTO dt_test_vehicle values('1111');
    INSERT INTO dt_test_vehicle values('2222');
    INSERT INTO dt_test_vehicle values('4444');
    INSERT INTO dt_test_vehicle values('5555');
    INSERT INTO dt_test_vehicle values('6666');
    CREATE TYPE dt_tt_varchar2 IS TABLE OF VARCHAR2(20)
    set serveroutput on
    DECLARE
         ltt_Params     dt_tt_varchar2;
         ltt_Result     dt_tt_varchar2;
    BEGIN
         ltt_Params := dt_tt_varchar2();
         ltt_Params.EXTEND(4);
         ltt_Params(1) := '1111';
         ltt_Params(2) := '2222';
         ltt_Params(3) := '3333';
         ltt_Params(4) := '4444';
         SELECT
              veh_name
         BULK COLLECT INTO
              ltt_Result
         FROM
              (SELECT
                   veh_name
              FROM
                   dt_test_vehicle
              INTERSECT
              SELECT
                   column_value
              FROM
                   TABLE(CAST(ltt_Params AS dt_tt_varchar2))
         IF ltt_Result.COUNT > 0 THEN
              FOR li_Idx IN ltt_Result.FIRST..ltt_Result.LAST LOOP
                   dbms_output.put_line(ltt_Result(li_Idx));
              END LOOP;
         ELSE
              dbms_output.put_line('Nothing there, everything is good to go');
         END IF;
    END;Delete rows from the test table to see the changing results. The main reason I was thinking of this way of doing it was so you could handle your messages in one hit rather than having to have a separate exception for each parameter you are testing.
    HTH
    David
    Sorry, I just re-read your post, and you need to know if these parameters are NOT there, in which case you should give an error. In that case, you could change the INTERSECT for MINUS. If you have anything in the resulting collection, these are the parameters that are missing from the table.
    Message was edited by:
    david_tyler

  • When I go to restore my phone; is there any way to pick what you want back on your phone or do you have to get everything backed up?

    When I go to restore my phone; is there any way to pick what you want back on your phone or do you have to get everything backed up?

    Thank you.  I was afraid of that.  I backed up from iCloud.  I looked at the iTunes one - it had four different ones on there; was hoping I could see because my grandson's phone was redone last year (his mom messed it up then) and didn't know anything was backed up to iTunes.  He lost a lot of stuff that time. I'm just trying to get his phone back to par after someone changed his passcode on him as a joke and forgot what they changed it to a few days ago.  They should change it so one could go in and pick what they want or don't want.  Thank you again for your time.  I do appreciate it.

Maybe you are looking for

  • Reg:tasks are not getting displayed in the uwl mss for particular user

    hi all Tasks are not getting updated in the MSS under tasks tab for particular user in EP.can any one please share their exp and knowledge on this how to reslove it. Thanks in advance. Deepika

  • Can't resize video in Sequence monitor window anymore ???

    OK Help... I have been working on a project in CS4 and the project settings are HD 1080. I have been able to bring in other SD clips and simply "click" on the video in the monitor window and a box comes up around the video and I can resize it and the

  • Integrating Trex search With Solution manager

    HI Guys, Please help me with this . Let's say the solution manager is integrated in the SAP Portal and trex is available in the SAP portal. Can we search documents stored in the solution manager via the trex which is integrated in the SAP Portal? Is

  • Can a Nexus 1000v be configured to NOT do local switching in an ESX host?

    Before the big YES, use an external Nexus switch and use VN-Tag. The question is when there is a 3120 in a blade chassis that connects to the ESX hosts that have a 1000v installed on the ESX host. So, first hop outside the ESX host is not a Nexus box

  • Update from AE CC to CC 2014

    Sir/Mam, I have been using Adobe after effects CC from a year and want to update it to CC 2014 version. I have installed many paid plugins in it. So is there any way where I can use the plugins in AE CC 2014 without installing it again ?