Is there a way to know if you have some type of virus on your iPad? My iPad wont let me open any app

My iPad will not open any app or let me on the Internet. Could I have a virus?

There is no virus that affects an iPad or iOS unless you are
jailbroken - in that case you are on your own.
Reset the iPad by holding the home button and the on/off button
at the same time until the Apple logo appears and then let both
go. No data will be affected.
If that does not resolve the problem, connect the iPad to the
computer you normally sync with and use iTunes on that computer
to restore the iPad - first from backup and if necessary as a new
iPad.

Similar Messages

Hi I have an Ipad 3 (new ipad) and it wont let me open up the screen, it just comes up with'this machine hasnt been backed up for so many weeks, when you press ok, it just stays there and cant do anything else ???

I Have an Ipad 3 and it wont let me open the screen,it just comes up with 'This machine has not been backed up for so many weeks' and when you prsss ok nothing happens, its just locked out ,. Any Ideas ??

Have you tried a reset ? Press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider if it appears), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

My ipod wont let me buy any apps because it says i have an invalid security code for my moms credit card but its the right one. and it also says i owe money for upgrading an app does anyone know how to remove my moms credit card cause i cant figure itout

my ipod wont let me buy any appps because it says i have an invalid security code for my moms credit card but its the right one. and it also says i owe money for upgrading an app does anyone know how to remove my moms credit card cause i cant figure itout

To change asccount information see:
Changing Account Information
For the code issue this may help.
iTunes Store: My credit card's security code or zip code does not match my bank's records
For a standard iTunes account you need a valid payment method even for free apps and app updates.
What is making it think that you own money for an app upgrade?

My iPod wont let me open the App Store without crashing. Anyone know how I can fix this???

Does anyone know how to fix this?

If not successful:
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

Is there a way to know from you iBooks apple id number how old it is?

is there a systsem that tells you how old you ibook is using your compurter id number?

Hi WOZ,
Well, there is a way that takes a little bit longer, but its almost full proof. The older Apple computers use what they Gestalt IDs, but newer ones don't. The newer computers like the iBook use Machine IDs, like PowerBook6,7 (iBook G4 Mid 2005). Now the way to find the Machine ID on your computer is to go to /Applications/Utlities/System Profiler and look under Hardware. You should see under Machine Model (for the iBook) PowerBook,. You can find more Machine IDs and Gestalt IDs at The Apple Museum.
I hope that helps,
Jon
PS I'd rather look them up this way instead of downloading software. TinkerTool is for getting access to more preferences, thats not really what you want.

Is there a way to watch shows you have purchased on iTunes without downloading them directly to your iPad other than iCloud?

I just purchased one season of a tv show on iTunes for the first time but it takes up more memory than I even have - each episode is 1.4GB!!. I know about iCloud but that only gives you 5GB and I purchased a whole season. How are people able to download so many shows and movies if they take up this much memory?

iTunes purchased items do not count against your free 5 GB iCloud storage. Thus, you can just delete the ones you do not what now and then redownload them later.
Your iCloud account includes 5 GB of free storage for Mail, Documents, and your iCloud Backup. Your purchased music, apps, books, and TV shows, as well as your Photo Stream, don’t count against the 5 GB of free storage.
http://support.apple.com/kb/PH2615

The best way to know if you a data in a table

hello
I have a doubt what 's the best way to know if you have a value in a table .For example I have a table called Vehicle , that have two rows id and name . Well I want to know before do somthing if the vehicle with mane '11111', exist or not .
Nowadays i do this operation with a : select count ( id ) into num from vehicle;
This is the best way ???
THANKS

Hello
Well here's an alternative that may help in your situation. The idea is that you put all of your values that you will be testing for the existence of, in a collection. Then use INTERSECT to find out which of those are already present in the table.
It may well turn out to be completely useless, but I'm trying to avoid working on what I am supposed to be working on, and I thought I'd try it out ;-)
CREATE TABLE dt_test_vehicle(veh_name     VARCHAR2(20));
INSERT INTO dt_test_vehicle values('1111');
INSERT INTO dt_test_vehicle values('2222');
INSERT INTO dt_test_vehicle values('4444');
INSERT INTO dt_test_vehicle values('5555');
INSERT INTO dt_test_vehicle values('6666');
CREATE TYPE dt_tt_varchar2 IS TABLE OF VARCHAR2(20)
set serveroutput on
DECLARE
     ltt_Params     dt_tt_varchar2;
     ltt_Result     dt_tt_varchar2;
BEGIN
     ltt_Params := dt_tt_varchar2();
     ltt_Params.EXTEND(4);
     ltt_Params(1) := '1111';
     ltt_Params(2) := '2222';
     ltt_Params(3) := '3333';
     ltt_Params(4) := '4444';
     SELECT
          veh_name
     BULK COLLECT INTO
          ltt_Result
     FROM
          (SELECT
               veh_name
          FROM
               dt_test_vehicle
          INTERSECT
          SELECT
               column_value
          FROM
               TABLE(CAST(ltt_Params AS dt_tt_varchar2))
     IF ltt_Result.COUNT > 0 THEN
          FOR li_Idx IN ltt_Result.FIRST..ltt_Result.LAST LOOP
               dbms_output.put_line(ltt_Result(li_Idx));
          END LOOP;
     ELSE
          dbms_output.put_line('Nothing there, everything is good to go');
     END IF;
END;Delete rows from the test table to see the changing results. The main reason I was thinking of this way of doing it was so you could handle your messages in one hit rather than having to have a separate exception for each parameter you are testing.
HTH
David
Sorry, I just re-read your post, and you need to know if these parameters are NOT there, in which case you should give an error. In that case, you could change the INTERSECT for MINUS. If you have anything in the resulting collection, these are the parameters that are missing from the table.
Message was edited by:
david_tyler

Is there a way to know how many hours of work did a project demanded ?

Is there a way to know how many hours of work did a project demanded (even if it was on multiple days, sessions or cross-working other projects)?
I am using Adobe Premiere Pro CS6 on windows 7.
Thaks,
Mihai

There is no feature for that in Premiere Pro. I suggest that you keep a project log either in a spreadsheet, database, Notepad or Wordpad file, or a hand written one.
You can file a feature request here:
Adobe - Feature Request/Bug Report Form

Is there a way to know how many minutes left from ...

Is there a way to know how many minutes left from your subscription from the Skype phone app??
Thanks!

Hi, Konfuzed,
Thanks for your inquiry. The Skype Mobile apps look a bit different. In order for the Skype Community to help you, some more information would be helpful:
- Hardware you use (phone/tablet brand and model)
- Its operating system (version and updates installed)
- Skype version used
Thanks in advance.
- Skype Community Moderation Team
Was your question answered? Please click on the Accept as a Solution link so everyone can quickly find what works! Like a post or want to say, "Thank You" - ?? Click on the Kudos button!
Trustworthy information: Brian Krebs: 3 Basic Rules for Online Safety and Consumer Reports: Guide to Internet Security Online Safety Tip: Change your passwords often!

Is there a way of knowing which external drive ejects?

Is there a way of knowing which external drive ejects?
I have several external drives and when one ejects on it's own it usually immediately restarts again and does not give me time to find which one was the problem drive.
Is there a way of figuring this out?
Thank you!

No unfortunately without restoring the library and running it there is no way to tell if it is good or not.
regards

Is there a way track who you have distributed the form to and who has responded? If yes, is there a way to message all that have not responded?

Is there a way track who you have distributed the form to and who has responded? If yes, is there a way to message all that have not responded? This would be a great way to manage supplier questionnaires to ensure everyone is providing information back to you.

FormsCentral, itself, does not have a method of distributing forms, so it would not know about your distribution list. It's either an open online form, which can be gotten to by anyone with the URL, or it's a pdf, which could be distributed via e-mail or a web page download.
You can always track the completion of the form by looking in the form's collected data set. Then, you could work backward to contact those recipients who have not yet responded. But that means you need to keep track of where the form was sent, or at least know which people/companies were supposed to get the form.
I hope that helps,
Brian

Is there a way to know what uses the 3gdata in my iphone? ex: what app or ios fonction...

i have 21474k on my bill frequently, sometime when i sleep my data is unsed like this and i cant find where it come from. is it an app? is it ios6? is there a way to know how our data is used?

Hi answeet,
Welcome to the Support Communities!
The article below may be able to help you with this:
iOS: About cellular data usage
http://support.apple.com/kb/HT4146
Cheers,
- Judy

Is there a way to know if class field is an array (reflection) ?

Hi, everyone,
Like subject says, is there a way to know if class field
is an array and instance ? I suppose, reflection could
help with that, but don't know exactly.
I have a class:
public class A {
public B b[];
//other fields
B is another class.
public class B {
public C c;
//other fields
So, it is important for me to know if class A field b
is an array and instance.
Oh, and one more thing, how to initialize instance b
through class A using reflection (i suppose), and to
go through class B, and again get information about
what fields and what are they (are they instances,
arrays and so on). The same thing with class C ...
I mean, if class (like A) has an instance b, i would
like to get all information, if class B of this instance
b has its own instances, and so on. And additionally,
as mentioned above, i'd like to know if these instances
(like b) are arrays.
I think you got whole idea - how to go through class
hierarchy and get information about class fields
(instances esspecially).
If someone knows, please reply.
Thanks in advance.

Thanks, that'll do for finding out if instance is
an array.
I know that my subject line doesn't sound quite right,
sorry :)
But there is more things i need information about.

I've a problem which is: Ibelieve there's someone who knows my password in some games like "Happy Day" so, could you please help me by not letting anybody to use this game except for this IMEI 01 336000 521261 1 even if they have the correct password.

I've a problem which is: Ibelieve there's someone who knows my password in some games like "Happy Day" so, could you please help me by not letting anybody to use this game except for this IMEI 01 336000 521261 1 even if they have the correct password. Thanks alot for your help.

Change your password.
These are user forums. We can't do what you ask, in fact no one can.

Is there a way to know what report is being processed ?

In XI R2 / Webi Report Server, or XI 3.x / Webi Processing Server, is there a way to know what object is being processed ?
For example currently, I can see thru system tool like "Process Explorer" that "wireportserver.exe" has been using a lot of CPU and increasing memory for several minutes. I feel that a report is too large or complicated, but which one ?
In audit database, I can only see events like "document read", but no "begin of refresh process".
So, do I have to wait for the process to be finished to find a "document refreshed" and know what was going on ?
Moreover, at least in R2, if user cancels his refresh request (by closing his browser for example), of if request takes too much time and reaches timeout, no audit event corresponding to this refresh request will ever be recorded. In this case, I have no information at all about what report was making the report server taking so much CPU and RAM. It has just a "read" event, but so have a lot of other reports having been read during the same period of time.
Ideally, I would just have to select the latest "begin of refresh" events without "end of refresh" to know which report are currently being processed. But unfortunately the first one doesn't exist.
Has anyone an idea to get this information anyway ?
Thanks

Hello Seb
Thanks for your reply.
I was aware of this instance manager in 3.x.
In R2, I was also able to do the same with a request thru the query manager.
Unfortunately in both versions , I haven't found yet how to find informations on report being refreshed by users directly, and not by job server.
I anyone has an idea...
In R2 I have tested the -trace option of report server : it generates a big amount of lines in trace files, but that seem completely useless : no information on what report is being processed..
I don't understant why this information is so complicated to get. It could be so helpfull...
regards
François

Is there a way to know if you have some type of virus on your iPad? My iPad wont let me open any app

Similar Messages

Maybe you are looking for